Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1600793 > unrolled thread

Re: [PATCH v5 15/39] [media] v4l2: add a frame interval error event

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH v5 15/39] [media] v4l2: add a frame interval error event Pavel Machek <pavel@ucw.cz> - 2017-03-14 19:30 +0100

#1600793 — Re: [PATCH v5 15/39] [media] v4l2: add a frame interval error event

[Multipart message — attachments visible in raw view] — view raw

On Mon 2017-03-13 10:45:38, Russell King - ARM Linux wrote:
> On Mon, Mar 13, 2017 at 11:02:34AM +0100, Hans Verkuil wrote:
> > On 03/11/2017 07:14 PM, Steve Longerbeam wrote:
> > > The event must be user visible, otherwise the user has no indication
> > > the error, and can't correct it by stream restart.
> > 
> > In that case the driver can detect this and call vb2_queue_error. It's
> > what it is there for.
> > 
> > The event doesn't help you since only this driver has this issue. So nobody
> > will watch this event, unless it is sw specifically written for this SoC.
> > 
> > Much better to call vb2_queue_error to signal a fatal error (which this
> > apparently is) since there are more drivers that do this, and vivid supports
> > triggering this condition as well.
> 
> So today, I can fiddle around with the IMX219 registers to help gain
> an understanding of how this sensor works.  Several of the registers
> (such as the PLL setup [*]) require me to disable streaming on the
> sensor while changing them.
> 
> This is something I've done many times while testing various ideas,
> and is my primary way of figuring out and testing such things.
> 
> Whenever I resume streaming (provided I've let the sensor stop
> streaming at a frame boundary) it resumes as if nothing happened.  If I
> stop the sensor mid-frame, then I get the rolling issue that Steve
> reports, but once the top of the frame becomes aligned with the top of
> the capture, everything then becomes stable again as if nothing happened.
> 
> The side effect of what you're proposing is that when I disable streaming
> at the sensor by poking at its registers, rather than the capture just
> stopping, an error is going to be delivered to gstreamer, and gstreamer
> is going to exit, taking the entire capture process down.
> 
> This severely restricts the ability to be able to develop and test
> sensor drivers.

Well, but kernel should do what is best for production, not what is
best for driver debugging.

And yes, I guess you can have #ifdef or module parameter or something
switching for behaviour you prefer when you are debugging. But for
production, vb2_queue_error() seems to be the right solution.

								Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web