Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1690983 > unrolled thread

Re: [PATCH] KVM: VMX: Fix invalid guest state detection after task-switch emulation

Started byWanpeng Li <kernellwp@gmail.com>
First post2017-07-19 07:40 +0200
Last post2017-07-20 01:10 +0200
Articles 10 — 3 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH] KVM: VMX: Fix invalid guest state detection after  task-switch emulation Wanpeng Li <kernellwp@gmail.com> - 2017-07-19 07:40 +0200
    [PATCH] KVM: VMX: Fix invalid guest state detection after  task-switch emulation Radim Krčmář <rkrcmar@redhat.com> - 2017-07-19 13:30 +0200
      Re: [PATCH] KVM: VMX: Fix invalid guest state detection after  task-switch emulation Nadav Amit <nadav.amit@gmail.com> - 2017-07-19 17:20 +0200
        [PATCH v2] KVM: VMX: Fix invalid guest state detection after  task-switch emulation Radim Krčmář <rkrcmar@redhat.com> - 2017-07-19 18:30 +0200
          Re: [PATCH v2] KVM: VMX: Fix invalid guest state detection after  task-switch emulation Nadav Amit <nadav.amit@gmail.com> - 2017-07-19 18:30 +0200
            Re: [PATCH v2] KVM: VMX: Fix invalid guest state detection after  task-switch emulation Wanpeng Li <kernellwp@gmail.com> - 2017-07-20 00:50 +0200
              Re: [PATCH v2] KVM: VMX: Fix invalid guest state detection after  task-switch emulation Nadav Amit <nadav.amit@gmail.com> - 2017-07-20 01:00 +0200
                Re: [PATCH v2] KVM: VMX: Fix invalid guest state detection after  task-switch emulation Nadav Amit <nadav.amit@gmail.com> - 2017-07-20 01:10 +0200
                  Re: [PATCH v2] KVM: VMX: Fix invalid guest state detection after  task-switch emulation Wanpeng Li <kernellwp@gmail.com> - 2017-07-20 01:20 +0200
                Re: [PATCH v2] KVM: VMX: Fix invalid guest state detection after  task-switch emulation Wanpeng Li <kernellwp@gmail.com> - 2017-07-20 01:10 +0200

#1690983 — Re: [PATCH] KVM: VMX: Fix invalid guest state detection after task-switch emulation

FromWanpeng Li <kernellwp@gmail.com>
Date2017-07-19 07:40 +0200
SubjectRe: [PATCH] KVM: VMX: Fix invalid guest state detection after task-switch emulation
Message-ID<u4PSh-45S-11@gated-at.bofh.it>
Ping, :)
2017-07-11 15:13 GMT+08:00 Wanpeng Li <kernellwp@gmail.com>:
> From: Wanpeng Li <wanpeng.li@hotmail.com>
>
> This can be reproduced by EPT=1, unrestricted_guest=N, emulate_invalid_state=Y
> or EPT=0, the trace of kvm-unit-tests/taskswitch2.flat is like below, it tries
> to emulate invalid guest state task-switch:
>
> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
> kvm_emulate_insn: 42000:0:0f 0b (0x2)
> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
> kvm_inj_exception: #UD (0x0)
> kvm_entry: vcpu 0
> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
> kvm_emulate_insn: 42000:0:0f 0b (0x2)
> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
> kvm_inj_exception: #UD (0x0)
> ......................
>
> It appears that the task-switch emulation updates rflags (and vm86
> flag) only after the segments are loaded, causing vmx->emulation_required
> to be set, when in fact invalid guest state emulation is not needed.
>
> This patch fixes it by updating vmx->emulation_required after the
> rflags (and vm86 flag) is updated in task-switch emulation.
>
> Suggested-by: Nadav Amit <nadav.amit@gmail.com>
> Cc: Paolo Bonzini <pbonzini@redhat.com>
> Cc: Radim Krčmář <rkrcmar@redhat.com>
> Cc: Nadav Amit <nadav.amit@gmail.com>
> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
> ---
>  arch/x86/kvm/vmx.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index f50cbfd..70270a2 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -6255,6 +6255,7 @@ static int handle_task_switch(struct kvm_vcpu *vcpu)
>          * TODO: What about debug traps on tss switch?
>          *       Are we supposed to inject them and update dr6?
>          */
> +       vmx->emulation_required = emulation_required(vcpu);
>
>         return 1;
>  }
> --
> 2.7.4
>

[toc] | [next] | [standalone]

#1691525

FromRadim Krčmář <rkrcmar@redhat.com>
Date2017-07-19 13:30 +0200
Message-ID<u4Vl0-7Rv-7@gated-at.bofh.it>
In reply to#1690983
2017-07-19 13:34+0800, Wanpeng Li:
> Ping, :)

I misunderstood where the ball is ... is the patch below ok?

---8<---
This can be reproduced by EPT=1, unrestricted_guest=N, emulate_invalid_state=Y
or EPT=0, the trace of kvm-unit-tests/taskswitch2.flat is like below, it
tries to emulate invalid guest state task-switch:

kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
kvm_emulate_insn: 42000:0:0f 0b (0x2)
kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
kvm_inj_exception: #UD (0x0)
kvm_entry: vcpu 0
kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
kvm_emulate_insn: 42000:0:0f 0b (0x2)
kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
kvm_inj_exception: #UD (0x0)

It appears that the task-switch emulation updates rflags (and vm86 flag)
only after the segments are loaded, causing vmx->emulation_required to
be set, when in fact invalid guest state emulation is not needed.

