Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1607607 > unrolled thread

[PATCH v1 0/2] cpuidle: Fixes in cpuidle driver

Back to article view | Back to linux.kernel

Contents

  [PATCH v1 0/2] cpuidle: Fixes in cpuidle driver Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> - 2017-03-23 16:30 +0100
    Re: [PATCH v2 1/2] powerpc/powernv/cpuidle: Pass correct drv->cpumask  for registration "Rafael J. Wysocki" <rafael@kernel.org> - 2017-03-23 16:30 +0100
      Re: [PATCH v2 1/2] powerpc/powernv/cpuidle: Pass correct  drv->cpumask for registration Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> - 2017-03-23 16:50 +0100
      Re: [PATCH v2 1/2] powerpc/powernv/cpuidle: Pass correct drv->cpumask for registration Michael Ellerman <mpe@ellerman.id.au> - 2017-03-27 12:50 +0200
    [PATCH v2 2/2] cpuidle: Validate cpu_dev in cpuidle_add_sysfs Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> - 2017-03-23 16:30 +0100
      Re: [PATCH v2 2/2] cpuidle: Validate cpu_dev in cpuidle_add_sysfs "Rafael J. Wysocki" <rafael@kernel.org> - 2017-03-23 16:30 +0100
        Re: [PATCH v2 2/2] cpuidle: Validate cpu_dev in cpuidle_add_sysfs Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> - 2017-03-23 16:50 +0100
    [PATCH v2 1/2] powerpc/powernv/cpuidle: Pass correct drv->cpumask for registration Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> - 2017-03-23 16:30 +0100
      Re: [PATCH v2 1/2] powerpc/powernv/cpuidle: Pass correct drv->cpumask  for registration Gautham R Shenoy <ego.lkml@gmail.com> - 2017-03-24 09:40 +0100

#1607607 — [PATCH v1 0/2] cpuidle: Fixes in cpuidle driver

When CONFIG_HOTPLUG_CPU=n and cpu_present is less than cpu_possible,
then cpuidle-powernv not passing an explicit drv->cpu_mask allows
generic cpuidle driver to try create sysfs objects for cpus that does
not have cpu_devices created by calling register_cpu().

This caused kernel to access incorrect address and crash. The
following patch series fixes the cpuidle-powernv driver and also adds
additional checks in cpuidle_add_sysfs()

This patch set is against v4.11-rc3.

Changed from v1: Updated commit message and comments.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>

[toc] | [next] | [standalone]

#1607609 — Re: [PATCH v2 1/2] powerpc/powernv/cpuidle: Pass correct drv->cpumask for registration

On Thu, Mar 23, 2017 at 4:22 PM, Vaidyanathan Srinivasan
<svaidy@linux.vnet.ibm.com> wrote:
> drv->cpumask defaults to cpu_possible_mask in __cpuidle_driver_init().
> On PowerNV platform cpu_present could be less than cpu_possible in cases
> where firmware detects the cpu, but it is not available to the OS.  When
> CONFIG_HOTPLUG_CPU=n, such cpus are not hotplugable at runtime and hence
> we skip creating cpu_device.
>
> This breaks cpuidle on powernv where register_cpu() is not called for
> cpus in cpu_possible_mask that cannot be hot-added at runtime.
>
> Trying cpuidle_register_device() on cpu without cpu_device will cause
> crash like this:
>
> cpu 0xf: Vector: 380 (Data SLB Access) at [c000000ff1503490]
>     pc: c00000000022c8bc: string+0x34/0x60
>     lr: c00000000022ed78: vsnprintf+0x284/0x42c
>     sp: c000000ff1503710
>    msr: 9000000000009033
>    dar: 6000000060000000
>   current = 0xc000000ff1480000
>   paca    = 0xc00000000fe82d00   softe: 0        irq_happened: 0x01
>     pid   = 1, comm = swapper/8
> Linux version 4.11.0-rc2 (sv@sagarika) (gcc version 4.9.4
> (Buildroot 2017.02-00004-gc28573e) ) #15 SMP Fri Mar 17 19:32:02 IST 2017
> enter ? for help
> [link register   ] c00000000022ed78 vsnprintf+0x284/0x42c
> [c000000ff1503710] c00000000022ebb8 vsnprintf+0xc4/0x42c (unreliable)
> [c000000ff1503800] c00000000022ef40 vscnprintf+0x20/0x44
> [c000000ff1503830] c0000000000ab61c vprintk_emit+0x94/0x2cc
> [c000000ff15038a0] c0000000000acc9c vprintk_func+0x60/0x74
> [c000000ff15038c0] c000000000619694 printk+0x38/0x4c
> [c000000ff15038e0] c000000000224950 kobject_get+0x40/0x60
> [c000000ff1503950] c00000000022507c kobject_add_internal+0x60/0x2c4
> [c000000ff15039e0] c000000000225350 kobject_init_and_add+0x70/0x78
> [c000000ff1503a60] c00000000053c288 cpuidle_add_sysfs+0x9c/0xe0
> [c000000ff1503ae0] c00000000053aeac cpuidle_register_device+0xd4/0x12c
> [c000000ff1503b30] c00000000053b108 cpuidle_register+0x98/0xcc
> [c000000ff1503bc0] c00000000085eaf0 powernv_processor_idle_init+0x140/0x1e0
> [c000000ff1503c60] c00000000000cd60 do_one_initcall+0xc0/0x15c
> [c000000ff1503d20] c000000000833e84 kernel_init_freeable+0x1a0/0x25c
> [c000000ff1503dc0] c00000000000d478 kernel_init+0x24/0x12c
> [c000000ff1503e30] c00000000000b564 ret_from_kernel_thread+0x5c/0x78
>
> This patch fixes the bug by passing correct cpumask from
> powernv-cpuidle driver.
>
> Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>

