Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1694480 > unrolled thread
| Started by | Baolin Wang <baolin.wang@spreadtrum.com> |
|---|---|
| First post | 2017-07-24 09:00 +0200 |
| Last post | 2017-07-27 11:30 +0200 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [RESEND PATCH v4 1/2] dt-bindings: i2c: Add Spreadtrum I2C controller documentation Baolin Wang <baolin.wang@spreadtrum.com> - 2017-07-24 09:00 +0200
Re: [RESEND PATCH v4 1/2] dt-bindings: i2c: Add Spreadtrum I2C controller documentation Baolin Wang <baolin.wang@linaro.org> - 2017-07-27 11:30 +0200
| From | Baolin Wang <baolin.wang@spreadtrum.com> |
|---|---|
| Date | 2017-07-24 09:00 +0200 |
| Subject | Re: [RESEND PATCH v4 1/2] dt-bindings: i2c: Add Spreadtrum I2C controller documentation |
| Message-ID | <u6Fvr-1jj-9@gated-at.bofh.it> |
Hi Wolfram,
On 五, 7月 14, 2017 at 05:01:10下午 +0800, Baolin Wang wrote:
> This patch adds the binding documentation for Spreadtrum I2C
> controller device.
>
> Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> Changes since v3:
> - Add Ack from RobH.
>
> Changes since v2:
> - Change compatible strings to be SoC specific.
>
> Changes since v1:
> - No updates.
> ---
Could you apply this patchset if there are no other comments?
It is a long time since the v4 was send out. Thanks.
> Documentation/devicetree/bindings/i2c/i2c-sprd.txt | 31 ++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sprd.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-sprd.txt b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt
> new file mode 100644
> index 0000000..60b7cda
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt
> @@ -0,0 +1,31 @@
> +I2C for Spreadtrum platforms
> +
> +Required properties:
> +- compatible: Should be "sprd,sc9860-i2c".
> +- reg: Specify the physical base address of the controller and length
> + of memory mapped region.
> +- interrupts: Should contain I2C interrupt.
> +- clock-names: Should contain following entries:
> + "i2c" for I2C clock,
> + "source" for I2C source (parent) clock,
> + "enable" for I2C module enable clock.
> +- clocks: Should contain a clock specifier for each entry in clock-names.
> +- clock-frequency: Constains desired I2C bus clock frequency in Hz.
> +- #address-cells: Should be 1 to describe address cells for I2C device address.
> +- #size-cells: Should be 0 means no size cell for I2C device address.
> +
> +Optional properties:
> +- Child nodes conforming to I2C bus binding
> +
> +Examples:
> +i2c0: i2c@70500000 {
> + compatible = "sprd,sc9860-i2c";
> + reg = <0 0x70500000 0 0x1000>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + clock-names = "i2c", "source", "enable";
> + clocks = <&clk_i2c3>, <&ext_26m>, <&clk_ap_apb_gates 11>;
> + clock-frequency = <400000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +};
> +
> --
> 1.7.9.5
>
[toc] | [next] | [standalone]
| From | Baolin Wang <baolin.wang@linaro.org> |
|---|---|
| Date | 2017-07-27 11:30 +0200 |
| Message-ID | <u7Nhf-4j3-9@gated-at.bofh.it> |
| In reply to | #1694480 |
Hi Wolfram,
On 24 July 2017 at 14:51, Baolin Wang <baolin.wang@spreadtrum.com> wrote:
> Hi Wolfram,
>
> On 五, 7月 14, 2017 at 05:01:10下午 +0800, Baolin Wang wrote:
>> This patch adds the binding documentation for Spreadtrum I2C
>> controller device.
>>
>> Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
>> Acked-by: Rob Herring <robh@kernel.org>
>> ---
>> Changes since v3:
>> - Add Ack from RobH.
>>
>> Changes since v2:
>> - Change compatible strings to be SoC specific.
>>
>> Changes since v1:
>> - No updates.
>> ---
>
> Could you apply this patchset if there are no other comments?
> It is a long time since the v4 was send out. Thanks.
Ping?
>
>> Documentation/devicetree/bindings/i2c/i2c-sprd.txt | 31 ++++++++++++++++++++
>> 1 file changed, 31 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sprd.txt
>>
>> diff --git a/Documentation/devicetree/bindings/i2c/i2c-sprd.txt b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt
>> new file mode 100644
>> index 0000000..60b7cda
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt
>> @@ -0,0 +1,31 @@
>> +I2C for Spreadtrum platforms
>> +
>> +Required properties:
>> +- compatible: Should be "sprd,sc9860-i2c".
>> +- reg: Specify the physical base address of the controller and length
>> + of memory mapped region.
>> +- interrupts: Should contain I2C interrupt.
>> +- clock-names: Should contain following entries:
>> + "i2c" for I2C clock,
>> + "source" for I2C source (parent) clock,
>> + "enable" for I2C module enable clock.
>> +- clocks: Should contain a clock specifier for each entry in clock-names.
>> +- clock-frequency: Constains desired I2C bus clock frequency in Hz.
>> +- #address-cells: Should be 1 to describe address cells for I2C device address.
>> +- #size-cells: Should be 0 means no size cell for I2C device address.
>> +
>> +Optional properties:
>> +- Child nodes conforming to I2C bus binding
>> +
>> +Examples:
>> +i2c0: i2c@70500000 {
>> + compatible = "sprd,sc9860-i2c";
>> + reg = <0 0x70500000 0 0x1000>;
>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> + clock-names = "i2c", "source", "enable";
>> + clocks = <&clk_i2c3>, <&ext_26m>, <&clk_ap_apb_gates 11>;
>> + clock-frequency = <400000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +};
>> +
>> --
>> 1.7.9.5
>>
--
Baolin.wang
Best Regards
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web