Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1603498 > unrolled thread

Re: [x86] 45fc8757d1: BUG:unable_to_handle_kernel

Started byThomas Garnier <thgarnie@google.com>
First post2017-03-17 18:50 +0100
Last post2017-03-21 17:20 +0100
Articles 3 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [x86] 45fc8757d1: BUG:unable_to_handle_kernel Thomas Garnier <thgarnie@google.com> - 2017-03-17 18:50 +0100
    Re: [x86] 45fc8757d1: BUG:unable_to_handle_kernel Ye Xiaolong <xiaolong.ye@intel.com> - 2017-03-20 02:50 +0100
      Re: [x86] 45fc8757d1: BUG:unable_to_handle_kernel Thomas Garnier <thgarnie@google.com> - 2017-03-21 17:20 +0100

#1603498 — Re: [x86] 45fc8757d1: BUG:unable_to_handle_kernel

FromThomas Garnier <thgarnie@google.com>
Date2017-03-17 18:50 +0100
SubjectRe: [x86] 45fc8757d1: BUG:unable_to_handle_kernel
Message-ID<tm4aK-1BY-13@gated-at.bofh.it>
I tried multiple things to repro this crash without success:
 - Used the config on my existing qemu setup (boot fine)
 - Add most of the command-line (boot fine)
 - Try to run the script on a dedicated machine and it seems it is
really tailored for your setup. I had errors with usernames and cpio
crashing.

Any additional information you could share? (RIP -> function name,
callstack etc..?)

Thanks,

On Fri, Mar 17, 2017 at 4:59 AM, kernel test robot
<xiaolong.ye@intel.com> wrote:
>
> FYI, we noticed the following commit:
>
> commit: 45fc8757d1d2128e342b4e7ef39adedf7752faac ("x86: Make the GDT remapping read-only on 64-bit")
> https://git.kernel.org/cgit/linux/kernel/git/tip/tip.git x86/mm
>
> in testcase: boot
>
> on test machine: qemu-system-x86_64 -enable-kvm -m 420M
>
> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
>
>
> +------------------------------------------+------------+------------+
> |                                          | 69218e4799 | 45fc8757d1 |
> +------------------------------------------+------------+------------+
> | boot_successes                           | 8          | 2          |
> | boot_failures                            | 0          | 11         |
> | BUG:unable_to_handle_kernel              | 0          | 11         |
> | Oops:#[##]                               | 0          | 11         |
> | Kernel_panic-not_syncing:Fatal_exception | 0          | 11         |
> +------------------------------------------+------------+------------+
>
>
>
> [    4.347219] BUG: unable to handle kernel paging request at ffffffffff577060
> [    4.349770] IP: 0xf77e91ed
> [    4.351365] PGD 1e0c067
> [    4.351366] P4D 1e0c067
> [    4.352885] PUD 1e0e067
> [    4.354421] PMD 1e0f067
> [    4.355947] PTE 800000000be09161
> [    4.357457]
> [    4.360480] Oops: 0003 [#1] SMP
> [    4.362150] Modules linked in:
> [    4.363816] CPU: 0 PID: 1 Comm: init Not tainted 4.11.0-rc2-00014-g45fc875 #15
> [    4.367207] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
> [    4.371277] task: ffff88000b9a8000 task.stack: ffffc900000d0000
> [    4.373550] RIP: 0023:0xf77e91ed
> [    4.375284] RSP: 002b:00000000ffed034c EFLAGS: 00010246
> [    4.377409] RAX: 0000000000000063 RBX: 00000000f77edff0 RCX: 00000000ffed034c
> [    4.379996] RDX: 00000000f77e1690 RSI: 00000000f77ee094 RDI: 000000000000000c
> [    4.382588] RBP: 00000000ffed0368 R08: 0000000000000000 R09: 0000000000000000
> [    4.385136] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
> [    4.387709] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
> [    4.390289] FS:  0000000000000000(0000) GS:ffff88000be00000(0000) knlGS:0000000000000000
> [    4.393870] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
> [    4.396131] CR2: ffffffffff577060 CR3: 0000000019d08000 CR4: 00000000000006f0
> [    4.398696] RIP: 0xf77e91ed RSP: 00000000ffed034c
> [    4.400716] CR2: ffffffffff577060
> [    4.402425] ---[ end trace 35060e6ad8052d5b ]---
>
>
> To reproduce:
>
>         git clone https://github.com/01org/lkp-tests.git
>         cd lkp-tests
>         bin/lkp qemu -k <bzImage> job-script  # job-script is attached in this email
>
>
>
> Thanks,
> Kernel Test Robot



-- 
Thomas

[toc] | [next] | [standalone]

#1604134

FromYe Xiaolong <xiaolong.ye@intel.com>
Date2017-03-20 02:50 +0100
Message-ID<tmUCl-5RZ-3@gated-at.bofh.it>
In reply to#1603498
On 03/17, Thomas Garnier wrote:
>I tried multiple things to repro this crash without success:
> - Used the config on my existing qemu setup (boot fine)
> - Add most of the command-line (boot fine)
> - Try to run the script on a dedicated machine and it seems it is
>really tailored for your setup. I had errors with usernames and cpio
>crashing.

