Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1603384 > unrolled thread

[PATCH v4 1/7] coresight: bindings for CPU debug module

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v4 1/7] coresight: bindings for CPU debug module Leo Yan <leo.yan@linaro.org> - 2017-03-17 16:10 +0100
    Re: [PATCH v4 1/7] coresight: bindings for CPU debug module Mathieu Poirier <mathieu.poirier@linaro.org> - 2017-03-17 17:30 +0100
      Re: [PATCH v4 1/7] coresight: bindings for CPU debug module Leo Yan <leo.yan@linaro.org> - 2017-03-20 13:00 +0100
        Re: [PATCH v4 1/7] coresight: bindings for CPU debug module Mathieu Poirier <mathieu.poirier@linaro.org> - 2017-03-20 18:40 +0100
      Re: [PATCH v4 1/7] coresight: bindings for CPU debug module Rob Herring <robh@kernel.org> - 2017-03-24 16:00 +0100

#1603384 — [PATCH v4 1/7] coresight: bindings for CPU debug module

According to ARMv8 architecture reference manual (ARM DDI 0487A.k)
Chapter 'Part H: External debug', the CPU can integrate debug module
and it can support self-hosted debug and external debug. Especially
for supporting self-hosted debug, this means the program can access
the debug module from mmio region; and usually the mmio region is
integrated with coresight.

So add document for binding debug component, includes binding to APB
clock; and also need specify the CPU node which the debug module is
dedicated to specific CPU.

Suggested-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 .../bindings/arm/coresight-cpu-debug.txt           | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt

diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
new file mode 100644
index 0000000..f6855c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
@@ -0,0 +1,46 @@
+* CoreSight CPU Debug Component:
+
+CoreSight cpu debug component are compliant with the ARMv8 architecture
+reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
+external debug module is mainly used for two modes: self-hosted debug and
+external debug, and it can be accessed from mmio region from Coresight
+and eventually the debug module connects with CPU for debugging. And the
+debug module provides sample-based profiling extension, which can be used
+to sample CPU program counter, secure state and exception level, etc;
+usually every CPU has one dedicated debug module to be connected.
+
+Required properties:
+
+- compatible : should be
+	     * "arm,coresight-cpu-debug"; supplemented with "arm,primecell"
+	       since this driver is using the AMBA bus interface.
+
+- reg : physical base address and length of the register set.
+
+- clocks : the clock associated to this component.
+
+- clock-names : the name of the clock referenced by the code. Since we are
+                using the AMBA framework, the name of the clock providing
+		the interconnect should be "apb_pclk" and the clock is
+		mandatory. The interface between the debug logic and the
+		processor core is clocked by the internal CPU clock, so it
+		is enabled with CPU clock by default.
+
+- cpu : the cpu phandle the debug module is affined to. When omitted
+	the module is considered to belong to CPU0.
+
+Optional properties:
+
+- power-domains: a phandle to power domain node for debug module. We can
+		 use "nohlt" to ensure CPU power domain is enabled.
+
+
+Example:
+
+	debug@f6590000 {
+		compatible = "arm,coresight-cpu-debug","arm,primecell";
+		reg = <0 0xf6590000 0 0x1000>;
+		clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+		clock-names = "apb_pclk";
+		cpu = <&cpu0>;
+	};
-- 
2.7.4

[toc] | [next] | [standalone]

#1603444

On Fri, Mar 17, 2017 at 11:02:17PM +0800, Leo Yan wrote:
> According to ARMv8 architecture reference manual (ARM DDI 0487A.k)
> Chapter 'Part H: External debug', the CPU can integrate debug module
> and it can support self-hosted debug and external debug. Especially
> for supporting self-hosted debug, this means the program can access
> the debug module from mmio region; and usually the mmio region is
> integrated with coresight.
> 
> So add document for binding debug component, includes binding to APB
> clock; and also need specify the CPU node which the debug module is
> dedicated to specific CPU.
> 
> Suggested-by: Mike Leach <mike.leach@linaro.org>
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Signed-off-by: Leo Yan <leo.yan@linaro.org>
> ---
>  .../bindings/arm/coresight-cpu-debug.txt           | 46 ++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
> new file mode 100644
> index 0000000..f6855c3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
> @@ -0,0 +1,46 @@
> +* CoreSight CPU Debug Component:
> +
> +CoreSight cpu debug component are compliant with the ARMv8 architecture
> +reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
> +external debug module is mainly used for two modes: self-hosted debug and
> +external debug, and it can be accessed from mmio region from Coresight
> +and eventually the debug module connects with CPU for debugging. And the
> +debug module provides sample-based profiling extension, which can be used
> +to sample CPU program counter, secure state and exception level, etc;
> +usually every CPU has one dedicated debug module to be connected.
> +
> +Required properties:
> +
> +- compatible : should be
> +	     * "arm,coresight-cpu-debug"; supplemented with "arm,primecell"
> +	       since this driver is using the AMBA bus interface.

