Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1604415 > unrolled thread

[v4 2/3] dt-bindings: mmc: add description of PHY delays for sdhci-cadence

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [v4 2/3] dt-bindings: mmc: add description of PHY delays for sdhci-cadence Piotr Sroka <piotrs@cadence.com> - 2017-03-20 12:30 +0100
    Re: [v4 2/3] dt-bindings: mmc: add description of PHY delays for sdhci-cadence Masahiro Yamada <yamada.masahiro@socionext.com> - 2017-03-21 08:50 +0100

#1604415 — [v4 2/3] dt-bindings: mmc: add description of PHY delays for sdhci-cadence

DTS properties are used instead of fixed data
because PHY settings can be different for different chips/boards.
Add description of new DLL PHY delays.

Signed-off-by: Piotr Sroka <piotrs@cadence.com>
---
Changes for v2:
- file was created in v2. It was a part of driver source file patch.
- most delays were moved from dts file
  to data associated with an SoC specific compatible
- description of delays was updated to be more clearly
---
Changes for v3:
- move all delays back to dts because they are also boards dependent
- prefix all of the Cadence-specific properties with cdns prefix
---
Changes for v4:
- change the beginning of the commit subject
---
 .../devicetree/bindings/mmc/sdhci-cadence.txt      | 48 ++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
index c0f37cb..c341820 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
@@ -19,6 +19,53 @@ if supported.  See mmc.txt for details.
 - mmc-hs400-1_8v
 - mmc-hs400-1_2v
 
+Some PHY delays can be configured by following properties.
+PHY DLL input delays:
+They are used to delay the data valid window, and align the window
+to sampling clock. The delay starts from 5ns (for delay parameter equal to 0)
+and it is increased by 2.5ns in each step.
+- cdns,phy-input-delay-sd-highspeed:
+  Value of the delay in the input path for SD high-speed timing
+  Valid range = [0:0x1F].
+- cdns,phy-input-delay-legacy:
+  Value of the delay in the input path for SD legacy timing
+  Valid range = [0:0x1F].
+- cdns,phy-input-delay-sd-uhs-sdr12:
+  Value of the delay in the input path for SD UHS SDR12 timing
+  Valid range = [0:0x1F].
+- cdns,phy-input-delay-sd-uhs-sdr25:
+  Value of the delay in the input path for SD UHS SDR25 timing
+  Valid range = [0:0x1F].
+- cdns,phy-input-delay-sd-uhs-sdr50:
+  Value of the delay in the input path for SD UHS SDR50 timing
+  Valid range = [0:0x1F].
+- cdns,phy-input-delay-sd-uhs-ddr50:
+  Value of the delay in the input path for SD UHS DDR50 timing
+  Valid range = [0:0x1F].
+- cdns,phy-input-delay-mmc-highspeed:
+  Value of the delay in the input path for MMC high-speed timing
+  Valid range = [0:0x1F].
+- cdns,phy-input-delay-mmc-ddr:
+  Value of the delay in the input path for eMMC high-speed DDR timing
+  Valid range = [0:0x1F].
+
+PHY DLL clock delays:
+Each delay property represents the fraction of the clock period.
+The approximate delay value will be
+(<delay property value>/128)*sdmclk_clock_period.
+- cdns,phy-dll-delay-sdclk:
+  Value of the delay introduced on the sdclk output
+  for all modes except HS200, HS400 and HS400_ES.
+  Valid range = [0:0x7F].
+- cdns,phy-dll-delay-sdclk-hsmmc:
+  Value of the delay introduced on the sdclk output
+  for HS200, HS400 and HS400_ES speed modes.
+  Valid range = [0:0x7F].
+- cdns,phy-dll-delay-strobe:
+  Value of the delay introduced on the dat_strobe input
+  used in HS400 / HS400_ES speed modes.
+  Valid range = [0:0x7F].
+
 Example:
 	emmc: sdhci@5a000000 {
 		compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
@@ -29,4 +76,5 @@ Example:
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
 		mmc-hs400-1_8v;
+		cdns,phy-dll-delay-sdclk = <0>;
 	};
-- 
2.2.2

[toc] | [next] | [standalone]

#1605377

2017-03-20 20:20 GMT+09:00 Piotr Sroka <piotrs@cadence.com>:
> DTS properties are used instead of fixed data
> because PHY settings can be different for different chips/boards.
> Add description of new DLL PHY delays.
>
> Signed-off-by: Piotr Sroka <piotrs@cadence.com>
> ---
> Changes for v2:
> - file was created in v2. It was a part of driver source file patch.
> - most delays were moved from dts file
>   to data associated with an SoC specific compatible
> - description of delays was updated to be more clearly
> ---
> Changes for v3:
> - move all delays back to dts because they are also boards dependent
> - prefix all of the Cadence-specific properties with cdns prefix
> ---
> Changes for v4:
> - change the beginning of the commit subject
> ---


Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>




-- 
Best Regards
Masahiro Yamada

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web