This patch fixes it by updating vmx->emulation_required after the rflags
(and vm86 flag) is updated.

Suggested-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
[Wanpeng wrote the commit message with initial patch and Radim moved the
 update to vmx_set_rflags and added Paolo's suggestion for the check.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
---
 arch/x86/kvm/vmx.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 84e62acf2dd8..a776aea0043a 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2326,6 +2326,11 @@ static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
 	__vmx_load_host_state(to_vmx(vcpu));
 }
 
+static bool emulation_required(struct kvm_vcpu *vcpu)
+{
+	return emulate_invalid_guest_state && !guest_state_valid(vcpu);
+}
+
 static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
 
 /*
@@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
 
 static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
 {
+	unsigned long old_rflags = to_vmx(vcpu)->rflags;
+
 	__set_bit(VCPU_EXREG_RFLAGS, (ulong *)&vcpu->arch.regs_avail);
 	to_vmx(vcpu)->rflags = rflags;
 	if (to_vmx(vcpu)->rmode.vm86_active) {
@@ -2370,6 +2377,9 @@ static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
 		rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
 	}
 	vmcs_writel(GUEST_RFLAGS, rflags);
+
+	if ((old_rflags ^ rflags) & X86_EFLAGS_VM)
+		to_vmx(vcpu)->emulation_required = emulation_required(vcpu);
 }
 
 static u32 vmx_get_pkru(struct kvm_vcpu *vcpu)
@@ -3857,11 +3867,6 @@ static __init int alloc_kvm_area(void)
 	return 0;
 }
 
-static bool emulation_required(struct kvm_vcpu *vcpu)
-{
-	return emulate_invalid_guest_state && !guest_state_valid(vcpu);
-}
-
 static void fix_pmode_seg(struct kvm_vcpu *vcpu, int seg,
 		struct kvm_segment *save)
 {
-- 
2.13.2

[toc] | [prev] | [next] | [standalone]

#1691834

FromNadav Amit <nadav.amit@gmail.com>
Date2017-07-19 17:20 +0200
Message-ID<u4YVz-1TU-1@gated-at.bofh.it>
In reply to#1691525
Radim Krčmář <rkrcmar@redhat.com> wrote:

> 2017-07-19 13:34+0800, Wanpeng Li:
>> Ping, :)
> 
> I misunderstood where the ball is ... is the patch below ok?
> 
> ---8<---
> This can be reproduced by EPT=1, unrestricted_guest=N, emulate_invalid_state=Y
> or EPT=0, the trace of kvm-unit-tests/taskswitch2.flat is like below, it
> tries to emulate invalid guest state task-switch:
> 
> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
> kvm_emulate_insn: 42000:0:0f 0b (0x2)
> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
> kvm_inj_exception: #UD (0x0)
> kvm_entry: vcpu 0
> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
> kvm_emulate_insn: 42000:0:0f 0b (0x2)
> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
> kvm_inj_exception: #UD (0x0)
> 
> It appears that the task-switch emulation updates rflags (and vm86 flag)
> only after the segments are loaded, causing vmx->emulation_required to
> be set, when in fact invalid guest state emulation is not needed.
> 
> This patch fixes it by updating vmx->emulation_required after the rflags
> (and vm86 flag) is updated.
> 
> Suggested-by: Nadav Amit <nadav.amit@gmail.com>
> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
> [Wanpeng wrote the commit message with initial patch and Radim moved the
> update to vmx_set_rflags and added Paolo's suggestion for the check.]
> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
> ---
> arch/x86/kvm/vmx.c | 15 ++++++++++-----
> 1 file changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index 84e62acf2dd8..a776aea0043a 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -2326,6 +2326,11 @@ static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
> 	__vmx_load_host_state(to_vmx(vcpu));
> }
> 
> +static bool emulation_required(struct kvm_vcpu *vcpu)
> +{
> +	return emulate_invalid_guest_state && !guest_state_valid(vcpu);
> +}
> +
> static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
> 
> /*
> @@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
> 
> static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
> {
> +	unsigned long old_rflags = to_vmx(vcpu)->rflags;

It assumes rflags was decached from the VMCS before. Probably it is true, but…

[toc] | [prev] | [next] | [standalone]

#1692005 — [PATCH v2] KVM: VMX: Fix invalid guest state detection after task-switch emulation

FromRadim Krčmář <rkrcmar@redhat.com>
Date2017-07-19 18:30 +0200
Subject[PATCH v2] KVM: VMX: Fix invalid guest state detection after task-switch emulation
Message-ID<u501j-2Gh-3@gated-at.bofh.it>
In reply to#1691834
2017-07-19 08:14-0700, Nadav Amit:
> Radim Krčmář <rkrcmar@redhat.com> wrote:
> > @@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
> > 
> > static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
> > {
> > +	unsigned long old_rflags = to_vmx(vcpu)->rflags;
> 
> It assumes rflags was decached from the VMCS before. Probably it is true, but…

