Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1696476 > unrolled thread

[PATCH v3 00/16] Switchtec NTB Support

Back to article view | Back to linux.kernel

Contents

  [PATCH v3 00/16] Switchtec NTB Support Logan Gunthorpe <logang@deltatee.com> - 2017-07-25 23:10 +0200
    [PATCH v3 15/16] switchtec_ntb: add memory window support Logan Gunthorpe <logang@deltatee.com> - 2017-07-25 23:10 +0200
    [PATCH v3 11/16] switchtec_ntb: add skeleton NTB driver Logan Gunthorpe <logang@deltatee.com> - 2017-07-25 23:10 +0200
    [PATCH v3 04/16] switchtec: add link event notifier callback Logan Gunthorpe <logang@deltatee.com> - 2017-07-25 23:10 +0200
    [PATCH v3 01/16] switchtec: move structure definitions into a common header Logan Gunthorpe <logang@deltatee.com> - 2017-07-25 23:10 +0200
    [PATCH v3 08/16] switchtec_ntb: introduce initial NTB driver Logan Gunthorpe <logang@deltatee.com> - 2017-07-25 23:10 +0200
    [PATCH v3 06/16] ntb: ensure ntb_mw_get_align() is only called when the link is up Logan Gunthorpe <logang@deltatee.com> - 2017-07-25 23:10 +0200
    RE: [PATCH v3 00/16] Switchtec NTB Support "Allen Hubbe" <Allen.Hubbe@dell.com> - 2017-07-26 15:20 +0200

#1696476 — [PATCH v3 00/16] Switchtec NTB Support

Changes since v2:

- Reordered the ntb_test link patch per Allen
- Removed an extra call to switchtec_ntb_init_mw
- Fixed a typo in the switchtec.txt documentation.

--

Changes since v1:

- Rebased onto latest ntb-next branch (with v4.13-rc1)
- Reworked ntb_mw_count() function so that it can be called all the
  time (per discussion with Allen)
- Various spelling and formatting cleanups from Bjorn
- Added request_module() call such that the NTB module is automatically
  loaded when appropriate hardware exists.

--

Changes since the rfc:

- Rebased on ntb-next
- Switched ntb_part_op to use sleep instead of delay
- Dropped a number of useless dbg __func__ prints
- Went back to the dynamic instead of the static class
- Swapped the notifier block for a simple callback
- Modified the new ntb api so that a couple functions with pidx
  now must be called after link up. Per our discussion on the list.

--

This patchset implements Non-Transparent Bridge (NTB) support for the
Microsemi Switchtec series of switches. We're looking for some
review from the community at this point but hope to get it upstreamed
for v4.14.

Switchtec NTB support is configured over the same function and bar
as the management endpoint. Thus, the new driver hooks into the
management driver which we had merged in v4.12. We use the class
interface API to register an NTB device for every switchtec device
which supports NTB (not all do).

The Switchtec hardware supports doorbells, memory windows and messages.
Seeing there is no native scratchpad support, 128 spads are emulated
through the use of a pre-setup memory window. The switch has 64
doorbells which are shared between the two partitions and a
configurable set of memory windows. While the hardware supports more
than 2 partitions, this driver only supports the first two seeing
the current NTB API only supports two hosts.

The driver has been tested with ntb_netdev and fully passes the
ntb_test script.

This patchset is based off of ntb-next and can be found in this
git repo:

https://github.com/sbates130272/linux-p2pmem.git switchtec_ntb_v3

*** BLURB HERE ***

Logan Gunthorpe (16):
  switchtec: move structure definitions into a common header
  switchtec: export class symbol for use in upper layer driver
  switchtec: add NTB hardware register definitions
  switchtec: add link event notifier callback
  ntb: ntb_test: ensure the link is up before trying to configure the
    mws
  ntb: ensure ntb_mw_get_align() is only called when the link is up
  ntb: add check and comment for link up to mw_count() and
    mw_get_align()
  switchtec_ntb: introduce initial NTB driver
  switchtec_ntb: initialize hardware for memory windows
  switchtec_ntb: initialize hardware for doorbells and messages
  switchtec_ntb: add skeleton NTB driver
  switchtec_ntb: add link management
  switchtec_ntb: implement doorbell registers
  switchtec_ntb: implement scratchpad registers
  switchtec_ntb: add memory window support
  switchtec_ntb: update switchtec documentation with notes for NTB

 Documentation/switchtec.txt             |   12 +
 MAINTAINERS                             |    2 +
 drivers/ntb/hw/Kconfig                  |    1 +
 drivers/ntb/hw/Makefile                 |    1 +
 drivers/ntb/hw/mscc/Kconfig             |    9 +
 drivers/ntb/hw/mscc/Makefile            |    1 +
 drivers/ntb/hw/mscc/switchtec_ntb.c     | 1211 +++++++++++++++++++++++++++++++
 drivers/ntb/ntb_transport.c             |   20 +-
 drivers/ntb/test/ntb_perf.c             |   18 +-
 drivers/ntb/test/ntb_tool.c             |    6 +-
 drivers/pci/switch/switchtec.c          |  316 ++------
 include/linux/ntb.h                     |   11 +-
 include/linux/switchtec.h               |  373 ++++++++++
 tools/testing/selftests/ntb/ntb_test.sh |    4 +
 14 files changed, 1702 insertions(+), 283 deletions(-)
 create mode 100644 drivers/ntb/hw/mscc/Kconfig
 create mode 100644 drivers/ntb/hw/mscc/Makefile
 create mode 100644 drivers/ntb/hw/mscc/switchtec_ntb.c
 create mode 100644 include/linux/switchtec.h

--
2.11.0

[toc] | [next] | [standalone]

#1696478 — [PATCH v3 15/16] switchtec_ntb: add memory window support

The Switchtec hardware has two types of memory windows: LUTs and Direct.
The first area in each BAR is for LUT windows and the remaining area is
for the direct region. The total number of LUT entries is set by a
configuration setting in hardware and they all must be the same
size. (This is fixed by switchtec_ntb to be 64K.)

switchtec_ntb enables the LUTs only for the first BAR and enables the
highest power of two possible. Seeing the LUTs are at the beginning of
the BAR, the direct memory window's alignment is affected. Therefore,
the maximum direct memory window size can not be greater than the number
of LUTs times 64K. The direct window in other BARs will not have this
restriction as the LUTs will not be enabled there. LUTs will only be
exposed through the NTB API if the use_lut_mw parameter is set.

Seeing the Switchtec hardware, by default, configures BARs to be 4G a
module parameter is given to limit the size of the advertised memory
windows. Higher layers tend to allocate the maximum BAR size and this
has a tendency to fail when they try to allocate 4GB of contiguous
memory.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
---
 drivers/ntb/hw/mscc/switchtec_ntb.c | 213 +++++++++++++++++++++++++++++++++++-
 1 file changed, 210 insertions(+), 3 deletions(-)

diff --git a/drivers/ntb/hw/mscc/switchtec_ntb.c b/drivers/ntb/hw/mscc/switchtec_ntb.c
index ca403ad2f7ac..c96b723b5621 100644
--- a/drivers/ntb/hw/mscc/switchtec_ntb.c
+++ b/drivers/ntb/hw/mscc/switchtec_ntb.c
@@ -25,6 +25,11 @@ MODULE_VERSION("0.1");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Microsemi Corporation");
 
+static ulong max_mw_size = SZ_2M;
+module_param(max_mw_size, ulong, 0644);
+MODULE_PARM_DESC(max_mw_size,
+	"Max memory window size reported to the upper layer");
+
 static bool use_lut_mws;
 module_param(use_lut_mws, bool, 0644);
 MODULE_PARM_DESC(use_lut_mws,
@@ -190,7 +195,27 @@ static int switchtec_ntb_send_msg(struct switchtec_ntb *sndev, int idx,
 
 static int switchtec_ntb_mw_count(struct ntb_dev *ntb, int pidx)
 {
-	return 0;
+	struct switchtec_ntb *sndev = ntb_sndev(ntb);
+	int nr_direct_mw = sndev->peer_nr_direct_mw;
+	int nr_lut_mw = sndev->peer_nr_lut_mw - 1;
+
+	if (pidx != NTB_DEF_PEER_IDX)
+		return -EINVAL;
+
+	if (!use_lut_mws)
+		nr_lut_mw = 0;
+
+	return nr_direct_mw + nr_lut_mw;
+}
+
+static int lut_index(struct switchtec_ntb *sndev, int mw_idx)
+{
+	return mw_idx - sndev->nr_direct_mw + 1;
+}
+
+static int peer_lut_index(struct switchtec_ntb *sndev, int mw_idx)
+{
+	return mw_idx - sndev->peer_nr_direct_mw + 1;
 }
 
 static int switchtec_ntb_mw_get_align(struct ntb_dev *ntb, int pidx,
@@ -198,17 +223,192 @@ static int switchtec_ntb_mw_get_align(struct ntb_dev *ntb, int pidx,
 				      resource_size_t *size_align,
 				      resource_size_t *size_max)
 {
+	struct switchtec_ntb *sndev = ntb_sndev(ntb);
+	int lut;
+	resource_size_t size;
+
+	if (pidx != NTB_DEF_PEER_IDX)
+		return -EINVAL;
+
+	lut = widx >= sndev->peer_nr_direct_mw;
+	size = ioread64(&sndev->peer_shared->mw_sizes[widx]);
+
+	if (size == 0)
+		return -EINVAL;
+
+	if (addr_align)
+		*addr_align = lut ? size : SZ_4K;
+
+	if (size_align)
+		*size_align = lut ? size : SZ_4K;
+
+	if (size_max)
+		*size_max = size;
+
 	return 0;
 }
 
