Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1623004 > unrolled thread

KMS question

Back to article view | Back to linux.kernel

Contents

  KMS question Boszormenyi Zoltan <zboszor@pr.hu> - 2017-04-13 15:10 +0200
    Re: KMS question Alex Deucher <alexdeucher@gmail.com> - 2017-04-13 16:10 +0200
      Re: KMS question Boszormenyi Zoltan <zboszor@pr.hu> - 2017-04-13 17:10 +0200
        Re: KMS question Ilia Mirkin <imirkin@alum.mit.edu> - 2017-04-13 17:40 +0200
          Re: KMS question Ville Syrjälä <ville.syrjala@linux.intel.com> - 2017-04-13 18:30 +0200
            Re: KMS question Boszormenyi Zoltan <zboszor@pr.hu> - 2017-04-13 19:40 +0200
        Re: KMS question Alex Deucher <alexdeucher@gmail.com> - 2017-04-13 17:40 +0200
          Re: KMS question Boszormenyi Zoltan <zboszor@pr.hu> - 2017-04-13 17:50 +0200

#1623004 — KMS question

Hi,

how can I disable the behaviour in the KMS drivers
that enables all outputs at once?

It is very annoying that on a POS machine with an
1024x768 LVDS and a 800x480 secondary monitor (both built-in)
the KMS driver wakes up both. Then the framebuffer console
and plymouth use both screens, making the primary output
very odd with only the top-left part used by the boot splash.

I would like the boot splash to be shown only on the primary
output at its full resolution instead of on all outputs using
the smallest common rectangle.

Is there a kernel command line configuration that achieves this?

The device in question uses the gma500 kernel driver but the same
behaviour is observed with the i915 and radeon drivers.

Thanks in advance,
Zoltán Böszörmenyi

[toc] | [next] | [standalone]

#1623066

On Thu, Apr 13, 2017 at 9:03 AM, Boszormenyi Zoltan <zboszor@pr.hu> wrote:
> Hi,
>
> how can I disable the behaviour in the KMS drivers
> that enables all outputs at once?
>
> It is very annoying that on a POS machine with an
> 1024x768 LVDS and a 800x480 secondary monitor (both built-in)
> the KMS driver wakes up both. Then the framebuffer console
> and plymouth use both screens, making the primary output
> very odd with only the top-left part used by the boot splash.
>
> I would like the boot splash to be shown only on the primary
> output at its full resolution instead of on all outputs using
> the smallest common rectangle.
>
> Is there a kernel command line configuration that achieves this?
>
> The device in question uses the gma500 kernel driver but the same
> behaviour is observed with the i915 and radeon drivers.
>

The problem is fbdev is not multi-head aware.  The fbdev emulation in
the KMS drivers attempts to light up all monitors so that something
shows up on all heads.  If you really want different per head
configurations, you need to use the KMS API directly.  As a
workaround, you can use the kernel command line to disable the output
you don't want to be lit up.  See:
https://wiki.archlinux.org/index.php/kernel_mode_setting
for more info.  basically add video=TV-1:d to disable the output in
question.  Replace TV-1 with whatever connector you want to disable.

Alex

[toc] | [prev] | [next] | [standalone]

#1623113

2017-04-13 16:05 keltezéssel, Alex Deucher írta:
> On Thu, Apr 13, 2017 at 9:03 AM, Boszormenyi Zoltan <zboszor@pr.hu> wrote:
>> Hi,
>>
>> how can I disable the behaviour in the KMS drivers
>> that enables all outputs at once?
>>
>> It is very annoying that on a POS machine with an
>> 1024x768 LVDS and a 800x480 secondary monitor (both built-in)
>> the KMS driver wakes up both. Then the framebuffer console
>> and plymouth use both screens, making the primary output
>> very odd with only the top-left part used by the boot splash.
>>
>> I would like the boot splash to be shown only on the primary
>> output at its full resolution instead of on all outputs using
>> the smallest common rectangle.
>>
>> Is there a kernel command line configuration that achieves this?
>>
>> The device in question uses the gma500 kernel driver but the same
>> behaviour is observed with the i915 and radeon drivers.
>>
> 
> The problem is fbdev is not multi-head aware.  The fbdev emulation in
> the KMS drivers attempts to light up all monitors so that something
> shows up on all heads.  If you really want different per head
> configurations, you need to use the KMS API directly.  As a
> workaround, you can use the kernel command line to disable the output
> you don't want to be lit up.  See:
> https://wiki.archlinux.org/index.php/kernel_mode_setting
> for more info.  basically add video=TV-1:d to disable the output in
> question.  Replace TV-1 with whatever connector you want to disable.

