Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1702751 > unrolled thread

[PATCH v3 4/5] dt-bindings: phy-rockchip-inno-usb2: add otg-mux interrupt

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v3 4/5] dt-bindings: phy-rockchip-inno-usb2: add otg-mux interrupt Frank Wang <frank.wang@rock-chips.com> - 2017-08-03 10:10 +0200
    Re: [PATCH v3 4/5] dt-bindings: phy-rockchip-inno-usb2: add otg-mux  interrupt Rob Herring <robh@kernel.org> - 2017-08-10 19:10 +0200
      Re: [PATCH v3 4/5] dt-bindings: phy-rockchip-inno-usb2: add otg-mux  interrupt Frank Wang <frank.wang@rock-chips.com> - 2017-08-11 03:50 +0200

#1702751 — [PATCH v3 4/5] dt-bindings: phy-rockchip-inno-usb2: add otg-mux interrupt

Add otg-mux property to support multiplexed interrupt in otg-port
on some Rockchip SoC (e.g RV1108).

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
---
 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
index ddf868a..ed6aee4 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -32,10 +32,14 @@ Required nodes : a sub-node is required for each port the phy provides.
 Required properties (port (child) node):
  - #phy-cells : must be 0. See ./phy-bindings.txt for details.
  - interrupts : specify an interrupt for each entry in interrupt-names.
- - interrupt-names : a list which shall be the following entries:
+ - interrupt-names : a list which should be one of the following cases:
+	Regular case:
 	* "otg-id" : for the otg id interrupt.
 	* "otg-bvalid" : for the otg vbus interrupt.
 	* "linestate" : for the host/otg linestate interrupt.
+	Some SoCs use one interrupt with the obove muxed together, so for these
+	* "otg-mux" : otg-port interrupt, which mux otg-id/otg-bvalid/linestate
+		to one.
 
 Optional properties:
  - phy-supply : phandle to a regulator that provides power to VBUS.
-- 
2.0.0

[toc] | [next] | [standalone]

#1708906 — Re: [PATCH v3 4/5] dt-bindings: phy-rockchip-inno-usb2: add otg-mux interrupt

On Thu, Aug 03, 2017 at 04:09:12PM +0800, Frank Wang wrote:
> Add otg-mux property to support multiplexed interrupt in otg-port
> on some Rockchip SoC (e.g RV1108).
> 
> Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
> ---
>  Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
> index ddf868a..ed6aee4 100644
> --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
> @@ -32,10 +32,14 @@ Required nodes : a sub-node is required for each port the phy provides.
>  Required properties (port (child) node):
>   - #phy-cells : must be 0. See ./phy-bindings.txt for details.
>   - interrupts : specify an interrupt for each entry in interrupt-names.
> - - interrupt-names : a list which shall be the following entries:
> + - interrupt-names : a list which should be one of the following cases:
> +	Regular case:
>  	* "otg-id" : for the otg id interrupt.
>  	* "otg-bvalid" : for the otg vbus interrupt.
>  	* "linestate" : for the host/otg linestate interrupt.
> +	Some SoCs use one interrupt with the obove muxed together, so for these

s/obove/above/

With that,

Acked-by: Rob Herring <robh@kernel.org>

[toc] | [prev] | [next] | [standalone]

#1709164 — Re: [PATCH v3 4/5] dt-bindings: phy-rockchip-inno-usb2: add otg-mux interrupt

Hi Rob,

On 2017/8/11 1:06, Rob Herring wrote:
> On Thu, Aug 03, 2017 at 04:09:12PM +0800, Frank Wang wrote:
>> Add otg-mux property to support multiplexed interrupt in otg-port
>> on some Rockchip SoC (e.g RV1108).
>>
>> Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
>> ---
>>   Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt | 6 +++++-
>>   1 file changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
>> index ddf868a..ed6aee4 100644
>> --- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
>> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
>> @@ -32,10 +32,14 @@ Required nodes : a sub-node is required for each port the phy provides.
>>   Required properties (port (child) node):
>>    - #phy-cells : must be 0. See ./phy-bindings.txt for details.
>>    - interrupts : specify an interrupt for each entry in interrupt-names.
>> - - interrupt-names : a list which shall be the following entries:
>> + - interrupt-names : a list which should be one of the following cases:
>> +	Regular case:
>>   	* "otg-id" : for the otg id interrupt.
>>   	* "otg-bvalid" : for the otg vbus interrupt.
>>   	* "linestate" : for the host/otg linestate interrupt.
>> +	Some SoCs use one interrupt with the obove muxed together, so for these
> s/obove/above/

Sorry, thanks for your reminding and will fix.


BR.
Frank

>
> With that,
>
> Acked-by: Rob Herring <robh@kernel.org>
>
>
>

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web