Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1699326 > unrolled thread

[PATCH v3 00/12] ASoC: Add I2S support for Allwinner H3 SoCs

Started bycodekipper@gmail.com
First post2017-07-29 16:20 +0200
Last post2017-07-31 09:10 +0200
Articles 7 — 3 participants

Back to article view | Back to linux.kernel


Contents

  [PATCH v3 00/12] ASoC: Add I2S support for Allwinner H3 SoCs codekipper@gmail.com - 2017-07-29 16:20 +0200
    [PATCH v3 05/12] ASoC: sun4i-i2s: Add regmap fields for channels codekipper@gmail.com - 2017-07-29 16:20 +0200
      Re: [alsa-devel] [PATCH v3 05/12] ASoC: sun4i-i2s: Add regmap fields  for channels kbuild test robot <lkp@intel.com> - 2017-07-30 18:50 +0200
      [PATCH] ASoC: sun4i-i2s: fix ptr_ret.cocci warnings kbuild test robot <lkp@intel.com> - 2017-07-30 18:50 +0200
    [PATCH v3 03/12] ASoC: sun4i-i2s: Add regmap config to quirks codekipper@gmail.com - 2017-07-29 16:30 +0200
    [PATCH v3 01/12] ASoC: sun4i-i2s: Extend quirks scope codekipper@gmail.com - 2017-07-29 16:30 +0200
    Re: [linux-sunxi] [PATCH v3 00/12] ASoC: Add I2S support for  Allwinner H3 SoCs Olliver Schinagl <oliver+list@schinagl.nl> - 2017-07-31 09:10 +0200

#1699326 — [PATCH v3 00/12] ASoC: Add I2S support for Allwinner H3 SoCs

Fromcodekipper@gmail.com
Date2017-07-29 16:20 +0200
Subject[PATCH v3 00/12] ASoC: Add I2S support for Allwinner H3 SoCs
Message-ID<u8AKZ-3qk-3@gated-at.bofh.it>
From: Marcus Cooper <codekipper@gmail.com>

Hi All,
please find attached a series of patches to bring i2s support to the
Allwinner H3 SoC. This has been tested with the following setups:

A20 Olimex EVB connected to a pcm5102
Orange Pi 2 connected to a uda1380
Orange Pi 2 hdmi audio playback
Pine 64 connected to the audio DAC board

To get i2s working some additional patches are required which will be
delivered later. For now they have been pushed here

https://github.com/codekipper/linux-sunxi/commits/sunxi-audio-h3

I don't own a A33 device which uses the i2s block for the audio codec
so if someone could test against that it would be much appreciated.

I'm also wondering if there is a preferred way of setting the lrclk
size in the dts?..currently it is set to the sample width but for example
the pcm5102a wants it to be 32 bits whatever the sample rate.

Thanks in advance,
CK

---

v3 changes compared to v2 are:
- initial changes to prepare driver for newer SoCs has been broken down
  into smaller patches
- reduce use of regmap fields to where just needed.
- clkdiv expansion will be delivered later.
- defines for H3 variant segregated.
- fixed regmap config issue with SUN8I_I2S_FIFO_TX_REG.


v2 changes compared to v1 are:
 - massive refactoring to remove duplicate code making use of regmap_fields.
 - extending the clock divisors.
 - removed code that should be delivered when we support 20/24bits

---

Marcus Cooper (12):
  ASoC: sun4i-i2s: Extend quirks scope
  ASoC: sun4i-i2s: Add clkdiv offsets to quirks
  ASoC: sun4i-i2s: Add regmap config to quirks
  ASoC: sun4i-i2s: Add TX FIFO offset to quirks
  ASoC: sun4i-i2s: Add regmap fields for channels
  ASoC: sun4i-i2s: Add changes for wss and sr
  ASoC: sun4i-i2s: bclk and lrclk polarity tidyup
  ASoC: sun4i-i2s: Add mclk enable regmap field
  ASoC: sun4i-i2s: Add regmap field to set format
  ASoC: sun4i-i2s: Check for slave select bit
  ASoC: sun4i-i2s: Update global enable with bitmask
  ASoC: sun4i-i2s: Add support for H3

