Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1699589 > unrolled thread

[PATCH v2 net-next 2/4] net: dsa: lan9303: Multiply by 4 to get MDIO register

Started byEgil Hjelmeland <privat@egil-hjelmeland.no>
First post2017-07-30 20:00 +0200
Last post2017-07-30 20:00 +0200
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  [PATCH v2 net-next 2/4] net: dsa: lan9303: Multiply by 4 to get MDIO register Egil Hjelmeland <privat@egil-hjelmeland.no> - 2017-07-30 20:00 +0200

#1699589 — [PATCH v2 net-next 2/4] net: dsa: lan9303: Multiply by 4 to get MDIO register

FromEgil Hjelmeland <privat@egil-hjelmeland.no>
Date2017-07-30 20:00 +0200
Subject[PATCH v2 net-next 2/4] net: dsa: lan9303: Multiply by 4 to get MDIO register
Message-ID<u90Fr-3qN-3@gated-at.bofh.it>
lan9303_mdio_write()/_read() must multiply register number by 4 to get
offset.

Added some commments to the register definitions.

Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/lan9303-core.c | 6 ++++++
 drivers/net/dsa/lan9303_mdio.c | 2 ++
 2 files changed, 8 insertions(+)

diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index 9d0ab77edb4a..96ebeb9bd59a 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -20,6 +20,9 @@
 
 #include "lan9303.h"
 
+/* 13.2 System Control and Status Registers
+ * Multiply register number by 4 to get address offset.
+ */
 #define LAN9303_CHIP_REV 0x14
 # define LAN9303_CHIP_ID 0x9303
 #define LAN9303_IRQ_CFG 0x15
@@ -53,6 +56,9 @@
 #define LAN9303_VIRT_PHY_BASE 0x70
 #define LAN9303_VIRT_SPECIAL_CTRL 0x77
 
+/*13.4 Switch Fabric Control and Status Registers
+ * Accessed indirectly via SWITCH_CSR_CMD, SWITCH_CSR_DATA.
+ */
 #define LAN9303_SW_DEV_ID 0x0000
 #define LAN9303_SW_RESET 0x0001
 #define LAN9303_SW_RESET_RESET BIT(0)
diff --git a/drivers/net/dsa/lan9303_mdio.c b/drivers/net/dsa/lan9303_mdio.c
index 93c36c0541cf..2db7970fc88c 100644
--- a/drivers/net/dsa/lan9303_mdio.c
+++ b/drivers/net/dsa/lan9303_mdio.c
@@ -40,6 +40,7 @@ static int lan9303_mdio_write(void *ctx, uint32_t reg, uint32_t val)
 {
 	struct lan9303_mdio *sw_dev = (struct lan9303_mdio *)ctx;
 
+	reg <<= 2; /* reg num to offset */
 	mutex_lock(&sw_dev->device->bus->mdio_lock);
 	lan9303_mdio_real_write(sw_dev->device, reg, val & 0xffff);
 	lan9303_mdio_real_write(sw_dev->device, reg + 2, (val >> 16) & 0xffff);
@@ -57,6 +58,7 @@ static int lan9303_mdio_read(void *ctx, uint32_t reg, uint32_t *val)
 {
 	struct lan9303_mdio *sw_dev = (struct lan9303_mdio *)ctx;
 
+	reg <<= 2; /* reg num to offset */
 	mutex_lock(&sw_dev->device->bus->mdio_lock);
 	*val = lan9303_mdio_real_read(sw_dev->device, reg);
 	*val |= (lan9303_mdio_real_read(sw_dev->device, reg + 2) << 16);
-- 
2.11.0

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web