I tried adding video=DVI-D-1:d to the kernel command line.

The effect is while the second output is indeed disabled, the
framebuffer console still takes the second output's resolution
into account and the boot splash is still using only the top-left
800x480 part of the 1024x768 primary screen.

Also, the secondary screen got disabled also in X which is not desired.
Can I wake it up under X somehow? This device is using the modesetting
DDX driver.

Thanks,
Zoltán

> 
> Alex
> 

[toc] | [prev] | [next] | [standalone]

#1623124

On Thu, Apr 13, 2017 at 11:36 AM, Alex Deucher <alexdeucher@gmail.com> wrote:
> On Thu, Apr 13, 2017 at 11:03 AM, Boszormenyi Zoltan <zboszor@pr.hu> wrote:
>> 2017-04-13 16:05 keltezéssel, Alex Deucher írta:
>>>
>>> On Thu, Apr 13, 2017 at 9:03 AM, Boszormenyi Zoltan <zboszor@pr.hu> wrote:
>>>>
>>>> Hi,
>>>>
>>>> how can I disable the behaviour in the KMS drivers
>>>> that enables all outputs at once?
>>>>
>>>> It is very annoying that on a POS machine with an
>>>> 1024x768 LVDS and a 800x480 secondary monitor (both built-in)
>>>> the KMS driver wakes up both. Then the framebuffer console
>>>> and plymouth use both screens, making the primary output
>>>> very odd with only the top-left part used by the boot splash.
>>>>
>>>> I would like the boot splash to be shown only on the primary
>>>> output at its full resolution instead of on all outputs using
>>>> the smallest common rectangle.
>>>>
>>>> Is there a kernel command line configuration that achieves this?
>>>>
>>>> The device in question uses the gma500 kernel driver but the same
>>>> behaviour is observed with the i915 and radeon drivers.
>>>>
>>>
>>> The problem is fbdev is not multi-head aware.  The fbdev emulation in
>>> the KMS drivers attempts to light up all monitors so that something
>>> shows up on all heads.  If you really want different per head
>>> configurations, you need to use the KMS API directly.  As a
>>> workaround, you can use the kernel command line to disable the output
>>> you don't want to be lit up.  See:
>>> https://wiki.archlinux.org/index.php/kernel_mode_setting
>>> for more info.  basically add video=TV-1:d to disable the output in
>>> question.  Replace TV-1 with whatever connector you want to disable.
>>
>>
>> I tried adding video=DVI-D-1:d to the kernel command line.
>>
>> The effect is while the second output is indeed disabled, the
>> framebuffer console still takes the second output's resolution
>> into account and the boot splash is still using only the top-left
>> 800x480 part of the 1024x768 primary screen.
>>
>> Also, the secondary screen got disabled also in X which is not desired.
>> Can I wake it up under X somehow? This device is using the modesetting
>> DDX driver.
>
> Can you enable it via randr?

I think the video= based disable forces the connector to be disabled
irrevocably.

  -ilia

[toc] | [prev] | [next] | [standalone]

#1623167

On Thu, Apr 13, 2017 at 11:37:45AM -0400, Ilia Mirkin wrote:
> On Thu, Apr 13, 2017 at 11:36 AM, Alex Deucher <alexdeucher@gmail.com> wrote:
> > On Thu, Apr 13, 2017 at 11:03 AM, Boszormenyi Zoltan <zboszor@pr.hu> wrote:
> >> 2017-04-13 16:05 keltezéssel, Alex Deucher írta:
> >>>
> >>> On Thu, Apr 13, 2017 at 9:03 AM, Boszormenyi Zoltan <zboszor@pr.hu> wrote:
> >>>>
> >>>> Hi,
> >>>>
> >>>> how can I disable the behaviour in the KMS drivers
> >>>> that enables all outputs at once?
> >>>>
> >>>> It is very annoying that on a POS machine with an
> >>>> 1024x768 LVDS and a 800x480 secondary monitor (both built-in)
> >>>> the KMS driver wakes up both. Then the framebuffer console
> >>>> and plymouth use both screens, making the primary output
> >>>> very odd with only the top-left part used by the boot splash.
> >>>>
> >>>> I would like the boot splash to be shown only on the primary
> >>>> output at its full resolution instead of on all outputs using
> >>>> the smallest common rectangle.
> >>>>
> >>>> Is there a kernel command line configuration that achieves this?
> >>>>
> >>>> The device in question uses the gma500 kernel driver but the same
> >>>> behaviour is observed with the i915 and radeon drivers.
> >>>>
> >>>
> >>> The problem is fbdev is not multi-head aware.  The fbdev emulation in
> >>> the KMS drivers attempts to light up all monitors so that something
> >>> shows up on all heads.  If you really want different per head
> >>> configurations, you need to use the KMS API directly.  As a
> >>> workaround, you can use the kernel command line to disable the output
> >>> you don't want to be lit up.  See:
> >>> https://wiki.archlinux.org/index.php/kernel_mode_setting
> >>> for more info.  basically add video=TV-1:d to disable the output in
> >>> question.  Replace TV-1 with whatever connector you want to disable.
> >>
> >>
> >> I tried adding video=DVI-D-1:d to the kernel command line.
> >>
> >> The effect is while the second output is indeed disabled, the
> >> framebuffer console still takes the second output's resolution
> >> into account and the boot splash is still using only the top-left
> >> 800x480 part of the 1024x768 primary screen.
> >>
> >> Also, the secondary screen got disabled also in X which is not desired.
> >> Can I wake it up under X somehow? This device is using the modesetting
> >> DDX driver.
> >
> > Can you enable it via randr?
> 
> I think the video= based disable forces the connector to be disabled
> irrevocably.

