Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1610576 > unrolled thread

[PATCH v3 0/7] Platform driver support for 'amd5536udc' driver

Back to article view | Back to linux.kernel

Contents

  [PATCH v3 0/7] Platform driver support for 'amd5536udc' driver Raviteja Garimella <raviteja.garimella@broadcom.com> - 2017-03-28 13:10 +0200
    [PATCH v3 4/7] UDC: Provide correct arguments for 'dma_pool_create' Raviteja Garimella <raviteja.garimella@broadcom.com> - 2017-03-28 13:10 +0200
    [PATCH v3 7/7] UDC: Add Synopsys UDC Platform driver Raviteja Garimella <raviteja.garimella@broadcom.com> - 2017-03-28 13:10 +0200
    Re: [PATCH v3 2/7] UDC: Rename amd5536udc driver file based on IP Felipe Balbi <balbi@kernel.org> - 2017-03-31 12:00 +0200
      Re: [PATCH v3 2/7] UDC: Rename amd5536udc driver file based on IP Raviteja Garimella <raviteja.garimella@broadcom.com> - 2017-03-31 15:20 +0200

#1610576 — [PATCH v3 0/7] Platform driver support for 'amd5536udc' driver

Changes in PATCH v3:
===================
1. Updated bindings documentation and platform driver to add
   "brcm,iproc-udc" compatibility string.

2. Added a patch to replace references of struct pci_pool with
   struct dma_pool so that it is compatibile with non-pci drivers.

Changes in PATCH v2:
===================
1. Updated bindings documentation:
   -- compatibility string for each supported SoC
   -- removed extcon node
   -- rename the file name to just iproc-udc.txt

2. Modified comptability strings in platform driver file
   to reflect the change made in 1.

3 Kconfig
   -- Resolved warnings shown by kbuild-test-robot  

The changes are being submitted as PATCH this time. Below are the
details of main changes with respect to previous RFC versions.

Changes in PATCH v1:
===================
Patch 1/6 now splits the driver into amd5536udc_pci_.c (which
contains only the PCI device registration part), and amd5536udc.c
will still be driver that does the rest of UDC driver functionality.

Patch 2/6 renames amd5536udc.c to snps_udc_core.c.

The DT compatibilty string is changed to "brcm,iproc-snps-udc"
as per review comments for RFCv2. The driver and bindings
documentation is modified to reflect this.

This is RFC for the changes made as per the review comments made for
the previous version. I would like to know  if this approach (the way
the driver is split and the naming and all)looks good to be submitted.


Changes in RFC v2:
=================
1. Split the driver into platform/pci specific drivers with a core driver
   file that handles the common driver routines that are exported.

2. Split the driver into number of patches as suggested in previous
   review comments.

3. Added the devicetree bindings documentation for Synopsys platform
   driver.

Introduction (RFC v1):
=====================
This patch adds platform device support to the existing 'amd5536udc'
driver.

The UDC is based on Synopsys Designware core USB (2.0) Device controller
IP.

The driver so far supports UDCs that are a part of AMD southbridge
and is connected through PCI bus.

The same driver can be used with UDCs that are integrated into SoCs
like Broadcom's Northstar2/Cygnus platforms by adding platform device
suooprt.

This patch contains all the changes that were required to get the driver
functional on Broadcom's Northstar2 platform. 

This is a request for comments from maintainers/others regarding approach
on whether to have 2 different drivers (one each for AMD and Broadcom)
with a common library (3 files in total), or have a single driver like
it's done in this patch and have the driver filename changed to some
common name based on ther underlying IP, like snps_udc.c.

Below are the main changes done:

1. Added OF based platform device registration -- so that the driver gets
   probed based on the device tree entry. Like wise, remove routine and
   platform PM ops are supported.

2. Modified debug prints to be compatible with both pci and platform
   devices.

3. Added members to 'struct udc' in header file for extcon and phy support.
   This is required if the UDC is connected to a Dual Role Device Phy
   where the Phy can be configured to be in Device mode or Host mode based
   on the type of external cable that is connected to the port.
 
