Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1705740 > unrolled thread

[PATCH v4 2/5] dt-bindings: add binding for Sitronix ST7586 display panels

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v4 2/5] dt-bindings: add binding for Sitronix ST7586 display panels David Lechner <david@lechnology.com> - 2017-08-07 19:50 +0200
    Re: [PATCH v4 2/5] dt-bindings: add binding for Sitronix ST7586  display panels Rob Herring <robh@kernel.org> - 2017-08-10 23:10 +0200

#1705740 — [PATCH v4 2/5] dt-bindings: add binding for Sitronix ST7586 display panels

This adds a new binding for Sitronix ST7586 display panels.

Using lego as the vendor prefix in the compatible string because the display
panel I am working with is an integral part of the LEGO MINDSTORMS EV3.

Signed-off-by: David Lechner <david@lechnology.com>
---

v4 changes:
* Dropped optional properties and only use pins actually used on LEGO EV3.
* Rename dc to a0 since that is what is on the datasheet/LEGO schematic.


 .../bindings/display/sitronix,st7586.txt           | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/sitronix,st7586.txt

diff --git a/Documentation/devicetree/bindings/display/sitronix,st7586.txt b/Documentation/devicetree/bindings/display/sitronix,st7586.txt
new file mode 100644
index 0000000..1d0dad1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sitronix,st7586.txt
@@ -0,0 +1,22 @@
+Sitronix ST7586 display panel
+
+Required properties:
+- compatible:	"lego,ev3-lcd".
+- a0-gpios:	The A0 signal (since this binding is for serial mode, this is
+                the pin labeled D1 on the controller, not the pin labeled A0)
+- reset-gpios:	Reset pin
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+	display@0{
+		compatible = "lego,ev3-lcd";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+	};
-- 
2.7.4

[toc] | [next] | [standalone]

#1709027 — Re: [PATCH v4 2/5] dt-bindings: add binding for Sitronix ST7586 display panels

On Mon, Aug 07, 2017 at 12:39:38PM -0500, David Lechner wrote:
> This adds a new binding for Sitronix ST7586 display panels.
> 
> Using lego as the vendor prefix in the compatible string because the display
> panel I am working with is an integral part of the LEGO MINDSTORMS EV3.
> 
> Signed-off-by: David Lechner <david@lechnology.com>
> ---
> 
> v4 changes:
> * Dropped optional properties and only use pins actually used on LEGO EV3.
> * Rename dc to a0 since that is what is on the datasheet/LEGO schematic.
> 
> 
>  .../bindings/display/sitronix,st7586.txt           | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/sitronix,st7586.txt

Acked-by: Rob Herring <robh@kernel.org>

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web