Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1614162 > unrolled thread

[PATCH v3 0/4] tty/serial: meson_uart: add support for core clock handling

Back to article view | Back to linux.kernel

Contents

  [PATCH v3 0/4] tty/serial: meson_uart: add support for core clock handling Helmut Klein <hgkr.klein@gmail.com> - 2017-03-31 19:00 +0200
    Re: [PATCH v3 0/4] tty/serial: meson_uart: add support for core clock handling Kevin Hilman <khilman@baylibre.com> - 2017-04-03 17:50 +0200

#1614162 — [PATCH v3 0/4] tty/serial: meson_uart: add support for core clock handling

To be able to use the three none AO uarts of the meson gx SoCs (uart_A,
uart_B & uart_C), the core clock has to be enabled (see chapter 22.3 of
the public s905 data sheet).
At least the u-boot of my s905 based media player (netxeon minimx-g)
doesn't do this. so the driver must enable the clock.

This patch set does:
- exposes the UART clock ids to the dtb
- adds documentation for the dt-bindings of meson_uart
- adds the core clock handling to the driver
- adds the core clock handling to meson-gxbb.dtsi and meson-gxl.dtsi

The patchset is based on the branch "master" of the repository in [1]

Changes since v2
- mail subjects reworked
- add clocks/clock-names to the documentation
- add core clock handling to meson-gxbb.dtsi & meson-gxl.dtsi

Changes since v1
- use git to produce the patch set
- added the clock ids for uart_B and uart_C

[1] git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git

Helmut Klein (4):
  clk: meson: gxbb: expose CLKID_UARTx
  dt-bindings: meson_uart: add documentation for meson UARTs
  tty/serial: meson_uart: add the core clock handling to the driver
  ARM64: dts: meson-gx: add core clock support for uart_A, uart_B and
    uart_C

 .../bindings/serial/amlogic,meson_uart.txt         | 30 ++++++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        | 15 +++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi         | 15 +++++++++++
 drivers/clk/meson/gxbb.h                           |  6 ++---
 drivers/tty/serial/meson_uart.c                    | 10 ++++++++
 include/dt-bindings/clock/gxbb-clkc.h              |  3 +++
 6 files changed, 76 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson_uart.txt

--
2.11.0

[toc] | [next] | [standalone]

#1615347

Helmut Klein <hgkr.klein@gmail.com> writes:

> To be able to use the three none AO uarts of the meson gx SoCs (uart_A,

s/none/non/

> uart_B & uart_C), the core clock has to be enabled (see chapter 22.3 of
> the public s905 data sheet).
> At least the u-boot of my s905 based media player (netxeon minimx-g)
> doesn't do this. so the driver must enable the clock.

FYI: even if a booloader enablesq clocks, it's important that the kernel
enable clocks that it uses so the kernel can be independent of any
bootloader.

> This patch set does:
> - exposes the UART clock ids to the dtb
> - adds documentation for the dt-bindings of meson_uart
> - adds the core clock handling to the driver
> - adds the core clock handling to meson-gxbb.dtsi and meson-gxl.dtsi
>
> The patchset is based on the branch "master" of the repository in [1]

The master branch in my tree just tracks mainline master branch.

To avoid conflicts with other on-going DT changes, the DT patches should
probably be based on top of my v4.12/dt64 branch.

Kevin

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web