4. Added checks in udc connect/disconnect routines so as to return if the
   routine is already called.

5. Modified the arguments passed to dma_pool_create routine -- which
   expects struct device, whereas NULL is passed in the existing version.
 
6. Kconfig changes are done so that the driver now depends on either of
   CONFIG_OF or CONFIG_PCI. More description about the Synopsys IP is
   provided.

Repo: https://github.com/Broadcom/arm64-linux.git
Branch: udc_snps_v3

Raviteja Garimella (7):
  UDC: Split the driver into amd (pci) and Synopsys core IP driver
  UDC: Rename amd5536udc driver file based on IP
  UDC: make debug prints compatible with both pci and platform devices
  UDC: Provide correct arguments for 'dma_pool_create'
  UDC: Use struct dma_pool instead of pci_pool
  DT bindings documentation for Broadcom IPROC USB Device controller.
  UDC: Add Synopsys UDC Platform driver

 .../devicetree/bindings/usb/iproc-udc.txt          |   21 +
 drivers/usb/gadget/udc/Kconfig                     |   32 +
 drivers/usb/gadget/udc/Makefile                    |    4 +-
 drivers/usb/gadget/udc/amd5536udc.c                | 3413 --------------------
 drivers/usb/gadget/udc/amd5536udc.h                |   58 +-
 drivers/usb/gadget/udc/amd5536udc_pci.c            |  218 ++
 drivers/usb/gadget/udc/snps_udc_core.c             | 3239 +++++++++++++++++++
 drivers/usb/gadget/udc/snps_udc_plat.c             |  344 ++
 8 files changed, 3912 insertions(+), 3417 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/iproc-udc.txt
 delete mode 100644 drivers/usb/gadget/udc/amd5536udc.c
 create mode 100644 drivers/usb/gadget/udc/amd5536udc_pci.c
 create mode 100644 drivers/usb/gadget/udc/snps_udc_core.c
 create mode 100644 drivers/usb/gadget/udc/snps_udc_plat.c

-- 
2.1.0

[toc] | [next] | [standalone]

#1610577 — [PATCH v3 4/7] UDC: Provide correct arguments for 'dma_pool_create'

Change the argument from NULL to a struct device for the
dma_pool_create call during dma init.

Signed-off-by: Raviteja Garimella <raviteja.garimella@broadcom.com>
---
 drivers/usb/gadget/udc/snps_udc_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/snps_udc_core.c b/drivers/usb/gadget/udc/snps_udc_core.c
index c778d51..5f95a65 100644
--- a/drivers/usb/gadget/udc/snps_udc_core.c
+++ b/drivers/usb/gadget/udc/snps_udc_core.c
@@ -3101,7 +3101,7 @@ int init_dma_pools(struct udc *dev)
 	}
 
 	/* DMA setup */
-	dev->data_requests = dma_pool_create("data_requests", NULL,
+	dev->data_requests = dma_pool_create("data_requests", dev->dev,
 		sizeof(struct udc_data_dma), 0, 0);
 	if (!dev->data_requests) {
 		DBG(dev, "can't get request data pool\n");
@@ -3112,7 +3112,7 @@ int init_dma_pools(struct udc *dev)
 	dev->ep[UDC_EP0IN_IX].dma = &dev->regs->ctl;
 
 	/* dma desc for setup data */
-	dev->stp_requests = dma_pool_create("setup requests", NULL,
+	dev->stp_requests = dma_pool_create("setup requests", dev->dev,
 		sizeof(struct udc_stp_dma), 0, 0);
 	if (!dev->stp_requests) {
 		DBG(dev, "can't get stp request pool\n");
-- 
2.1.0

[toc] | [prev] | [next] | [standalone]

#1610578 — [PATCH v3 7/7] UDC: Add Synopsys UDC Platform driver

This patch adds platform driver support for Synopsys UDC.