 .../devicetree/bindings/sound/sun4i-i2s.txt        |   2 +
 sound/soc/sunxi/sun4i-i2s.c                        | 460 ++++++++++++++++++---
 2 files changed, 398 insertions(+), 64 deletions(-)

-- 
2.13.3

[toc] | [next] | [standalone]


#1699327 — [PATCH v3 05/12] ASoC: sun4i-i2s: Add regmap fields for channels

Fromcodekipper@gmail.com
Date2017-07-29 16:20 +0200
Subject[PATCH v3 05/12] ASoC: sun4i-i2s: Add regmap fields for channels
Message-ID<u8AL0-3qk-23@gated-at.bofh.it>
In reply to#1699326
From: Marcus Cooper <codekipper@gmail.com>

On the original i2s block the channel mapping and selection were
configured for stereo audio by default: This is not the case with
the newer SoCs and they are also located at different offsets.

To support the newer SoC then regmap fields have been added to the
quirks and these are initialised to their correct settings during
probing.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 80 ++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 72 insertions(+), 8 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 2a25df22c2f8..120f797a38e8 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -82,7 +82,7 @@
 #define SUN4I_I2S_TX_CNT_REG		0x2c
 
 #define SUN4I_I2S_TX_CHAN_SEL_REG	0x30
-#define SUN4I_I2S_TX_CHAN_SEL(num_chan)		(((num_chan) - 1) << 0)
+#define SUN4I_I2S_CHAN_SEL(num_chan)		(((num_chan) - 1) << 0)
 
 #define SUN4I_I2S_TX_CHAN_MAP_REG	0x34
 #define SUN4I_I2S_TX_CHAN_MAP(chan, sample)	((sample) << (chan << 2))
@@ -98,6 +98,10 @@
  * @sun4i_i2s_regmap: regmap config to use.
  * @mclk_offset: Value by which mclkdiv needs to be adjusted.
  * @bclk_offset: Value by which bclkdiv needs to be adjusted.
+ * @field_txchanmap: location of the tx channel mapping register.
+ * @field_rxchanmap: location of the rx channel mapping register.
+ * @field_txchansel: location of the tx channel select bit fields.
+ * @field_rxchansel: location of the rx channel select bit fields.
  */
 struct sun4i_i2s_quirks {
 	bool				has_reset;
@@ -105,6 +109,12 @@ struct sun4i_i2s_quirks {
 	const struct regmap_config	*sun4i_i2s_regmap;
 	unsigned int			mclk_offset;
 	unsigned int			bclk_offset;
+
+	/* Register fields for i2s */
+	struct reg_field		field_txchanmap;
+	struct reg_field		field_rxchanmap;
+	struct reg_field		field_txchansel;
+	struct reg_field		field_rxchansel;
 };
 
 struct sun4i_i2s {
@@ -118,6 +128,12 @@ struct sun4i_i2s {
 	struct snd_dmaengine_dai_dma_data	capture_dma_data;
 	struct snd_dmaengine_dai_dma_data	playback_dma_data;
 
+	/* Register fields for i2s */
+	struct regmap_field	*field_txchanmap;
+	struct regmap_field	*field_rxchanmap;
+	struct regmap_field	*field_txchansel;
+	struct regmap_field	*field_rxchansel;
+
 	const struct sun4i_i2s_quirks	*variant;
 };
 
@@ -264,6 +280,18 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
 	if (params_channels(params) != 2)
 		return -EINVAL;
 
