Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1614246 > unrolled thread

[PATCH] sata_via: Enable hotplug only on VT6421

Back to article view | Back to linux.kernel

Contents

  [PATCH] sata_via: Enable hotplug only on VT6421 Ondrej Zary <linux@rainbow-software.org> - 2017-03-31 20:50 +0200
    [RFC PATCH] sata_via: Enable hotplug on VT6420 Ondrej Zary <linux@rainbow-software.org> - 2017-03-31 21:20 +0200

#1614246 — [PATCH] sata_via: Enable hotplug only on VT6421

Commit 57e5568fda27 ("sata_via: Implement hotplug for VT6421") adds
hotplug IRQ handler for VT6421 but enables hotplug on all chips. This
is a bug because it causes "irq xx: nobody cared" error on VT6420 when
hot-(un)plugging a drive:

[  381.839948] irq 20: nobody cared (try booting with the "irqpoll" option)
[  381.840014] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc5+ #148
[  381.840066] Hardware name:          P4VM800/P4VM800, BIOS P1.60 05/29/2006
[  381.840117] Call Trace:
[  381.840167]  <IRQ>
[  381.840225]  ? dump_stack+0x44/0x58
[  381.840278]  ? __report_bad_irq+0x14/0x97
[  381.840327]  ? handle_edge_irq+0xa5/0xa5
[  381.840376]  ? note_interrupt+0x155/0x1cf
[  381.840426]  ? handle_edge_irq+0xa5/0xa5
[  381.840474]  ? handle_irq_event_percpu+0x32/0x38
[  381.840524]  ? handle_irq_event+0x1f/0x38
[  381.840573]  ? handle_fasteoi_irq+0x69/0xb8
[  381.840625]  ? handle_irq+0x4f/0x5d
[  381.840672]  </IRQ>
[  381.840726]  ? do_IRQ+0x2e/0x8b
[  381.840782]  ? common_interrupt+0x2c/0x34
[  381.840836]  ? mwait_idle+0x60/0x82
[  381.840892]  ? arch_cpu_idle+0x6/0x7
[  381.840949]  ? do_idle+0x96/0x18e
[  381.841002]  ? cpu_startup_entry+0x16/0x1a
[  381.841057]  ? start_kernel+0x319/0x31c
[  381.841111]  ? startup_32_smp+0x166/0x168
[  381.841165] handlers:
[  381.841219] [<c12a7263>] ata_bmdma_interrupt
[  381.841274] Disabling IRQ #20

Seems that VT6420 can do hotplug too (there's no documentation) but the
comments say that SCR register access (required for detecting hotplug
events) can cause problems on these chips.

For now, just keep hotplug disabled on anything other than VT6421.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
---
 drivers/ata/sata_via.c |   18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 0636d84..f3f538e 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -644,14 +644,16 @@ static void svia_configure(struct pci_dev *pdev, int board_id,
 		pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
 	}
 
-	/* enable IRQ on hotplug */
-	pci_read_config_byte(pdev, SVIA_MISC_3, &tmp8);
-	if ((tmp8 & SATA_HOTPLUG) != SATA_HOTPLUG) {
-		dev_dbg(&pdev->dev,
-			"enabling SATA hotplug (0x%x)\n",
-			(int) tmp8);
-		tmp8 |= SATA_HOTPLUG;
-		pci_write_config_byte(pdev, SVIA_MISC_3, tmp8);
+	if (board_id == vt6421) {
+		/* enable IRQ on hotplug */
+		pci_read_config_byte(pdev, SVIA_MISC_3, &tmp8);
+		if ((tmp8 & SATA_HOTPLUG) != SATA_HOTPLUG) {
+			dev_dbg(&pdev->dev,
+				"enabling SATA hotplug (0x%x)\n",
+				(int) tmp8);
+			tmp8 |= SATA_HOTPLUG;
+			pci_write_config_byte(pdev, SVIA_MISC_3, tmp8);
+		}
 	}
 
 	/*
-- 
Ondrej Zary

[toc] | [next] | [standalone]

#1614265 — [RFC PATCH] sata_via: Enable hotplug on VT6420

VT6420 seems to have the same hotplug capability as VT6421.

However, enabling hotplug needs to expose SCR registers which can cause
problems. It works for me but might break elsewhere.

---
 drivers/ata/sata_via.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index f3f538e..fafb0d3 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -132,6 +132,8 @@ struct svia_priv {
 
 static struct ata_port_operations vt6420_sata_ops = {
 	.inherits		= &svia_base_ops,
+	.scr_read		= svia_scr_read,
+	.scr_write		= svia_scr_write,
 	.freeze			= svia_noop_freeze,
 	.prereset		= vt6420_prereset,
 	.bmdma_start		= vt6420_bmdma_start,
@@ -556,7 +558,7 @@ static void svia_wd_fix(struct pci_dev *pdev)
 	pci_write_config_byte(pdev, 0x52, tmp8 | BIT(2));
 }
 
-static irqreturn_t vt6421_interrupt(int irq, void *dev_instance)
+static irqreturn_t vt642x_interrupt(int irq, void *dev_instance)
 {
 	struct ata_host *host = dev_instance;
 	irqreturn_t rc = ata_bmdma_interrupt(irq, dev_instance);
@@ -644,7 +646,7 @@ static void svia_configure(struct pci_dev *pdev, int board_id,
 		pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
 	}
 
-	if (board_id == vt6421) {
+	if (board_id == vt6420 || board_id == vt6421) {
 		/* enable IRQ on hotplug */
 		pci_read_config_byte(pdev, SVIA_MISC_3, &tmp8);
 		if ((tmp8 & SATA_HOTPLUG) != SATA_HOTPLUG) {
@@ -744,8 +746,8 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	svia_configure(pdev, board_id, hpriv);
 
 	pci_set_master(pdev);
-	if (board_id == vt6421)
-		return ata_host_activate(host, pdev->irq, vt6421_interrupt,
+	if (board_id == vt6420 || board_id == vt6421)
+		return ata_host_activate(host, pdev->irq, vt642x_interrupt,
 					 IRQF_SHARED, &svia_sht);
 	else
 		return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
-- 
Ondrej Zary

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web