That needs to be ACKed by someone familiar with powernv.

> ---
>  drivers/cpuidle/cpuidle-powernv.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>
> diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c
> index a06df51..82f7b33 100644
> --- a/drivers/cpuidle/cpuidle-powernv.c
> +++ b/drivers/cpuidle/cpuidle-powernv.c
> @@ -175,6 +175,24 @@ static int powernv_cpuidle_driver_init(void)
>                 drv->state_count += 1;
>         }
>
> +       /*
> +        * On PowerNV platform cpu_present may be less that cpu_possible in
> +        * cases where firmware detects the cpu, but it is not available to the
> +        * OS.  If CONFIG_HOTPLUG_CPU=n then such CPUs are not hotplugable at
> +        * runtime and hence cpu_devices are not created for those cpus by
> +        * generic topology_init().
> +        *
> +        * drv->cpumask defaults to cpu_possible_mask in
> +        * __cpuidle_driver_init().  This breaks cpuidle on powernv where
> +        * cpu_devices are not created for cpus in cpu_possible_mask that
> +        * cannot be hot-added later at runtime.
> +        *
> +        * Trying cpuidle_register_device() on a cpu without cpu_devices is
> +        * incorrect. Hence pass correct cpu mask to generic cpuidle driver.
> +        */
> +
> +       drv->cpumask = (struct cpumask *)cpu_present_mask;
> +
>         return 0;
>  }
>
> --
> 2.9.3
>

[toc] | [prev] | [next] | [standalone]

#1607641 — Re: [PATCH v2 1/2] powerpc/powernv/cpuidle: Pass correct drv->cpumask for registration

* Rafael J. Wysocki <rafael@kernel.org> [2017-03-23 16:28:31]:

