Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1603097 > unrolled thread

Re: [PATCH v4 0/7] mmc: bcm2835: Add new driver for the sdhost controller

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH v4 0/7] mmc: bcm2835: Add new driver for the sdhost controller Ulf Hansson <ulf.hansson@linaro.org> - 2017-03-17 09:00 +0100

#1603097 — Re: [PATCH v4 0/7] mmc: bcm2835: Add new driver for the sdhost controller

On 8 March 2017 at 10:19, Gerd Hoffmann <kraxel@redhat.com> wrote:
>   Hi,
>
> Next version if the bcm2835 sdhost patch series.
>
> New in v4:
>  * squashed in more cleanups by Stefan.
>  * removed the long cleanup patch list
>    from commit message (patch 2).
>  * rebased to (and tested with) 4.11-rc1.
>  * minor fixes pointed out in review.
>
> New in v3:
>  * squashed in cleanups by Stefan.
>  * use one dma channel only.
>  * improve commit messages.
>
> New in v2:
>  * DMA fixed.
>  * updated docs (kconfig, file comment, commit message) clarifying
>    the two sd controller situation.
>  * some code cleanups, as pointed out by Stefan.
>  * dt bindings use mmc@... now.
>  * added patches to update defconfigs.
>  * added patch for rpi3 device tree, so wifi is actually enabled.
>
> please review & test,
>   Gerd
>
> Eric Anholt (2):
>   dt-bindings: Add binding for brcm,bcm2835-sdhost.
>   mmc: bcm2835: Add new driver for the sdhost controller.
>
> Gerd Hoffmann (5):
>   mmc: bcm2835: add sdhost controller to devicetree
>   arm: set CONFIG_MMC_BCM2835=y in bcm2835_defconfig and
>     multi_v7_defconfig
>   arm64: set CONFIG_MMC_BCM2835=y in defconfig
>   arm: dts: bcm283x: switch from &sdhci to &sdhost
>   arm64: dts: bcm2837: add &sdhci and &sdhost
>
>  .../bindings/mmc/brcm,bcm2835-sdhost.txt           |   23 +
>  arch/arm/boot/dts/bcm2835-rpi.dtsi                 |    6 +
>  arch/arm/boot/dts/bcm283x.dtsi                     |   10 +
>  arch/arm/configs/bcm2835_defconfig                 |    1 +
>  arch/arm/configs/multi_v7_defconfig                |    1 +
>  arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts   |   17 +
>  arch/arm64/configs/defconfig                       |    1 +
>  drivers/mmc/host/Kconfig                           |   14 +
>  drivers/mmc/host/Makefile                          |    1 +
>  drivers/mmc/host/bcm2835.c                         | 1465 ++++++++++++++++++++
>  10 files changed, 1539 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
>  create mode 100644 drivers/mmc/host/bcm2835.c
>
> --
> 1.8.3.1
>

Thanks, applied patch1 and patch2 from the series.

Kind regards
Uffe

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web