+	/* Map the channels for playback and capture */
+	regmap_field_write(i2s->field_txchanmap, 0x76543210);
+	regmap_field_write(i2s->field_rxchanmap, 0x00003210);
+
+	/* Configure the channels */
+	regmap_field_write(i2s->field_txchansel,
+			   SUN4I_I2S_CHAN_SEL(params_channels(params)));
+
+	regmap_field_write(i2s->field_rxchansel,
+			   SUN4I_I2S_CHAN_SEL(params_channels(params)));
+
+
 	switch (params_physical_width(params)) {
 	case 16:
 		width = DMA_SLAVE_BUSWIDTH_2_BYTES;
@@ -486,13 +514,6 @@ static int sun4i_i2s_startup(struct snd_pcm_substream *substream,
 			   SUN4I_I2S_CTRL_SDO_EN_MASK,
 			   SUN4I_I2S_CTRL_SDO_EN(0));
 
-	/* Enable the first two channels */
-	regmap_write(i2s->regmap, SUN4I_I2S_TX_CHAN_SEL_REG,
-		     SUN4I_I2S_TX_CHAN_SEL(2));
-
-	/* Map them to the two first samples coming in */
-	regmap_write(i2s->regmap, SUN4I_I2S_TX_CHAN_MAP_REG,
-		     SUN4I_I2S_TX_CHAN_MAP(0, 0) | SUN4I_I2S_TX_CHAN_MAP(1, 1));
 
 	return clk_prepare_enable(i2s->mod_clk);
 }
@@ -677,14 +698,51 @@ static const struct sun4i_i2s_quirks sun4i_a10_i2s_quirks = {
 	.has_reset		= false,
 	.reg_offset_txdata	= SUN4I_I2S_FIFO_TX_REG,
 	.sun4i_i2s_regmap	= &sun4i_i2s_regmap_config,
+	.field_txchanmap	= REG_FIELD(SUN4I_I2S_TX_CHAN_MAP_REG, 0, 31),
+	.field_rxchanmap	= REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31),
+	.field_txchansel	= REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2),
+	.field_rxchansel	= REG_FIELD(SUN4I_I2S_RX_CHAN_SEL_REG, 0, 2),
 };
 
 static const struct sun4i_i2s_quirks sun6i_a31_i2s_quirks = {
 	.has_reset		= true,
 	.reg_offset_txdata	= SUN4I_I2S_FIFO_TX_REG,
 	.sun4i_i2s_regmap	= &sun4i_i2s_regmap_config,
+	.field_txchanmap	= REG_FIELD(SUN4I_I2S_TX_CHAN_MAP_REG, 0, 31),
+	.field_rxchanmap	= REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31),
+	.field_txchansel	= REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2),
+	.field_rxchansel	= REG_FIELD(SUN4I_I2S_RX_CHAN_SEL_REG, 0, 2),
 };
 
+static int sun4i_i2s_init_regmap_fields(struct device *dev, struct sun4i_i2s *i2s)
+{
+	i2s->field_txchanmap =
+		devm_regmap_field_alloc(dev, i2s->regmap,
+					i2s->variant->field_txchanmap);
+	if (IS_ERR(i2s->field_txchanmap))
+		return PTR_ERR(i2s->field_txchanmap);
+
+	i2s->field_rxchanmap =
+		devm_regmap_field_alloc(dev, i2s->regmap,
+					i2s->variant->field_rxchanmap);
+	if (IS_ERR(i2s->field_rxchanmap))
+		return PTR_ERR(i2s->field_rxchanmap);
+
+	i2s->field_txchansel =
+		devm_regmap_field_alloc(dev, i2s->regmap,
+					i2s->variant->field_txchansel);
+	if (IS_ERR(i2s->field_txchansel))
+		return PTR_ERR(i2s->field_txchansel);
+
+	i2s->field_rxchansel =
+		devm_regmap_field_alloc(dev, i2s->regmap,
+					i2s->variant->field_rxchansel);
+	if (IS_ERR(i2s->field_rxchansel))
+		return PTR_ERR(i2s->field_rxchansel);
+
+	return 0;
+}
+
 static int sun4i_i2s_probe(struct platform_device *pdev)
 {
 	struct sun4i_i2s *i2s;
@@ -778,6 +836,12 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
 		goto err_suspend;
 	}
 