> On Thu, Mar 23, 2017 at 4:22 PM, Vaidyanathan Srinivasan
> <svaidy@linux.vnet.ibm.com> wrote:
> > drv->cpumask defaults to cpu_possible_mask in __cpuidle_driver_init().
> > On PowerNV platform cpu_present could be less than cpu_possible in cases
> > where firmware detects the cpu, but it is not available to the OS.  When
> > CONFIG_HOTPLUG_CPU=n, such cpus are not hotplugable at runtime and hence
> > we skip creating cpu_device.
> >
> > This breaks cpuidle on powernv where register_cpu() is not called for
> > cpus in cpu_possible_mask that cannot be hot-added at runtime.
> >
> > Trying cpuidle_register_device() on cpu without cpu_device will cause
> > crash like this:
> >
> > cpu 0xf: Vector: 380 (Data SLB Access) at [c000000ff1503490]
> >     pc: c00000000022c8bc: string+0x34/0x60
> >     lr: c00000000022ed78: vsnprintf+0x284/0x42c
> >     sp: c000000ff1503710
> >    msr: 9000000000009033
> >    dar: 6000000060000000
> >   current = 0xc000000ff1480000
> >   paca    = 0xc00000000fe82d00   softe: 0        irq_happened: 0x01
> >     pid   = 1, comm = swapper/8
> > Linux version 4.11.0-rc2 (sv@sagarika) (gcc version 4.9.4
> > (Buildroot 2017.02-00004-gc28573e) ) #15 SMP Fri Mar 17 19:32:02 IST 2017
> > enter ? for help
> > [link register   ] c00000000022ed78 vsnprintf+0x284/0x42c
> > [c000000ff1503710] c00000000022ebb8 vsnprintf+0xc4/0x42c (unreliable)
> > [c000000ff1503800] c00000000022ef40 vscnprintf+0x20/0x44
> > [c000000ff1503830] c0000000000ab61c vprintk_emit+0x94/0x2cc
> > [c000000ff15038a0] c0000000000acc9c vprintk_func+0x60/0x74
> > [c000000ff15038c0] c000000000619694 printk+0x38/0x4c
> > [c000000ff15038e0] c000000000224950 kobject_get+0x40/0x60
> > [c000000ff1503950] c00000000022507c kobject_add_internal+0x60/0x2c4
> > [c000000ff15039e0] c000000000225350 kobject_init_and_add+0x70/0x78
> > [c000000ff1503a60] c00000000053c288 cpuidle_add_sysfs+0x9c/0xe0
> > [c000000ff1503ae0] c00000000053aeac cpuidle_register_device+0xd4/0x12c
> > [c000000ff1503b30] c00000000053b108 cpuidle_register+0x98/0xcc
> > [c000000ff1503bc0] c00000000085eaf0 powernv_processor_idle_init+0x140/0x1e0
> > [c000000ff1503c60] c00000000000cd60 do_one_initcall+0xc0/0x15c
> > [c000000ff1503d20] c000000000833e84 kernel_init_freeable+0x1a0/0x25c
> > [c000000ff1503dc0] c00000000000d478 kernel_init+0x24/0x12c
> > [c000000ff1503e30] c00000000000b564 ret_from_kernel_thread+0x5c/0x78
> >
> > This patch fixes the bug by passing correct cpumask from
> > powernv-cpuidle driver.
> >
> > Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
> 
> That needs to be ACKed by someone familiar with powernv.

Previous version at
https://lists.ozlabs.org/pipermail/linuxppc-dev/2017-March/155587.html

I had not CCed linux-pm in the first post.

Michael and Mikey have reviewed the previous version.  Let me get an
ack for you to proceed with the merge.

Thanks,
Vaidy

[toc] | [prev] | [next] | [standalone]

#1609732 — Re: [PATCH v2 1/2] powerpc/powernv/cpuidle: Pass correct drv->cpumask for registration

"Rafael J. Wysocki" <rafael@kernel.org> writes:

> On Thu, Mar 23, 2017 at 4:22 PM, Vaidyanathan Srinivasan
> <svaidy@linux.vnet.ibm.com> wrote:
>> drv->cpumask defaults to cpu_possible_mask in __cpuidle_driver_init().
>> On PowerNV platform cpu_present could be less than cpu_possible in cases
>> where firmware detects the cpu, but it is not available to the OS.  When
>> CONFIG_HOTPLUG_CPU=n, such cpus are not hotplugable at runtime and hence
>> we skip creating cpu_device.
>>
>> This breaks cpuidle on powernv where register_cpu() is not called for
>> cpus in cpu_possible_mask that cannot be hot-added at runtime.
>>
>> Trying cpuidle_register_device() on cpu without cpu_device will cause
>> crash like this:
>>
>> cpu 0xf: Vector: 380 (Data SLB Access) at [c000000ff1503490]
>>     pc: c00000000022c8bc: string+0x34/0x60
>>     lr: c00000000022ed78: vsnprintf+0x284/0x42c
>>     sp: c000000ff1503710
>>    msr: 9000000000009033
>>    dar: 6000000060000000
>>   current = 0xc000000ff1480000
>>   paca    = 0xc00000000fe82d00   softe: 0        irq_happened: 0x01
>>     pid   = 1, comm = swapper/8
>> Linux version 4.11.0-rc2 (sv@sagarika) (gcc version 4.9.4
>> (Buildroot 2017.02-00004-gc28573e) ) #15 SMP Fri Mar 17 19:32:02 IST 2017
>> enter ? for help
>> [link register   ] c00000000022ed78 vsnprintf+0x284/0x42c
>> [c000000ff1503710] c00000000022ebb8 vsnprintf+0xc4/0x42c (unreliable)
>> [c000000ff1503800] c00000000022ef40 vscnprintf+0x20/0x44
>> [c000000ff1503830] c0000000000ab61c vprintk_emit+0x94/0x2cc
>> [c000000ff15038a0] c0000000000acc9c vprintk_func+0x60/0x74
>> [c000000ff15038c0] c000000000619694 printk+0x38/0x4c
>> [c000000ff15038e0] c000000000224950 kobject_get+0x40/0x60
>> [c000000ff1503950] c00000000022507c kobject_add_internal+0x60/0x2c4
>> [c000000ff15039e0] c000000000225350 kobject_init_and_add+0x70/0x78
>> [c000000ff1503a60] c00000000053c288 cpuidle_add_sysfs+0x9c/0xe0
>> [c000000ff1503ae0] c00000000053aeac cpuidle_register_device+0xd4/0x12c
>> [c000000ff1503b30] c00000000053b108 cpuidle_register+0x98/0xcc
>> [c000000ff1503bc0] c00000000085eaf0 powernv_processor_idle_init+0x140/0x1e0
>> [c000000ff1503c60] c00000000000cd60 do_one_initcall+0xc0/0x15c
>> [c000000ff1503d20] c000000000833e84 kernel_init_freeable+0x1a0/0x25c
>> [c000000ff1503dc0] c00000000000d478 kernel_init+0x24/0x12c
>> [c000000ff1503e30] c00000000000b564 ret_from_kernel_thread+0x5c/0x78
>>
>> This patch fixes the bug by passing correct cpumask from
>> powernv-cpuidle driver.
>>
>> Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
>
> That needs to be ACKed by someone familiar with powernv.

Acked-by: Michael Ellerman <mpe@ellerman.id.au>

cheers

[toc] | [prev] | [next] | [standalone]

#1607614 — [PATCH v2 2/2] cpuidle: Validate cpu_dev in cpuidle_add_sysfs

If a given cpu is not in cpu_present and cpu hotplug
is disabled, arch can skip setting up the cpu_dev.

Arch cpuidle driver should pass correct cpu mask
for registration, but failing to do so by the driver
causes error to propagate and crash like this:

[   30.076045] Unable to handle kernel paging request for
				data at address 0x00000048
[   30.076100] Faulting instruction address: 0xc0000000007b2f30
cpu 0x4d: Vector: 300 (Data Access) at [c000003feb18b670]
    pc: c0000000007b2f30: kobject_get+0x20/0x70
    lr: c0000000007b3c94: kobject_add_internal+0x54/0x3f0
    sp: c000003feb18b8f0
   msr: 9000000000009033
   dar: 48
 dsisr: 40000000
  current = 0xc000003fd2ed8300
  paca    = 0xc00000000fbab500   softe: 0        irq_happened: 0x01
    pid   = 1, comm = swapper/0
Linux version 4.11.0-rc2-svaidy+ (sv@sagarika) (gcc version 6.2.0
20161005 (Ubuntu 6.2.0-5ubuntu12) ) #10 SMP Sun Mar 19 00:08:09 IST 2017
enter ? for help
[c000003feb18b960] c0000000007b3c94 kobject_add_internal+0x54/0x3f0
[c000003feb18b9f0] c0000000007b43a4 kobject_init_and_add+0x64/0xa0
[c000003feb18ba70] c000000000e284f4 cpuidle_add_sysfs+0xb4/0x130
[c000003feb18baf0] c000000000e26038 cpuidle_register_device+0x118/0x1c0
[c000003feb18bb30] c000000000e26c48 cpuidle_register+0x78/0x120
[c000003feb18bbc0] c00000000168fd9c powernv_processor_idle_init+0x110/0x1c4
[c000003feb18bc40] c00000000000cff8 do_one_initcall+0x68/0x1d0
[c000003feb18bd00] c0000000016242f4 kernel_init_freeable+0x280/0x360
[c000003feb18bdc0] c00000000000d864 kernel_init+0x24/0x160
[c000003feb18be30] c00000000000b4e8 ret_from_kernel_thread+0x5c/0x74