A new driver file (snps_udc_plat.c) is created for this purpose
where the platform driver registration is done based on OF
node.

Currently, UDC integrated into Broadcom's iProc SoCs (Northstar2
and Cygnus) work with this driver.

New members are added to the UDC data structure for having platform
device support along with extcon and phy support.

Kconfig and Makefiles are modified to select platform driver for
compilation.

Signed-off-by: Raviteja Garimella <raviteja.garimella@broadcom.com>
---
 drivers/usb/gadget/udc/Kconfig         |  16 +-
 drivers/usb/gadget/udc/Makefile        |   1 +
 drivers/usb/gadget/udc/amd5536udc.h    |  14 ++
 drivers/usb/gadget/udc/snps_udc_core.c |  54 ++++--
 drivers/usb/gadget/udc/snps_udc_plat.c | 344 +++++++++++++++++++++++++++++++++
 5 files changed, 409 insertions(+), 20 deletions(-)
 create mode 100644 drivers/usb/gadget/udc/snps_udc_plat.c

diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 2cee076..fe87523 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -254,7 +254,7 @@ config USB_MV_U3D
 	  controller, which support super speed USB peripheral.
 
 config USB_SNP_CORE
-	depends on USB_AMD5536UDC
+	depends on (USB_AMD5536UDC || USB_SNP_UDC_PLAT)
 	tristate
 	help
 	  This enables core driver support for Synopsys USB 2.0 Device
@@ -267,6 +267,20 @@ config USB_SNP_CORE
 	  This IP is different to the High Speed OTG IP that can be enabled
 	  by selecting USB_DWC2 or USB_DWC3 options.
 
+config USB_SNP_UDC_PLAT
+	tristate "Synopsys USB 2.0 Device controller"
+	depends on (USB_GADGET && OF)
+	select USB_GADGET_DUALSPEED
+	select USB_SNP_CORE
+	default ARCH_BCM_IPROC
+	help
+	  This adds Platform Device support for Synopsys Designware core
+	  AHB subsystem USB2.0 Device Controller (UDC).
+
+	  This driver works with UDCs integrated into Broadcom's Northstar2
+	  and Cygnus SoCs.
+
+	  If unsure, say N.
 #
 # Controllers available in both integrated and discrete versions
 #
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
index 4f4fd62..ea9e1c7 100644
--- a/drivers/usb/gadget/udc/Makefile
+++ b/drivers/usb/gadget/udc/Makefile
@@ -37,4 +37,5 @@ obj-$(CONFIG_USB_FOTG210_UDC)	+= fotg210-udc.o
 obj-$(CONFIG_USB_MV_U3D)	+= mv_u3d_core.o
 obj-$(CONFIG_USB_GR_UDC)	+= gr_udc.o
 obj-$(CONFIG_USB_GADGET_XILINX)	+= udc-xilinx.o
+obj-$(CONFIG_USB_SNP_UDC_PLAT) += snps_udc_plat.o
 obj-$(CONFIG_USB_BDC_UDC)	+= bdc/
diff --git a/drivers/usb/gadget/udc/amd5536udc.h b/drivers/usb/gadget/udc/amd5536udc.h
index 91aae23..4fe22d4 100644
--- a/drivers/usb/gadget/udc/amd5536udc.h
+++ b/drivers/usb/gadget/udc/amd5536udc.h
@@ -16,6 +16,7 @@
 /* debug control */
 /* #define UDC_VERBOSE */
 
+#include <linux/extcon.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
@@ -28,6 +29,9 @@
 #define UDC_HSA0_REV 1
 #define UDC_HSB1_REV 2
 
+/* Broadcom chip rev. */
+#define UDC_BCM_REV 10
+
 /*
  * SETUP usb commands
  * needed, because some SETUP's are handled in hw, but must be passed to
@@ -112,6 +116,7 @@
 #define UDC_DEVCTL_BRLEN_MASK			0x00ff0000
 #define UDC_DEVCTL_BRLEN_OFS			16
 
