Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1683198 > unrolled thread

Re: [PATCH 3/3] dt-binding: remoteproc: Add the bindings required for Q6 - WCSS core

Started byRob Herring <robh@kernel.org>
First post2017-07-07 15:50 +0200
Last post2017-07-07 20:20 +0200
Articles 2 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH 3/3] dt-binding: remoteproc: Add the bindings required  for Q6 - WCSS core Rob Herring <robh@kernel.org> - 2017-07-07 15:50 +0200
    Re: [PATCH 3/3] dt-binding: remoteproc: Add the bindings required for  Q6 - WCSS core Sricharan R <sricharan@codeaurora.org> - 2017-07-07 20:20 +0200

#1683198 — Re: [PATCH 3/3] dt-binding: remoteproc: Add the bindings required for Q6 - WCSS core

FromRob Herring <robh@kernel.org>
Date2017-07-07 15:50 +0200
SubjectRe: [PATCH 3/3] dt-binding: remoteproc: Add the bindings required for Q6 - WCSS core
Message-ID<u0BNT-4Ks-1@gated-at.bofh.it>
On Thu, Jun 29, 2017 at 07:47:41PM +0530, Sricharan R wrote:
> IPQ8074 has an integrated Q6V5 Hexagon dsp - Lithium Wlan (WCSS) core.
> This patch adds the required bindings to load, boot, shutdown that
> remoteproc subsystem.
> 
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> ---
>  .../bindings/remoteproc/qcom,q6v5-wcss.txt         | 139 +++++++++++++++++++++
>  1 file changed, 139 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,q6v5-wcss.txt
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5-wcss.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5-wcss.txt
> new file mode 100644
> index 0000000..f664c26
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5-wcss.txt
> @@ -0,0 +1,139 @@
> +Qualcomm Hexagon (Q6) - WCSS Peripheral Image Loader
> +
> +This document defines the binding for a component that loads and boots firmware
> +on the integrated Qualcomm Hexagon - WCSS core.
> +
> +- compatible:
> +	Usage: required
> +	Value type: <string>
> +	Definition: must be one of:
> +		    "qcom,q6v5-wcss-pil",
> +- reg:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: must specify the base address and size of the qdsp6 and
> +		    mpm (msm power manager) register blocks.
> +
> +- reg-names:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be "q6" and "mpm"
> +
> +- interrupts-extended:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: must list the watchdog, fatal IRQs ready, handover and

fatal, ready, ...

> +		    stop-ack IRQs
> +
> +- interrupt-names:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
> +
> +- clocks:
> +	Usage: required
> +	Value type: <phandle>

These are not just a phandle. 

> +	Definition: references to the axim-q6, axim2-q6, axi-wcss,
> +		    ahb-q6, ahbs-q6, ahb-wcss, ahbs-wcss, sysnoc and mem.
> +		    to be held on behalf of the booting of the Hexagon and WCSS
> +		    core. These are the interface, bus, mem clocks required for
> +		    the Q6 and WCSS cores.
> +
> +- clock-names:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be "axim-q6", "axim2-q6", "axi-wcss", "ahb-q6",
> +			    "ahbs-q6", "ahb-wcss", "ahbs-wcss", "sysnoc", "mem"
> +
> +- resets:
> +	Usage: required
> +	Value type: <phandle>
> +	Definition: reference to the reset-controller for the Q6-WCSS sub-system

This should be a list of 3 resets.
> +
> +- reset-names:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
> +
> +- qcom,smem-states:
> +	Usage: required
> +	Value type: <phandle>
> +	Definition: reference to the smem state for requesting the Hexagon to
> +		    shut down
> +
> +- qcom,smem-state-names:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be "stop"
> +
> +- qcom,halt-regs:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: a phandle reference to a syscon representing TCSR followed
> +		    by the three offsets within syscon for q6, wcss and tcsr global
> +		    halt registers.
> +
> += SUBNODES:
> +The Hexagon node must contain a subnode, named "q6" representing
> +the memory region used by the Hexagon firmware. The sub-node must contain:

Why does this need a sub-node?