+static void switchtec_ntb_mw_clr_direct(struct switchtec_ntb *sndev, int idx)
+{
+	struct ntb_ctrl_regs __iomem *ctl = sndev->mmio_peer_ctrl;
+	int bar = sndev->peer_direct_mw_to_bar[idx];
+	u32 ctl_val;
+
+	ctl_val = ioread32(&ctl->bar_entry[bar].ctl);
+	ctl_val &= ~NTB_CTRL_BAR_DIR_WIN_EN;
+	iowrite32(ctl_val, &ctl->bar_entry[bar].ctl);
+	iowrite32(0, &ctl->bar_entry[bar].win_size);
+	iowrite64(sndev->self_partition, &ctl->bar_entry[bar].xlate_addr);
+}
+
+static void switchtec_ntb_mw_clr_lut(struct switchtec_ntb *sndev, int idx)
+{
+	struct ntb_ctrl_regs __iomem *ctl = sndev->mmio_peer_ctrl;
+
+	iowrite64(0, &ctl->lut_entry[peer_lut_index(sndev, idx)]);
+}
+
+static void switchtec_ntb_mw_set_direct(struct switchtec_ntb *sndev, int idx,
+					dma_addr_t addr, resource_size_t size)
+{
+	int xlate_pos = ilog2(size);
+	int bar = sndev->peer_direct_mw_to_bar[idx];
+	struct ntb_ctrl_regs __iomem *ctl = sndev->mmio_peer_ctrl;
+	u32 ctl_val;
+
+	ctl_val = ioread32(&ctl->bar_entry[bar].ctl);
+	ctl_val |= NTB_CTRL_BAR_DIR_WIN_EN;
+
+	iowrite32(ctl_val, &ctl->bar_entry[bar].ctl);
+	iowrite32(xlate_pos | size, &ctl->bar_entry[bar].win_size);
+	iowrite64(sndev->self_partition | addr,
+		  &ctl->bar_entry[bar].xlate_addr);
+}
+
+static void switchtec_ntb_mw_set_lut(struct switchtec_ntb *sndev, int idx,
+				     dma_addr_t addr, resource_size_t size)
+{
+	struct ntb_ctrl_regs __iomem *ctl = sndev->mmio_peer_ctrl;
+
+	iowrite64((NTB_CTRL_LUT_EN | (sndev->self_partition << 1) | addr),
+		  &ctl->lut_entry[peer_lut_index(sndev, idx)]);
+}
+
 static int switchtec_ntb_mw_set_trans(struct ntb_dev *ntb, int pidx, int widx,
 				      dma_addr_t addr, resource_size_t size)
 {
-	return 0;
+	struct switchtec_ntb *sndev = ntb_sndev(ntb);
+	struct ntb_ctrl_regs __iomem *ctl = sndev->mmio_peer_ctrl;
+	int xlate_pos = ilog2(size);
+	int nr_direct_mw = sndev->peer_nr_direct_mw;
+	int rc;
+
+	if (pidx != NTB_DEF_PEER_IDX)
+		return -EINVAL;
+
+	dev_dbg(&sndev->stdev->dev, "MW %d: part %d addr %pad size %pap",
+		widx, pidx, &addr, &size);
+
+	if (widx >= switchtec_ntb_mw_count(ntb, pidx))
+		return -EINVAL;
+
+	if (xlate_pos < 12)
+		return -EINVAL;
+
+	rc = switchtec_ntb_part_op(sndev, ctl, NTB_CTRL_PART_OP_LOCK,
+				   NTB_CTRL_PART_STATUS_LOCKED);
+	if (rc)
+		return rc;
+
+	if (addr == 0 || size == 0) {
+		if (widx < nr_direct_mw)
+			switchtec_ntb_mw_clr_direct(sndev, widx);
+		else
+			switchtec_ntb_mw_clr_lut(sndev, widx);
+	} else {
+		if (widx < nr_direct_mw)
+			switchtec_ntb_mw_set_direct(sndev, widx, addr, size);
+		else
+			switchtec_ntb_mw_set_lut(sndev, widx, addr, size);
+	}
+
+	rc = switchtec_ntb_part_op(sndev, ctl, NTB_CTRL_PART_OP_CFG,
+				   NTB_CTRL_PART_STATUS_NORMAL);
+
+	if (rc == -EIO) {
+		dev_err(&sndev->stdev->dev,
+			"Hardware reported an error configuring mw %d: %08x",
+			widx, ioread32(&ctl->bar_error));
+
+		if (widx < nr_direct_mw)
+			switchtec_ntb_mw_clr_direct(sndev, widx);
+		else
+			switchtec_ntb_mw_clr_lut(sndev, widx);
+
+		switchtec_ntb_part_op(sndev, ctl, NTB_CTRL_PART_OP_CFG,
+				      NTB_CTRL_PART_STATUS_NORMAL);
+	}
+
+	return rc;
 }
 
 static int switchtec_ntb_peer_mw_count(struct ntb_dev *ntb)
 {
+	struct switchtec_ntb *sndev = ntb_sndev(ntb);
+
+	return sndev->nr_direct_mw + (use_lut_mws ? sndev->nr_lut_mw - 1 : 0);
+}
+
+static int switchtec_ntb_direct_get_addr(struct switchtec_ntb *sndev,
+					 int idx, phys_addr_t *base,
+					 resource_size_t *size)
+{
+	int bar = sndev->direct_mw_to_bar[idx];
+	size_t offset = 0;
+
+	if (bar < 0)
+		return -EINVAL;
+
+	if (idx == 0) {
+		/*
+		 * This is the direct BAR shared with the LUTs
+		 * which means the actual window will be offset
+		 * by the size of all the LUT entries.
+		 */
+
+		offset = LUT_SIZE * sndev->nr_lut_mw;
+	}
+
+	if (base)
+		*base = pci_resource_start(sndev->ntb.pdev, bar) + offset;
+
+	if (size) {
+		*size = pci_resource_len(sndev->ntb.pdev, bar) - offset;
+		if (offset && *size > offset)
+			*size = offset;
+
+		if (*size > max_mw_size)
+			*size = max_mw_size;
+	}
+
+	return 0;
+}
+
+static int switchtec_ntb_lut_get_addr(struct switchtec_ntb *sndev,
+				      int idx, phys_addr_t *base,
+				      resource_size_t *size)
+{
+	int bar = sndev->direct_mw_to_bar[0];
+	int offset;
+
+	offset = LUT_SIZE * lut_index(sndev, idx);
+
+	if (base)
+		*base = pci_resource_start(sndev->ntb.pdev, bar) + offset;
+
+	if (size)
+		*size = LUT_SIZE;
+
 	return 0;
 }
 
@@ -216,7 +416,14 @@ static int switchtec_ntb_peer_mw_get_addr(struct ntb_dev *ntb, int idx,
 					  phys_addr_t *base,
 					  resource_size_t *size)
 {
-	return 0;
+	struct switchtec_ntb *sndev = ntb_sndev(ntb);
+
+	if (idx < sndev->nr_direct_mw)
+		return switchtec_ntb_direct_get_addr(sndev, idx, base, size);
+	else if (idx < switchtec_ntb_peer_mw_count(ntb))
+		return switchtec_ntb_lut_get_addr(sndev, idx, base, size);
+	else
+		return -EINVAL;
 }
 
 static void switchtec_ntb_part_link_speed(struct switchtec_ntb *sndev,
-- 
2.11.0

[toc] | [prev] | [next] | [standalone]

#1696480 — [PATCH v3 11/16] switchtec_ntb: add skeleton NTB driver

Add a skeleton NTB driver which will be filled out in subsequent patches.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
---
 drivers/ntb/hw/mscc/switchtec_ntb.c | 148 +++++++++++++++++++++++++++++++++++-
 include/linux/ntb.h                 |   3 +
 2 files changed, 150 insertions(+), 1 deletion(-)

diff --git a/drivers/ntb/hw/mscc/switchtec_ntb.c b/drivers/ntb/hw/mscc/switchtec_ntb.c
index 877337902363..f87c0eef59ef 100644
--- a/drivers/ntb/hw/mscc/switchtec_ntb.c
+++ b/drivers/ntb/hw/mscc/switchtec_ntb.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/kthread.h>
 #include <linux/interrupt.h>
+#include <linux/ntb.h>
 