+#define UDC_DEVCTL_SRX_FLUSH			14
 #define UDC_DEVCTL_CSR_DONE			13
 #define UDC_DEVCTL_DEVNAK			12
 #define UDC_DEVCTL_SD				10
@@ -564,7 +569,15 @@ struct udc {
 	u16				cur_intf;
 	u16				cur_alt;
 
+	/* for platform device and extcon support */
 	struct device			*dev;
+	struct phy			*udc_phy;
+	struct extcon_dev		*edev;
+	struct extcon_specific_cable_nb	extcon_nb;
+	struct notifier_block		nb;
+	struct delayed_work		drd_work;
+	struct workqueue_struct		*drd_wq;
+	u32				conn_type;
 };
 
 #define to_amd5536_udc(g)	(container_of((g), struct udc, gadget))
@@ -580,6 +593,7 @@ int udc_enable_dev_setup_interrupts(struct udc *dev);
 int udc_mask_unused_interrupts(struct udc *dev);
 irqreturn_t udc_irq(int irq, void *pdev);
 void gadget_release(struct device *pdev);
+void empty_req_queue(struct udc_ep *ep);
 void udc_basic_init(struct udc *dev);
 void free_dma_pools(struct udc *dev);
 int init_dma_pools(struct udc *dev);
diff --git a/drivers/usb/gadget/udc/snps_udc_core.c b/drivers/usb/gadget/udc/snps_udc_core.c
index 9d3861b..b5f772e 100644
--- a/drivers/usb/gadget/udc/snps_udc_core.c
+++ b/drivers/usb/gadget/udc/snps_udc_core.c
@@ -41,7 +41,6 @@
 #include "amd5536udc.h"
 
 static void udc_tasklet_disconnect(unsigned long);
-static void empty_req_queue(struct udc_ep *);
 static void udc_setup_endpoints(struct udc *dev);
 static void udc_soft_reset(struct udc *dev);
 static struct udc_request *udc_alloc_bna_dummy(struct udc_ep *ep);
@@ -1248,7 +1247,7 @@ udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp)
 }
 
 /* Empty request queue of an endpoint; caller holds spinlock */
-static void empty_req_queue(struct udc_ep *ep)
+void empty_req_queue(struct udc_ep *ep)
 {
 	struct udc_request	*req;
 
@@ -1260,6 +1259,7 @@ static void empty_req_queue(struct udc_ep *ep)
 		complete_req(ep, req, -ESHUTDOWN);
 	}
 }
+EXPORT_SYMBOL_GPL(empty_req_queue);
 
 /* Dequeues a request packet, called by gadget driver */
 static int udc_dequeue(struct usb_ep *usbep, struct usb_request *usbreq)
@@ -1627,6 +1627,9 @@ static void udc_setup_endpoints(struct udc *dev)
 /* Bringup after Connect event, initial bringup to be ready for ep0 events */
 static void usb_connect(struct udc *dev)
 {
+	/* Return if already connected */
+	if (dev->connected)
+		return;
 
 	dev_info(dev->dev, "USB Connect\n");
 
@@ -1645,6 +1648,9 @@ static void usb_connect(struct udc *dev)
  */
 static void usb_disconnect(struct udc *dev)
 {
+	/* Return if already disconnected */
+	if (!dev->connected)
+		return;
 
 	dev_info(dev->dev, "USB Disconnect\n");
 
@@ -1719,11 +1725,15 @@ static void udc_soft_reset(struct udc *dev)
 	/* device int. status reset */
 	writel(UDC_DEV_MSK_DISABLE, &dev->regs->irqsts);
 