Validating cpu_dev fixes the crash and reports correct error message like:

[   30.163506] Failed to register cpuidle device for cpu136
[   30.173329] Registration of powernv driver failed.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
---
 drivers/cpuidle/sysfs.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index c5adc8c..f2c3bce 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -615,6 +615,18 @@ int cpuidle_add_sysfs(struct cpuidle_device *dev)
 	struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
 	int error;
 
+	/*
+	 * Return error if cpu_device is not setup for this cpu.  This
+	 * could happen if arch did not setup cpu_device since this
+	 * cpu is not in cpu_present mask and the driver did not send
+	 * correct cpu mask at registration.  Without this check we
+	 * would end up passing bogus value for &cpu_dev->kobj in
+	 * kobject_init_and_add().
+	 */
+
+	if (!cpu_dev)
+		return -ENODEV;
+
 	kdev = kzalloc(sizeof(*kdev), GFP_KERNEL);
 	if (!kdev)
 		return -ENOMEM;
-- 
2.9.3

[toc] | [prev] | [next] | [standalone]

#1607621 — Re: [PATCH v2 2/2] cpuidle: Validate cpu_dev in cpuidle_add_sysfs

On Thu, Mar 23, 2017 at 4:22 PM, Vaidyanathan Srinivasan
<svaidy@linux.vnet.ibm.com> wrote:
> If a given cpu is not in cpu_present and cpu hotplug
> is disabled, arch can skip setting up the cpu_dev.
>
> Arch cpuidle driver should pass correct cpu mask
> for registration, but failing to do so by the driver
> causes error to propagate and crash like this:
>
> [   30.076045] Unable to handle kernel paging request for
>                                 data at address 0x00000048
> [   30.076100] Faulting instruction address: 0xc0000000007b2f30
> cpu 0x4d: Vector: 300 (Data Access) at [c000003feb18b670]
>     pc: c0000000007b2f30: kobject_get+0x20/0x70
>     lr: c0000000007b3c94: kobject_add_internal+0x54/0x3f0
>     sp: c000003feb18b8f0
>    msr: 9000000000009033
>    dar: 48
>  dsisr: 40000000
>   current = 0xc000003fd2ed8300
>   paca    = 0xc00000000fbab500   softe: 0        irq_happened: 0x01
>     pid   = 1, comm = swapper/0
> Linux version 4.11.0-rc2-svaidy+ (sv@sagarika) (gcc version 6.2.0
> 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #10 SMP Sun Mar 19 00:08:09 IST 2017
> enter ? for help
> [c000003feb18b960] c0000000007b3c94 kobject_add_internal+0x54/0x3f0
> [c000003feb18b9f0] c0000000007b43a4 kobject_init_and_add+0x64/0xa0
> [c000003feb18ba70] c000000000e284f4 cpuidle_add_sysfs+0xb4/0x130
> [c000003feb18baf0] c000000000e26038 cpuidle_register_device+0x118/0x1c0
> [c000003feb18bb30] c000000000e26c48 cpuidle_register+0x78/0x120
> [c000003feb18bbc0] c00000000168fd9c powernv_processor_idle_init+0x110/0x1c4
> [c000003feb18bc40] c00000000000cff8 do_one_initcall+0x68/0x1d0
> [c000003feb18bd00] c0000000016242f4 kernel_init_freeable+0x280/0x360
> [c000003feb18bdc0] c00000000000d864 kernel_init+0x24/0x160
> [c000003feb18be30] c00000000000b4e8 ret_from_kernel_thread+0x5c/0x74
>
> Validating cpu_dev fixes the crash and reports correct error message like:
>
> [   30.163506] Failed to register cpuidle device for cpu136
> [   30.173329] Registration of powernv driver failed.
>
> Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>

The previous version is in linux-next already and I'm going to push it
for merging shortly.

