Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1604063 > unrolled thread

Re: [Outreachy kernel] Re: [PATCH] staging: iio: ade7753: replace mlock with driver private lock

Started byGargi Sharma <gs051095@gmail.com>
First post2017-03-19 19:10 +0100
Last post2017-03-19 19:10 +0100
Articles 1 — 1 participant

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.


Contents

  Re: [Outreachy kernel] Re: [PATCH] staging: iio: ade7753: replace  mlock with driver private lock Gargi Sharma <gs051095@gmail.com> - 2017-03-19 19:10 +0100

#1604063 — Re: [Outreachy kernel] Re: [PATCH] staging: iio: ade7753: replace mlock with driver private lock

FromGargi Sharma <gs051095@gmail.com>
Date2017-03-19 19:10 +0100
SubjectRe: [Outreachy kernel] Re: [PATCH] staging: iio: ade7753: replace mlock with driver private lock
Message-ID<tmNrc-108-19@gated-at.bofh.it>
On Mon, Mar 13, 2017 at 5:30 PM, Lars-Peter Clausen <lars@metafoo.de> wrote:
> On 03/12/2017 02:32 PM, simran singhal wrote:
>> The IIO subsystem is redefining iio_dev->mlock to be used by
>> the IIO core only for protecting device operating mode changes.
>> ie. Changes between INDIO_DIRECT_MODE, INDIO_BUFFER_* modes.
>>
>> In this driver, mlock was being used to protect hardware state
>> changes.  Replace it with a lock in the devices global data.
>>
>> Fix some coding style issues related to white space also.
>>
>> Signed-off-by: simran singhal <singhalsimran0@gmail.com>
>> ---
>>  drivers/staging/iio/meter/ade7753.c | 14 ++++++++------
>>  1 file changed, 8 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/staging/iio/meter/ade7753.c b/drivers/staging/iio/meter/ade7753.c
>> index dfd8b71..ca99d82 100644
>> --- a/drivers/staging/iio/meter/ade7753.c
>> +++ b/drivers/staging/iio/meter/ade7753.c
>> @@ -81,12 +81,14 @@
>>   * @tx:         transmit buffer
>>   * @rx:         receive buffer
>>   * @buf_lock:       mutex to protect tx and rx
>> + * @lock:    protect sensor state
>
> It might make sense to reuse the existing lock which currently protects the
> read/write functions. You can do this by introducing a variant of
> ade7753_spi_{read,write}_reg_16() that does not take a lock and use these to
> implement the read-modify-write cycle in a protected section.
>

The only instance I was able to find was drivers/iio/adc/vf610_adc.c
where read modify write cycles are present on the register
VF610_REG_ADC_CFG. I believe writel() & readl() is used for this
purpose.

In this case, we want to write to data to a device on the SPI bus. Can
we use writel() for this purpose?

> Looking through the driver there seem to be other places as well that do
> read-modify-write that should be protected by a lock, but currently are not.
> This might be a good task.
>
>>   **/
>>  struct ade7753_state {
>> -         struct spi_device   *us;
>> -                 struct mutex        buf_lock;
>> -                         u8          tx[ADE7753_MAX_TX] ____cacheline_aligned;
>> -                                 u8          rx[ADE7753_MAX_RX];
>> +     struct spi_device   *us;
>> +     struct mutex        buf_lock;
>> +     struct mutex        lock;       /* protect sensor state */
>> +     u8          tx[ADE7753_MAX_TX] ____cacheline_aligned;
>> +     u8          rx[ADE7753_MAX_RX];
>>  };
>>
>>  static int ade7753_spi_write_reg_8(struct device *dev,
>> @@ -484,7 +486,7 @@ static ssize_t ade7753_write_frequency(struct device *dev,
>>       if (!val)
>>               return -EINVAL;
>>
>> -     mutex_lock(&indio_dev->mlock);
>> +     mutex_lock(&st->lock);
>>
>>       t = 27900 / val;
>>       if (t > 0)
>> @@ -505,7 +507,7 @@ static ssize_t ade7753_write_frequency(struct device *dev,
>>       ret = ade7753_spi_write_reg_16(dev, ADE7753_MODE, reg);
>>
>>  out:
>> -     mutex_unlock(&indio_dev->mlock);
>> +     mutex_unlock(&st->lock);
>>
>>       return ret ? ret : len;
>>  }
>>
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To post to this group, send email to outreachy-kernel@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/6e55c61d-7587-4191-1fc5-de43e26986d7%40metafoo.de.
> For more options, visit https://groups.google.com/d/optout.

[toc] | [standalone]


Back to top | Article view | linux.kernel


csiph-web