Right, it's better to use accessors everywhere, thanks.
The line should read:

+	unsigned long old_rflags = vmx_get_rflags(vcpu);

---8<---
This can be reproduced by EPT=1, unrestricted_guest=N, emulate_invalid_state=Y
or EPT=0, the trace of kvm-unit-tests/taskswitch2.flat is like below, it
tries to emulate invalid guest state task-switch:

kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
kvm_emulate_insn: 42000:0:0f 0b (0x2)
kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
kvm_inj_exception: #UD (0x0)
kvm_entry: vcpu 0
kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
kvm_emulate_insn: 42000:0:0f 0b (0x2)
kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
kvm_inj_exception: #UD (0x0)

It appears that the task-switch emulation updates rflags (and vm86 flag)
only after the segments are loaded, causing vmx->emulation_required to
be set, when in fact invalid guest state emulation is not needed.

This patch fixes it by updating vmx->emulation_required after the rflags
(and vm86 flag) is updated.

Suggested-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
[Wanpeng wrote the commit message with initial patch and Radim moved the
 update to vmx_set_rflags and added Paolo's suggestion for the check.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
---
 arch/x86/kvm/vmx.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 84e62acf2dd8..a776aea0043a 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2326,6 +2326,11 @@ static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
 	__vmx_load_host_state(to_vmx(vcpu));
 }
 
+static bool emulation_required(struct kvm_vcpu *vcpu)
+{
+	return emulate_invalid_guest_state && !guest_state_valid(vcpu);
+}
+
 static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
 
 /*
@@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
 
 static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
 {
+	unsigned long old_rflags = vmx_get_rflags(vcpu);
+
 	__set_bit(VCPU_EXREG_RFLAGS, (ulong *)&vcpu->arch.regs_avail);
 	to_vmx(vcpu)->rflags = rflags;
 	if (to_vmx(vcpu)->rmode.vm86_active) {
@@ -2370,6 +2377,9 @@ static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
 		rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
 	}
 	vmcs_writel(GUEST_RFLAGS, rflags);
+
+	if ((old_rflags ^ rflags) & X86_EFLAGS_VM)
+		to_vmx(vcpu)->emulation_required = emulation_required(vcpu);
 }
 
 static u32 vmx_get_pkru(struct kvm_vcpu *vcpu)
@@ -3857,11 +3867,6 @@ static __init int alloc_kvm_area(void)
 	return 0;
 }
 
-static bool emulation_required(struct kvm_vcpu *vcpu)
-{
-	return emulate_invalid_guest_state && !guest_state_valid(vcpu);
-}
-
 static void fix_pmode_seg(struct kvm_vcpu *vcpu, int seg,
 		struct kvm_segment *save)
 {
-- 
2.13.2

[toc] | [prev] | [next] | [standalone]

#1692007 — Re: [PATCH v2] KVM: VMX: Fix invalid guest state detection after task-switch emulation

FromNadav Amit <nadav.amit@gmail.com>
Date2017-07-19 18:30 +0200
SubjectRe: [PATCH v2] KVM: VMX: Fix invalid guest state detection after task-switch emulation
Message-ID<u501j-2Gh-11@gated-at.bofh.it>
In reply to#1692005
Radim Krčmář <rkrcmar@redhat.com> wrote:

> 2017-07-19 08:14-0700, Nadav Amit:
>> Radim Krčmář <rkrcmar@redhat.com> wrote:
>>> @@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
>>> 
>>> static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>>> {
>>> +	unsigned long old_rflags = to_vmx(vcpu)->rflags;
>> 
>> It assumes rflags was decached from the VMCS before. Probably it is true, but…
> 
> Right, it's better to use accessors everywhere, thanks.
> The line should read:
> 
> +	unsigned long old_rflags = vmx_get_rflags(vcpu);
> 
> ---8<---
> This can be reproduced by EPT=1, unrestricted_guest=N, emulate_invalid_state=Y
> or EPT=0, the trace of kvm-unit-tests/taskswitch2.flat is like below, it
> tries to emulate invalid guest state task-switch:
> 
> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
> kvm_emulate_insn: 42000:0:0f 0b (0x2)
> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
> kvm_inj_exception: #UD (0x0)
> kvm_entry: vcpu 0
> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
> kvm_emulate_insn: 42000:0:0f 0b (0x2)
> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
> kvm_inj_exception: #UD (0x0)
> 
> It appears that the task-switch emulation updates rflags (and vm86 flag)
> only after the segments are loaded, causing vmx->emulation_required to
> be set, when in fact invalid guest state emulation is not needed.
> 
> This patch fixes it by updating vmx->emulation_required after the rflags
> (and vm86 flag) is updated.
> 
> Suggested-by: Nadav Amit <nadav.amit@gmail.com>
> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
> [Wanpeng wrote the commit message with initial patch and Radim moved the
> update to vmx_set_rflags and added Paolo's suggestion for the check.]
> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
> ---
> arch/x86/kvm/vmx.c | 15 ++++++++++-----
> 1 file changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index 84e62acf2dd8..a776aea0043a 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -2326,6 +2326,11 @@ static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
> 	__vmx_load_host_state(to_vmx(vcpu));
> }
> 
> +static bool emulation_required(struct kvm_vcpu *vcpu)
> +{
> +	return emulate_invalid_guest_state && !guest_state_valid(vcpu);
> +}
> +
> static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
> 
> /*
> @@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
> 
> static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
> {
> +	unsigned long old_rflags = vmx_get_rflags(vcpu);
> +
> 	__set_bit(VCPU_EXREG_RFLAGS, (ulong *)&vcpu->arch.regs_avail);
> 	to_vmx(vcpu)->rflags = rflags;
> 	if (to_vmx(vcpu)->rmode.vm86_active) {
> @@ -2370,6 +2377,9 @@ static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
> 		rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
> 	}
> 	vmcs_writel(GUEST_RFLAGS, rflags);
> +
> +	if ((old_rflags ^ rflags) & X86_EFLAGS_VM)
> +		to_vmx(vcpu)->emulation_required = emulation_required(vcpu);