# echo detect > /sys/class/drm/<whatever>/status

-- 
Ville Syrjälä
Intel OTC

[toc] | [prev] | [next] | [standalone]

#1623216

2017-04-13 18:20 keltezéssel, Ville Syrjälä írta:
> On Thu, Apr 13, 2017 at 11:37:45AM -0400, Ilia Mirkin wrote:
>> On Thu, Apr 13, 2017 at 11:36 AM, Alex Deucher <alexdeucher@gmail.com> wrote:
>>> On Thu, Apr 13, 2017 at 11:03 AM, Boszormenyi Zoltan <zboszor@pr.hu> wrote:
>>>> 2017-04-13 16:05 keltezéssel, Alex Deucher írta:
>>>>>
>>>>> On Thu, Apr 13, 2017 at 9:03 AM, Boszormenyi Zoltan <zboszor@pr.hu> wrote:
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> how can I disable the behaviour in the KMS drivers
>>>>>> that enables all outputs at once?
>>>>>>
>>>>>> It is very annoying that on a POS machine with an
>>>>>> 1024x768 LVDS and a 800x480 secondary monitor (both built-in)
>>>>>> the KMS driver wakes up both. Then the framebuffer console
>>>>>> and plymouth use both screens, making the primary output
>>>>>> very odd with only the top-left part used by the boot splash.
>>>>>>
>>>>>> I would like the boot splash to be shown only on the primary
>>>>>> output at its full resolution instead of on all outputs using
>>>>>> the smallest common rectangle.
>>>>>>
>>>>>> Is there a kernel command line configuration that achieves this?
>>>>>>
>>>>>> The device in question uses the gma500 kernel driver but the same
>>>>>> behaviour is observed with the i915 and radeon drivers.
>>>>>>
>>>>>
>>>>> The problem is fbdev is not multi-head aware.  The fbdev emulation in
>>>>> the KMS drivers attempts to light up all monitors so that something
>>>>> shows up on all heads.  If you really want different per head
>>>>> configurations, you need to use the KMS API directly.  As a
>>>>> workaround, you can use the kernel command line to disable the output
>>>>> you don't want to be lit up.  See:
>>>>> https://wiki.archlinux.org/index.php/kernel_mode_setting
>>>>> for more info.  basically add video=TV-1:d to disable the output in
>>>>> question.  Replace TV-1 with whatever connector you want to disable.
>>>>
>>>>
>>>> I tried adding video=DVI-D-1:d to the kernel command line.
>>>>
>>>> The effect is while the second output is indeed disabled, the
>>>> framebuffer console still takes the second output's resolution
>>>> into account and the boot splash is still using only the top-left
>>>> 800x480 part of the 1024x768 primary screen.
>>>>
>>>> Also, the secondary screen got disabled also in X which is not desired.
>>>> Can I wake it up under X somehow? This device is using the modesetting
>>>> DDX driver.
>>>
>>> Can you enable it via randr?
>>
>> I think the video= based disable forces the connector to be disabled
>> irrevocably.
> 
> # echo detect > /sys/class/drm/<whatever>/status
> 

Thanks, that worked.

I had to regenerate my initramfs to actually include the gma500 driver
so KMS can kick in early. Before that the text mode plugin was used in
plymouth and that doesn't switch dimensions when fbdev took over.

The plymouth boot splash now looks good on the primary screen with
the secondary display disabled from the kernel command line and I can
enable the secondary screen from a boot script before X (a DM) starts
which causes both screens to flash but it's good for me now.

Thanks for everyone who answered.