-	spin_lock_irqsave(&udc_irq_spinlock, flags);
-	writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg);
-	readl(&dev->regs->cfg);
-	spin_unlock_irqrestore(&udc_irq_spinlock, flags);
-
+	/* Don't do this for Broadcom UDC since this is a reserved
+	 * bit.
+	 */
+	if (dev->chiprev != UDC_BCM_REV) {
+		spin_lock_irqsave(&udc_irq_spinlock, flags);
+		writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg);
+		readl(&dev->regs->cfg);
+		spin_unlock_irqrestore(&udc_irq_spinlock, flags);
+	}
 }
 
 /* RDE timer callback to set RDE bit */
@@ -3175,21 +3185,27 @@ int udc_probe(struct udc *dev)
 	dev_info(dev->dev, "%s\n", mod_desc);
 
 	snprintf(tmp, sizeof(tmp), "%d", dev->irq);
-	dev_info(dev->dev,
-		 "irq %s, pci mem %08lx, chip rev %02x(Geode5536 %s)\n",
-		 tmp, dev->phys_addr, dev->chiprev,
-		 (dev->chiprev == UDC_HSA0_REV) ? "A0" : "B1");
-	strcpy(tmp, UDC_DRIVER_VERSION_STRING);
-	if (dev->chiprev == UDC_HSA0_REV) {
-		dev_err(dev->dev, "chip revision is A0; too old\n");
-		retval = -ENODEV;
-		goto finished;
+
+	/* Print this device info for AMD chips only*/
+	if (dev->chiprev == UDC_HSA0_REV ||
+	    dev->chiprev == UDC_HSB1_REV) {
+		dev_info(dev->dev, "irq %s, pci mem %08lx, chip rev %02x(Geode5536 %s)\n",
+			 tmp, dev->phys_addr, dev->chiprev,
+			 (dev->chiprev == UDC_HSA0_REV) ?
+			 "A0" : "B1");
+		strcpy(tmp, UDC_DRIVER_VERSION_STRING);
+		if (dev->chiprev == UDC_HSA0_REV) {
+			dev_err(dev->dev, "chip revision is A0; too old\n");
+			retval = -ENODEV;
+			goto finished;
+		}
+		dev_info(dev->dev,
+			 "driver version: %s(for Geode5536 B1)\n", tmp);
 	}
-	dev_info(dev->dev,
-		 "driver version: %s(for Geode5536 B1)\n", tmp);
+
 	udc = dev;
 
