Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1606190 > unrolled thread

Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree

Started byKeerthy <j-keerthy@ti.com>
First post2017-03-22 04:50 +0100
Last post2017-03-24 15:30 +0100
Articles 4 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data  to device tree Keerthy <j-keerthy@ti.com> - 2017-03-22 04:50 +0100
    Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset  data to device tree Tony Lindgren <tony@atomide.com> - 2017-03-23 22:00 +0100
      Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data  to device tree Keerthy <j-keerthy@ti.com> - 2017-03-24 04:30 +0100
        Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset  data to device tree Tony Lindgren <tony@atomide.com> - 2017-03-24 15:30 +0100

#1606190 — Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree

FromKeerthy <j-keerthy@ti.com>
Date2017-03-22 04:50 +0100
SubjectRe: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
Message-ID<tnFrz-4Ea-1@gated-at.bofh.it>

On Thursday 09 March 2017 01:35 PM, Keerthy wrote:
> Currently the slope and offset values for calculating the
> hot spot temperature of a particular thermal zone is part
> of driver data. Pass them here instead and obtain the values
> while of node parsing.
> 
> Tested for the slope and constant values on DRA7-EVM, OMAP3-BEAGLE. 

Hi Eduardo,

If the series looks okay could you please pull this?

Regards,
Keerthy

> 
> Changes in v2:
> 
>   * Added OMAP3 changes along with DRA7/OMAP4/OMAP5.
> 
> Keerthy (8):
>   arm: dts: omap3: Add cpu_thermal zone
>   ARM: DRA7: Thermal: Add slope and offset values
>   ARM: OMAP5: Thermal: Add slope and offset values
>   ARM: OMAP443x: Thermal: Add slope and offset values
>   ARM: OMAP4460: Thermal: Add slope and offset values
>   thermal: ti-soc-thermal: Fetch slope and offset from DT
>   thermal: ti-soc-thermal: Remove redundant constants
>   thermal: ti-soc-thermal: Remove redundant code
> 
>  arch/arm/boot/dts/dra7.dtsi                        |  17 +++
>  arch/arm/boot/dts/omap3-cpu-thermal.dtsi           |  20 +++
>  arch/arm/boot/dts/omap34xx.dtsi                    |   8 +-
>  arch/arm/boot/dts/omap36xx.dtsi                    |   8 +-
>  arch/arm/boot/dts/omap443x.dtsi                    |   4 +
>  arch/arm/boot/dts/omap4460.dtsi                    |   4 +
>  arch/arm/boot/dts/omap5.dtsi                       |   9 ++
>  .../thermal/ti-soc-thermal/dra752-thermal-data.c   |  10 --
>  .../thermal/ti-soc-thermal/omap3-thermal-data.c    |   4 -
>  .../thermal/ti-soc-thermal/omap4-thermal-data.c    |   6 -
>  .../thermal/ti-soc-thermal/omap5-thermal-data.c    |   4 -
>  drivers/thermal/ti-soc-thermal/ti-bandgap.h        |   4 -
>  drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 158 +--------------------
>  drivers/thermal/ti-soc-thermal/ti-thermal.h        |  16 ---
>  14 files changed, 71 insertions(+), 201 deletions(-)
>  create mode 100644 arch/arm/boot/dts/omap3-cpu-thermal.dtsi
>

[toc] | [next] | [standalone]

#1607907 — Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree

FromTony Lindgren <tony@atomide.com>
Date2017-03-23 22:00 +0100
SubjectRe: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
Message-ID<tohZU-7Mb-11@gated-at.bofh.it>
In reply to#1606190
* Keerthy <j-keerthy@ti.com> [170321 20:45]:
> 
> 
> On Thursday 09 March 2017 01:35 PM, Keerthy wrote:
> > Currently the slope and offset values for calculating the
> > hot spot temperature of a particular thermal zone is part
> > of driver data. Pass them here instead and obtain the values
> > while of node parsing.
> > 
> > Tested for the slope and constant values on DRA7-EVM, OMAP3-BEAGLE. 
> 
> Hi Eduardo,
> 
> If the series looks okay could you please pull this?

Also.. Are the dts changes safe for me to pick separately?

Regards,

Tony


> > Changes in v2:
> > 
> >   * Added OMAP3 changes along with DRA7/OMAP4/OMAP5.
> > 
> > Keerthy (8):
> >   arm: dts: omap3: Add cpu_thermal zone
> >   ARM: DRA7: Thermal: Add slope and offset values
> >   ARM: OMAP5: Thermal: Add slope and offset values
> >   ARM: OMAP443x: Thermal: Add slope and offset values
> >   ARM: OMAP4460: Thermal: Add slope and offset values
> >   thermal: ti-soc-thermal: Fetch slope and offset from DT
> >   thermal: ti-soc-thermal: Remove redundant constants
> >   thermal: ti-soc-thermal: Remove redundant code
> > 
> >  arch/arm/boot/dts/dra7.dtsi                        |  17 +++
> >  arch/arm/boot/dts/omap3-cpu-thermal.dtsi           |  20 +++
> >  arch/arm/boot/dts/omap34xx.dtsi                    |   8 +-
> >  arch/arm/boot/dts/omap36xx.dtsi                    |   8 +-
> >  arch/arm/boot/dts/omap443x.dtsi                    |   4 +
> >  arch/arm/boot/dts/omap4460.dtsi                    |   4 +
> >  arch/arm/boot/dts/omap5.dtsi                       |   9 ++
> >  .../thermal/ti-soc-thermal/dra752-thermal-data.c   |  10 --
> >  .../thermal/ti-soc-thermal/omap3-thermal-data.c    |   4 -
> >  .../thermal/ti-soc-thermal/omap4-thermal-data.c    |   6 -
> >  .../thermal/ti-soc-thermal/omap5-thermal-data.c    |   4 -
> >  drivers/thermal/ti-soc-thermal/ti-bandgap.h        |   4 -
> >  drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 158 +--------------------
> >  drivers/thermal/ti-soc-thermal/ti-thermal.h        |  16 ---
> >  14 files changed, 71 insertions(+), 201 deletions(-)
> >  create mode 100644 arch/arm/boot/dts/omap3-cpu-thermal.dtsi
> >