Sorry for not pointing it before, but here you compare the old_rflags with
the new rflags but after you already “massaged” it. So the value you compare
with is not what the guest “sees”.

[toc] | [prev] | [next] | [standalone]

#1692241 — Re: [PATCH v2] KVM: VMX: Fix invalid guest state detection after task-switch emulation

FromWanpeng Li <kernellwp@gmail.com>
Date2017-07-20 00:50 +0200
SubjectRe: [PATCH v2] KVM: VMX: Fix invalid guest state detection after task-switch emulation
Message-ID<u55X3-6Hd-3@gated-at.bofh.it>
In reply to#1692007
2017-07-20 0:25 GMT+08:00 Nadav Amit <nadav.amit@gmail.com>:
> Radim Krčmář <rkrcmar@redhat.com> wrote:
>
>> 2017-07-19 08:14-0700, Nadav Amit:
>>> Radim Krčmář <rkrcmar@redhat.com> wrote:
>>>> @@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
>>>>
>>>> static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>>>> {
>>>> +   unsigned long old_rflags = to_vmx(vcpu)->rflags;
>>>
>>> It assumes rflags was decached from the VMCS before. Probably it is true, but…
>>
>> Right, it's better to use accessors everywhere, thanks.
>> The line should read:
>>
>> +     unsigned long old_rflags = vmx_get_rflags(vcpu);
>>
>> ---8<---
>> This can be reproduced by EPT=1, unrestricted_guest=N, emulate_invalid_state=Y
>> or EPT=0, the trace of kvm-unit-tests/taskswitch2.flat is like below, it
>> tries to emulate invalid guest state task-switch:
>>
>> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
>> kvm_emulate_insn: 42000:0:0f 0b (0x2)
>> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
>> kvm_inj_exception: #UD (0x0)
>> kvm_entry: vcpu 0
>> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
>> kvm_emulate_insn: 42000:0:0f 0b (0x2)
>> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
>> kvm_inj_exception: #UD (0x0)
>>
>> It appears that the task-switch emulation updates rflags (and vm86 flag)
>> only after the segments are loaded, causing vmx->emulation_required to
>> be set, when in fact invalid guest state emulation is not needed.
>>
>> This patch fixes it by updating vmx->emulation_required after the rflags
>> (and vm86 flag) is updated.
>>
>> Suggested-by: Nadav Amit <nadav.amit@gmail.com>
>> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
>> [Wanpeng wrote the commit message with initial patch and Radim moved the
>> update to vmx_set_rflags and added Paolo's suggestion for the check.]
>> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
>> ---
>> arch/x86/kvm/vmx.c | 15 ++++++++++-----
>> 1 file changed, 10 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
>> index 84e62acf2dd8..a776aea0043a 100644
>> --- a/arch/x86/kvm/vmx.c
>> +++ b/arch/x86/kvm/vmx.c
>> @@ -2326,6 +2326,11 @@ static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
>>       __vmx_load_host_state(to_vmx(vcpu));
>> }
>>
>> +static bool emulation_required(struct kvm_vcpu *vcpu)
>> +{
>> +     return emulate_invalid_guest_state && !guest_state_valid(vcpu);
>> +}
>> +
>> static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
>>
>> /*
>> @@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
>>
>> static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>> {
>> +     unsigned long old_rflags = vmx_get_rflags(vcpu);
>> +
>>       __set_bit(VCPU_EXREG_RFLAGS, (ulong *)&vcpu->arch.regs_avail);
>>       to_vmx(vcpu)->rflags = rflags;
>>       if (to_vmx(vcpu)->rmode.vm86_active) {
>> @@ -2370,6 +2377,9 @@ static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>>               rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
>>       }
>>       vmcs_writel(GUEST_RFLAGS, rflags);
>> +
>> +     if ((old_rflags ^ rflags) & X86_EFLAGS_VM)
>> +             to_vmx(vcpu)->emulation_required = emulation_required(vcpu);
>
> Sorry for not pointing it before, but here you compare the old_rflags with
> the new rflags but after you already “massaged” it. So the value you compare
> with is not what the guest “sees”.

So you mean we should use unsigned long old_rflags =
vmcs_readl(GUEST_RFLAGS); right?