-	retval = usb_add_gadget_udc_release(&udc->pdev->dev, &dev->gadget,
+	retval = usb_add_gadget_udc_release(udc->dev, &dev->gadget,
 					    gadget_release);
 	if (retval)
 		goto finished;
diff --git a/drivers/usb/gadget/udc/snps_udc_plat.c b/drivers/usb/gadget/udc/snps_udc_plat.c
new file mode 100644
index 0000000..2e11f19
--- /dev/null
+++ b/drivers/usb/gadget/udc/snps_udc_plat.c
@@ -0,0 +1,344 @@
+/*
+ * snps_udc_plat.c - Synopsys UDC Platform Driver
+ *
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/extcon.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/module.h>
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include "amd5536udc.h"
+
+/* description */
+#define UDC_MOD_DESCRIPTION     "Synopsys UDC platform driver"
+
+void start_udc(struct udc *udc)
+{
+	if (udc->driver) {
+		dev_info(udc->dev, "Connecting...\n");
+		udc_enable_dev_setup_interrupts(udc);
+		udc_basic_init(udc);
+		udc->connected = 1;
+	}
+}
+
+void stop_udc(struct udc *udc)
+{
+	int tmp;
+	u32 reg;
+
+	spin_lock(&udc->lock);
+
+	/* Flush the receieve fifo */
+	reg = readl(&udc->regs->ctl);
+	reg |= AMD_BIT(UDC_DEVCTL_SRX_FLUSH);
+	writel(reg, &udc->regs->ctl);
+
+	reg = readl(&udc->regs->ctl);
+	reg &= ~(AMD_BIT(UDC_DEVCTL_SRX_FLUSH));
+	writel(reg, &udc->regs->ctl);
+	dev_dbg(udc->dev, "ep rx queue flushed\n");
+
+	/* Mask interrupts. Required more so when the
+	 * UDC is connected to a DRD phy.
+	 */
+	udc_mask_unused_interrupts(udc);
+
+	/* Disconnect gadget driver */
+	if (udc->driver) {
+		spin_unlock(&udc->lock);
+		udc->driver->disconnect(&udc->gadget);
+		spin_lock(&udc->lock);
+
+		/* empty queues */
+		for (tmp = 0; tmp < UDC_EP_NUM; tmp++)
+			empty_req_queue(&udc->ep[tmp]);
+	}
+	udc->connected = 0;
+
+	spin_unlock(&udc->lock);
+	dev_info(udc->dev, "Device disconnected\n");
+}
+
+void udc_drd_work(struct work_struct *work)
+{
+	struct udc *udc;
+
+	udc = container_of(to_delayed_work(work),
+			   struct udc, drd_work);
+
+	if (udc->conn_type) {
+		dev_dbg(udc->dev, "idle -> device\n");
+		start_udc(udc);
+	} else {
+		dev_dbg(udc->dev, "device -> idle\n");
+		stop_udc(udc);
+	}
+}
+
+static int usbd_connect_notify(struct notifier_block *self,
+			       unsigned long event, void *ptr)
+{
+	struct udc *udc = container_of(self, struct udc, nb);
+
+	dev_dbg(udc->dev, "%s: event: %lu\n", __func__, event);
+
+	udc->conn_type = event;
+
+	schedule_delayed_work(&udc->drd_work, 0);
+
+	return NOTIFY_OK;
+}
+
+static int udc_plat_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct udc *udc;
+	int ret;
+
+	udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+
+	spin_lock_init(&udc->lock);
+	udc->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	udc->virt_addr = devm_ioremap_resource(dev, res);
+	if (IS_ERR(udc->regs))
+		return PTR_ERR(udc->regs);
+
+	/* udc csr registers base */
+	udc->csr = udc->virt_addr + UDC_CSR_ADDR;
+
+	/* dev registers base */
+	udc->regs = udc->virt_addr + UDC_DEVCFG_ADDR;
+
+	/* ep registers base */
+	udc->ep_regs = udc->virt_addr + UDC_EPREGS_ADDR;
+
+	/* fifo's base */
+	udc->rxfifo = (u32 __iomem *)(udc->virt_addr + UDC_RXFIFO_ADDR);
+	udc->txfifo = (u32 __iomem *)(udc->virt_addr + UDC_TXFIFO_ADDR);
+
+	udc->phys_addr = (unsigned long)res->start;
+
+	udc->irq = irq_of_parse_and_map(dev->of_node, 0);
+	if (udc->irq <= 0) {
+		dev_err(dev, "Can't parse and map interrupt\n");
+		return -EINVAL;
+	}
+
+	udc->udc_phy = devm_of_phy_get_by_index(dev, dev->of_node, 0);
+	if (IS_ERR(udc->udc_phy)) {
+		dev_err(dev, "Failed to obtain phy from device tree\n");
+		return PTR_ERR(udc->udc_phy);
+	}
+
+	ret = phy_init(udc->udc_phy);
+	if (ret) {
+		dev_err(dev, "UDC phy init failed");
+		return ret;
+	}
+
+	ret = phy_power_on(udc->udc_phy);
+	if (ret) {
+		dev_err(dev, "UDC phy power on failed");
+		phy_exit(udc->udc_phy);
+		return ret;
+	}
+
+	/* Register for extcon if supported */
