Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1704705 > unrolled thread

[PATCH net-next v2 1/3] net: dsa: remove useless argument in legacy setup

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH net-next v2 1/3] net: dsa: remove useless argument in legacy setup Vivien Didelot <vivien.didelot@savoirfairelinux.com> - 2017-08-05 22:30 +0200
    Re: [PATCH net-next v2 1/3] net: dsa: remove useless argument in  legacy setup Florian Fainelli <f.fainelli@gmail.com> - 2017-08-06 19:50 +0200

#1704705 — [PATCH net-next v2 1/3] net: dsa: remove useless argument in legacy setup

dsa_switch_alloc() already assigns ds-dev, which can be used in
dsa_switch_setup_one and dsa_cpu_dsa_setups instead of requiring an
additional struct device argument.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
 net/dsa/legacy.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/net/dsa/legacy.c b/net/dsa/legacy.c
index 1d7a3282f2a7..fa162030a69c 100644
--- a/net/dsa/legacy.c
+++ b/net/dsa/legacy.c
@@ -78,7 +78,7 @@ dsa_switch_probe(struct device *parent, struct device *host_dev, int sw_addr,
 }
 
 /* basic switch operations **************************************************/
-static int dsa_cpu_dsa_setups(struct dsa_switch *ds, struct device *dev)
+static int dsa_cpu_dsa_setups(struct dsa_switch *ds)
 {
 	struct dsa_port *dport;
 	int ret, port;
@@ -88,15 +88,15 @@ static int dsa_cpu_dsa_setups(struct dsa_switch *ds, struct device *dev)
 			continue;
 
 		dport = &ds->ports[port];
-		ret = dsa_cpu_dsa_setup(ds, dev, dport, port);
+		ret = dsa_cpu_dsa_setup(ds, ds->dev, dport, port);
 		if (ret)
 			return ret;
 	}
 	return 0;
 }
 
-static int dsa_switch_setup_one(struct dsa_switch *ds, struct net_device *master,
-				struct device *parent)
+static int dsa_switch_setup_one(struct dsa_switch *ds,
+				struct net_device *master)
 {
 	const struct dsa_switch_ops *ops = ds->ops;
 	struct dsa_switch_tree *dst = ds->dst;
@@ -176,7 +176,7 @@ static int dsa_switch_setup_one(struct dsa_switch *ds, struct net_device *master
 	}
 
 	if (!ds->slave_mii_bus && ops->phy_read) {
-		ds->slave_mii_bus = devm_mdiobus_alloc(parent);
+		ds->slave_mii_bus = devm_mdiobus_alloc(ds->dev);
 		if (!ds->slave_mii_bus)
 			return -ENOMEM;
 		dsa_slave_mii_bus_init(ds);
@@ -196,14 +196,14 @@ static int dsa_switch_setup_one(struct dsa_switch *ds, struct net_device *master
 		if (!(ds->enabled_port_mask & (1 << i)))
 			continue;
 
-		ret = dsa_slave_create(ds, parent, i, cd->port_names[i]);
+		ret = dsa_slave_create(ds, ds->dev, i, cd->port_names[i]);
 		if (ret < 0)
 			netdev_err(master, "[%d]: can't create dsa slave device for port %d(%s): %d\n",
 				   index, i, cd->port_names[i], ret);
 	}
 
 	/* Perform configuration of the CPU and DSA ports */
-	ret = dsa_cpu_dsa_setups(ds, parent);
+	ret = dsa_cpu_dsa_setups(ds);
 	if (ret < 0)
 		netdev_err(master, "[%d] : can't configure CPU and DSA ports\n",
 			   index);
@@ -252,7 +252,7 @@ dsa_switch_setup(struct dsa_switch_tree *dst, struct net_device *master,
 	ds->ops = ops;
 	ds->priv = priv;
 
-	ret = dsa_switch_setup_one(ds, master, parent);
+	ret = dsa_switch_setup_one(ds, master);
 	if (ret)
 		return ERR_PTR(ret);
 
-- 
2.13.3

[toc] | [next] | [standalone]

#1704933 — Re: [PATCH net-next v2 1/3] net: dsa: remove useless argument in legacy setup

On 08/05/2017 01:20 PM, Vivien Didelot wrote:
> dsa_switch_alloc() already assigns ds-dev, which can be used in
> dsa_switch_setup_one and dsa_cpu_dsa_setups instead of requiring an
> additional struct device argument.
> 
> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web