[toc] | [prev] | [next] | [standalone]

#1608099

FromKeerthy <j-keerthy@ti.com>
Date2017-03-24 04:30 +0100
Message-ID<too5j-3Qy-1@gated-at.bofh.it>
In reply to#1607907

On Friday 24 March 2017 02:22 AM, Tony Lindgren wrote:
> * Keerthy <j-keerthy@ti.com> [170321 20:45]:
>>
>>
>> On Thursday 09 March 2017 01:35 PM, Keerthy wrote:
>>> Currently the slope and offset values for calculating the
>>> hot spot temperature of a particular thermal zone is part
>>> of driver data. Pass them here instead and obtain the values
>>> while of node parsing.
>>>
>>> Tested for the slope and constant values on DRA7-EVM, OMAP3-BEAGLE. 
>>
>> Hi Eduardo,
>>
>> If the series looks okay could you please pull this?
> 
> Also.. Are the dts changes safe for me to pick separately?

Yes Tony they are safe to pulled separately.

> 
> Regards,
> 
> Tony
> 
> 
>>> Changes in v2:
>>>
>>>   * Added OMAP3 changes along with DRA7/OMAP4/OMAP5.
>>>
>>> Keerthy (8):
>>>   arm: dts: omap3: Add cpu_thermal zone
>>>   ARM: DRA7: Thermal: Add slope and offset values
>>>   ARM: OMAP5: Thermal: Add slope and offset values
>>>   ARM: OMAP443x: Thermal: Add slope and offset values
>>>   ARM: OMAP4460: Thermal: Add slope and offset values
>>>   thermal: ti-soc-thermal: Fetch slope and offset from DT
>>>   thermal: ti-soc-thermal: Remove redundant constants
>>>   thermal: ti-soc-thermal: Remove redundant code
>>>
>>>  arch/arm/boot/dts/dra7.dtsi                        |  17 +++
>>>  arch/arm/boot/dts/omap3-cpu-thermal.dtsi           |  20 +++
>>>  arch/arm/boot/dts/omap34xx.dtsi                    |   8 +-
>>>  arch/arm/boot/dts/omap36xx.dtsi                    |   8 +-
>>>  arch/arm/boot/dts/omap443x.dtsi                    |   4 +
>>>  arch/arm/boot/dts/omap4460.dtsi                    |   4 +
>>>  arch/arm/boot/dts/omap5.dtsi                       |   9 ++
>>>  .../thermal/ti-soc-thermal/dra752-thermal-data.c   |  10 --
>>>  .../thermal/ti-soc-thermal/omap3-thermal-data.c    |   4 -
>>>  .../thermal/ti-soc-thermal/omap4-thermal-data.c    |   6 -
>>>  .../thermal/ti-soc-thermal/omap5-thermal-data.c    |   4 -
>>>  drivers/thermal/ti-soc-thermal/ti-bandgap.h        |   4 -
>>>  drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 158 +--------------------
>>>  drivers/thermal/ti-soc-thermal/ti-thermal.h        |  16 ---
>>>  14 files changed, 71 insertions(+), 201 deletions(-)
>>>  create mode 100644 arch/arm/boot/dts/omap3-cpu-thermal.dtsi
>>>

[toc] | [prev] | [next] | [standalone]

#1608477 — Re: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree

FromTony Lindgren <tony@atomide.com>
Date2017-03-24 15:30 +0100
SubjectRe: [PATCH v2 0/8] thermal: ti-soc-thermal: Migrate slope/offset data to device tree
Message-ID<toyo2-2Pm-19@gated-at.bofh.it>
In reply to#1608099
* Keerthy <j-keerthy@ti.com> [170323 20:29]:
> 
> 
> On Friday 24 March 2017 02:22 AM, Tony Lindgren wrote:
> > * Keerthy <j-keerthy@ti.com> [170321 20:45]:
> >>
> >>
> >> On Thursday 09 March 2017 01:35 PM, Keerthy wrote:
> >>> Currently the slope and offset values for calculating the
> >>> hot spot temperature of a particular thermal zone is part
> >>> of driver data. Pass them here instead and obtain the values
> >>> while of node parsing.
> >>>
> >>> Tested for the slope and constant values on DRA7-EVM, OMAP3-BEAGLE. 
> >>
> >> Hi Eduardo,
> >>
> >> If the series looks okay could you please pull this?
> > 
> > Also.. Are the dts changes safe for me to pick separately?
> 
> Yes Tony they are safe to pulled separately.

OK applying patches 1 - 5 of this series into omap-for-v4.12/dt-v2.

Thanks,

Tony

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web