+	ret = sun4i_i2s_init_regmap_fields(&pdev->dev, i2s);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not initialise regmap fields\n");
+		goto err_suspend;
+	}
+
 	return 0;
 
 err_suspend:
-- 
2.13.3

[toc] | [prev] | [next] | [standalone]


#1699568 — Re: [alsa-devel] [PATCH v3 05/12] ASoC: sun4i-i2s: Add regmap fields for channels

Fromkbuild test robot <lkp@intel.com>
Date2017-07-30 18:50 +0200
SubjectRe: [alsa-devel] [PATCH v3 05/12] ASoC: sun4i-i2s: Add regmap fields for channels
Message-ID<u8ZzI-2LG-11@gated-at.bofh.it>
In reply to#1699327
Hi Marcus,

[auto build test WARNING on asoc/for-next]
[also build test WARNING on next-20170728]
[cannot apply to v4.13-rc2]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/codekipper-gmail-com/ASoC-Add-I2S-support-for-Allwinner-H3-SoCs/20170730-220649
base:   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next


coccinelle warnings: (new ones prefixed by >>)

>> sound/soc/sunxi/sun4i-i2s.c:740:1-3: WARNING: PTR_ERR_OR_ZERO can be used

Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[toc] | [prev] | [next] | [standalone]


#1699572 — [PATCH] ASoC: sun4i-i2s: fix ptr_ret.cocci warnings

Fromkbuild test robot <lkp@intel.com>
Date2017-07-30 18:50 +0200
Subject[PATCH] ASoC: sun4i-i2s: fix ptr_ret.cocci warnings
Message-ID<u8ZzI-2LG-15@gated-at.bofh.it>
In reply to#1699327
sound/soc/sunxi/sun4i-i2s.c:740:1-3: WARNING: PTR_ERR_OR_ZERO can be used


 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Fixes: 298207690de9 ("ASoC: sun4i-i2s: Add regmap fields for channels")
CC: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
---

 sun4i-i2s.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -737,10 +737,7 @@ static int sun4i_i2s_init_regmap_fields(
 	i2s->field_rxchansel =
 		devm_regmap_field_alloc(dev, i2s->regmap,
 					i2s->variant->field_rxchansel);
-	if (IS_ERR(i2s->field_rxchansel))
-		return PTR_ERR(i2s->field_rxchansel);
-
-	return 0;
+	return PTR_ERR_OR_ZERO(i2s->field_rxchansel);
 }
 
 static int sun4i_i2s_probe(struct platform_device *pdev)

[toc] | [prev] | [next] | [standalone]


#1699328 — [PATCH v3 03/12] ASoC: sun4i-i2s: Add regmap config to quirks

Fromcodekipper@gmail.com
Date2017-07-29 16:30 +0200
Subject[PATCH v3 03/12] ASoC: sun4i-i2s: Add regmap config to quirks
Message-ID<u8AUF-3uX-1@gated-at.bofh.it>
In reply to#1699326
From: Marcus Cooper <codekipper@gmail.com>

The newer SoCs have a larger range than the original SoC that this
driver was developed for. By adding the regmap config to the quirks
then the driver can initialise the managed register map correctly.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 1d538de4e4d0..73e991f5a81e 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -94,11 +94,13 @@
  * struct sun4i_i2s_quirks - Differences between SoC variants.
  *
  * @has_reset: SoC needs reset deasserted.
+ * @sun4i_i2s_regmap: regmap config to use.
  * @mclk_offset: Value by which mclkdiv needs to be adjusted.
  * @bclk_offset: Value by which bclkdiv needs to be adjusted.
  */
 struct sun4i_i2s_quirks {
 	bool				has_reset;
+	const struct regmap_config	*sun4i_i2s_regmap;
 	unsigned int			mclk_offset;
 	unsigned int			bclk_offset;
 };
@@ -670,11 +672,13 @@ static int sun4i_i2s_runtime_suspend(struct device *dev)
 }
 