> ---
>  drivers/cpuidle/sysfs.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
> index c5adc8c..f2c3bce 100644
> --- a/drivers/cpuidle/sysfs.c
> +++ b/drivers/cpuidle/sysfs.c
> @@ -615,6 +615,18 @@ int cpuidle_add_sysfs(struct cpuidle_device *dev)
>         struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
>         int error;
>
> +       /*
> +        * Return error if cpu_device is not setup for this cpu.  This
> +        * could happen if arch did not setup cpu_device since this
> +        * cpu is not in cpu_present mask and the driver did not send
> +        * correct cpu mask at registration.  Without this check we
> +        * would end up passing bogus value for &cpu_dev->kobj in
> +        * kobject_init_and_add().
> +        */
> +
> +       if (!cpu_dev)
> +               return -ENODEV;
> +
>         kdev = kzalloc(sizeof(*kdev), GFP_KERNEL);
>         if (!kdev)
>                 return -ENOMEM;
> --
> 2.9.3
>

[toc] | [prev] | [next] | [standalone]

#1607637 — Re: [PATCH v2 2/2] cpuidle: Validate cpu_dev in cpuidle_add_sysfs

* Rafael J. Wysocki <rafael@kernel.org> [2017-03-23 16:27:31]:

> On Thu, Mar 23, 2017 at 4:22 PM, Vaidyanathan Srinivasan
> <svaidy@linux.vnet.ibm.com> wrote:
> > If a given cpu is not in cpu_present and cpu hotplug
> > is disabled, arch can skip setting up the cpu_dev.
> >
> > Arch cpuidle driver should pass correct cpu mask
> > for registration, but failing to do so by the driver
> > causes error to propagate and crash like this:
> >
> > [   30.076045] Unable to handle kernel paging request for
> >                                 data at address 0x00000048
> > [   30.076100] Faulting instruction address: 0xc0000000007b2f30
> > cpu 0x4d: Vector: 300 (Data Access) at [c000003feb18b670]
> >     pc: c0000000007b2f30: kobject_get+0x20/0x70
> >     lr: c0000000007b3c94: kobject_add_internal+0x54/0x3f0
> >     sp: c000003feb18b8f0
> >    msr: 9000000000009033
> >    dar: 48
> >  dsisr: 40000000
> >   current = 0xc000003fd2ed8300
> >   paca    = 0xc00000000fbab500   softe: 0        irq_happened: 0x01
> >     pid   = 1, comm = swapper/0
> > Linux version 4.11.0-rc2-svaidy+ (sv@sagarika) (gcc version 6.2.0
> > 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #10 SMP Sun Mar 19 00:08:09 IST 2017
> > enter ? for help
> > [c000003feb18b960] c0000000007b3c94 kobject_add_internal+0x54/0x3f0
> > [c000003feb18b9f0] c0000000007b43a4 kobject_init_and_add+0x64/0xa0
> > [c000003feb18ba70] c000000000e284f4 cpuidle_add_sysfs+0xb4/0x130
> > [c000003feb18baf0] c000000000e26038 cpuidle_register_device+0x118/0x1c0
> > [c000003feb18bb30] c000000000e26c48 cpuidle_register+0x78/0x120
> > [c000003feb18bbc0] c00000000168fd9c powernv_processor_idle_init+0x110/0x1c4
> > [c000003feb18bc40] c00000000000cff8 do_one_initcall+0x68/0x1d0
> > [c000003feb18bd00] c0000000016242f4 kernel_init_freeable+0x280/0x360
> > [c000003feb18bdc0] c00000000000d864 kernel_init+0x24/0x160
> > [c000003feb18be30] c00000000000b4e8 ret_from_kernel_thread+0x5c/0x74
> >
> > Validating cpu_dev fixes the crash and reports correct error message like:
> >
> > [   30.163506] Failed to register cpuidle device for cpu136
> > [   30.173329] Registration of powernv driver failed.
> >
> > Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
> 
> The previous version is in linux-next already and I'm going to push it
> for merging shortly.

Thanks Rafael.  The previous version is good for merge.

--Vaidy

[toc] | [prev] | [next] | [standalone]

#1607615 — [PATCH v2 1/2] powerpc/powernv/cpuidle: Pass correct drv->cpumask for registration

drv->cpumask defaults to cpu_possible_mask in __cpuidle_driver_init().
On PowerNV platform cpu_present could be less than cpu_possible in cases
where firmware detects the cpu, but it is not available to the OS.  When
CONFIG_HOTPLUG_CPU=n, such cpus are not hotplugable at runtime and hence
we skip creating cpu_device.

This breaks cpuidle on powernv where register_cpu() is not called for
cpus in cpu_possible_mask that cannot be hot-added at runtime.