> +
> +- memory-region:
> +	Usage: required
> +	Value type: <phandle>
> +	Definition: reference to the reserved-memory for the Q6 firmware region
> +
> += EXAMPLE
> +The following example describes the resources needed to boot control the
> +Hexagon, as it is found on IPQ8074 boards.
> +
> +	q6v5_wcss: q6v5_wcss@CD00000 {

s/_/-/ in the node name.

> +		compatible = "q6v5-wcss-pil";
> +		reg = <0xCD00000 0x4040>,
> +		      <0x4ab000 0x20>;
> +		reg-names = "q6",
> +			    "mpm";
> +		interrupts-extended = <&intc 0 325 1>,
> +				      <&wcss_smp2p_in 0 0>,
> +				      <&wcss_smp2p_in 1 0>,
> +				      <&wcss_smp2p_in 3 0>;
> +		interrupt-names = "wdog",
> +				  "fatal",
> +				  "handover",
> +				  "stop-ack";
> +		clocks = <&gcc GCC_SYS_NOC_WCSS_AHB_CLK>,
> +			 <&gcc GCC_WCSS_AHB_S_CLK>,
> +			 <&gcc GCC_WCSS_ECAHB_CLK>,
> +			 <&gcc GCC_Q6_AHB_CLK>,
> +			 <&gcc GCC_Q6_AHB_S_CLK>,
> +			 <&gcc GCC_WCSS_AXI_M_CLK>,
> +			 <&gcc GCC_MEM_NOC_Q6_AXI_CLK>,
> +			 <&gcc GCC_Q6_AXIM_CLK>,
> +			 <&gcc GCC_Q6_AXIM2_CLK>;
> +		clock-names = "sysnoc",
> +			      "ahb-wcss",
> +			      "ahbs-wcss",
> +			      "ahb-q6",
> +			      "ahbs-q6",
> +			      "axi-wcss",
> +			      "memnoc",
> +			      "axim-q6",
> +			      "axim2-q6";
> +
> +		resets = <&gcc GCC_WCSSAON_RESET>,
> +			 <&gcc GCC_WCSS_BCR>,
> +			 <&gcc GCC_WCSS_Q6_BCR>;
> +
> +		reset-names = "wcss_aon_reset",
> +			      "wcss_reset",
> +			      "wcss_q6_reset";
> +
> +		qcom,halt-regs = <&tcsr_mutex_block 0x0 0xA000 0xD000>;
> +
> +		qcom,smem-states = <&wcss_smp2p_out 0>,
> +				   <&wcss_smp2p_out 1>;
> +		qcom,smem-state-names = "shutdown",
> +					"stop";
> +		q6 {
> +			memory-region = <&q6_region>;
> +		};
> +	};
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
>

[toc] | [next] | [standalone]

#1683356 — Re: [PATCH 3/3] dt-binding: remoteproc: Add the bindings required for Q6 - WCSS core

FromSricharan R <sricharan@codeaurora.org>
Date2017-07-07 20:20 +0200
SubjectRe: [PATCH 3/3] dt-binding: remoteproc: Add the bindings required for Q6 - WCSS core
Message-ID<u0G1b-7Gw-11@gated-at.bofh.it>
In reply to#1683198
Hi Rob,

Thanks for the review.