Could you paste the error log?
I suspect it was caused by job-script saved as dos format, you may try
`dos2unix job-script` before "lkp qemu" to see whether it works.

Thanks,
Xiaolong
>
>Any additional information you could share? (RIP -> function name,
>callstack etc..?)
>
>Thanks,
>
>On Fri, Mar 17, 2017 at 4:59 AM, kernel test robot
><xiaolong.ye@intel.com> wrote:
>>
>> FYI, we noticed the following commit:
>>
>> commit: 45fc8757d1d2128e342b4e7ef39adedf7752faac ("x86: Make the GDT remapping read-only on 64-bit")
>> https://git.kernel.org/cgit/linux/kernel/git/tip/tip.git x86/mm
>>
>> in testcase: boot
>>
>> on test machine: qemu-system-x86_64 -enable-kvm -m 420M
>>
>> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
>>
>>
>> +------------------------------------------+------------+------------+
>> |                                          | 69218e4799 | 45fc8757d1 |
>> +------------------------------------------+------------+------------+
>> | boot_successes                           | 8          | 2          |
>> | boot_failures                            | 0          | 11         |
>> | BUG:unable_to_handle_kernel              | 0          | 11         |
>> | Oops:#[##]                               | 0          | 11         |
>> | Kernel_panic-not_syncing:Fatal_exception | 0          | 11         |
>> +------------------------------------------+------------+------------+
>>
>>
>>
>> [    4.347219] BUG: unable to handle kernel paging request at ffffffffff577060
>> [    4.349770] IP: 0xf77e91ed
>> [    4.351365] PGD 1e0c067
>> [    4.351366] P4D 1e0c067
>> [    4.352885] PUD 1e0e067
>> [    4.354421] PMD 1e0f067
>> [    4.355947] PTE 800000000be09161
>> [    4.357457]
>> [    4.360480] Oops: 0003 [#1] SMP
>> [    4.362150] Modules linked in:
>> [    4.363816] CPU: 0 PID: 1 Comm: init Not tainted 4.11.0-rc2-00014-g45fc875 #15
>> [    4.367207] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
>> [    4.371277] task: ffff88000b9a8000 task.stack: ffffc900000d0000
>> [    4.373550] RIP: 0023:0xf77e91ed
>> [    4.375284] RSP: 002b:00000000ffed034c EFLAGS: 00010246
>> [    4.377409] RAX: 0000000000000063 RBX: 00000000f77edff0 RCX: 00000000ffed034c
>> [    4.379996] RDX: 00000000f77e1690 RSI: 00000000f77ee094 RDI: 000000000000000c
>> [    4.382588] RBP: 00000000ffed0368 R08: 0000000000000000 R09: 0000000000000000
>> [    4.385136] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
>> [    4.387709] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
>> [    4.390289] FS:  0000000000000000(0000) GS:ffff88000be00000(0000) knlGS:0000000000000000
>> [    4.393870] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
>> [    4.396131] CR2: ffffffffff577060 CR3: 0000000019d08000 CR4: 00000000000006f0
>> [    4.398696] RIP: 0xf77e91ed RSP: 00000000ffed034c
>> [    4.400716] CR2: ffffffffff577060
>> [    4.402425] ---[ end trace 35060e6ad8052d5b ]---
>>
>>
>> To reproduce:
>>
>>         git clone https://github.com/01org/lkp-tests.git
>>         cd lkp-tests
>>         bin/lkp qemu -k <bzImage> job-script  # job-script is attached in this email
>>
>>
>>
>> Thanks,
>> Kernel Test Robot
>
>
>
>-- 
>Thomas

[toc] | [prev] | [next] | [standalone]

#1605764

FromThomas Garnier <thgarnie@google.com>
Date2017-03-21 17:20 +0100
Message-ID<tnuFP-5IV-9@gated-at.bofh.it>
In reply to#1604134
On Sun, Mar 19, 2017 at 6:40 PM, Ye Xiaolong <xiaolong.ye@intel.com> wrote:
> Could you paste the error log?
> I suspect it was caused by job-script saved as dos format, you may try
> `dos2unix job-script` before "lkp qemu" to see whether it works.
>

You were right, I had some strange '\n' error in the middle of a lot
of them. dos2unix on the job script fixed the issue.

-- 
Thomas

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web