Trying cpuidle_register_device() on cpu without cpu_device will cause
crash like this:

cpu 0xf: Vector: 380 (Data SLB Access) at [c000000ff1503490]
    pc: c00000000022c8bc: string+0x34/0x60
    lr: c00000000022ed78: vsnprintf+0x284/0x42c
    sp: c000000ff1503710
   msr: 9000000000009033
   dar: 6000000060000000
  current = 0xc000000ff1480000
  paca    = 0xc00000000fe82d00   softe: 0        irq_happened: 0x01
    pid   = 1, comm = swapper/8
Linux version 4.11.0-rc2 (sv@sagarika) (gcc version 4.9.4
(Buildroot 2017.02-00004-gc28573e) ) #15 SMP Fri Mar 17 19:32:02 IST 2017
enter ? for help
[link register   ] c00000000022ed78 vsnprintf+0x284/0x42c
[c000000ff1503710] c00000000022ebb8 vsnprintf+0xc4/0x42c (unreliable)
[c000000ff1503800] c00000000022ef40 vscnprintf+0x20/0x44
[c000000ff1503830] c0000000000ab61c vprintk_emit+0x94/0x2cc
[c000000ff15038a0] c0000000000acc9c vprintk_func+0x60/0x74
[c000000ff15038c0] c000000000619694 printk+0x38/0x4c
[c000000ff15038e0] c000000000224950 kobject_get+0x40/0x60
[c000000ff1503950] c00000000022507c kobject_add_internal+0x60/0x2c4
[c000000ff15039e0] c000000000225350 kobject_init_and_add+0x70/0x78
[c000000ff1503a60] c00000000053c288 cpuidle_add_sysfs+0x9c/0xe0
[c000000ff1503ae0] c00000000053aeac cpuidle_register_device+0xd4/0x12c
[c000000ff1503b30] c00000000053b108 cpuidle_register+0x98/0xcc
[c000000ff1503bc0] c00000000085eaf0 powernv_processor_idle_init+0x140/0x1e0
[c000000ff1503c60] c00000000000cd60 do_one_initcall+0xc0/0x15c
[c000000ff1503d20] c000000000833e84 kernel_init_freeable+0x1a0/0x25c
[c000000ff1503dc0] c00000000000d478 kernel_init+0x24/0x12c
[c000000ff1503e30] c00000000000b564 ret_from_kernel_thread+0x5c/0x78

This patch fixes the bug by passing correct cpumask from
powernv-cpuidle driver.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
---
 drivers/cpuidle/cpuidle-powernv.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c
index a06df51..82f7b33 100644
--- a/drivers/cpuidle/cpuidle-powernv.c
+++ b/drivers/cpuidle/cpuidle-powernv.c
@@ -175,6 +175,24 @@ static int powernv_cpuidle_driver_init(void)
 		drv->state_count += 1;
 	}
 
+	/*
+	 * On PowerNV platform cpu_present may be less that cpu_possible in
+	 * cases where firmware detects the cpu, but it is not available to the
+	 * OS.  If CONFIG_HOTPLUG_CPU=n then such CPUs are not hotplugable at
+	 * runtime and hence cpu_devices are not created for those cpus by
+	 * generic topology_init().
+	 *
+	 * drv->cpumask defaults to cpu_possible_mask in
+	 * __cpuidle_driver_init().  This breaks cpuidle on powernv where
+	 * cpu_devices are not created for cpus in cpu_possible_mask that
+	 * cannot be hot-added later at runtime.
+	 *
+	 * Trying cpuidle_register_device() on a cpu without cpu_devices is
+	 * incorrect. Hence pass correct cpu mask to generic cpuidle driver.
+	 */
+
+	drv->cpumask = (struct cpumask *)cpu_present_mask;
+
 	return 0;
 }
 
-- 
2.9.3

[toc] | [prev] | [next] | [standalone]

#1608214 — Re: [PATCH v2 1/2] powerpc/powernv/cpuidle: Pass correct drv->cpumask for registration

