Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1616035 > unrolled thread
| Started by | Laxman Dewangan <ldewangan@nvidia.com> |
|---|---|
| First post | 2017-04-04 15:50 +0200 |
| Last post | 2017-04-05 19:40 +0200 |
| Articles | 3 — 2 participants |
Back to article view | Back to linux.kernel
[PATCH V4 1/2] regulator: DT: Add settling time property for non-linear voltage change Laxman Dewangan <ldewangan@nvidia.com> - 2017-04-04 15:50 +0200
[PATCH V4 2/2] regulator: Add settling time for non-linear voltage transition Laxman Dewangan <ldewangan@nvidia.com> - 2017-04-04 15:50 +0200
Applied "regulator: Add settling time for non-linear voltage transition" to the regulator tree Mark Brown <broonie@kernel.org> - 2017-04-05 19:40 +0200
| From | Laxman Dewangan <ldewangan@nvidia.com> |
|---|---|
| Date | 2017-04-04 15:50 +0200 |
| Subject | [PATCH V4 1/2] regulator: DT: Add settling time property for non-linear voltage change |
| Message-ID | <tsx0l-5yd-1@gated-at.bofh.it> |
Some regulators (some PWM regulators) have the voltage transition exponentially. On such cases, the settling time for voltage change is treated as constant time. Add DT property for providing the settling time for any level of voltage change for non-linear voltage change. signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> --- This patch is continuation of discussion on patch regulator: pwm: Fix regulator ramp delay for continuous mode https://patchwork.kernel.org/patch/9216857/ where is it discussed to have separate property for PWM which has exponential voltage transition. Changes from V1: - Pass the flag to tell that voltage ramp is exponential instead of providing delay. Changes from V2: - Based on review comment from V1, make the settling time property independent of the regulator-ramp-delay and move this out of PWM regulator. Changes from V3: - The change was sent long back and resuming this patch. - Added Rob's ack from V3 and content is same as V3. https://lkml.org/lkml/2016/11/30/632 - Rebase on linux-next tag 20170330 for resend. --- Documentation/devicetree/bindings/regulator/regulator.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 6ab5aef..d18edb0 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -21,6 +21,9 @@ Optional properties: design requires. This property describes the total system ramp time required due to the combination of internal ramping of the regulator itself, and board design issues such as trace capacitance and load on the supply. +- regulator-settling-time-us: Settling time, in microseconds, for voltage + change if regulator have the constant time for any level voltage change. + This is useful when regulator have exponential voltage change. - regulator-soft-start: Enable soft start so that voltage ramps slowly - regulator-state-mem sub-root node for Suspend-to-RAM mode : suspend to memory, the device goes to sleep, but all data stored in memory, -- 2.1.4
[toc] | [next] | [standalone]
| From | Laxman Dewangan <ldewangan@nvidia.com> |
|---|---|
| Date | 2017-04-04 15:50 +0200 |
| Subject | [PATCH V4 2/2] regulator: Add settling time for non-linear voltage transition |
| Message-ID | <tsx0m-5yd-21@gated-at.bofh.it> |
| In reply to | #1616035 |
Some regulators (some PWM regulators) have the voltage transition
non-linear i.e. exponentially. On such cases, the settling time
for voltage transition can not be presented in the voltage-ramp-delay.
Add new property for non-linear voltage transition and handle this
in getting the voltage settling time.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
This patch is continuation of discussion on patch
regulator: pwm: Fix regulator ramp delay for continuous mode
https://patchwork.kernel.org/patch/9216857/
where is it discussed to have separate property for PWM which has
exponential voltage transition.
Changes from V1:
- Use new DT property to finding that voltage ramp is exponential or
not and use flag for having fixed delay for all voltage change.
Changes from V2:
- Based on review comment from V1, make the settling time property
independent of the regulator-ramp-delay and move this to core
framework instead of handling in PWM regulator.
Changes from V3:
- The change was sent long back and resuming this patch.
- Rebase on linux-next tag 20170330 for resend.