On 7/7/2017 7:17 PM, Rob Herring wrote:
> On Thu, Jun 29, 2017 at 07:47:41PM +0530, Sricharan R wrote:
>> IPQ8074 has an integrated Q6V5 Hexagon dsp - Lithium Wlan (WCSS) core.
>> This patch adds the required bindings to load, boot, shutdown that
>> remoteproc subsystem.
>>
>> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
>> ---
>>  .../bindings/remoteproc/qcom,q6v5-wcss.txt         | 139 +++++++++++++++++++++
>>  1 file changed, 139 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,q6v5-wcss.txt
>>
>> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5-wcss.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5-wcss.txt
>> new file mode 100644
>> index 0000000..f664c26
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5-wcss.txt
>> @@ -0,0 +1,139 @@
>> +Qualcomm Hexagon (Q6) - WCSS Peripheral Image Loader
>> +
>> +This document defines the binding for a component that loads and boots firmware
>> +on the integrated Qualcomm Hexagon - WCSS core.
>> +
>> +- compatible:
>> +	Usage: required
>> +	Value type: <string>
>> +	Definition: must be one of:
>> +		    "qcom,q6v5-wcss-pil",
>> +- reg:
>> +	Usage: required
>> +	Value type: <prop-encoded-array>
>> +	Definition: must specify the base address and size of the qdsp6 and
>> +		    mpm (msm power manager) register blocks.
>> +
>> +- reg-names:
>> +	Usage: required
>> +	Value type: <stringlist>
>> +	Definition: must be "q6" and "mpm"
>> +
>> +- interrupts-extended:
>> +	Usage: required
>> +	Value type: <prop-encoded-array>
>> +	Definition: must list the watchdog, fatal IRQs ready, handover and
> 
> fatal, ready, ...

 ok, will simplify.

> 
>> +		    stop-ack IRQs
>> +
>> +- interrupt-names:
>> +	Usage: required
>> +	Value type: <stringlist>
>> +	Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
>> +
>> +- clocks:
>> +	Usage: required
>> +	Value type: <phandle>
> 
> These are not just a phandle. 

 hmm ok. Will correct.

> 
>> +	Definition: references to the axim-q6, axim2-q6, axi-wcss,
>> +		    ahb-q6, ahbs-q6, ahb-wcss, ahbs-wcss, sysnoc and mem.
>> +		    to be held on behalf of the booting of the Hexagon and WCSS
>> +		    core. These are the interface, bus, mem clocks required for
>> +		    the Q6 and WCSS cores.
>> +
>> +- clock-names:
>> +	Usage: required
>> +	Value type: <stringlist>
>> +	Definition: must be "axim-q6", "axim2-q6", "axi-wcss", "ahb-q6",
>> +			    "ahbs-q6", "ahb-wcss", "ahbs-wcss", "sysnoc", "mem"
>> +
>> +- resets:
>> +	Usage: required
>> +	Value type: <phandle>
>> +	Definition: reference to the reset-controller for the Q6-WCSS sub-system
> 
> This should be a list of 3 resets.

 ok.

>> +
>> +- reset-names:
>> +	Usage: required
>> +	Value type: <stringlist>
>> +	Definition: must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
>> +
>> +- qcom,smem-states:
>> +	Usage: required
>> +	Value type: <phandle>
>> +	Definition: reference to the smem state for requesting the Hexagon to
>> +		    shut down
>> +
>> +- qcom,smem-state-names:
>> +	Usage: required
>> +	Value type: <stringlist>
>> +	Definition: must be "stop"
>> +
>> +- qcom,halt-regs:
>> +	Usage: required
>> +	Value type: <prop-encoded-array>
>> +	Definition: a phandle reference to a syscon representing TCSR followed
>> +		    by the three offsets within syscon for q6, wcss and tcsr global
>> +		    halt registers.
>> +
>> += SUBNODES:
>> +The Hexagon node must contain a subnode, named "q6" representing
>> +the memory region used by the Hexagon firmware. The sub-node must contain:
> 
> Why does this need a sub-node?

 Right, just the property. Had it correctly in code, missed to change here.
 
> 
>> +
>> +- memory-region:
>> +	Usage: required
>> +	Value type: <phandle>
>> +	Definition: reference to the reserved-memory for the Q6 firmware region
>> +
>> += EXAMPLE
>> +The following example describes the resources needed to boot control the
>> +Hexagon, as it is found on IPQ8074 boards.
>> +
>> +	q6v5_wcss: q6v5_wcss@CD00000 {
> 
> s/_/-/ in the node name.

 ok.

Regards,
 Sricharan

-- 
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web