 MODULE_DESCRIPTION("Microsemi Switchtec(tm) NTB Driver");
 MODULE_VERSION("0.1");
@@ -71,6 +72,7 @@ struct shared_mw {
 #define LUT_SIZE SZ_64K
 
 struct switchtec_ntb {
+	struct ntb_dev ntb;
 	struct switchtec_dev *stdev;
 
 	int self_partition;
@@ -161,10 +163,148 @@ static int switchtec_ntb_part_op(struct switchtec_ntb *sndev,
 	return -EIO;
 }
 
+static int switchtec_ntb_mw_count(struct ntb_dev *ntb, int pidx)
+{
+	return 0;
+}
+
+static int switchtec_ntb_mw_get_align(struct ntb_dev *ntb, int pidx,
+				      int widx, resource_size_t *addr_align,
+				      resource_size_t *size_align,
+				      resource_size_t *size_max)
+{
+	return 0;
+}
+
+static int switchtec_ntb_mw_set_trans(struct ntb_dev *ntb, int pidx, int widx,
+				      dma_addr_t addr, resource_size_t size)
+{
+	return 0;
+}
+
+static int switchtec_ntb_peer_mw_count(struct ntb_dev *ntb)
+{
+	return 0;
+}
+
+static int switchtec_ntb_peer_mw_get_addr(struct ntb_dev *ntb, int idx,
+					  phys_addr_t *base,
+					  resource_size_t *size)
+{
+	return 0;
+}
+
+static u64 switchtec_ntb_link_is_up(struct ntb_dev *ntb,
+				    enum ntb_speed *speed,
+				    enum ntb_width *width)
+{
+	return 0;
+}
+
+static int switchtec_ntb_link_enable(struct ntb_dev *ntb,
+				     enum ntb_speed max_speed,
+				     enum ntb_width max_width)
+{
+	return 0;
+}
+
+static int switchtec_ntb_link_disable(struct ntb_dev *ntb)
+{
+	return 0;
+}
+
+static u64 switchtec_ntb_db_valid_mask(struct ntb_dev *ntb)
+{
+	return 0;
+}
+
+static int switchtec_ntb_db_vector_count(struct ntb_dev *ntb)
+{
+	return 0;
+}
+
+static u64 switchtec_ntb_db_vector_mask(struct ntb_dev *ntb, int db_vector)
+{
+	return 0;
+}
+
+static u64 switchtec_ntb_db_read(struct ntb_dev *ntb)
+{
+	return 0;
+}
+
+static int switchtec_ntb_db_clear(struct ntb_dev *ntb, u64 db_bits)
+{
+	return 0;
+}
+
+static int switchtec_ntb_db_set_mask(struct ntb_dev *ntb, u64 db_bits)
+{
+	return 0;
+}
+
+static int switchtec_ntb_db_clear_mask(struct ntb_dev *ntb, u64 db_bits)
+{
+	return 0;
+}
+
+static int switchtec_ntb_peer_db_set(struct ntb_dev *ntb, u64 db_bits)
+{
+	return 0;
+}
+
+static int switchtec_ntb_spad_count(struct ntb_dev *ntb)
+{
+	return 0;
+}
+
+static u32 switchtec_ntb_spad_read(struct ntb_dev *ntb, int idx)
+{
+	return 0;
+}
+
+static int switchtec_ntb_spad_write(struct ntb_dev *ntb, int idx, u32 val)
+{
+	return 0;
+}
+
+static int switchtec_ntb_peer_spad_write(struct ntb_dev *ntb, int pidx,
+					 int sidx, u32 val)
+{
+	return 0;
+}
+
+static const struct ntb_dev_ops switchtec_ntb_ops = {
+	.mw_count		= switchtec_ntb_mw_count,
+	.mw_get_align		= switchtec_ntb_mw_get_align,
+	.mw_set_trans		= switchtec_ntb_mw_set_trans,
+	.peer_mw_count		= switchtec_ntb_peer_mw_count,
+	.peer_mw_get_addr	= switchtec_ntb_peer_mw_get_addr,
+	.link_is_up		= switchtec_ntb_link_is_up,
+	.link_enable		= switchtec_ntb_link_enable,
+	.link_disable		= switchtec_ntb_link_disable,
+	.db_valid_mask		= switchtec_ntb_db_valid_mask,
+	.db_vector_count	= switchtec_ntb_db_vector_count,
+	.db_vector_mask		= switchtec_ntb_db_vector_mask,
+	.db_read		= switchtec_ntb_db_read,
+	.db_clear		= switchtec_ntb_db_clear,
+	.db_set_mask		= switchtec_ntb_db_set_mask,
+	.db_clear_mask		= switchtec_ntb_db_clear_mask,
+	.peer_db_set		= switchtec_ntb_peer_db_set,
+	.spad_count		= switchtec_ntb_spad_count,
+	.spad_read		= switchtec_ntb_spad_read,
+	.spad_write		= switchtec_ntb_spad_write,
+	.peer_spad_write	= switchtec_ntb_peer_spad_write,
+};
+
 static void switchtec_ntb_init_sndev(struct switchtec_ntb *sndev)
 {
 	u64 part_map;
 
+	sndev->ntb.pdev = sndev->stdev->pdev;
+	sndev->ntb.topo = NTB_TOPO_SWITCH;
+	sndev->ntb.ops = &switchtec_ntb_ops;
+
 	sndev->self_partition = sndev->stdev->partition;
 
 	sndev->mmio_ntb = sndev->stdev->mmio_ntb;
@@ -512,7 +652,6 @@ static int switchtec_ntb_add(struct device *dev,
 		return -ENOMEM;
 
 	sndev->stdev = stdev;
-
 	switchtec_ntb_init_sndev(sndev);
 	switchtec_ntb_init_mw(sndev);
 	switchtec_ntb_init_db(sndev);
@@ -530,11 +669,17 @@ static int switchtec_ntb_add(struct device *dev,
 	if (rc)
 		goto deinit_shared_and_exit;
 
+	rc = ntb_register_device(&sndev->ntb);
+	if (rc)
+		goto deinit_and_exit;
+
 	stdev->sndev = sndev;
 	dev_info(dev, "NTB device registered");
 
 	return 0;
 
+deinit_and_exit:
+	switchtec_ntb_deinit_db_msg_irq(sndev);
 deinit_shared_and_exit:
 	switchtec_ntb_deinit_shared_mw(sndev);
 free_and_exit:
@@ -553,6 +698,7 @@ void switchtec_ntb_remove(struct device *dev,
 		return;
 
 	stdev->sndev = NULL;
+	ntb_unregister_device(&sndev->ntb);
 	switchtec_ntb_deinit_db_msg_irq(sndev);
 	switchtec_ntb_deinit_shared_mw(sndev);
 	kfree(sndev);
diff --git a/include/linux/ntb.h b/include/linux/ntb.h
index 47f2966cfd7f..c308964777eb 100644
--- a/include/linux/ntb.h
+++ b/include/linux/ntb.h
@@ -70,6 +70,7 @@ struct pci_dev;
  * @NTB_TOPO_SEC:	On secondary side of remote ntb.
  * @NTB_TOPO_B2B_USD:	On primary side of local ntb upstream of remote ntb.
  * @NTB_TOPO_B2B_DSD:	On primary side of local ntb downstream of remote ntb.
+ * @NTB_TOPO_SWITCH:	Connected via a switch which supports ntb.
  */
 enum ntb_topo {
 	NTB_TOPO_NONE = -1,
@@ -77,6 +78,7 @@ enum ntb_topo {
 	NTB_TOPO_SEC,
 	NTB_TOPO_B2B_USD,
 	NTB_TOPO_B2B_DSD,
+	NTB_TOPO_SWITCH,
 };
 
 static inline int ntb_topo_is_b2b(enum ntb_topo topo)
@@ -97,6 +99,7 @@ static inline char *ntb_topo_string(enum ntb_topo topo)
 	case NTB_TOPO_SEC:	return "NTB_TOPO_SEC";
 	case NTB_TOPO_B2B_USD:	return "NTB_TOPO_B2B_USD";
 	case NTB_TOPO_B2B_DSD:	return "NTB_TOPO_B2B_DSD";
+	case NTB_TOPO_SWITCH:	return "NTB_TOPO_SWITCH";
 	}
 	return "NTB_TOPO_INVALID";
 }
-- 
2.11.0

[toc] | [prev] | [next] | [standalone]

#1696481 — [PATCH v3 04/16] switchtec: add link event notifier callback

In order for the Switchtec NTB code to handle link change events we
create a notifier callback in the switchtec code which gets called
whenever an appropriate event interrupt occurs.

