Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1599202 > unrolled thread
| Started by | James Hogan <james.hogan@imgtec.com> |
|---|---|
| First post | 2017-03-13 12:00 +0100 |
| Last post | 2017-03-13 17:50 +0100 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH] MIPS: BPF: Add support for SKF_AD_HATYPE James Hogan <james.hogan@imgtec.com> - 2017-03-13 12:00 +0100
Re: [PATCH] MIPS: BPF: Add support for SKF_AD_HATYPE David Daney <ddaney.cavm@gmail.com> - 2017-03-13 17:50 +0100
| From | James Hogan <james.hogan@imgtec.com> |
|---|---|
| Date | 2017-03-13 12:00 +0100 |
| Subject | Re: [PATCH] MIPS: BPF: Add support for SKF_AD_HATYPE |
| Message-ID | <tkvRL-7Mz-3@gated-at.bofh.it> |
[Multipart message — attachments visible in raw view] — view raw
On Fri, Mar 10, 2017 at 02:14:05PM -0800, David Daney wrote:
> This let's us pass some additional "modprobe test-bpf" tests.
>
> Reuse the code for SKF_AD_IFINDEX, but substitute the offset and size
> of the "type" field.
>
> Signed-off-by: David Daney <david.daney@cavium.com>
I think the BPF maintainers should probably be Cc'd on this patch.
Cc'ing now.
> ---
> arch/mips/net/bpf_jit.c | 14 ++++++++++----
> 1 file changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c
> index 49a2e22..f613708 100644
> --- a/arch/mips/net/bpf_jit.c
> +++ b/arch/mips/net/bpf_jit.c
> @@ -1111,6 +1111,7 @@ static int build_body(struct jit_ctx *ctx)
> emit_load(r_A, 28, off, ctx);
> break;
> case BPF_ANC | SKF_AD_IFINDEX:
> + case BPF_ANC | SKF_AD_HATYPE:
> /* A = skb->dev->ifindex */
this comment should probably be updated.
> ctx->flags |= SEEN_SKB | SEEN_A;
> off = offsetof(struct sk_buff, dev);
> @@ -1120,10 +1121,15 @@ static int build_body(struct jit_ctx *ctx)
> emit_bcond(MIPS_COND_EQ, r_s0, r_zero,
> b_imm(prog->len, ctx), ctx);
> emit_reg_move(r_ret, r_zero, ctx);
> - BUILD_BUG_ON(FIELD_SIZEOF(struct net_device,
> - ifindex) != 4);
> - off = offsetof(struct net_device, ifindex);
> - emit_load(r_A, r_s0, off, ctx);
> + if (code == (BPF_ANC | SKF_AD_IFINDEX)) {
> + BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, ifindex) != 4);
> + off = offsetof(struct net_device, ifindex);
> + emit_load(r_A, r_s0, off, ctx);
> + } else { /* (code == (BPF_ANC | SKF_AD_HATYPE) */
> + BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, type) != 2);
> + off = offsetof(struct net_device, type);
> + emit_half_load(r_A, r_s0, off, ctx);
Technically net_device::type is unsigned, and emit_half_load uses LH
which sign extends. Does that matter in practice.
Cheers
James
[toc] | [next] | [standalone]
| From | David Daney <ddaney.cavm@gmail.com> |
|---|---|
| Date | 2017-03-13 17:50 +0100 |
| Message-ID | <tkBku-3fs-29@gated-at.bofh.it> |
| In reply to | #1599202 |
On 03/13/2017 03:56 AM, James Hogan wrote:
> On Fri, Mar 10, 2017 at 02:14:05PM -0800, David Daney wrote:
>> This let's us pass some additional "modprobe test-bpf" tests.
>>
>> Reuse the code for SKF_AD_IFINDEX, but substitute the offset and size
>> of the "type" field.
>>
>> Signed-off-by: David Daney <david.daney@cavium.com>
>
> I think the BPF maintainers should probably be Cc'd on this patch.
> Cc'ing now.
>
Good point.
Since there are some corrections needed, I will send another version and
CC the proper people.
>> ---
>> arch/mips/net/bpf_jit.c | 14 ++++++++++----
>> 1 file changed, 10 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c
>> index 49a2e22..f613708 100644
>> --- a/arch/mips/net/bpf_jit.c
>> +++ b/arch/mips/net/bpf_jit.c
>> @@ -1111,6 +1111,7 @@ static int build_body(struct jit_ctx *ctx)
>> emit_load(r_A, 28, off, ctx);
>> break;
>> case BPF_ANC | SKF_AD_IFINDEX:
>> + case BPF_ANC | SKF_AD_HATYPE:
>> /* A = skb->dev->ifindex */
>
> this comment should probably be updated.
Right.
>
>> ctx->flags |= SEEN_SKB | SEEN_A;
>> off = offsetof(struct sk_buff, dev);
>> @@ -1120,10 +1121,15 @@ static int build_body(struct jit_ctx *ctx)
>> emit_bcond(MIPS_COND_EQ, r_s0, r_zero,
>> b_imm(prog->len, ctx), ctx);
>> emit_reg_move(r_ret, r_zero, ctx);
>> - BUILD_BUG_ON(FIELD_SIZEOF(struct net_device,
>> - ifindex) != 4);
>> - off = offsetof(struct net_device, ifindex);
>> - emit_load(r_A, r_s0, off, ctx);
>> + if (code == (BPF_ANC | SKF_AD_IFINDEX)) {
>> + BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, ifindex) != 4);
>> + off = offsetof(struct net_device, ifindex);
>> + emit_load(r_A, r_s0, off, ctx);
>> + } else { /* (code == (BPF_ANC | SKF_AD_HATYPE) */
>> + BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, type) != 2);
>> + off = offsetof(struct net_device, type);
>> + emit_half_load(r_A, r_s0, off, ctx);
>
> Technically net_device::type is unsigned, and emit_half_load uses LH
> which sign extends. Does that matter in practice.
The next version will use LHU.
>
> Cheers
> James
>
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web