Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1702636 > unrolled thread

[PATCH v2 3/5] dt-binding: soc: qcom: Add binding for RFSA

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v2 3/5] dt-binding: soc: qcom: Add binding for RFSA Bjorn Andersson <bjorn.andersson@linaro.org> - 2017-08-03 05:00 +0200
    Re: [PATCH v2 3/5] dt-binding: soc: qcom: Add binding for RFSA Rob Herring <robh@kernel.org> - 2017-08-10 19:00 +0200

#1702636 — [PATCH v2 3/5] dt-binding: soc: qcom: Add binding for RFSA

This adds the binding for describing shared memory used to exchange file
system blocks between the RMTFS client and service.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changed since v1:
- Memory described in a single reserved-memory node, rather than by reference
  from a "dummy" node
- qcom,vmdid added

 .../bindings/reserved-memory/qcom,rfsa.txt         | 51 ++++++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reserved-memory/qcom,rfsa.txt

diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rfsa.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,rfsa.txt
new file mode 100644
index 000000000000..d9bec8eec696
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/qcom,rfsa.txt
@@ -0,0 +1,51 @@
+Qualcomm Remote File System Access binding
+
+This binding describes the Qualcomm RFSA, which serves the purpose of
+describing the shared memory region used for remote processors to access block
+device data using the Remote Filesystem protocol.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be:
+		    "qcom,rfsa"
+
+- reg:
+	Usage: required for static allocation
+	Value type: <prop-encoded-array>
+	Definition: must specify base address and size of the memory region,
+		    as described in reserved-memory.txt
+
+- size:
+	Usage: required for dynamic allocation
+	Value type: <prop-encoded-array>
+	Definition: must specify a size of the memory region, as described in
+		    reserved-memory.txt
+
+- qcom,client-id:
+	Usage: required
+	Value type: <u32>
+	Definition: identifier of the client to use this region for buffers.
+
+- qcom,vmid:
+	Usage: optional
+	Value type: <u32>
+	Definition: vmid of the remote processor, to set up memory protection.
+
+= EXAMPLE
+The following example shows the RFSA setup for APQ8016, with the RFSA region
+for the Hexagon DSP (id #1) located at 0x86700000.
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rmtfs@86700000 {
+			compatible = "qcom,rfsa";
+			reg = <0x0 0x86700000 0x0 0xe0000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
-- 
2.12.0

[toc] | [next] | [standalone]

#1708894

On Wed, Aug 02, 2017 at 07:57:52PM -0700, Bjorn Andersson wrote:
> This adds the binding for describing shared memory used to exchange file
> system blocks between the RMTFS client and service.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> Changed since v1:
> - Memory described in a single reserved-memory node, rather than by reference
>   from a "dummy" node
> - qcom,vmdid added
> 
>  .../bindings/reserved-memory/qcom,rfsa.txt         | 51 ++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reserved-memory/qcom,rfsa.txt

Acked-by: Rob Herring <robh@kernel.org>

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web