+	if (of_get_property(dev->of_node, "extcon", NULL)) {
+		udc->edev = extcon_get_edev_by_phandle(dev, 0);
+		if (IS_ERR(udc->edev)) {
+			if (PTR_ERR(udc->edev) == -EPROBE_DEFER)
+				return -EPROBE_DEFER;
+			dev_err(dev, "Invalid or missing extcon\n");
+			ret = PTR_ERR(udc->edev);
+			goto exit_phy;
+		}
+
+		udc->nb.notifier_call = usbd_connect_notify;
+		ret = extcon_register_notifier(udc->edev, EXTCON_USB,
+					       &udc->nb);
+		if (ret < 0) {
+			dev_err(dev, "Can't register extcon device\n");
+			goto exit_phy;
+		}
+
+		ret = extcon_get_cable_state_(udc->edev, EXTCON_USB);
+		if (ret < 0) {
+			dev_err(dev, "Can't get cable state\n");
+			goto exit_extcon;
+		} else if (ret) {
+			udc->conn_type = ret;
+		}
+		INIT_DELAYED_WORK(&udc->drd_work, udc_drd_work);
+	}
+
+	/* init dma pools */
+	if (use_dma) {
+		ret = init_dma_pools(udc);
+		if (ret != 0)
+			goto exit_extcon;
+	}
+
+	ret = devm_request_irq(dev, udc->irq, udc_irq, IRQF_SHARED,
+			       "snps-udc", udc);
+	if (ret < 0) {
+		dev_err(dev, "Request irq %d failed for UDC\n", udc->irq);
+		goto exit_dma;
+	}
+
+	platform_set_drvdata(pdev, udc);
+	udc->chiprev = UDC_BCM_REV;
+
+	if (udc_probe(udc)) {
+		ret = -ENODEV;
+		goto exit_dma;
+	}
+	dev_info(dev, "Synopsys UDC platform driver probe successful\n");
+
+	return 0;
+
+exit_dma:
+	if (use_dma)
+		free_dma_pools(udc);
+exit_extcon:
+	if (udc->edev)
+		extcon_unregister_notifier(udc->edev, EXTCON_USB, &udc->nb);
+exit_phy:
+	if (udc->udc_phy) {
+		phy_power_off(udc->udc_phy);
+		phy_exit(udc->udc_phy);
+	}
+	return ret;
+}
+
+static int udc_plat_remove(struct platform_device *pdev)
+{
+	struct udc *dev;
+
+	dev = platform_get_drvdata(pdev);
+
+	usb_del_gadget_udc(&dev->gadget);
+	/* gadget driver must not be registered */
+	if (WARN_ON(dev->driver))
+		return 0;
+
+	/* dma pool cleanup */
+	free_dma_pools(dev);
+
+	udc_remove(dev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	if (dev->drd_wq) {
+		flush_workqueue(dev->drd_wq);
+		destroy_workqueue(dev->drd_wq);
+	}
+
+	phy_power_off(dev->udc_phy);
+	phy_exit(dev->udc_phy);
+	extcon_unregister_notifier(dev->edev, EXTCON_USB, &dev->nb);
+
+	dev_info(&pdev->dev, "Synopsys UDC platform driver removed\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int udc_plat_suspend(struct device *dev)
+{
+	struct udc *udc;
+
+	udc = dev_get_drvdata(dev);
+	stop_udc(udc);
+
+	if (extcon_get_cable_state_(udc->edev, EXTCON_USB) > 0) {
+		dev_dbg(udc->dev, "device -> idle\n");
+		stop_udc(udc);
+	}
+	phy_power_off(udc->udc_phy);
+	phy_exit(udc->udc_phy);
+
+	return 0;
+}
+
+static int udc_plat_resume(struct device *dev)
+{
+	struct udc *udc;
+	int ret;
+
+	udc = dev_get_drvdata(dev);
+
+	ret = phy_init(udc->udc_phy);
+	if (ret) {
+		dev_err(udc->dev, "UDC phy init failure");
+		return ret;
+	}
+
+	ret = phy_power_on(udc->udc_phy);
+	if (ret) {
+		dev_err(udc->dev, "UDC phy power on failure");
+		phy_exit(udc->udc_phy);
+		return ret;
+	}
+
+	if (extcon_get_cable_state_(udc->edev, EXTCON_USB) > 0) {
+		dev_dbg(udc->dev, "idle -> device\n");
+		start_udc(udc);
+	}
+
+	return 0;
+}
+static const struct dev_pm_ops udc_plat_pm_ops = {
+	.suspend	= udc_plat_suspend,
+	.resume		= udc_plat_resume,
+};
+#endif
+
+#if defined(CONFIG_OF)
+static const struct of_device_id of_udc_match[] = {
+	{ .compatible = "brcm,ns2-udc", },
+	{ .compatible = "brcm,cygnus-udc", },
+	{ .compatible = "brcm,iproc-udc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, of_udc_match);
+#endif
+
+static struct platform_driver udc_plat_driver = {
+	.probe		= udc_plat_probe,
+	.remove		= udc_plat_remove,
+	.driver		= {
+		.name	= "snps-udc-plat",
+		.of_match_table = of_match_ptr(of_udc_match),
+#ifdef CONFIG_PM_SLEEP
+		.pm	= &udc_plat_pm_ops,
+#endif
+	},
+};
+module_platform_driver(udc_plat_driver);
+
+MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION);
+MODULE_AUTHOR("Broadcom");
+MODULE_LICENSE("GPL v2");
-- 
2.1.0