Regards,
Wanpeng Li

[toc] | [prev] | [next] | [standalone]

#1692244 — Re: [PATCH v2] KVM: VMX: Fix invalid guest state detection after task-switch emulation

FromNadav Amit <nadav.amit@gmail.com>
Date2017-07-20 01:00 +0200
SubjectRe: [PATCH v2] KVM: VMX: Fix invalid guest state detection after task-switch emulation
Message-ID<u566K-6L0-5@gated-at.bofh.it>
In reply to#1692241
Wanpeng Li <kernellwp@gmail.com> wrote:

> 2017-07-20 0:25 GMT+08:00 Nadav Amit <nadav.amit@gmail.com>:
>> Radim Krčmář <rkrcmar@redhat.com> wrote:
>> 
>>> 2017-07-19 08:14-0700, Nadav Amit:
>>>> Radim Krčmář <rkrcmar@redhat.com> wrote:
>>>>> @@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
>>>>> 
>>>>> static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>>>>> {
>>>>> +   unsigned long old_rflags = to_vmx(vcpu)->rflags;
>>>> 
>>>> It assumes rflags was decached from the VMCS before. Probably it is true, but…
>>> 
>>> Right, it's better to use accessors everywhere, thanks.
>>> The line should read:
>>> 
>>> +     unsigned long old_rflags = vmx_get_rflags(vcpu);
>>> 
>>> ---8<---
>>> This can be reproduced by EPT=1, unrestricted_guest=N, emulate_invalid_state=Y
>>> or EPT=0, the trace of kvm-unit-tests/taskswitch2.flat is like below, it
>>> tries to emulate invalid guest state task-switch:
>>> 
>>> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
>>> kvm_emulate_insn: 42000:0:0f 0b (0x2)
>>> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
>>> kvm_inj_exception: #UD (0x0)
>>> kvm_entry: vcpu 0
>>> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
>>> kvm_emulate_insn: 42000:0:0f 0b (0x2)
>>> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
>>> kvm_inj_exception: #UD (0x0)
>>> 
>>> It appears that the task-switch emulation updates rflags (and vm86 flag)
>>> only after the segments are loaded, causing vmx->emulation_required to
>>> be set, when in fact invalid guest state emulation is not needed.
>>> 
>>> This patch fixes it by updating vmx->emulation_required after the rflags
>>> (and vm86 flag) is updated.
>>> 
>>> Suggested-by: Nadav Amit <nadav.amit@gmail.com>
>>> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
>>> [Wanpeng wrote the commit message with initial patch and Radim moved the
>>> update to vmx_set_rflags and added Paolo's suggestion for the check.]
>>> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
>>> ---
>>> arch/x86/kvm/vmx.c | 15 ++++++++++-----
>>> 1 file changed, 10 insertions(+), 5 deletions(-)
>>> 
>>> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
>>> index 84e62acf2dd8..a776aea0043a 100644
>>> --- a/arch/x86/kvm/vmx.c
>>> +++ b/arch/x86/kvm/vmx.c
>>> @@ -2326,6 +2326,11 @@ static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
>>>      __vmx_load_host_state(to_vmx(vcpu));
>>> }
>>> 
>>> +static bool emulation_required(struct kvm_vcpu *vcpu)
>>> +{
>>> +     return emulate_invalid_guest_state && !guest_state_valid(vcpu);
>>> +}
>>> +
>>> static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
>>> 
>>> /*
>>> @@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
>>> 
>>> static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>>> {
>>> +     unsigned long old_rflags = vmx_get_rflags(vcpu);
>>> +
>>>      __set_bit(VCPU_EXREG_RFLAGS, (ulong *)&vcpu->arch.regs_avail);
>>>      to_vmx(vcpu)->rflags = rflags;
>>>      if (to_vmx(vcpu)->rmode.vm86_active) {
>>> @@ -2370,6 +2377,9 @@ static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>>>              rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
>>>      }
>>>      vmcs_writel(GUEST_RFLAGS, rflags);
>>> +
>>> +     if ((old_rflags ^ rflags) & X86_EFLAGS_VM)
>>> +             to_vmx(vcpu)->emulation_required = emulation_required(vcpu);
>> 
>> Sorry for not pointing it before, but here you compare the old_rflags with
>> the new rflags but after you already “massaged” it. So the value you compare
>> with is not what the guest “sees”.
> 
> So you mean we should use unsigned long old_rflags =
> vmcs_readl(GUEST_RFLAGS); right?

No. The problem is not with old_rflags now, but with rflags. If vm86_active,
then rflags is changed and you don’t compare the guest-visible rflags
anymore.

[toc] | [prev] | [next] | [standalone]

#1692250 — Re: [PATCH v2] KVM: VMX: Fix invalid guest state detection after task-switch emulation

FromNadav Amit <nadav.amit@gmail.com>
Date2017-07-20 01:10 +0200
SubjectRe: [PATCH v2] KVM: VMX: Fix invalid guest state detection after task-switch emulation
Message-ID<u56gp-73P-3@gated-at.bofh.it>
In reply to#1692244
Wanpeng Li <kernellwp@gmail.com> wrote:

