Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1611061 > unrolled thread
| Started by | Steve Twiss <stwiss.opensource@diasemi.com> |
|---|---|
| First post | 2017-03-28 17:10 +0200 |
| Last post | 2017-04-03 15:40 +0200 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH V7 3/7] Documentation: devicetree: mfd: da9062/61 MFD binding Steve Twiss <stwiss.opensource@diasemi.com> - 2017-03-28 17:10 +0200
Re: [PATCH V7 3/7] Documentation: devicetree: mfd: da9062/61 MFD binding Lee Jones <lee.jones@linaro.org> - 2017-04-03 15:40 +0200
| From | Steve Twiss <stwiss.opensource@diasemi.com> |
|---|---|
| Date | 2017-03-28 17:10 +0200 |
| Subject | [PATCH V7 3/7] Documentation: devicetree: mfd: da9062/61 MFD binding |
| Message-ID | <tq0UW-12M-25@gated-at.bofh.it> |
From: Steve Twiss <stwiss.opensource@diasemi.com>
Extend existing DA9062 binding information to include the DA9061 PMIC for
MFD core and regulators.
Add a da9062-onkey link to the existing onkey binding file.
Add a da9062-thermal link to the new temperature monitoring binding file.
Delete the da9062-watchdog section and replace it with a link to the new
DA9061/62 binding information file.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
---
This patch applies against linux-next and v4.11-rc3
v6 -> v7
- NO CODE CHANGE
v5 -> v6
- NO CODE CHANGE
- Rebased from v4.9 to v4.11-rc3
v4 -> v5
- NO CODE CHANGE
- Rebased from v4.8 to v4.9
v3 -> v4
- Patch renamed from [PATCH V3 4/9] to [PATCH V4 3/8]
- Remove double newline spacing in text file
- Added Acked-by Rob Herring
v2 -> v3
- Patch renamed from [PATCH V2 04/10] to [PATCH V3 4/9]
- Ensure binding description concentrates on the device not the
device driver
- Separate the DA9061 and DA9062 sub-device tables to distinguish
the difference between the two devices
- Update the commit message to describe this change
- Add e-mail information about associated patches from this set
without describing them as being explicitly dependent on this
binding
v1 -> v2
- Patch renamed from [PATCH V1 09/10] to [PATCH V2 04/10] -- these
changes were made to fix checkpatch warnings caused by the patch
set dependency order
Hi,
Added an Ack from Rob Herring for the PATCH V3 version.
As previously:
Other information:
The device driver from this patch set (associated with this binding) is
- [PATCH V5 4/8] mfd: da9061: MFD core support
and also the following binding file changes:
- Binding for onkey (already applied by Dmitry Torokhov)
- [PATCH V5 1/8] Binding for watchdog
- [PATCH V5 2/8] Binding for thermal
Regards,
Steve Twiss, Dialog Semiconductor
Documentation/devicetree/bindings/mfd/da9062.txt | 49 +++++++++++++++++-------
1 file changed, 36 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
index 38802b5..c0a418c 100644
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt
@@ -1,22 +1,39 @@
* Dialog DA9062 Power Management Integrated Circuit (PMIC)
-DA9062 consists of a large and varied group of sub-devices:
+Product information for the DA9062 and DA9061 devices can be found here:
+- http://www.dialog-semiconductor.com/products/da9062
+- http://www.dialog-semiconductor.com/products/da9061
+
+The DA9062 PMIC consists of:
Device Supply Names Description
------ ------------ -----------
da9062-regulator : : LDOs & BUCKs
da9062-rtc : : Real-Time Clock
+da9062-onkey : : On Key
+da9062-watchdog : : Watchdog Timer
+da9062-thermal : : Thermal
+
+The DA9061 PMIC consists of:
+
+Device Supply Names Description
+------ ------------ -----------
+da9062-regulator : : LDOs & BUCKs
+da9062-onkey : : On Key
da9062-watchdog : : Watchdog Timer
+da9062-thermal : : Thermal
======
Required properties:
-- compatible : Should be "dlg,da9062".
+- compatible : Should be
+ "dlg,da9062" for DA9062
+ "dlg,da9061" for DA9061
- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
modified to match the chip's OTP settings).