This description needs to be refactored - see my comment from an earlier post
for more details.

> +
> +- reg : physical base address and length of the register set.
> +
> +- clocks : the clock associated to this component.
> +
> +- clock-names : the name of the clock referenced by the code. Since we are
> +                using the AMBA framework, the name of the clock providing
> +		the interconnect should be "apb_pclk" and the clock is
> +		mandatory. The interface between the debug logic and the
> +		processor core is clocked by the internal CPU clock, so it
> +		is enabled with CPU clock by default.
> +
> +- cpu : the cpu phandle the debug module is affined to. When omitted
> +	the module is considered to belong to CPU0.
> +
> +Optional properties:

s/properties/property

> +
> +- power-domains: a phandle to power domain node for debug module. We can
> +		 use "nohlt" to ensure CPU power domain is enabled.

The "power-domains" property is to take care of the debug power domain.  The
"nohlt" is to make sure registers in the CPU power domain are accessible - both
are independent from one another.  As such the description for this binding
shoudl be:

"a phandle to the debug power domain".

Thanks,
Mathieu

> +
> +
> +Example:
> +
> +	debug@f6590000 {
> +		compatible = "arm,coresight-cpu-debug","arm,primecell";
> +		reg = <0 0xf6590000 0 0x1000>;
> +		clocks = <&sys_ctrl HI6220_DAPB_CLK>;
> +		clock-names = "apb_pclk";
> +		cpu = <&cpu0>;
> +	};
> -- 
> 2.7.4
> 

[toc] | [prev] | [next] | [standalone]

#1604439

Hi Mathieu,

On Fri, Mar 17, 2017 at 10:13:35AM -0600, Mathieu Poirier wrote:

[...]

> > +- compatible : should be
> > +	     * "arm,coresight-cpu-debug"; supplemented with "arm,primecell"
> > +	       since this driver is using the AMBA bus interface.
> 
> This description needs to be refactored - see my comment from an earlier post
> for more details.

I have refined this description according to your suggestion:
http://archive.armlinux.org.uk/lurker/message/20170301.154550.f55a09d5.en.html

Am I missing anthing for this?

> > +- reg : physical base address and length of the register set.
> > +
> > +- clocks : the clock associated to this component.
> > +
> > +- clock-names : the name of the clock referenced by the code. Since we are
> > +                using the AMBA framework, the name of the clock providing
> > +		the interconnect should be "apb_pclk" and the clock is
> > +		mandatory. The interface between the debug logic and the
> > +		processor core is clocked by the internal CPU clock, so it
> > +		is enabled with CPU clock by default.
> > +
> > +- cpu : the cpu phandle the debug module is affined to. When omitted
> > +	the module is considered to belong to CPU0.
> > +
> > +Optional properties:
> 
> s/properties/property
> 
> > +
> > +- power-domains: a phandle to power domain node for debug module. We can
> > +		 use "nohlt" to ensure CPU power domain is enabled.
> 
> The "power-domains" property is to take care of the debug power domain.  The
> "nohlt" is to make sure registers in the CPU power domain are accessible - both
> are independent from one another.  As such the description for this binding
> shoudl be:
> 
> "a phandle to the debug power domain".

Will fix for upper two comments.

Thanks,
Leo Yan

[toc] | [prev] | [next] | [standalone]

#1604842

On Mon, Mar 20, 2017 at 07:49:53PM +0800, Leo Yan wrote:
> Hi Mathieu,
> 
> On Fri, Mar 17, 2017 at 10:13:35AM -0600, Mathieu Poirier wrote:
> 
> [...]
> 
> > > +- compatible : should be
> > > +	     * "arm,coresight-cpu-debug"; supplemented with "arm,primecell"
> > > +	       since this driver is using the AMBA bus interface.
> > 
> > This description needs to be refactored - see my comment from an earlier post
> > for more details.
> 
> I have refined this description according to your suggestion:
> http://archive.armlinux.org.uk/lurker/message/20170301.154550.f55a09d5.en.html

My apologies here, I did not express myself properly.  You got the wording right
but the format is a little bizarre.  The line break after "should be" and the
sentence that starts with a '*' on the next line feel unatural.  Simply

compatible : should be "arm,coresight-cpu-debug"; supplemented with
             "arm,primecell" since this driver is using the AMBA bus interface.

will be fine.