On Thu, Mar 23, 2017 at 8:52 PM, Vaidyanathan Srinivasan
<svaidy@linux.vnet.ibm.com> wrote:
> drv->cpumask defaults to cpu_possible_mask in __cpuidle_driver_init().
> On PowerNV platform cpu_present could be less than cpu_possible in cases
> where firmware detects the cpu, but it is not available to the OS.  When
> CONFIG_HOTPLUG_CPU=n, such cpus are not hotplugable at runtime and hence
> we skip creating cpu_device.
>
> This breaks cpuidle on powernv where register_cpu() is not called for
> cpus in cpu_possible_mask that cannot be hot-added at runtime.
>
> Trying cpuidle_register_device() on cpu without cpu_device will cause
> crash like this:
>
> cpu 0xf: Vector: 380 (Data SLB Access) at [c000000ff1503490]
>     pc: c00000000022c8bc: string+0x34/0x60
>     lr: c00000000022ed78: vsnprintf+0x284/0x42c
>     sp: c000000ff1503710
>    msr: 9000000000009033
>    dar: 6000000060000000
>   current = 0xc000000ff1480000
>   paca    = 0xc00000000fe82d00   softe: 0        irq_happened: 0x01
>     pid   = 1, comm = swapper/8
> Linux version 4.11.0-rc2 (sv@sagarika) (gcc version 4.9.4
> (Buildroot 2017.02-00004-gc28573e) ) #15 SMP Fri Mar 17 19:32:02 IST 2017
> enter ? for help
> [link register   ] c00000000022ed78 vsnprintf+0x284/0x42c
> [c000000ff1503710] c00000000022ebb8 vsnprintf+0xc4/0x42c (unreliable)
> [c000000ff1503800] c00000000022ef40 vscnprintf+0x20/0x44
> [c000000ff1503830] c0000000000ab61c vprintk_emit+0x94/0x2cc
> [c000000ff15038a0] c0000000000acc9c vprintk_func+0x60/0x74
> [c000000ff15038c0] c000000000619694 printk+0x38/0x4c
> [c000000ff15038e0] c000000000224950 kobject_get+0x40/0x60
> [c000000ff1503950] c00000000022507c kobject_add_internal+0x60/0x2c4
> [c000000ff15039e0] c000000000225350 kobject_init_and_add+0x70/0x78
> [c000000ff1503a60] c00000000053c288 cpuidle_add_sysfs+0x9c/0xe0
> [c000000ff1503ae0] c00000000053aeac cpuidle_register_device+0xd4/0x12c
> [c000000ff1503b30] c00000000053b108 cpuidle_register+0x98/0xcc
> [c000000ff1503bc0] c00000000085eaf0 powernv_processor_idle_init+0x140/0x1e0
> [c000000ff1503c60] c00000000000cd60 do_one_initcall+0xc0/0x15c
> [c000000ff1503d20] c000000000833e84 kernel_init_freeable+0x1a0/0x25c
> [c000000ff1503dc0] c00000000000d478 kernel_init+0x24/0x12c
> [c000000ff1503e30] c00000000000b564 ret_from_kernel_thread+0x5c/0x78
>
> This patch fixes the bug by passing correct cpumask from
> powernv-cpuidle driver.
>
> Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>


Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>

> ---
>  drivers/cpuidle/cpuidle-powernv.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>
> diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c
> index a06df51..82f7b33 100644
> --- a/drivers/cpuidle/cpuidle-powernv.c
> +++ b/drivers/cpuidle/cpuidle-powernv.c
> @@ -175,6 +175,24 @@ static int powernv_cpuidle_driver_init(void)
>                 drv->state_count += 1;
>         }
>
> +       /*
> +        * On PowerNV platform cpu_present may be less that cpu_possible in
> +        * cases where firmware detects the cpu, but it is not available to the
> +        * OS.  If CONFIG_HOTPLUG_CPU=n then such CPUs are not hotplugable at
> +        * runtime and hence cpu_devices are not created for those cpus by
> +        * generic topology_init().
> +        *
> +        * drv->cpumask defaults to cpu_possible_mask in
> +        * __cpuidle_driver_init().  This breaks cpuidle on powernv where
> +        * cpu_devices are not created for cpus in cpu_possible_mask that
> +        * cannot be hot-added later at runtime.
> +        *
> +        * Trying cpuidle_register_device() on a cpu without cpu_devices is
> +        * incorrect. Hence pass correct cpu mask to generic cpuidle driver.
> +        */
> +
> +       drv->cpumask = (struct cpumask *)cpu_present_mask;
> +
>         return 0;
>  }
>
> --
> 2.9.3
>



-- 
Thanks and Regards
gautham.

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web