- interrupt-parent : Specifies the reference to the interrupt controller for
- the DA9062.
+ the DA9062 or DA9061.
- interrupts : IRQ line information.
- interrupt-controller
@@ -25,8 +42,8 @@ further information on IRQ bindings.
Sub-nodes:
-- regulators : This node defines the settings for the LDOs and BUCKs. The
- DA9062 regulators are bound using their names listed below:
+- regulators : This node defines the settings for the LDOs and BUCKs.
+ The DA9062 regulators are bound using their names listed below:
buck1 : BUCK_1
buck2 : BUCK_2
@@ -37,19 +54,29 @@ Sub-nodes:
ldo3 : LDO_3
ldo4 : LDO_4
+ The DA9061 regulators are bound using their names listed below:
+
+ buck1 : BUCK_1
+ buck2 : BUCK_2
+ buck3 : BUCK_3
+ ldo1 : LDO_1
+ ldo2 : LDO_2
+ ldo3 : LDO_3
+ ldo4 : LDO_4
+
The component follows the standard regulator framework and the bindings
details of individual regulator device can be found in:
Documentation/devicetree/bindings/regulator/regulator.txt
-
- rtc : This node defines settings required for the Real-Time Clock associated
with the DA9062. There are currently no entries in this binding, however
compatible = "dlg,da9062-rtc" should be added if a node is created.
-- watchdog: This node defines the settings for the watchdog driver associated
- with the DA9062 PMIC. The compatible = "dlg,da9062-watchdog" should be added
- if a node is created.
+- onkey : See ../input/da9062-onkey.txt
+
+- watchdog: See ../watchdog/da9062-watchdog.txt
+- thermal : See ../thermal/da9062-thermal.txt
Example:
@@ -64,10 +91,6 @@ Example:
compatible = "dlg,da9062-rtc";
};
- watchdog {
- compatible = "dlg,da9062-watchdog";
- };
-
regulators {
DA9062_BUCK1: buck1 {
regulator-name = "BUCK1";
--
end-of-patch for PATCH V7
[toc] | [next] | [standalone]
| From | Lee Jones <lee.jones@linaro.org> |
|---|---|
| Date | 2017-04-03 15:40 +0200 |
| Subject | Re: [PATCH V7 3/7] Documentation: devicetree: mfd: da9062/61 MFD binding |
| Message-ID | <tsan7-7sN-5@gated-at.bofh.it> |
| In reply to | #1611061 |
On Tue, 28 Mar 2017, Steve Twiss wrote:
> From: Steve Twiss <stwiss.opensource@diasemi.com>
>
> Extend existing DA9062 binding information to include the DA9061 PMIC for
> MFD core and regulators.
>
> Add a da9062-onkey link to the existing onkey binding file.
>
> Add a da9062-thermal link to the new temperature monitoring binding file.
>
> Delete the da9062-watchdog section and replace it with a link to the new
> DA9061/62 binding information file.
>
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
>
> ---
> This patch applies against linux-next and v4.11-rc3
>
> v6 -> v7
> - NO CODE CHANGE
>
> v5 -> v6
> - NO CODE CHANGE
> - Rebased from v4.9 to v4.11-rc3
>
> v4 -> v5
> - NO CODE CHANGE
> - Rebased from v4.8 to v4.9
>
> v3 -> v4
> - Patch renamed from [PATCH V3 4/9] to [PATCH V4 3/8]
> - Remove double newline spacing in text file
> - Added Acked-by Rob Herring
>
> v2 -> v3
> - Patch renamed from [PATCH V2 04/10] to [PATCH V3 4/9]
> - Ensure binding description concentrates on the device not the
> device driver
> - Separate the DA9061 and DA9062 sub-device tables to distinguish
> the difference between the two devices
> - Update the commit message to describe this change
> - Add e-mail information about associated patches from this set
> without describing them as being explicitly dependent on this
> binding
>
> v1 -> v2
> - Patch renamed from [PATCH V1 09/10] to [PATCH V2 04/10] -- these
> changes were made to fix checkpatch warnings caused by the patch
> set dependency order
>
> Hi,
>
> Added an Ack from Rob Herring for the PATCH V3 version.