[toc] | [prev] | [next] | [standalone]

#1613826 — Re: [PATCH v3 2/7] UDC: Rename amd5536udc driver file based on IP

[Multipart message — attachments visible in raw view] — view raw

Hi,

Raviteja Garimella <raviteja.garimella@broadcom.com> writes:

> This patch renames the amd5536udc.c that has the core driver
> functionality of Synopsys UDC to snps_udc_core.c
>
> The symbols exported here can be used by any UDC driver that uses
> the same Synopsys IP.
>
> Signed-off-by: Raviteja Garimella <raviteja.garimella@broadcom.com>

unfortunately, this patch doesn't apply:

Applying: UDC: Rename amd5536udc driver file based on IP
error: corrupt patch at line 235
Patch failed at 0001 UDC: Rename amd5536udc driver file based on IP
The copy of the patch that failed is found in: .git/rebase-apply/patch
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".

Can you rebase on testing/next and resend?

-- 
balbi

[toc] | [prev] | [next] | [standalone]

#1614015 — Re: [PATCH v3 2/7] UDC: Rename amd5536udc driver file based on IP

Hi Felipe,

On Fri, Mar 31, 2017 at 3:19 PM, Felipe Balbi <balbi@kernel.org> wrote:
>
> Hi,
>
> Raviteja Garimella <raviteja.garimella@broadcom.com> writes:
>
>> This patch renames the amd5536udc.c that has the core driver
>> functionality of Synopsys UDC to snps_udc_core.c
>>
>> The symbols exported here can be used by any UDC driver that uses
>> the same Synopsys IP.
>>
>> Signed-off-by: Raviteja Garimella <raviteja.garimella@broadcom.com>
>
> unfortunately, this patch doesn't apply:
>
> Applying: UDC: Rename amd5536udc driver file based on IP
> error: corrupt patch at line 235
> Patch failed at 0001 UDC: Rename amd5536udc driver file based on IP
> The copy of the patch that failed is found in: .git/rebase-apply/patch
> When you have resolved this problem, run "git am --continue".
> If you prefer to skip this patch, run "git am --skip" instead.
> To restore the original branch and stop patching, run "git am --abort".
>
> Can you rebase on testing/next and resend?

I rebased my patches against testing/next branch, resolved the merge conflicts.
Just resent the patches 2/7 to 7/7. Please use them. I verified they are getting
applied without issues now.

Thanks,
Ravi
>
> --
> balbi

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web