In order to preserve userspace's ability to follow these events,
we compare the event count with a stored copy from last time we
checked.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/pci/switch/switchtec.c | 51 ++++++++++++++++++++++++++++++++++++++++++
 include/linux/switchtec.h      |  4 ++++
 2 files changed, 55 insertions(+)

diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index 39c9218d733f..807569e62bee 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -978,6 +978,49 @@ static const struct file_operations switchtec_fops = {
 	.compat_ioctl = switchtec_dev_ioctl,
 };
 
+static void link_event_work(struct work_struct *work)
+{
+	struct switchtec_dev *stdev;
+
+	stdev = container_of(work, struct switchtec_dev, link_event_work);
+
+	if (stdev->link_notifier)
+		stdev->link_notifier(stdev);
+}
+
+static void check_link_state_events(struct switchtec_dev *stdev)
+{
+	int idx;
+	u32 reg;
+	int count;
+	int occurred = 0;
+
+	for (idx = 0; idx < stdev->pff_csr_count; idx++) {
+		reg = ioread32(&stdev->mmio_pff_csr[idx].link_state_hdr);
+		dev_dbg(&stdev->dev, "link_state: %d->%08x\n", idx, reg);
+		count = (reg >> 5) & 0xFF;
+
+		if (count != stdev->link_event_count[idx]) {
+			occurred = 1;
+			stdev->link_event_count[idx] = count;
+		}
+	}
+
+	if (occurred)
+		schedule_work(&stdev->link_event_work);
+}
+
+static void enable_link_state_events(struct switchtec_dev *stdev)
+{
+	int idx;
+
+	for (idx = 0; idx < stdev->pff_csr_count; idx++) {
+		iowrite32(SWITCHTEC_EVENT_CLEAR |
+			  SWITCHTEC_EVENT_EN_IRQ,
+			  &stdev->mmio_pff_csr[idx].link_state_hdr);
+	}
+}
+
 static void stdev_release(struct device *dev)
 {
 	struct switchtec_dev *stdev = to_stdev(dev);
@@ -1030,6 +1073,7 @@ static struct switchtec_dev *stdev_create(struct pci_dev *pdev)
 	stdev->mrpc_busy = 0;
 	INIT_WORK(&stdev->mrpc_work, mrpc_event_work);
 	INIT_DELAYED_WORK(&stdev->mrpc_timeout, mrpc_timeout_work);
+	INIT_WORK(&stdev->link_event_work, link_event_work);
 	init_waitqueue_head(&stdev->event_wq);
 	atomic_set(&stdev->event_cnt, 0);
 
@@ -1073,6 +1117,9 @@ static int mask_event(struct switchtec_dev *stdev, int eid, int idx)
 	if (!(hdr & SWITCHTEC_EVENT_OCCURRED && hdr & SWITCHTEC_EVENT_EN_IRQ))
 		return 0;
 
+	if (eid == SWITCHTEC_IOCTL_EVENT_LINK_STATE)
+		return 0;
+
 	dev_dbg(&stdev->dev, "%s: %d %d %x\n", __func__, eid, idx, hdr);
 	hdr &= ~(SWITCHTEC_EVENT_EN_IRQ | SWITCHTEC_EVENT_OCCURRED);
 	iowrite32(hdr, hdr_reg);
@@ -1092,6 +1139,7 @@ static int mask_all_events(struct switchtec_dev *stdev, int eid)
 		for (idx = 0; idx < stdev->pff_csr_count; idx++) {
 			if (!stdev->pff_local[idx])
 				continue;
+
 			count += mask_event(stdev, eid, idx);
 		}
 	} else {
@@ -1116,6 +1164,8 @@ static irqreturn_t switchtec_event_isr(int irq, void *dev)
 		iowrite32(reg, &stdev->mmio_part_cfg->mrpc_comp_hdr);
 	}
 
+	check_link_state_events(stdev);
+
 	for (eid = 0; eid < SWITCHTEC_IOCTL_MAX_EVENTS; eid++)
 		event_count += mask_all_events(stdev, eid);
 
@@ -1242,6 +1292,7 @@ static int switchtec_pci_probe(struct pci_dev *pdev,
 	iowrite32(SWITCHTEC_EVENT_CLEAR |
 		  SWITCHTEC_EVENT_EN_IRQ,
 		  &stdev->mmio_part_cfg->mrpc_comp_hdr);
+	enable_link_state_events(stdev);
 
 	rc = cdev_device_add(&stdev->cdev, &stdev->dev);
 	if (rc)
diff --git a/include/linux/switchtec.h b/include/linux/switchtec.h
index 9c2be7631257..d8159944f013 100644
--- a/include/linux/switchtec.h
+++ b/include/linux/switchtec.h
@@ -353,6 +353,10 @@ struct switchtec_dev {
 
 	wait_queue_head_t event_wq;
 	atomic_t event_cnt;
+
+	struct work_struct link_event_work;
+	void (*link_notifier)(struct switchtec_dev *stdev);
+	u8 link_event_count[SWITCHTEC_MAX_PFF_CSR];
 };
 
 static inline struct switchtec_dev *to_stdev(struct device *dev)
-- 
2.11.0

[toc] | [prev] | [next] | [standalone]

#1696484 — [PATCH v3 01/16] switchtec: move structure definitions into a common header

Create the switchtec.h header in include/linux with hardware defines
and the switchtec_dev structure. Both moved directly from switchtec.c.
This is a prep patch for creating an NTB driver for Switchtec.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
 MAINTAINERS                    |   1 +
 drivers/pci/switch/switchtec.c | 260 +-------------------------------------
 include/linux/switchtec.h      | 279 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 281 insertions(+), 259 deletions(-)
 create mode 100644 include/linux/switchtec.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 205d3977ac46..4ff2ad7c1c7b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10146,6 +10146,7 @@ F:	Documentation/switchtec.txt
 F:	Documentation/ABI/testing/sysfs-class-switchtec
 F:	drivers/pci/switch/switchtec*
 F:	include/uapi/linux/switchtec_ioctl.h
+F:	include/linux/switchtec.h
 
 PCI DRIVER FOR NVIDIA TEGRA
 M:	Thierry Reding <thierry.reding@gmail.com>
diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index af81b2dec42e..5b75d3008ff8 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -13,6 +13,7 @@
  *
  */
 
+#include <linux/switchtec.h>
 #include <linux/switchtec_ioctl.h>
 
 #include <linux/interrupt.h>
@@ -20,8 +21,6 @@
 #include <linux/fs.h>
 #include <linux/uaccess.h>
 #include <linux/poll.h>
-#include <linux/pci.h>
-#include <linux/cdev.h>
 #include <linux/wait.h>
 
 MODULE_DESCRIPTION("Microsemi Switchtec(tm) PCIe Management Driver");
@@ -37,263 +36,6 @@ static dev_t switchtec_devt;
 static struct class *switchtec_class;
 static DEFINE_IDA(switchtec_minor_ida);
 
