Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1615018 > unrolled thread

[PATCH v3 13/20] ARM: dts: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v3 13/20] ARM: dts: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high Corentin Labbe <clabbe.montjoie@gmail.com> - 2017-04-03 11:30 +0200

#1615018 — [PATCH v3 13/20] ARM: dts: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high

On the Orange Pi PC Plus, the polarity of the LEDs on the RJ45 Ethernet
port were changed from active low to active high.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
---
 arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
index 8b93f5c..0380769 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -86,3 +86,8 @@
 	/* eMMC is missing pull-ups */
 	bias-pull-up;
 };
+
+&emac {
+	/* LEDs changed to active high on the plus */
+	/delete-property/ allwinner,leds-active-low;
+};
-- 
2.10.2

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web