 static const struct sun4i_i2s_quirks sun4i_a10_i2s_quirks = {
-	.has_reset	= false,
+	.has_reset		= false,
+	.sun4i_i2s_regmap	= &sun4i_i2s_regmap_config,
 };
 
 static const struct sun4i_i2s_quirks sun6i_a31_i2s_quirks = {
-	.has_reset	= true,
+	.has_reset		= true,
+	.sun4i_i2s_regmap	= &sun4i_i2s_regmap_config,
 };
 
 static int sun4i_i2s_probe(struct platform_device *pdev)
@@ -713,7 +717,7 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
 	}
 
 	i2s->regmap = devm_regmap_init_mmio(&pdev->dev, regs,
-					    &sun4i_i2s_regmap_config);
+					    i2s->variant->sun4i_i2s_regmap);
 	if (IS_ERR(i2s->regmap)) {
 		dev_err(&pdev->dev, "Regmap initialisation failed\n");
 		return PTR_ERR(i2s->regmap);
-- 
2.13.3

[toc] | [prev] | [next] | [standalone]


#1699329 — [PATCH v3 01/12] ASoC: sun4i-i2s: Extend quirks scope

Fromcodekipper@gmail.com
Date2017-07-29 16:30 +0200
Subject[PATCH v3 01/12] ASoC: sun4i-i2s: Extend quirks scope
Message-ID<u8AUG-3uX-11@gated-at.bofh.it>
In reply to#1699326
From: Marcus Cooper <codekipper@gmail.com>

In preparation for the changes required to support newer SoCs then
quirks has been moved and also added to the device structure.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 sound/soc/sunxi/sun4i-i2s.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 62b307b0c846..d7ee7a443e4e 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -90,6 +90,15 @@
 #define SUN4I_I2S_RX_CHAN_SEL_REG	0x38
 #define SUN4I_I2S_RX_CHAN_MAP_REG	0x3c
 
+/**
+ * struct sun4i_i2s_quirks - Differences between SoC variants.
+ *
+ * @has_reset: SoC needs reset deasserted.
+ */
+struct sun4i_i2s_quirks {
+	bool				has_reset;
+};
+
 struct sun4i_i2s {
 	struct clk	*bus_clk;
 	struct clk	*mod_clk;
@@ -100,6 +109,8 @@ struct sun4i_i2s {
 
 	struct snd_dmaengine_dai_dma_data	capture_dma_data;
 	struct snd_dmaengine_dai_dma_data	playback_dma_data;
+
+	const struct sun4i_i2s_quirks	*variant;
 };
 
 struct sun4i_i2s_clk_div {
@@ -654,10 +665,6 @@ static int sun4i_i2s_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-struct sun4i_i2s_quirks {
-	bool has_reset;
-};
-
 static const struct sun4i_i2s_quirks sun4i_a10_i2s_quirks = {
 	.has_reset	= false,
 };
@@ -669,7 +676,6 @@ static const struct sun4i_i2s_quirks sun6i_a31_i2s_quirks = {
 static int sun4i_i2s_probe(struct platform_device *pdev)
 {
 	struct sun4i_i2s *i2s;
-	const struct sun4i_i2s_quirks *quirks;
 	struct resource *res;
 	void __iomem *regs;
 	int irq, ret;
@@ -690,8 +696,8 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
 		return irq;
 	}
 
-	quirks = of_device_get_match_data(&pdev->dev);
-	if (!quirks) {
+	i2s->variant = of_device_get_match_data(&pdev->dev);
+	if (!i2s->variant) {
 		dev_err(&pdev->dev, "Failed to determine the quirks to use\n");
 		return -ENODEV;
 	}
@@ -715,7 +721,7 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
 		return PTR_ERR(i2s->mod_clk);
 	}
 