-#define MICROSEMI_VENDOR_ID         0x11f8
-#define MICROSEMI_NTB_CLASSCODE     0x068000
-#define MICROSEMI_MGMT_CLASSCODE    0x058000
-
-#define SWITCHTEC_MRPC_PAYLOAD_SIZE 1024
-#define SWITCHTEC_MAX_PFF_CSR 48
-
-#define SWITCHTEC_EVENT_OCCURRED BIT(0)
-#define SWITCHTEC_EVENT_CLEAR    BIT(0)
-#define SWITCHTEC_EVENT_EN_LOG   BIT(1)
-#define SWITCHTEC_EVENT_EN_CLI   BIT(2)
-#define SWITCHTEC_EVENT_EN_IRQ   BIT(3)
-#define SWITCHTEC_EVENT_FATAL    BIT(4)
-
-enum {
-	SWITCHTEC_GAS_MRPC_OFFSET       = 0x0000,
-	SWITCHTEC_GAS_TOP_CFG_OFFSET    = 0x1000,
-	SWITCHTEC_GAS_SW_EVENT_OFFSET   = 0x1800,
-	SWITCHTEC_GAS_SYS_INFO_OFFSET   = 0x2000,
-	SWITCHTEC_GAS_FLASH_INFO_OFFSET = 0x2200,
-	SWITCHTEC_GAS_PART_CFG_OFFSET   = 0x4000,
-	SWITCHTEC_GAS_NTB_OFFSET        = 0x10000,
-	SWITCHTEC_GAS_PFF_CSR_OFFSET    = 0x134000,
-};
-
-struct mrpc_regs {
-	u8 input_data[SWITCHTEC_MRPC_PAYLOAD_SIZE];
-	u8 output_data[SWITCHTEC_MRPC_PAYLOAD_SIZE];
-	u32 cmd;
-	u32 status;
-	u32 ret_value;
-} __packed;
-
-enum mrpc_status {
-	SWITCHTEC_MRPC_STATUS_INPROGRESS = 1,
-	SWITCHTEC_MRPC_STATUS_DONE = 2,
-	SWITCHTEC_MRPC_STATUS_ERROR = 0xFF,
-	SWITCHTEC_MRPC_STATUS_INTERRUPTED = 0x100,
-};
-
-struct sw_event_regs {
-	u64 event_report_ctrl;
-	u64 reserved1;
-	u64 part_event_bitmap;
-	u64 reserved2;
-	u32 global_summary;
-	u32 reserved3[3];
-	u32 stack_error_event_hdr;
-	u32 stack_error_event_data;
-	u32 reserved4[4];
-	u32 ppu_error_event_hdr;
-	u32 ppu_error_event_data;
-	u32 reserved5[4];
-	u32 isp_error_event_hdr;
-	u32 isp_error_event_data;
-	u32 reserved6[4];
-	u32 sys_reset_event_hdr;
-	u32 reserved7[5];
-	u32 fw_exception_hdr;
-	u32 reserved8[5];
-	u32 fw_nmi_hdr;
-	u32 reserved9[5];
-	u32 fw_non_fatal_hdr;
-	u32 reserved10[5];
-	u32 fw_fatal_hdr;
-	u32 reserved11[5];
-	u32 twi_mrpc_comp_hdr;
-	u32 twi_mrpc_comp_data;
-	u32 reserved12[4];
-	u32 twi_mrpc_comp_async_hdr;
-	u32 twi_mrpc_comp_async_data;
-	u32 reserved13[4];
-	u32 cli_mrpc_comp_hdr;
-	u32 cli_mrpc_comp_data;
-	u32 reserved14[4];
-	u32 cli_mrpc_comp_async_hdr;
-	u32 cli_mrpc_comp_async_data;
-	u32 reserved15[4];
-	u32 gpio_interrupt_hdr;
-	u32 gpio_interrupt_data;
-	u32 reserved16[4];
-} __packed;
-
-enum {
-	SWITCHTEC_CFG0_RUNNING = 0x04,
-	SWITCHTEC_CFG1_RUNNING = 0x05,
-	SWITCHTEC_IMG0_RUNNING = 0x03,
-	SWITCHTEC_IMG1_RUNNING = 0x07,
-};
-
-struct sys_info_regs {
-	u32 device_id;
-	u32 device_version;
-	u32 firmware_version;
-	u32 reserved1;
-	u32 vendor_table_revision;
-	u32 table_format_version;
-	u32 partition_id;
-	u32 cfg_file_fmt_version;
-	u16 cfg_running;
-	u16 img_running;
-	u32 reserved2[57];
-	char vendor_id[8];
-	char product_id[16];
-	char product_revision[4];
-	char component_vendor[8];
-	u16 component_id;
-	u8 component_revision;
-} __packed;
-
-struct flash_info_regs {
-	u32 flash_part_map_upd_idx;
-
-	struct active_partition_info {
-		u32 address;
-		u32 build_version;
-		u32 build_string;
-	} active_img;
-
-	struct active_partition_info active_cfg;
-	struct active_partition_info inactive_img;
-	struct active_partition_info inactive_cfg;
-
-	u32 flash_length;
-
-	struct partition_info {
-		u32 address;
-		u32 length;
-	} cfg0;
-
-	struct partition_info cfg1;
-	struct partition_info img0;
-	struct partition_info img1;
-	struct partition_info nvlog;
-	struct partition_info vendor[8];
-};
-
-struct ntb_info_regs {
-	u8  partition_count;
-	u8  partition_id;
-	u16 reserved1;
-	u64 ep_map;
-	u16 requester_id;
-} __packed;
-
-struct part_cfg_regs {
-	u32 status;
-	u32 state;
-	u32 port_cnt;
-	u32 usp_port_mode;
-	u32 usp_pff_inst_id;
-	u32 vep_pff_inst_id;
-	u32 dsp_pff_inst_id[47];
-	u32 reserved1[11];
-	u16 vep_vector_number;
-	u16 usp_vector_number;
-	u32 port_event_bitmap;
-	u32 reserved2[3];
-	u32 part_event_summary;
-	u32 reserved3[3];
-	u32 part_reset_hdr;
-	u32 part_reset_data[5];
-	u32 mrpc_comp_hdr;
-	u32 mrpc_comp_data[5];
-	u32 mrpc_comp_async_hdr;
-	u32 mrpc_comp_async_data[5];
-	u32 dyn_binding_hdr;
-	u32 dyn_binding_data[5];
-	u32 reserved4[159];
-} __packed;
-
-enum {
-	SWITCHTEC_PART_CFG_EVENT_RESET = 1 << 0,
-	SWITCHTEC_PART_CFG_EVENT_MRPC_CMP = 1 << 1,
-	SWITCHTEC_PART_CFG_EVENT_MRPC_ASYNC_CMP = 1 << 2,
-	SWITCHTEC_PART_CFG_EVENT_DYN_PART_CMP = 1 << 3,
-};
-
-struct pff_csr_regs {
-	u16 vendor_id;
-	u16 device_id;
-	u32 pci_cfg_header[15];
-	u32 pci_cap_region[48];
-	u32 pcie_cap_region[448];
-	u32 indirect_gas_window[128];
-	u32 indirect_gas_window_off;
-	u32 reserved[127];
-	u32 pff_event_summary;
-	u32 reserved2[3];
-	u32 aer_in_p2p_hdr;
-	u32 aer_in_p2p_data[5];
-	u32 aer_in_vep_hdr;
-	u32 aer_in_vep_data[5];
-	u32 dpc_hdr;
-	u32 dpc_data[5];
-	u32 cts_hdr;
-	u32 cts_data[5];
-	u32 reserved3[6];
-	u32 hotplug_hdr;
-	u32 hotplug_data[5];
-	u32 ier_hdr;
-	u32 ier_data[5];
-	u32 threshold_hdr;
-	u32 threshold_data[5];
-	u32 power_mgmt_hdr;
-	u32 power_mgmt_data[5];
-	u32 tlp_throttling_hdr;
-	u32 tlp_throttling_data[5];
-	u32 force_speed_hdr;
-	u32 force_speed_data[5];
-	u32 credit_timeout_hdr;
-	u32 credit_timeout_data[5];
-	u32 link_state_hdr;
-	u32 link_state_data[5];
-	u32 reserved4[174];
-} __packed;
-
-struct switchtec_dev {
-	struct pci_dev *pdev;
-	struct device dev;
-	struct cdev cdev;
-
-	int partition;
-	int partition_count;
-	int pff_csr_count;
-	char pff_local[SWITCHTEC_MAX_PFF_CSR];
-
-	void __iomem *mmio;
-	struct mrpc_regs __iomem *mmio_mrpc;
-	struct sw_event_regs __iomem *mmio_sw_event;
-	struct sys_info_regs __iomem *mmio_sys_info;
-	struct flash_info_regs __iomem *mmio_flash_info;
-	struct ntb_info_regs __iomem *mmio_ntb;
-	struct part_cfg_regs __iomem *mmio_part_cfg;
-	struct part_cfg_regs __iomem *mmio_part_cfg_all;
-	struct pff_csr_regs __iomem *mmio_pff_csr;
-
-	/*
-	 * The mrpc mutex must be held when accessing the other
-	 * mrpc_ fields, alive flag and stuser->state field
-	 */
-	struct mutex mrpc_mutex;
-	struct list_head mrpc_queue;
-	int mrpc_busy;
-	struct work_struct mrpc_work;
-	struct delayed_work mrpc_timeout;
-	bool alive;
-
-	wait_queue_head_t event_wq;
-	atomic_t event_cnt;
-};
-
-static struct switchtec_dev *to_stdev(struct device *dev)
-{
-	return container_of(dev, struct switchtec_dev, dev);
-}
-
 enum mrpc_state {
 	MRPC_IDLE = 0,
 	MRPC_QUEUED,
diff --git a/include/linux/switchtec.h b/include/linux/switchtec.h
new file mode 100644
index 000000000000..1cbd0e63b0ab
--- /dev/null
+++ b/include/linux/switchtec.h
@@ -0,0 +1,279 @@
+/*