> 2017-07-20 6:53 GMT+08:00 Nadav Amit <nadav.amit@gmail.com>:
>> Wanpeng Li <kernellwp@gmail.com> wrote:
>> 
>>> 2017-07-20 0:25 GMT+08:00 Nadav Amit <nadav.amit@gmail.com>:
>>>> Radim Krčmář <rkrcmar@redhat.com> wrote:
>>>> 
>>>>> 2017-07-19 08:14-0700, Nadav Amit:
>>>>>> Radim Krčmář <rkrcmar@redhat.com> wrote:
>>>>>>> @@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
>>>>>>> 
>>>>>>> static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>>>>>>> {
>>>>>>> +   unsigned long old_rflags = to_vmx(vcpu)->rflags;
>>>>>> 
>>>>>> It assumes rflags was decached from the VMCS before. Probably it is true, but…
>>>>> 
>>>>> Right, it's better to use accessors everywhere, thanks.
>>>>> The line should read:
>>>>> 
>>>>> +     unsigned long old_rflags = vmx_get_rflags(vcpu);
>>>>> 
>>>>> ---8<---
>>>>> This can be reproduced by EPT=1, unrestricted_guest=N, emulate_invalid_state=Y
>>>>> or EPT=0, the trace of kvm-unit-tests/taskswitch2.flat is like below, it
>>>>> tries to emulate invalid guest state task-switch:
>>>>> 
>>>>> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
>>>>> kvm_emulate_insn: 42000:0:0f 0b (0x2)
>>>>> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
>>>>> kvm_inj_exception: #UD (0x0)
>>>>> kvm_entry: vcpu 0
>>>>> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
>>>>> kvm_emulate_insn: 42000:0:0f 0b (0x2)
>>>>> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
>>>>> kvm_inj_exception: #UD (0x0)
>>>>> 
>>>>> It appears that the task-switch emulation updates rflags (and vm86 flag)
>>>>> only after the segments are loaded, causing vmx->emulation_required to
>>>>> be set, when in fact invalid guest state emulation is not needed.
>>>>> 
>>>>> This patch fixes it by updating vmx->emulation_required after the rflags
>>>>> (and vm86 flag) is updated.
>>>>> 
>>>>> Suggested-by: Nadav Amit <nadav.amit@gmail.com>
>>>>> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
>>>>> [Wanpeng wrote the commit message with initial patch and Radim moved the
>>>>> update to vmx_set_rflags and added Paolo's suggestion for the check.]
>>>>> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
>>>>> ---
>>>>> arch/x86/kvm/vmx.c | 15 ++++++++++-----
>>>>> 1 file changed, 10 insertions(+), 5 deletions(-)
>>>>> 
>>>>> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
>>>>> index 84e62acf2dd8..a776aea0043a 100644
>>>>> --- a/arch/x86/kvm/vmx.c
>>>>> +++ b/arch/x86/kvm/vmx.c
>>>>> @@ -2326,6 +2326,11 @@ static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
>>>>>     __vmx_load_host_state(to_vmx(vcpu));
>>>>> }
>>>>> 
>>>>> +static bool emulation_required(struct kvm_vcpu *vcpu)
>>>>> +{
>>>>> +     return emulate_invalid_guest_state && !guest_state_valid(vcpu);
>>>>> +}
>>>>> +
>>>>> static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
>>>>> 
>>>>> /*
>>>>> @@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
>>>>> 
>>>>> static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>>>>> {
>>>>> +     unsigned long old_rflags = vmx_get_rflags(vcpu);
>>>>> +
>>>>>     __set_bit(VCPU_EXREG_RFLAGS, (ulong *)&vcpu->arch.regs_avail);
>>>>>     to_vmx(vcpu)->rflags = rflags;
>>>>>     if (to_vmx(vcpu)->rmode.vm86_active) {
>>>>> @@ -2370,6 +2377,9 @@ static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>>>>>             rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
>>>>>     }
>>>>>     vmcs_writel(GUEST_RFLAGS, rflags);
>>>>> +
>>>>> +     if ((old_rflags ^ rflags) & X86_EFLAGS_VM)
>>>>> +             to_vmx(vcpu)->emulation_required = emulation_required(vcpu);
>>>> 
>>>> Sorry for not pointing it before, but here you compare the old_rflags with
>>>> the new rflags but after you already “massaged” it. So the value you compare
>>>> with is not what the guest “sees”.
>>> 
>>> So you mean we should use unsigned long old_rflags =
>>> vmcs_readl(GUEST_RFLAGS); right?
>> 
>> No. The problem is not with old_rflags now, but with rflags. If vm86_active,
>> then rflags is changed and you don’t compare the guest-visible rflags
>> anymore.
> 
> Ah, I see. So we should compare the old_flags with the
> rmode->save_rflags(guest-visible rflags) instead of the rflags (shadow
> rflags), right?

Not exactly, since rmode->save_rflags are invalid if !vm86_active. Instead,
I think you should have a save_rflags variable on the stack that would hold
the rflags before “massaging” and use it instead.