-	if (quirks->has_reset) {
+	if (i2s->variant->has_reset) {
 		i2s->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
 		if (IS_ERR(i2s->rst)) {
 			dev_err(&pdev->dev, "Failed to get reset control\n");
-- 
2.13.3

[toc] | [prev] | [next] | [standalone]


#1699750 — Re: [linux-sunxi] [PATCH v3 00/12] ASoC: Add I2S support for Allwinner H3 SoCs

FromOlliver Schinagl <oliver+list@schinagl.nl>
Date2017-07-31 09:10 +0200
SubjectRe: [linux-sunxi] [PATCH v3 00/12] ASoC: Add I2S support for Allwinner H3 SoCs
Message-ID<u9cZZ-3eT-11@gated-at.bofh.it>
In reply to#1699326
Hey Marcus,

On 29-07-17 16:17, codekipper@gmail.com wrote:
> From: Marcus Cooper <codekipper@gmail.com>
>
> Hi All,
> please find attached a series of patches to bring i2s support to the
> Allwinner H3 SoC. This has been tested with the following setups:
>
> A20 Olimex EVB connected to a pcm5102
But that's not an H3 is it? :)

> Orange Pi 2 connected to a uda1380
> Orange Pi 2 hdmi audio playback
> Pine 64 connected to the audio DAC board
>
> To get i2s working some additional patches are required which will be
> delivered later. For now they have been pushed here
>
> https://github.com/codekipper/linux-sunxi/commits/sunxi-audio-h3

Since I want to use i2s on the A20, i'm trying out your patches. It 
would be helpfull if you could point out which patches are missing (and 
if the subject doesn't cover it why those are needed)

>
> I don't own a A33 device which uses the i2s block for the audio codec
> so if someone could test against that it would be much appreciated.
>
> I'm also wondering if there is a preferred way of setting the lrclk
> size in the dts?..currently it is set to the sample width but for example
> the pcm5102a wants it to be 32 bits whatever the sample rate.
>
> Thanks in advance,
> CK
>
> ---
>
> v3 changes compared to v2 are:
> - initial changes to prepare driver for newer SoCs has been broken down
>   into smaller patches
> - reduce use of regmap fields to where just needed.
> - clkdiv expansion will be delivered later.
> - defines for H3 variant segregated.
> - fixed regmap config issue with SUN8I_I2S_FIFO_TX_REG.
>
>
> v2 changes compared to v1 are:
>  - massive refactoring to remove duplicate code making use of regmap_fields.
>  - extending the clock divisors.
>  - removed code that should be delivered when we support 20/24bits
>
> ---
>
> Marcus Cooper (12):
>   ASoC: sun4i-i2s: Extend quirks scope
>   ASoC: sun4i-i2s: Add clkdiv offsets to quirks
>   ASoC: sun4i-i2s: Add regmap config to quirks
>   ASoC: sun4i-i2s: Add TX FIFO offset to quirks
>   ASoC: sun4i-i2s: Add regmap fields for channels
>   ASoC: sun4i-i2s: Add changes for wss and sr
>   ASoC: sun4i-i2s: bclk and lrclk polarity tidyup
>   ASoC: sun4i-i2s: Add mclk enable regmap field
>   ASoC: sun4i-i2s: Add regmap field to set format
>   ASoC: sun4i-i2s: Check for slave select bit
>   ASoC: sun4i-i2s: Update global enable with bitmask
>   ASoC: sun4i-i2s: Add support for H3
>
>  .../devicetree/bindings/sound/sun4i-i2s.txt        |   2 +
>  sound/soc/sunxi/sun4i-i2s.c                        | 460 ++++++++++++++++++---
>  2 files changed, 398 insertions(+), 64 deletions(-)
>

[toc] | [prev] | [standalone]


Back to top | Article view | linux.kernel


csiph-web