Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1601769 > unrolled thread

Re: [PATCH 2/2] dt-bindings: power/supply: Add support for xmega16d4-battery

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH 2/2] dt-bindings: power/supply: Add support for  xmega16d4-battery Sebastian Reichel <sre@kernel.org> - 2017-03-15 23:00 +0100

#1601769 — Re: [PATCH 2/2] dt-bindings: power/supply: Add support for xmega16d4-battery

[Multipart message — attachments visible in raw view] — view raw

Hi,

On Thu, Feb 23, 2017 at 06:44:59PM +0100, Enric Balletbo Serra wrote:
> Ooops, sorry I forget to add the device tree maintainers so
> 
> CC'ing Rob Herring and Mark Rutland
> 
> 
> 2017-02-23 18:38 GMT+01:00 Enric Balletbo i Serra
> <enric.balletbo@collabora.com>:
> > Add the documentation for binding of Toby Churchill SBS battery monitor
> > driver. The device is connected via SPI and is able to report different
> > battery characteristics.
> >
> > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> > ---
> >  .../devicetree/bindings/power/supply/xmega16d4-battery.txt   | 12 ++++++++++++
> >  1 file changed, 12 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/power/supply/xmega16d4-battery.txt
> >
> > diff --git a/Documentation/devicetree/bindings/power/supply/xmega16d4-battery.txt b/Documentation/devicetree/bindings/power/supply/xmega16d4-battery.txt
> > new file mode 100644
> > index 0000000..c76db67
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/power/supply/xmega16d4-battery.txt
> > @@ -0,0 +1,12 @@
> > +Binding for the Toby Churchill SBS battery monitor
> > +
> > +Required properties :
> > + - compatible : "tcl,xmega16d4-battery"

The same naming issue, that I mentioned in the driver patch applies
here. Also you should reference the standard spi binding document
for properties like spi-max-frequency.

-- Sebastian

> > +Example:
> > +
> > +       battery: smart-battery@0 {
> > +               compatible = "tcl,xmega16d4-battery";
> > +               reg = <0>;
> > +               spi-max-frequency = <100000>;
> > +       };

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web