Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1699726 > unrolled thread

[PATCH v6 1/7] dt-bindings: phy: qmp: Add output-clock-names

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v6 1/7] dt-bindings: phy: qmp: Add output-clock-names Varadarajan Narayanan <varada@codeaurora.org> - 2017-07-31 08:40 +0200
    Re: [PATCH v6 1/7] dt-bindings: phy: qmp: Add output-clock-names Bjorn Helgaas <helgaas@kernel.org> - 2017-08-04 01:10 +0200

#1699726 — [PATCH v6 1/7] dt-bindings: phy: qmp: Add output-clock-names

The phy outputs a clock that will act as the parent for
the phy's pipe clock. Add the name of this clock to the
lane's DT node.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index e11c563..5d7a51f 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -60,6 +60,8 @@ Required properties for child node:
 	   one for each entry in clock-names.
  - clock-names: Must contain following for pcie and usb qmp phys:
 		 "pipe<lane-number>" for pipe clock specific to each lane.
+ - clock-output-names: Name of the phy clock that will be the parent for
+		       the above pipe clock.
 
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
@@ -96,6 +98,7 @@ Example:
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 			clock-names = "pipe0";
+			clock-output-names = "pcie_0_pipe_clk_src";
 			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
 			reset-names = "lane0";
 		};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[toc] | [next] | [standalone]

#1703496

On Mon, Jul 31, 2017 at 12:04:11PM +0530, Varadarajan Narayanan wrote:
> The phy outputs a clock that will act as the parent for
> the phy's pipe clock. Add the name of this clock to the

s/phy/PHY/

> lane's DT node.
> 
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> index e11c563..5d7a51f 100644
> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> @@ -60,6 +60,8 @@ Required properties for child node:
>  	   one for each entry in clock-names.
>   - clock-names: Must contain following for pcie and usb qmp phys:
>  		 "pipe<lane-number>" for pipe clock specific to each lane.
> + - clock-output-names: Name of the phy clock that will be the parent for
> +		       the above pipe clock.

s/phy/PHY/ (this file is a hodge-podge so I guess this isn't making it much
worse)

>  
>   - resets: a list of phandles and reset controller specifier pairs,
>  	   one for each entry in reset-names.
> @@ -96,6 +98,7 @@ Example:
>  
>  			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
>  			clock-names = "pipe0";
> +			clock-output-names = "pcie_0_pipe_clk_src";
>  			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
>  			reset-names = "lane0";
>  		};
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
> 

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web