> 
> Am I missing anthing for this?
> 
> > > +- reg : physical base address and length of the register set.
> > > +
> > > +- clocks : the clock associated to this component.
> > > +
> > > +- clock-names : the name of the clock referenced by the code. Since we are
> > > +                using the AMBA framework, the name of the clock providing
> > > +		the interconnect should be "apb_pclk" and the clock is
> > > +		mandatory. The interface between the debug logic and the
> > > +		processor core is clocked by the internal CPU clock, so it
> > > +		is enabled with CPU clock by default.
> > > +
> > > +- cpu : the cpu phandle the debug module is affined to. When omitted
> > > +	the module is considered to belong to CPU0.
> > > +
> > > +Optional properties:
> > 
> > s/properties/property
> > 
> > > +
> > > +- power-domains: a phandle to power domain node for debug module. We can
> > > +		 use "nohlt" to ensure CPU power domain is enabled.
> > 
> > The "power-domains" property is to take care of the debug power domain.  The
> > "nohlt" is to make sure registers in the CPU power domain are accessible - both
> > are independent from one another.  As such the description for this binding
> > shoudl be:
> > 
> > "a phandle to the debug power domain".
> 
> Will fix for upper two comments.
> 
> Thanks,
> Leo Yan

[toc] | [prev] | [next] | [standalone]

#1608522

On Fri, Mar 17, 2017 at 10:13:35AM -0600, Mathieu Poirier wrote:
> On Fri, Mar 17, 2017 at 11:02:17PM +0800, Leo Yan wrote:
> > According to ARMv8 architecture reference manual (ARM DDI 0487A.k)
> > Chapter 'Part H: External debug', the CPU can integrate debug module
> > and it can support self-hosted debug and external debug. Especially
> > for supporting self-hosted debug, this means the program can access
> > the debug module from mmio region; and usually the mmio region is
> > integrated with coresight.
> > 
> > So add document for binding debug component, includes binding to APB
> > clock; and also need specify the CPU node which the debug module is
> > dedicated to specific CPU.
> > 
> > Suggested-by: Mike Leach <mike.leach@linaro.org>
> > Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> > Signed-off-by: Leo Yan <leo.yan@linaro.org>
> > ---
> >  .../bindings/arm/coresight-cpu-debug.txt           | 46 ++++++++++++++++++++++
> >  1 file changed, 46 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
> > new file mode 100644
> > index 0000000..f6855c3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
> > @@ -0,0 +1,46 @@
> > +* CoreSight CPU Debug Component:
> > +
> > +CoreSight cpu debug component are compliant with the ARMv8 architecture
> > +reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
> > +external debug module is mainly used for two modes: self-hosted debug and
> > +external debug, and it can be accessed from mmio region from Coresight
> > +and eventually the debug module connects with CPU for debugging. And the
> > +debug module provides sample-based profiling extension, which can be used
> > +to sample CPU program counter, secure state and exception level, etc;
> > +usually every CPU has one dedicated debug module to be connected.
> > +
> > +Required properties:
> > +
> > +- compatible : should be
> > +	     * "arm,coresight-cpu-debug"; supplemented with "arm,primecell"
> > +	       since this driver is using the AMBA bus interface.
> 
> This description needs to be refactored - see my comment from an earlier post
> for more details.
> 
> > +
> > +- reg : physical base address and length of the register set.
> > +
> > +- clocks : the clock associated to this component.
> > +
> > +- clock-names : the name of the clock referenced by the code. Since we are
> > +                using the AMBA framework, the name of the clock providing
> > +		the interconnect should be "apb_pclk" and the clock is
> > +		mandatory. The interface between the debug logic and the
> > +		processor core is clocked by the internal CPU clock, so it
> > +		is enabled with CPU clock by default.
> > +
> > +- cpu : the cpu phandle the debug module is affined to. When omitted
> > +	the module is considered to belong to CPU0.
> > +
> > +Optional properties:
> 
> s/properties/property

I prefer it as-is. Then it doesn't need to be changed if we add 
properties.

Rob

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web