---
drivers/regulator/core.c | 2 ++
drivers/regulator/of_regulator.c | 4 ++++
include/linux/regulator/machine.h | 3 +++
3 files changed, 9 insertions(+)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 0753635..7303454 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2773,6 +2773,8 @@ static int _regulator_set_voltage_time(struct regulator_dev *rdev,
ramp_delay = rdev->constraints->ramp_delay;
else if (rdev->desc->ramp_delay)
ramp_delay = rdev->desc->ramp_delay;
+ else if (rdev->constraints->settling_time)
+ return rdev->constraints->settling_time;
if (ramp_delay == 0) {
rdev_dbg(rdev, "ramp_delay not set\n");
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 4f613ec..09d677d 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -86,6 +86,10 @@ static void of_get_regulation_constraints(struct device_node *np,
constraints->ramp_disable = true;
}
+ ret = of_property_read_u32(np, "regulator-settling-time-us", &pval);
+ if (!ret)
+ constraints->settling_time = pval;
+
ret = of_property_read_u32(np, "regulator-enable-ramp-delay", &pval);
if (!ret)
constraints->enable_time = pval;
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index c9f795e..117699d 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -108,6 +108,8 @@ struct regulator_state {
* @initial_state: Suspend state to set by default.
* @initial_mode: Mode to set at startup.
* @ramp_delay: Time to settle down after voltage change (unit: uV/us)
+ * @settling_time: Time to settle down after voltage change when voltage
+ * change is non-linear (unit: microseconds).
* @active_discharge: Enable/disable active discharge. The enum
* regulator_active_discharge values are used for
* initialisation.
@@ -149,6 +151,7 @@ struct regulation_constraints {
unsigned int initial_mode;
unsigned int ramp_delay;
+ unsigned int settling_time;
unsigned int enable_time;
unsigned int active_discharge;
--
2.1.4
[toc] | [prev] | [next] | [standalone]
| From | Mark Brown <broonie@kernel.org> |
|---|---|
| Date | 2017-04-05 19:40 +0200 |
| Subject | Applied "regulator: Add settling time for non-linear voltage transition" to the regulator tree |
| Message-ID | <tsX4u-5CF-31@gated-at.bofh.it> |
| In reply to | #1616042 |
The patch
regulator: Add settling time for non-linear voltage transition
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From d6c1dc3f52e3a65f35c58433ba57d14c0bad902f Mon Sep 17 00:00:00 2001
From: Laxman Dewangan <ldewangan@nvidia.com>
Date: Tue, 4 Apr 2017 18:59:50 +0530
Subject: [PATCH] regulator: Add settling time for non-linear voltage
transition
Some regulators (some PWM regulators) have the voltage transition
non-linear i.e. exponentially. On such cases, the settling time
for voltage transition can not be presented in the voltage-ramp-delay.
Add new property for non-linear voltage transition and handle this
in getting the voltage settling time.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/core.c | 2 ++
drivers/regulator/of_regulator.c | 4 ++++
include/linux/regulator/machine.h | 3 +++
3 files changed, 9 insertions(+)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 04baac9a165b..3a641d64f8e1 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2753,6 +2753,8 @@ static int _regulator_set_voltage_time(struct regulator_dev *rdev,
ramp_delay = rdev->constraints->ramp_delay;
else if (rdev->desc->ramp_delay)
ramp_delay = rdev->desc->ramp_delay;
+ else if (rdev->constraints->settling_time)
+ return rdev->constraints->settling_time;
if (ramp_delay == 0) {
rdev_dbg(rdev, "ramp_delay not set\n");
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 4f613ec99500..09d677d5d3f0 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -86,6 +86,10 @@ static void of_get_regulation_constraints(struct device_node *np,
constraints->ramp_disable = true;
}
+ ret = of_property_read_u32(np, "regulator-settling-time-us", &pval);
+ if (!ret)
+ constraints->settling_time = pval;
+
ret = of_property_read_u32(np, "regulator-enable-ramp-delay", &pval);
if (!ret)
constraints->enable_time = pval;
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index ad3e5158e586..598a493b3927 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -108,6 +108,8 @@ struct regulator_state {
* @initial_state: Suspend state to set by default.
* @initial_mode: Mode to set at startup.
* @ramp_delay: Time to settle down after voltage change (unit: uV/us)
+ * @settling_time: Time to settle down after voltage change when voltage
+ * change is non-linear (unit: microseconds).
* @active_discharge: Enable/disable active discharge. The enum
* regulator_active_discharge values are used for
* initialisation.
@@ -149,6 +151,7 @@ struct regulation_constraints {
unsigned int initial_mode;
unsigned int ramp_delay;
+ unsigned int settling_time;
unsigned int enable_time;
unsigned int active_discharge;
--
2.11.0
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web