[toc] | [prev] | [next] | [standalone]

#1623128

On Thu, Apr 13, 2017 at 11:03 AM, Boszormenyi Zoltan <zboszor@pr.hu> wrote:
> 2017-04-13 16:05 keltezéssel, Alex Deucher írta:
>>
>> On Thu, Apr 13, 2017 at 9:03 AM, Boszormenyi Zoltan <zboszor@pr.hu> wrote:
>>>
>>> Hi,
>>>
>>> how can I disable the behaviour in the KMS drivers
>>> that enables all outputs at once?
>>>
>>> It is very annoying that on a POS machine with an
>>> 1024x768 LVDS and a 800x480 secondary monitor (both built-in)
>>> the KMS driver wakes up both. Then the framebuffer console
>>> and plymouth use both screens, making the primary output
>>> very odd with only the top-left part used by the boot splash.
>>>
>>> I would like the boot splash to be shown only on the primary
>>> output at its full resolution instead of on all outputs using
>>> the smallest common rectangle.
>>>
>>> Is there a kernel command line configuration that achieves this?
>>>
>>> The device in question uses the gma500 kernel driver but the same
>>> behaviour is observed with the i915 and radeon drivers.
>>>
>>
>> The problem is fbdev is not multi-head aware.  The fbdev emulation in
>> the KMS drivers attempts to light up all monitors so that something
>> shows up on all heads.  If you really want different per head
>> configurations, you need to use the KMS API directly.  As a
>> workaround, you can use the kernel command line to disable the output
>> you don't want to be lit up.  See:
>> https://wiki.archlinux.org/index.php/kernel_mode_setting
>> for more info.  basically add video=TV-1:d to disable the output in
>> question.  Replace TV-1 with whatever connector you want to disable.
>
>
> I tried adding video=DVI-D-1:d to the kernel command line.
>
> The effect is while the second output is indeed disabled, the
> framebuffer console still takes the second output's resolution
> into account and the boot splash is still using only the top-left
> 800x480 part of the 1024x768 primary screen.
>
> Also, the secondary screen got disabled also in X which is not desired.
> Can I wake it up under X somehow? This device is using the modesetting
> DDX driver.

Can you enable it via randr?

Alex

[toc] | [prev] | [next] | [standalone]

#1623135

2017-04-13 17:36 keltezéssel, Alex Deucher írta:
> On Thu, Apr 13, 2017 at 11:03 AM, Boszormenyi Zoltan <zboszor@pr.hu> wrote:
>> 2017-04-13 16:05 keltezéssel, Alex Deucher írta:
>>>
>>> On Thu, Apr 13, 2017 at 9:03 AM, Boszormenyi Zoltan <zboszor@pr.hu> wrote:
>>>>
>>>> Hi,
>>>>
>>>> how can I disable the behaviour in the KMS drivers
>>>> that enables all outputs at once?
>>>>
>>>> It is very annoying that on a POS machine with an
>>>> 1024x768 LVDS and a 800x480 secondary monitor (both built-in)
>>>> the KMS driver wakes up both. Then the framebuffer console
>>>> and plymouth use both screens, making the primary output
>>>> very odd with only the top-left part used by the boot splash.
>>>>
>>>> I would like the boot splash to be shown only on the primary
>>>> output at its full resolution instead of on all outputs using
>>>> the smallest common rectangle.
>>>>
>>>> Is there a kernel command line configuration that achieves this?
>>>>
>>>> The device in question uses the gma500 kernel driver but the same
>>>> behaviour is observed with the i915 and radeon drivers.
>>>>
>>>
>>> The problem is fbdev is not multi-head aware.  The fbdev emulation in
>>> the KMS drivers attempts to light up all monitors so that something
>>> shows up on all heads.  If you really want different per head
>>> configurations, you need to use the KMS API directly.  As a
>>> workaround, you can use the kernel command line to disable the output
>>> you don't want to be lit up.  See:
>>> https://wiki.archlinux.org/index.php/kernel_mode_setting
>>> for more info.  basically add video=TV-1:d to disable the output in
>>> question.  Replace TV-1 with whatever connector you want to disable.
>>
>>
>> I tried adding video=DVI-D-1:d to the kernel command line.
>>
>> The effect is while the second output is indeed disabled, the
>> framebuffer console still takes the second output's resolution
>> into account and the boot splash is still using only the top-left
>> 800x480 part of the 1024x768 primary screen.
>>
>> Also, the secondary screen got disabled also in X which is not desired.
>> Can I wake it up under X somehow? This device is using the modesetting
>> DDX driver.
> 
> Can you enable it via randr?

No, "xrandr --output DVI-D-1 --auto" does nothing.

> 
> Alex
> 

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web