>
> As previously:
> Other information:
> The device driver from this patch set (associated with this binding) is
>
> - [PATCH V5 4/8] mfd: da9061: MFD core support
>
> and also the following binding file changes:
>
> - Binding for onkey (already applied by Dmitry Torokhov)
> - [PATCH V5 1/8] Binding for watchdog
> - [PATCH V5 2/8] Binding for thermal
>
> Regards,
> Steve Twiss, Dialog Semiconductor
>
>
> Documentation/devicetree/bindings/mfd/da9062.txt | 49 +++++++++++++++++-------
> 1 file changed, 36 insertions(+), 13 deletions(-)
Applied, thanks.
> diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
> index 38802b5..c0a418c 100644
> --- a/Documentation/devicetree/bindings/mfd/da9062.txt
> +++ b/Documentation/devicetree/bindings/mfd/da9062.txt
> @@ -1,22 +1,39 @@
> * Dialog DA9062 Power Management Integrated Circuit (PMIC)
>
> -DA9062 consists of a large and varied group of sub-devices:
> +Product information for the DA9062 and DA9061 devices can be found here:
> +- http://www.dialog-semiconductor.com/products/da9062
> +- http://www.dialog-semiconductor.com/products/da9061
> +
> +The DA9062 PMIC consists of:
>
> Device Supply Names Description
> ------ ------------ -----------
> da9062-regulator : : LDOs & BUCKs
> da9062-rtc : : Real-Time Clock
> +da9062-onkey : : On Key
> +da9062-watchdog : : Watchdog Timer
> +da9062-thermal : : Thermal
> +
> +The DA9061 PMIC consists of:
> +
> +Device Supply Names Description
> +------ ------------ -----------
> +da9062-regulator : : LDOs & BUCKs
> +da9062-onkey : : On Key
> da9062-watchdog : : Watchdog Timer
> +da9062-thermal : : Thermal
>
> ======
>
> Required properties:
>
> -- compatible : Should be "dlg,da9062".
> +- compatible : Should be
> + "dlg,da9062" for DA9062
> + "dlg,da9061" for DA9061
> - reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
> modified to match the chip's OTP settings).
> - interrupt-parent : Specifies the reference to the interrupt controller for
> - the DA9062.
> + the DA9062 or DA9061.
> - interrupts : IRQ line information.
> - interrupt-controller
>
> @@ -25,8 +42,8 @@ further information on IRQ bindings.
>
> Sub-nodes:
>
> -- regulators : This node defines the settings for the LDOs and BUCKs. The
> - DA9062 regulators are bound using their names listed below:
> +- regulators : This node defines the settings for the LDOs and BUCKs.
> + The DA9062 regulators are bound using their names listed below:
>
> buck1 : BUCK_1
> buck2 : BUCK_2
> @@ -37,19 +54,29 @@ Sub-nodes:
> ldo3 : LDO_3
> ldo4 : LDO_4
>
> + The DA9061 regulators are bound using their names listed below:
> +
> + buck1 : BUCK_1
> + buck2 : BUCK_2
> + buck3 : BUCK_3
> + ldo1 : LDO_1
> + ldo2 : LDO_2
> + ldo3 : LDO_3
> + ldo4 : LDO_4
> +
> The component follows the standard regulator framework and the bindings
> details of individual regulator device can be found in:
> Documentation/devicetree/bindings/regulator/regulator.txt
>
> -
> - rtc : This node defines settings required for the Real-Time Clock associated
> with the DA9062. There are currently no entries in this binding, however
> compatible = "dlg,da9062-rtc" should be added if a node is created.
>
> -- watchdog: This node defines the settings for the watchdog driver associated
> - with the DA9062 PMIC. The compatible = "dlg,da9062-watchdog" should be added
> - if a node is created.
> +- onkey : See ../input/da9062-onkey.txt
> +
> +- watchdog: See ../watchdog/da9062-watchdog.txt
>
> +- thermal : See ../thermal/da9062-thermal.txt
>
> Example:
>
> @@ -64,10 +91,6 @@ Example:
> compatible = "dlg,da9062-rtc";
> };
>
> - watchdog {
> - compatible = "dlg,da9062-watchdog";
> - };
> -
> regulators {
> DA9062_BUCK1: buck1 {
> regulator-name = "BUCK1";
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web