+ * Microsemi Switchtec PCIe Driver
+ * Copyright (c) 2017, Microsemi Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef _SWITCHTEC_H
+#define _SWITCHTEC_H
+
+#include <linux/pci.h>
+#include <linux/cdev.h>
+
+#define MICROSEMI_VENDOR_ID         0x11f8
+#define MICROSEMI_NTB_CLASSCODE     0x068000
+#define MICROSEMI_MGMT_CLASSCODE    0x058000
+
+#define SWITCHTEC_MRPC_PAYLOAD_SIZE 1024
+#define SWITCHTEC_MAX_PFF_CSR 48
+
+#define SWITCHTEC_EVENT_OCCURRED BIT(0)
+#define SWITCHTEC_EVENT_CLEAR    BIT(0)
+#define SWITCHTEC_EVENT_EN_LOG   BIT(1)
+#define SWITCHTEC_EVENT_EN_CLI   BIT(2)
+#define SWITCHTEC_EVENT_EN_IRQ   BIT(3)
+#define SWITCHTEC_EVENT_FATAL    BIT(4)
+
+enum {
+	SWITCHTEC_GAS_MRPC_OFFSET       = 0x0000,
+	SWITCHTEC_GAS_TOP_CFG_OFFSET    = 0x1000,
+	SWITCHTEC_GAS_SW_EVENT_OFFSET   = 0x1800,
+	SWITCHTEC_GAS_SYS_INFO_OFFSET   = 0x2000,
+	SWITCHTEC_GAS_FLASH_INFO_OFFSET = 0x2200,
+	SWITCHTEC_GAS_PART_CFG_OFFSET   = 0x4000,
+	SWITCHTEC_GAS_NTB_OFFSET        = 0x10000,
+	SWITCHTEC_GAS_PFF_CSR_OFFSET    = 0x134000,
+};
+
+struct mrpc_regs {
+	u8 input_data[SWITCHTEC_MRPC_PAYLOAD_SIZE];
+	u8 output_data[SWITCHTEC_MRPC_PAYLOAD_SIZE];
+	u32 cmd;
+	u32 status;
+	u32 ret_value;
+} __packed;
+
+enum mrpc_status {
+	SWITCHTEC_MRPC_STATUS_INPROGRESS = 1,
+	SWITCHTEC_MRPC_STATUS_DONE = 2,
+	SWITCHTEC_MRPC_STATUS_ERROR = 0xFF,
+	SWITCHTEC_MRPC_STATUS_INTERRUPTED = 0x100,
+};
+
+struct sw_event_regs {
+	u64 event_report_ctrl;
+	u64 reserved1;
+	u64 part_event_bitmap;
+	u64 reserved2;
+	u32 global_summary;
+	u32 reserved3[3];
+	u32 stack_error_event_hdr;
+	u32 stack_error_event_data;
+	u32 reserved4[4];
+	u32 ppu_error_event_hdr;
+	u32 ppu_error_event_data;
+	u32 reserved5[4];
+	u32 isp_error_event_hdr;
+	u32 isp_error_event_data;
+	u32 reserved6[4];
+	u32 sys_reset_event_hdr;
+	u32 reserved7[5];
+	u32 fw_exception_hdr;
+	u32 reserved8[5];
+	u32 fw_nmi_hdr;
+	u32 reserved9[5];
+	u32 fw_non_fatal_hdr;
+	u32 reserved10[5];
+	u32 fw_fatal_hdr;
+	u32 reserved11[5];
+	u32 twi_mrpc_comp_hdr;
+	u32 twi_mrpc_comp_data;
+	u32 reserved12[4];
+	u32 twi_mrpc_comp_async_hdr;
+	u32 twi_mrpc_comp_async_data;
+	u32 reserved13[4];
+	u32 cli_mrpc_comp_hdr;
+	u32 cli_mrpc_comp_data;
+	u32 reserved14[4];
+	u32 cli_mrpc_comp_async_hdr;
+	u32 cli_mrpc_comp_async_data;
+	u32 reserved15[4];
+	u32 gpio_interrupt_hdr;
+	u32 gpio_interrupt_data;
+	u32 reserved16[4];
+} __packed;
+
+enum {
+	SWITCHTEC_CFG0_RUNNING = 0x04,
+	SWITCHTEC_CFG1_RUNNING = 0x05,
+	SWITCHTEC_IMG0_RUNNING = 0x03,
+	SWITCHTEC_IMG1_RUNNING = 0x07,
+};
+
+struct sys_info_regs {
+	u32 device_id;
+	u32 device_version;
+	u32 firmware_version;
+	u32 reserved1;
+	u32 vendor_table_revision;
+	u32 table_format_version;
+	u32 partition_id;
+	u32 cfg_file_fmt_version;
+	u16 cfg_running;
+	u16 img_running;
+	u32 reserved2[57];
+	char vendor_id[8];
+	char product_id[16];
+	char product_revision[4];
+	char component_vendor[8];
+	u16 component_id;
+	u8 component_revision;
+} __packed;
+
+struct flash_info_regs {
+	u32 flash_part_map_upd_idx;
+
+	struct active_partition_info {
+		u32 address;
+		u32 build_version;
+		u32 build_string;
+	} active_img;
+
+	struct active_partition_info active_cfg;
+	struct active_partition_info inactive_img;
+	struct active_partition_info inactive_cfg;
+
+	u32 flash_length;
+
+	struct partition_info {
+		u32 address;
+		u32 length;
+	} cfg0;
+
+	struct partition_info cfg1;
+	struct partition_info img0;
+	struct partition_info img1;
+	struct partition_info nvlog;
+	struct partition_info vendor[8];
+};
+
+struct ntb_info_regs {
+	u8  partition_count;
+	u8  partition_id;
+	u16 reserved1;
+	u64 ep_map;
+	u16 requester_id;
+} __packed;
+
+struct part_cfg_regs {
+	u32 status;
+	u32 state;
+	u32 port_cnt;
+	u32 usp_port_mode;
+	u32 usp_pff_inst_id;
+	u32 vep_pff_inst_id;
+	u32 dsp_pff_inst_id[47];
+	u32 reserved1[11];
+	u16 vep_vector_number;
+	u16 usp_vector_number;
+	u32 port_event_bitmap;
+	u32 reserved2[3];
+	u32 part_event_summary;
+	u32 reserved3[3];
+	u32 part_reset_hdr;
+	u32 part_reset_data[5];
+	u32 mrpc_comp_hdr;
+	u32 mrpc_comp_data[5];
+	u32 mrpc_comp_async_hdr;
+	u32 mrpc_comp_async_data[5];
+	u32 dyn_binding_hdr;
+	u32 dyn_binding_data[5];
+	u32 reserved4[159];
+} __packed;
+
+enum {
+	SWITCHTEC_PART_CFG_EVENT_RESET = 1 << 0,
+	SWITCHTEC_PART_CFG_EVENT_MRPC_CMP = 1 << 1,
+	SWITCHTEC_PART_CFG_EVENT_MRPC_ASYNC_CMP = 1 << 2,
+	SWITCHTEC_PART_CFG_EVENT_DYN_PART_CMP = 1 << 3,
+};
+
+struct pff_csr_regs {
+	u16 vendor_id;
+	u16 device_id;
+	u32 pci_cfg_header[15];
+	u32 pci_cap_region[48];
+	u32 pcie_cap_region[448];
+	u32 indirect_gas_window[128];
+	u32 indirect_gas_window_off;
+	u32 reserved[127];
+	u32 pff_event_summary;
+	u32 reserved2[3];
+	u32 aer_in_p2p_hdr;
+	u32 aer_in_p2p_data[5];
+	u32 aer_in_vep_hdr;
+	u32 aer_in_vep_data[5];
+	u32 dpc_hdr;
+	u32 dpc_data[5];
+	u32 cts_hdr;
+	u32 cts_data[5];
+	u32 reserved3[6];
+	u32 hotplug_hdr;
+	u32 hotplug_data[5];
+	u32 ier_hdr;
+	u32 ier_data[5];
+	u32 threshold_hdr;
+	u32 threshold_data[5];
+	u32 power_mgmt_hdr;
+	u32 power_mgmt_data[5];
+	u32 tlp_throttling_hdr;
+	u32 tlp_throttling_data[5];
+	u32 force_speed_hdr;
+	u32 force_speed_data[5];
+	u32 credit_timeout_hdr;
+	u32 credit_timeout_data[5];
+	u32 link_state_hdr;
+	u32 link_state_data[5];
+	u32 reserved4[174];
+} __packed;
+
+struct switchtec_dev {
+	struct pci_dev *pdev;
+	struct device dev;
+	struct cdev cdev;
+
+	int partition;
+	int partition_count;
+	int pff_csr_count;
+	char pff_local[SWITCHTEC_MAX_PFF_CSR];
+
+	void __iomem *mmio;
+	struct mrpc_regs __iomem *mmio_mrpc;
+	struct sw_event_regs __iomem *mmio_sw_event;
+	struct sys_info_regs __iomem *mmio_sys_info;
+	struct flash_info_regs __iomem *mmio_flash_info;
+	struct ntb_info_regs __iomem *mmio_ntb;
+	struct part_cfg_regs __iomem *mmio_part_cfg;
+	struct part_cfg_regs __iomem *mmio_part_cfg_all;
+	struct pff_csr_regs __iomem *mmio_pff_csr;
+
+	/*
+	 * The mrpc mutex must be held when accessing the other
+	 * mrpc_ fields, alive flag and stuser->state field
+	 */
+	struct mutex mrpc_mutex;
+	struct list_head mrpc_queue;
+	int mrpc_busy;
+	struct work_struct mrpc_work;
+	struct delayed_work mrpc_timeout;
+	bool alive;
+
+	wait_queue_head_t event_wq;
+	atomic_t event_cnt;
+};
+
+static inline struct switchtec_dev *to_stdev(struct device *dev)
+{
+	return container_of(dev, struct switchtec_dev, dev);
+}
+
+#endif
-- 
2.11.0