[toc] | [prev] | [next] | [standalone]

#1692259 — Re: [PATCH v2] KVM: VMX: Fix invalid guest state detection after task-switch emulation

FromWanpeng Li <kernellwp@gmail.com>
Date2017-07-20 01:20 +0200
SubjectRe: [PATCH v2] KVM: VMX: Fix invalid guest state detection after task-switch emulation
Message-ID<u56q6-77M-15@gated-at.bofh.it>
In reply to#1692250
2017-07-20 7:06 GMT+08:00 Nadav Amit <nadav.amit@gmail.com>:
> Wanpeng Li <kernellwp@gmail.com> wrote:
>
>> 2017-07-20 6:53 GMT+08:00 Nadav Amit <nadav.amit@gmail.com>:
>>> Wanpeng Li <kernellwp@gmail.com> wrote:
>>>
>>>> 2017-07-20 0:25 GMT+08:00 Nadav Amit <nadav.amit@gmail.com>:
>>>>> Radim Krčmář <rkrcmar@redhat.com> wrote:
>>>>>
>>>>>> 2017-07-19 08:14-0700, Nadav Amit:
>>>>>>> Radim Krčmář <rkrcmar@redhat.com> wrote:
>>>>>>>> @@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
>>>>>>>>
>>>>>>>> static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>>>>>>>> {
>>>>>>>> +   unsigned long old_rflags = to_vmx(vcpu)->rflags;
>>>>>>>
>>>>>>> It assumes rflags was decached from the VMCS before. Probably it is true, but…
>>>>>>
>>>>>> Right, it's better to use accessors everywhere, thanks.
>>>>>> The line should read:
>>>>>>
>>>>>> +     unsigned long old_rflags = vmx_get_rflags(vcpu);
>>>>>>
>>>>>> ---8<---
>>>>>> This can be reproduced by EPT=1, unrestricted_guest=N, emulate_invalid_state=Y
>>>>>> or EPT=0, the trace of kvm-unit-tests/taskswitch2.flat is like below, it
>>>>>> tries to emulate invalid guest state task-switch:
>>>>>>
>>>>>> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
>>>>>> kvm_emulate_insn: 42000:0:0f 0b (0x2)
>>>>>> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
>>>>>> kvm_inj_exception: #UD (0x0)
>>>>>> kvm_entry: vcpu 0
>>>>>> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
>>>>>> kvm_emulate_insn: 42000:0:0f 0b (0x2)
>>>>>> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
>>>>>> kvm_inj_exception: #UD (0x0)
>>>>>>
>>>>>> It appears that the task-switch emulation updates rflags (and vm86 flag)
>>>>>> only after the segments are loaded, causing vmx->emulation_required to
>>>>>> be set, when in fact invalid guest state emulation is not needed.
>>>>>>
>>>>>> This patch fixes it by updating vmx->emulation_required after the rflags
>>>>>> (and vm86 flag) is updated.
>>>>>>
>>>>>> Suggested-by: Nadav Amit <nadav.amit@gmail.com>
>>>>>> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
>>>>>> [Wanpeng wrote the commit message with initial patch and Radim moved the
>>>>>> update to vmx_set_rflags and added Paolo's suggestion for the check.]
>>>>>> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
>>>>>> ---
>>>>>> arch/x86/kvm/vmx.c | 15 ++++++++++-----
>>>>>> 1 file changed, 10 insertions(+), 5 deletions(-)
>>>>>>
>>>>>> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
>>>>>> index 84e62acf2dd8..a776aea0043a 100644
>>>>>> --- a/arch/x86/kvm/vmx.c
>>>>>> +++ b/arch/x86/kvm/vmx.c
>>>>>> @@ -2326,6 +2326,11 @@ static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
>>>>>>     __vmx_load_host_state(to_vmx(vcpu));
>>>>>> }
>>>>>>
>>>>>> +static bool emulation_required(struct kvm_vcpu *vcpu)
>>>>>> +{
>>>>>> +     return emulate_invalid_guest_state && !guest_state_valid(vcpu);
>>>>>> +}
>>>>>> +
>>>>>> static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
>>>>>>
>>>>>> /*
>>>>>> @@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
>>>>>>
>>>>>> static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>>>>>> {
>>>>>> +     unsigned long old_rflags = vmx_get_rflags(vcpu);
>>>>>> +
>>>>>>     __set_bit(VCPU_EXREG_RFLAGS, (ulong *)&vcpu->arch.regs_avail);
>>>>>>     to_vmx(vcpu)->rflags = rflags;
>>>>>>     if (to_vmx(vcpu)->rmode.vm86_active) {
>>>>>> @@ -2370,6 +2377,9 @@ static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>>>>>>             rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
>>>>>>     }
>>>>>>     vmcs_writel(GUEST_RFLAGS, rflags);
>>>>>> +
>>>>>> +     if ((old_rflags ^ rflags) & X86_EFLAGS_VM)
>>>>>> +             to_vmx(vcpu)->emulation_required = emulation_required(vcpu);
>>>>>
>>>>> Sorry for not pointing it before, but here you compare the old_rflags with
>>>>> the new rflags but after you already “massaged” it. So the value you compare
>>>>> with is not what the guest “sees”.
>>>>
>>>> So you mean we should use unsigned long old_rflags =
>>>> vmcs_readl(GUEST_RFLAGS); right?
>>>
>>> No. The problem is not with old_rflags now, but with rflags. If vm86_active,
>>> then rflags is changed and you don’t compare the guest-visible rflags
>>> anymore.
>>
>> Ah, I see. So we should compare the old_flags with the
>> rmode->save_rflags(guest-visible rflags) instead of the rflags (shadow
>> rflags), right?
>
> Not exactly, since rmode->save_rflags are invalid if !vm86_active. Instead,
> I think you should have a save_rflags variable on the stack that would hold
> the rflags before “massaging” and use it instead.

