Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1596144 > unrolled thread
| Started by | Romain Izard <romain.izard.pro@gmail.com> |
|---|---|
| First post | 2017-03-09 16:20 +0100 |
| Last post | 2017-03-16 15:50 +0100 |
| Articles | 4 — 3 participants |
Back to article view | Back to linux.kernel
[PATCH] mmc: sdhci-of-at91: Support external regulators Romain Izard <romain.izard.pro@gmail.com> - 2017-03-09 16:20 +0100
Re: [PATCH] mmc: sdhci-of-at91: Support external regulators Ludovic Desroches <ludovic.desroches@microchip.com> - 2017-03-10 14:40 +0100
Re: [PATCH] mmc: sdhci-of-at91: Support external regulators Ludovic Desroches <ludovic.desroches@microchip.com> - 2017-03-14 14:10 +0100
Re: [PATCH] mmc: sdhci-of-at91: Support external regulators Ulf Hansson <ulf.hansson@linaro.org> - 2017-03-16 15:50 +0100
| From | Romain Izard <romain.izard.pro@gmail.com> |
|---|---|
| Date | 2017-03-09 16:20 +0100 |
| Subject | [PATCH] mmc: sdhci-of-at91: Support external regulators |
| Message-ID | <tj81c-6XD-7@gated-at.bofh.it> |
The SDHCI controller in the SAMA5D2 chip requires a valid voltage set
in the power control register, otherwise commands will fail with a
timeout error.
When using the regulator framework to specify the regulator used by the
mmc device, the voltage is not configured, and it is not possible to use
the connected device.
Implement a custom 'set_power' function for this specific hardware, that
configures the voltage in the register in all cases.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
---
drivers/mmc/host/sdhci-of-at91.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index 2f9ad213377a..291a74955a4c 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -85,11 +85,30 @@ static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
}
+/*
+ * In this specific implementation of the SDHCI contoller, the power register
+ * needs to have a valid voltage set even when the power supply is managed by
+ * an external regulator.
+ */
+static void sdhci_at91_set_power(struct sdhci_host *host, unsigned char mode,
+ unsigned short vdd)
+{
+ if (!IS_ERR(host->mmc->supply.vmmc)) {
+ struct mmc_host *mmc = host->mmc;
+
+ spin_unlock_irq(&host->lock);
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ spin_lock_irq(&host->lock);
+ }
+ sdhci_set_power_noreg(host, mode, vdd);
+}
+
static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
.set_clock = sdhci_at91_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
+ .set_power = sdhci_at91_set_power,
};
static const struct sdhci_pltfm_data soc_data_sama5d2 = {
--
2.9.3
[toc] | [next] | [standalone]
| From | Ludovic Desroches <ludovic.desroches@microchip.com> |
|---|---|
| Date | 2017-03-10 14:40 +0100 |
| Message-ID | <tjsW0-4FY-69@gated-at.bofh.it> |
| In reply to | #1596144 |
Hi Romain,
On 03/09/2017 04:18 PM, Romain Izard wrote:
> The SDHCI controller in the SAMA5D2 chip requires a valid voltage set
> in the power control register, otherwise commands will fail with a
> timeout error.
>
> When using the regulator framework to specify the regulator used by the
> mmc device, the voltage is not configured, and it is not possible to use
> the connected device.
>
It's true, I proposed some patches long time ago to change a bit the
behavior of the sdhci_set_power function but we didn't agree and so I
didn't declare the regulator.
> Implement a custom 'set_power' function for this specific hardware, that
> configures the voltage in the register in all cases.
>
I don't remember if the set_power ops was available at that time. If
yes, I would have thought about it. IMO it's a nice solution.
> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
> ---
> drivers/mmc/host/sdhci-of-at91.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
> index 2f9ad213377a..291a74955a4c 100644
> --- a/drivers/mmc/host/sdhci-of-at91.c
> +++ b/drivers/mmc/host/sdhci-of-at91.c
> @@ -85,11 +85,30 @@ static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
> sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> }
>
> +/*
> + * In this specific implementation of the SDHCI contoller, the power register
controller
Regards
Ludovic
> + * needs to have a valid voltage set even when the power supply is managed by
> + * an external regulator.
> + */
> +static void sdhci_at91_set_power(struct sdhci_host *host, unsigned char mode,
> + unsigned short vdd)
> +{
> + if (!IS_ERR(host->mmc->supply.vmmc)) {
> + struct mmc_host *mmc = host->mmc;
> +
> + spin_unlock_irq(&host->lock);
> + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
> + spin_lock_irq(&host->lock);
> + }
> + sdhci_set_power_noreg(host, mode, vdd);
> +}
> +
> static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
> .set_clock = sdhci_at91_set_clock,
> .set_bus_width = sdhci_set_bus_width,
> .reset = sdhci_reset,
> .set_uhs_signaling = sdhci_set_uhs_signaling,
> + .set_power = sdhci_at91_set_power,
> };
>
> static const struct sdhci_pltfm_data soc_data_sama5d2 = {
>
[toc] | [prev] | [next] | [standalone]
| From | Ludovic Desroches <ludovic.desroches@microchip.com> |
|---|---|
| Date | 2017-03-14 14:10 +0100 |
| Message-ID | <tkUn8-x2-25@gated-at.bofh.it> |
| In reply to | #1596144 |
On Thu, Mar 09, 2017 at 04:18:20PM +0100, Romain Izard wrote:
> The SDHCI controller in the SAMA5D2 chip requires a valid voltage set
> in the power control register, otherwise commands will fail with a
> timeout error.