[toc] | [prev] | [next] | [standalone]

#1696487 — [PATCH v3 08/16] switchtec_ntb: introduce initial NTB driver

Seeing the Switchtec NTB hardware shares the same endpoint as the
management endpoint we utilize the class_interface API to register
an NTB driver for every Switchtec device in the system that has the
NTB class code.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
---
 MAINTAINERS                         |  1 +
 drivers/ntb/hw/Kconfig              |  1 +
 drivers/ntb/hw/Makefile             |  1 +
 drivers/ntb/hw/mscc/Kconfig         |  9 +++++
 drivers/ntb/hw/mscc/Makefile        |  1 +
 drivers/ntb/hw/mscc/switchtec_ntb.c | 81 +++++++++++++++++++++++++++++++++++++
 drivers/pci/switch/switchtec.c      |  3 ++
 include/linux/switchtec.h           |  4 ++
 8 files changed, 101 insertions(+)
 create mode 100644 drivers/ntb/hw/mscc/Kconfig
 create mode 100644 drivers/ntb/hw/mscc/Makefile
 create mode 100644 drivers/ntb/hw/mscc/switchtec_ntb.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 4ff2ad7c1c7b..6e491ce5e876 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10147,6 +10147,7 @@ F:	Documentation/ABI/testing/sysfs-class-switchtec
 F:	drivers/pci/switch/switchtec*
 F:	include/uapi/linux/switchtec_ioctl.h
 F:	include/linux/switchtec.h
+F:	drivers/ntb/hw/mscc/
 
 PCI DRIVER FOR NVIDIA TEGRA
 M:	Thierry Reding <thierry.reding@gmail.com>
diff --git a/drivers/ntb/hw/Kconfig b/drivers/ntb/hw/Kconfig
index a89243c9fdd3..e51b581fd102 100644
--- a/drivers/ntb/hw/Kconfig
+++ b/drivers/ntb/hw/Kconfig
@@ -1,3 +1,4 @@
 source "drivers/ntb/hw/amd/Kconfig"
 source "drivers/ntb/hw/idt/Kconfig"
 source "drivers/ntb/hw/intel/Kconfig"
+source "drivers/ntb/hw/mscc/Kconfig"
diff --git a/drivers/ntb/hw/Makefile b/drivers/ntb/hw/Makefile
index 87332c3905f0..923c442db750 100644
--- a/drivers/ntb/hw/Makefile
+++ b/drivers/ntb/hw/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_NTB_AMD)	+= amd/
 obj-$(CONFIG_NTB_IDT)	+= idt/
 obj-$(CONFIG_NTB_INTEL)	+= intel/
+obj-$(CONFIG_NTB_SWITCHTEC) += mscc/
diff --git a/drivers/ntb/hw/mscc/Kconfig b/drivers/ntb/hw/mscc/Kconfig
new file mode 100644
index 000000000000..013ed6716438
--- /dev/null
+++ b/drivers/ntb/hw/mscc/Kconfig
@@ -0,0 +1,9 @@
+config NTB_SWITCHTEC
+	tristate "MicroSemi Switchtec Non-Transparent Bridge Support"
+	select PCI_SW_SWITCHTEC
+	help
+	 Enables NTB support for Switchtec PCI switches. This also
+	 selects the Switchtec management driver as they share the same
+	 hardware interface.
+
+	 If unsure, say N.
diff --git a/drivers/ntb/hw/mscc/Makefile b/drivers/ntb/hw/mscc/Makefile
new file mode 100644
index 000000000000..21907b364e19
--- /dev/null
+++ b/drivers/ntb/hw/mscc/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_NTB_SWITCHTEC) += switchtec_ntb.o
diff --git a/drivers/ntb/hw/mscc/switchtec_ntb.c b/drivers/ntb/hw/mscc/switchtec_ntb.c
new file mode 100644
index 000000000000..253efba72275
--- /dev/null
+++ b/drivers/ntb/hw/mscc/switchtec_ntb.c
@@ -0,0 +1,81 @@
+/*
+ * Microsemi Switchtec(tm) PCIe Management Driver
+ * Copyright (c) 2017, Microsemi Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/switchtec.h>
+#include <linux/module.h>
+
+MODULE_DESCRIPTION("Microsemi Switchtec(tm) NTB Driver");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Microsemi Corporation");
+
+struct switchtec_ntb {
+	struct switchtec_dev *stdev;
+};
+
+static int switchtec_ntb_add(struct device *dev,
+			     struct class_interface *class_intf)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+	struct switchtec_ntb *sndev;
+
+	stdev->sndev = NULL;
+
+	if (stdev->pdev->class != MICROSEMI_NTB_CLASSCODE)
+		return -ENODEV;
+
+	sndev = kzalloc_node(sizeof(*sndev), GFP_KERNEL, dev_to_node(dev));
+	if (!sndev)
+		return -ENOMEM;
+
+	sndev->stdev = stdev;
+
+	stdev->sndev = sndev;
+	dev_info(dev, "NTB device registered");
+
+	return 0;
+}
+
+void switchtec_ntb_remove(struct device *dev,
+			  struct class_interface *class_intf)
+{
+	struct switchtec_dev *stdev = to_stdev(dev);
+	struct switchtec_ntb *sndev = stdev->sndev;
+
+	if (!sndev)
+		return;
+
+	stdev->sndev = NULL;
+	kfree(sndev);
+	dev_info(dev, "ntb device unregistered");
+}
+
+static struct class_interface switchtec_interface  = {
+	.add_dev = switchtec_ntb_add,
+	.remove_dev = switchtec_ntb_remove,
+};
+
+static int __init switchtec_ntb_init(void)
+{
+	switchtec_interface.class = switchtec_class;
+	return class_interface_register(&switchtec_interface);
+}
+module_init(switchtec_ntb_init);
+
+static void __exit switchtec_ntb_exit(void)
+{
+	class_interface_unregister(&switchtec_interface);
+}
+module_exit(switchtec_ntb_exit);
diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index 807569e62bee..0666e33c305b 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -1275,6 +1275,9 @@ static int switchtec_pci_probe(struct pci_dev *pdev,
 	struct switchtec_dev *stdev;
 	int rc;
 
+	if (pdev->class == MICROSEMI_NTB_CLASSCODE)
+		request_module_nowait("switchtec_ntb");
+
 	stdev = stdev_create(pdev);
 	if (IS_ERR(stdev))
 		return PTR_ERR(stdev);
diff --git a/include/linux/switchtec.h b/include/linux/switchtec.h
index d8159944f013..09d73d0d1aa8 100644
--- a/include/linux/switchtec.h
+++ b/include/linux/switchtec.h
@@ -320,6 +320,8 @@ struct pff_csr_regs {
 	u32 reserved4[174];
 } __packed;
 
+struct switchtec_ntb;
+
 struct switchtec_dev {
 	struct pci_dev *pdev;
 	struct device dev;
@@ -357,6 +359,8 @@ struct switchtec_dev {
 	struct work_struct link_event_work;
 	void (*link_notifier)(struct switchtec_dev *stdev);
 	u8 link_event_count[SWITCHTEC_MAX_PFF_CSR];
+
+	struct switchtec_ntb *sndev;
 };
 
 static inline struct switchtec_dev *to_stdev(struct device *dev)
-- 
2.11.0

[toc] | [prev] | [next] | [standalone]

#1696488 — [PATCH v3 06/16] ntb: ensure ntb_mw_get_align() is only called when the link is up

With Switchtec hardware it's impossible to get the alignment parameters
for a peer's memory window until the peer's driver has configured it's
windows. Strictly speaking, the link doesn't have to be up for this,
but the link being up is the only way the client can tell that
the otherside has been configured.

This patch converts ntb_transport and ntb_perf to use this function after
the link goes up. This simplifies these clients slightly because they
no longer have to store the alignment parameters. It also tweaks
ntb_tool so that peer_mw_trans will print zero if it is run before
the link goes up.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
---
 drivers/ntb/ntb_transport.c | 20 ++++++++++----------
 drivers/ntb/test/ntb_perf.c | 18 +++++++++---------
 drivers/ntb/test/ntb_tool.c |  6 +++---
 3 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c
index b29558ddfe95..7ed745aaa213 100644
--- a/drivers/ntb/ntb_transport.c
+++ b/drivers/ntb/ntb_transport.c
@@ -191,8 +191,6 @@ struct ntb_transport_qp {
 struct ntb_transport_mw {
 	phys_addr_t phys_addr;
 	resource_size_t phys_size;
-	resource_size_t xlat_align;
-	resource_size_t xlat_align_size;
 	void __iomem *vbase;
 	size_t xlat_size;
 	size_t buff_size;
@@ -687,13 +685,20 @@ static int ntb_set_mw(struct ntb_transport_ctx *nt, int num_mw,
 	struct ntb_transport_mw *mw = &nt->mw_vec[num_mw];
 	struct pci_dev *pdev = nt->ndev->pdev;
 	size_t xlat_size, buff_size;
+	resource_size_t xlat_align;
+	resource_size_t xlat_align_size;
 	int rc;
 
 	if (!size)
 		return -EINVAL;
 
