Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1690941 > unrolled thread

Re: [PATCH v2] PCI: dwc: designware: test PCIE_ATU_ENABLE bit to check enabled or not

Started by"Jingoo Han" <jingoohan1@gmail.com>
First post2017-07-19 05:30 +0200
Last post2017-07-19 05:30 +0200
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  Re: [PATCH v2] PCI: dwc: designware: test PCIE_ATU_ENABLE bit to check enabled or not "Jingoo Han" <jingoohan1@gmail.com> - 2017-07-19 05:30 +0200

#1690941 — Re: [PATCH v2] PCI: dwc: designware: test PCIE_ATU_ENABLE bit to check enabled or not

From"Jingoo Han" <jingoohan1@gmail.com>
Date2017-07-19 05:30 +0200
SubjectRe: [PATCH v2] PCI: dwc: designware: test PCIE_ATU_ENABLE bit to check enabled or not
Message-ID<u4NQt-2L1-7@gated-at.bofh.it>
On Tuesday, July 18, 2017 2:48 AM, Jisheng Zhang wrote:
> 
> The ATU CTRL2 register is 32 bit, besides the enable bit, other bits
> may also be set. To check whether the ATU is enabled or not, we should
> test the enable bit.
> 
> Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
> Acked-by: Joao Pinto <jpinto@synopsys.com>

Acked-by: Jingoo Han <jingoohan1@gmail.com>

Best regards,
Jingoo Han


> ---
> Since v1:
>  - Add Joao's Ack
>  - Fix typo in commit msg, thank Jingoo
> 
>  drivers/pci/dwc/pcie-designware.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-
> designware.c
> index 0e03af279259..6bf0b409050a 100644
> --- a/drivers/pci/dwc/pcie-designware.c
> +++ b/drivers/pci/dwc/pcie-designware.c
> @@ -177,7 +177,7 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci,
> int index, int type,
>  	 */
>  	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++)
> {
>  		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
> -		if (val == PCIE_ATU_ENABLE)
> +		if (val & PCIE_ATU_ENABLE)
>  			return;
> 
>  		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
> --
> 2.13.2

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web