Thanks for pointing out :) I will send out a new version, in addition,
thanks Radim's help for these two versions. :)

Regards,
Wanpeng Li

[toc] | [prev] | [next] | [standalone]

#1692252 — Re: [PATCH v2] KVM: VMX: Fix invalid guest state detection after task-switch emulation

FromWanpeng Li <kernellwp@gmail.com>
Date2017-07-20 01:10 +0200
SubjectRe: [PATCH v2] KVM: VMX: Fix invalid guest state detection after task-switch emulation
Message-ID<u56gp-73P-5@gated-at.bofh.it>
In reply to#1692244
2017-07-20 6:53 GMT+08:00 Nadav Amit <nadav.amit@gmail.com>:
> Wanpeng Li <kernellwp@gmail.com> wrote:
>
>> 2017-07-20 0:25 GMT+08:00 Nadav Amit <nadav.amit@gmail.com>:
>>> Radim Krčmář <rkrcmar@redhat.com> wrote:
>>>
>>>> 2017-07-19 08:14-0700, Nadav Amit:
>>>>> Radim Krčmář <rkrcmar@redhat.com> wrote:
>>>>>> @@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
>>>>>>
>>>>>> static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>>>>>> {
>>>>>> +   unsigned long old_rflags = to_vmx(vcpu)->rflags;
>>>>>
>>>>> It assumes rflags was decached from the VMCS before. Probably it is true, but…
>>>>
>>>> Right, it's better to use accessors everywhere, thanks.
>>>> The line should read:
>>>>
>>>> +     unsigned long old_rflags = vmx_get_rflags(vcpu);
>>>>
>>>> ---8<---
>>>> This can be reproduced by EPT=1, unrestricted_guest=N, emulate_invalid_state=Y
>>>> or EPT=0, the trace of kvm-unit-tests/taskswitch2.flat is like below, it
>>>> tries to emulate invalid guest state task-switch:
>>>>
>>>> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
>>>> kvm_emulate_insn: 42000:0:0f 0b (0x2)
>>>> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
>>>> kvm_inj_exception: #UD (0x0)
>>>> kvm_entry: vcpu 0
>>>> kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
>>>> kvm_emulate_insn: 42000:0:0f 0b (0x2)
>>>> kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
>>>> kvm_inj_exception: #UD (0x0)
>>>>
>>>> It appears that the task-switch emulation updates rflags (and vm86 flag)
>>>> only after the segments are loaded, causing vmx->emulation_required to
>>>> be set, when in fact invalid guest state emulation is not needed.
>>>>
>>>> This patch fixes it by updating vmx->emulation_required after the rflags
>>>> (and vm86 flag) is updated.
>>>>
>>>> Suggested-by: Nadav Amit <nadav.amit@gmail.com>
>>>> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
>>>> [Wanpeng wrote the commit message with initial patch and Radim moved the
>>>> update to vmx_set_rflags and added Paolo's suggestion for the check.]
>>>> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
>>>> ---
>>>> arch/x86/kvm/vmx.c | 15 ++++++++++-----
>>>> 1 file changed, 10 insertions(+), 5 deletions(-)
>>>>
>>>> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
>>>> index 84e62acf2dd8..a776aea0043a 100644
>>>> --- a/arch/x86/kvm/vmx.c
>>>> +++ b/arch/x86/kvm/vmx.c
>>>> @@ -2326,6 +2326,11 @@ static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
>>>>      __vmx_load_host_state(to_vmx(vcpu));
>>>> }
>>>>
>>>> +static bool emulation_required(struct kvm_vcpu *vcpu)
>>>> +{
>>>> +     return emulate_invalid_guest_state && !guest_state_valid(vcpu);
>>>> +}
>>>> +
>>>> static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
>>>>
>>>> /*
>>>> @@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
>>>>
>>>> static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>>>> {
>>>> +     unsigned long old_rflags = vmx_get_rflags(vcpu);
>>>> +
>>>>      __set_bit(VCPU_EXREG_RFLAGS, (ulong *)&vcpu->arch.regs_avail);
>>>>      to_vmx(vcpu)->rflags = rflags;
>>>>      if (to_vmx(vcpu)->rmode.vm86_active) {
>>>> @@ -2370,6 +2377,9 @@ static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
>>>>              rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
>>>>      }
>>>>      vmcs_writel(GUEST_RFLAGS, rflags);
>>>> +
>>>> +     if ((old_rflags ^ rflags) & X86_EFLAGS_VM)
>>>> +             to_vmx(vcpu)->emulation_required = emulation_required(vcpu);
>>>
>>> Sorry for not pointing it before, but here you compare the old_rflags with
>>> the new rflags but after you already “massaged” it. So the value you compare
>>> with is not what the guest “sees”.
>>
>> So you mean we should use unsigned long old_rflags =
>> vmcs_readl(GUEST_RFLAGS); right?
>
> No. The problem is not with old_rflags now, but with rflags. If vm86_active,
> then rflags is changed and you don’t compare the guest-visible rflags
> anymore.

Ah, I see. So we should compare the old_flags with the
rmode->save_rflags(guest-visible rflags) instead of the rflags (shadow
rflags), right?

Regards,
Wanpeng Li

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web