-	xlat_size = round_up(size, mw->xlat_align_size);
-	buff_size = round_up(size, mw->xlat_align);
+	rc = ntb_mw_get_align(nt->ndev, PIDX, num_mw, &xlat_align,
+			      &xlat_align_size, NULL);
+	if (rc)
+		return rc;
+
+	xlat_size = round_up(size, xlat_align_size);
+	buff_size = round_up(size, xlat_align);
 
 	/* No need to re-setup */
 	if (mw->xlat_size == xlat_size)
@@ -722,7 +727,7 @@ static int ntb_set_mw(struct ntb_transport_ctx *nt, int num_mw,
 	 * is a requirement of the hardware. It is recommended to setup CMA
 	 * for BAR sizes equal or greater than 4MB.
 	 */
-	if (!IS_ALIGNED(mw->dma_addr, mw->xlat_align)) {
+	if (!IS_ALIGNED(mw->dma_addr, xlat_align)) {
 		dev_err(&pdev->dev, "DMA memory %pad is not aligned\n",
 			&mw->dma_addr);
 		ntb_free_mw(nt, num_mw);
@@ -1106,11 +1111,6 @@ static int ntb_transport_probe(struct ntb_client *self, struct ntb_dev *ndev)
 	for (i = 0; i < mw_count; i++) {
 		mw = &nt->mw_vec[i];
 
-		rc = ntb_mw_get_align(ndev, PIDX, i, &mw->xlat_align,
-				      &mw->xlat_align_size, NULL);
-		if (rc)
-			goto err1;
-
 		rc = ntb_peer_mw_get_addr(ndev, i, &mw->phys_addr,
 					  &mw->phys_size);
 		if (rc)
diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
index 759f772fa00c..427112cf101a 100644
--- a/drivers/ntb/test/ntb_perf.c
+++ b/drivers/ntb/test/ntb_perf.c
@@ -108,8 +108,6 @@ MODULE_PARM_DESC(on_node, "Run threads only on NTB device node (default: true)")
 struct perf_mw {
 	phys_addr_t	phys_addr;
 	resource_size_t	phys_size;
-	resource_size_t	xlat_align;
-	resource_size_t	xlat_align_size;
 	void __iomem	*vbase;
 	size_t		xlat_size;
 	size_t		buf_size;
@@ -472,13 +470,20 @@ static int perf_set_mw(struct perf_ctx *perf, resource_size_t size)
 {
 	struct perf_mw *mw = &perf->mw;
 	size_t xlat_size, buf_size;
+	resource_size_t	xlat_align;
+	resource_size_t	xlat_align_size;
 	int rc;
 
 	if (!size)
 		return -EINVAL;
 
-	xlat_size = round_up(size, mw->xlat_align_size);
-	buf_size = round_up(size, mw->xlat_align);
+	rc = ntb_mw_get_align(perf->ntb, PIDX, 0, &xlat_align,
+			      &xlat_align_size, NULL);
+	if (rc)
+		return rc;
+
+	xlat_size = round_up(size, xlat_align_size);
+	buf_size = round_up(size, xlat_align);
 
 	if (mw->xlat_size == xlat_size)
 		return 0;
@@ -567,11 +572,6 @@ static int perf_setup_mw(struct ntb_dev *ntb, struct perf_ctx *perf)
 
 	mw = &perf->mw;
 
-	rc = ntb_mw_get_align(ntb, PIDX, 0, &mw->xlat_align,
-			      &mw->xlat_align_size, NULL);
-	if (rc)
-		return rc;
-
 	rc = ntb_peer_mw_get_addr(ntb, 0, &mw->phys_addr, &mw->phys_size);
 	if (rc)
 		return rc;
diff --git a/drivers/ntb/test/ntb_tool.c b/drivers/ntb/test/ntb_tool.c
index a69815c45ce6..91526a986caa 100644
--- a/drivers/ntb/test/ntb_tool.c
+++ b/drivers/ntb/test/ntb_tool.c
@@ -753,9 +753,9 @@ static ssize_t tool_peer_mw_trans_read(struct file *filep,
 
 	phys_addr_t base;
 	resource_size_t mw_size;
-	resource_size_t align_addr;
-	resource_size_t align_size;
-	resource_size_t max_size;
+	resource_size_t align_addr = 0;
+	resource_size_t align_size = 0;
+	resource_size_t max_size = 0;
 
 	buf_size = min_t(size_t, size, 512);
 
-- 
2.11.0

[toc] | [prev] | [next] | [standalone]

#1697083

From: Logan Gunthorpe
> Changes since v2:
> 
> - Reordered the ntb_test link patch per Allen
> - Removed an extra call to switchtec_ntb_init_mw
> - Fixed a typo in the switchtec.txt documentation.

Patches 5..16 (also 5 [was 6], and 14, objections notwithstanding):

Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>

> --
> 
> Changes since v1:
> 
> - Rebased onto latest ntb-next branch (with v4.13-rc1)
> - Reworked ntb_mw_count() function so that it can be called all the
>   time (per discussion with Allen)
> - Various spelling and formatting cleanups from Bjorn
> - Added request_module() call such that the NTB module is automatically
>   loaded when appropriate hardware exists.
> 
> --
> 
> Changes since the rfc:
> 
> - Rebased on ntb-next
> - Switched ntb_part_op to use sleep instead of delay
> - Dropped a number of useless dbg __func__ prints
> - Went back to the dynamic instead of the static class
> - Swapped the notifier block for a simple callback
> - Modified the new ntb api so that a couple functions with pidx
>   now must be called after link up. Per our discussion on the list.
> 
> --
> 
> This patchset implements Non-Transparent Bridge (NTB) support for the
> Microsemi Switchtec series of switches. We're looking for some
> review from the community at this point but hope to get it upstreamed
> for v4.14.
> 
> Switchtec NTB support is configured over the same function and bar
> as the management endpoint. Thus, the new driver hooks into the
> management driver which we had merged in v4.12. We use the class
> interface API to register an NTB device for every switchtec device
> which supports NTB (not all do).
> 
> The Switchtec hardware supports doorbells, memory windows and messages.
> Seeing there is no native scratchpad support, 128 spads are emulated
> through the use of a pre-setup memory window. The switch has 64
> doorbells which are shared between the two partitions and a
> configurable set of memory windows. While the hardware supports more
> than 2 partitions, this driver only supports the first two seeing
> the current NTB API only supports two hosts.
> 
> The driver has been tested with ntb_netdev and fully passes the
> ntb_test script.
> 
> This patchset is based off of ntb-next and can be found in this
> git repo:
> 
> https://github.com/sbates130272/linux-p2pmem.git switchtec_ntb_v3
> 
> *** BLURB HERE ***
> 
> Logan Gunthorpe (16):
>   switchtec: move structure definitions into a common header
>   switchtec: export class symbol for use in upper layer driver
>   switchtec: add NTB hardware register definitions
>   switchtec: add link event notifier callback
>   ntb: ntb_test: ensure the link is up before trying to configure the
>     mws
>   ntb: ensure ntb_mw_get_align() is only called when the link is up
>   ntb: add check and comment for link up to mw_count() and
>     mw_get_align()
>   switchtec_ntb: introduce initial NTB driver
>   switchtec_ntb: initialize hardware for memory windows
>   switchtec_ntb: initialize hardware for doorbells and messages
>   switchtec_ntb: add skeleton NTB driver
>   switchtec_ntb: add link management
>   switchtec_ntb: implement doorbell registers
>   switchtec_ntb: implement scratchpad registers
>   switchtec_ntb: add memory window support
>   switchtec_ntb: update switchtec documentation with notes for NTB
> 
>  Documentation/switchtec.txt             |   12 +
>  MAINTAINERS                             |    2 +
>  drivers/ntb/hw/Kconfig                  |    1 +
>  drivers/ntb/hw/Makefile                 |    1 +
>  drivers/ntb/hw/mscc/Kconfig             |    9 +
>  drivers/ntb/hw/mscc/Makefile            |    1 +
>  drivers/ntb/hw/mscc/switchtec_ntb.c     | 1211 +++++++++++++++++++++++++++++++
>  drivers/ntb/ntb_transport.c             |   20 +-
>  drivers/ntb/test/ntb_perf.c             |   18 +-
>  drivers/ntb/test/ntb_tool.c             |    6 +-
>  drivers/pci/switch/switchtec.c          |  316 ++------
>  include/linux/ntb.h                     |   11 +-
>  include/linux/switchtec.h               |  373 ++++++++++
>  tools/testing/selftests/ntb/ntb_test.sh |    4 +
>  14 files changed, 1702 insertions(+), 283 deletions(-)
>  create mode 100644 drivers/ntb/hw/mscc/Kconfig
>  create mode 100644 drivers/ntb/hw/mscc/Makefile
>  create mode 100644 drivers/ntb/hw/mscc/switchtec_ntb.c
>  create mode 100644 include/linux/switchtec.h
> 
> --
> 2.11.0

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web