>
> When using the regulator framework to specify the regulator used by the
> mmc device, the voltage is not configured, and it is not possible to use
> the connected device.
>
> Implement a custom 'set_power' function for this specific hardware, that
> configures the voltage in the register in all cases.
>
> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Cc: stable@vger.kernel.org #4.9+
Can be added since sdhci_set_power_noreg was introduced in 4.9.
> ---
> drivers/mmc/host/sdhci-of-at91.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
> index 2f9ad213377a..291a74955a4c 100644
> --- a/drivers/mmc/host/sdhci-of-at91.c
> +++ b/drivers/mmc/host/sdhci-of-at91.c
> @@ -85,11 +85,30 @@ static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
> sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> }
>
> +/*
> + * In this specific implementation of the SDHCI contoller, the power register
> + * needs to have a valid voltage set even when the power supply is managed by
> + * an external regulator.
> + */
> +static void sdhci_at91_set_power(struct sdhci_host *host, unsigned char mode,
> + unsigned short vdd)
> +{
> + if (!IS_ERR(host->mmc->supply.vmmc)) {
> + struct mmc_host *mmc = host->mmc;
> +
> + spin_unlock_irq(&host->lock);
> + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
> + spin_lock_irq(&host->lock);
> + }
> + sdhci_set_power_noreg(host, mode, vdd);
> +}
> +
> static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
> .set_clock = sdhci_at91_set_clock,
> .set_bus_width = sdhci_set_bus_width,
> .reset = sdhci_reset,
> .set_uhs_signaling = sdhci_set_uhs_signaling,
> + .set_power = sdhci_at91_set_power,
> };
>
> static const struct sdhci_pltfm_data soc_data_sama5d2 = {
> --
> 2.9.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
[toc] | [prev] | [next] | [standalone]
| From | Ulf Hansson <ulf.hansson@linaro.org> |
|---|---|
| Date | 2017-03-16 15:50 +0100 |
| Message-ID | <tlET1-88W-51@gated-at.bofh.it> |
| In reply to | #1600320 |
+ stable
On 14 March 2017 at 14:06, Ludovic Desroches
<ludovic.desroches@microchip.com> wrote:
> On Thu, Mar 09, 2017 at 04:18:20PM +0100, Romain Izard wrote:
>> The SDHCI controller in the SAMA5D2 chip requires a valid voltage set
>> in the power control register, otherwise commands will fail with a
>> timeout error.
>>
>> When using the regulator framework to specify the regulator used by the
>> mmc device, the voltage is not configured, and it is not possible to use
>> the connected device.
>>
>> Implement a custom 'set_power' function for this specific hardware, that
>> configures the voltage in the register in all cases.
>>
>> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Thanks, applied for fixes and by correcting a "contoller" to
"controller" as pointed out by Ludovic.
Kind regards
Uffe
>
> Cc: stable@vger.kernel.org #4.9+
>
> Can be added since sdhci_set_power_noreg was introduced in 4.9.
>
>> ---
>> drivers/mmc/host/sdhci-of-at91.c | 19 +++++++++++++++++++
>> 1 file changed, 19 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
>> index 2f9ad213377a..291a74955a4c 100644
>> --- a/drivers/mmc/host/sdhci-of-at91.c
>> +++ b/drivers/mmc/host/sdhci-of-at91.c
>> @@ -85,11 +85,30 @@ static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
>> sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
>> }
>>
>> +/*
>> + * In this specific implementation of the SDHCI contoller, the power register
>> + * needs to have a valid voltage set even when the power supply is managed by
>> + * an external regulator.
>> + */
>> +static void sdhci_at91_set_power(struct sdhci_host *host, unsigned char mode,
>> + unsigned short vdd)
>> +{
>> + if (!IS_ERR(host->mmc->supply.vmmc)) {
>> + struct mmc_host *mmc = host->mmc;
>> +
>> + spin_unlock_irq(&host->lock);
>> + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
>> + spin_lock_irq(&host->lock);
>> + }
>> + sdhci_set_power_noreg(host, mode, vdd);
>> +}
>> +
>> static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
>> .set_clock = sdhci_at91_set_clock,
>> .set_bus_width = sdhci_set_bus_width,
>> .reset = sdhci_reset,
>> .set_uhs_signaling = sdhci_set_uhs_signaling,
>> + .set_power = sdhci_at91_set_power,
>> };
>>
>> static const struct sdhci_pltfm_data soc_data_sama5d2 = {
>> --
>> 2.9.3
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web