Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1595450 > unrolled thread

[PATCH v3 0/2] Enable mss rproc support on msm8996

Back to article view | Back to linux.kernel

Contents

  [PATCH v3 0/2] Enable mss rproc support on msm8996 Avaneesh Kumar Dwivedi <akdwived@codeaurora.org> - 2017-03-08 20:00 +0100
    [PATCH v3 2/2] remoteproc: qcom: Enable mss rproc support on msm8996 Avaneesh Kumar Dwivedi <akdwived@codeaurora.org> - 2017-03-08 20:00 +0100

#1595450 — [PATCH v3 0/2] Enable mss rproc support on msm8996

This Patch series fix the comment received on v2 patchset.
Major changes w.r.t. patchset v2 is as below.
	1- move majority of hypervisor call related changes into scm driver
	   which were earlier in q6v5 rproc driver, which was not compatible 
	   to existing design.
	2- remove voting for proxy supplies till the time corner voting is supported.
	   Though testing of mss rproc driver is possible as cx and mx supplies are 
	   in always power on domain.
	3- Fix some other Minor comments.

This patchseries is based on Bjorns remoteproc git repository at:

  git://github.com/andersson/remoteproc tags/rproc-v4.11

or to say this patchset is based on top of commit id 01625cc5e65f420dbea57f7de6b9552a0f807a84
in Bjorn's git repo.

Avaneesh Kumar Dwivedi (2):
  soc: qcom: Add support of scm call for mss rproc to share access of
    ddr
  remoteproc: qcom: Enable mss rproc support on msm8996

 .../devicetree/bindings/remoteproc/qcom,q6v5.txt   |   1 +
 drivers/firmware/qcom_scm-64.c                     |  25 ++
 drivers/firmware/qcom_scm.c                        |  93 +++++++
 drivers/firmware/qcom_scm.h                        |   3 +
 drivers/remoteproc/qcom_q6v5_pil.c                 | 290 +++++++++++++++++++--
 include/linux/qcom_scm.h                           |  14 +
 6 files changed, 400 insertions(+), 26 deletions(-)

-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.

[toc] | [next] | [standalone]

#1595452 — [PATCH v3 2/2] remoteproc: qcom: Enable mss rproc support on msm8996

This patch add msm8996 mss reset sequence and other minor
changes for enabling mss rproc support.

Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
---
 .../devicetree/bindings/remoteproc/qcom,q6v5.txt   |   1 +
 drivers/remoteproc/qcom_q6v5_pil.c                 | 161 ++++++++++++++++++---
 2 files changed, 138 insertions(+), 24 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 92347fe..f37b0da 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -10,6 +10,7 @@ on the Qualcomm Hexagon core.
 		    "qcom,q6v5-pil",
 		    "qcom,msm8916-mss-pil",
 		    "qcom,msm8974-mss-pil"
+		"qcom,msm8996-mss-pil"
 
 - reg:
 	Usage: required
diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index 62ad976..1676cd7 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -32,6 +32,7 @@
 #include <linux/soc/qcom/mdt_loader.h>
 #include <linux/soc/qcom/smem.h>
 #include <linux/soc/qcom/smem_state.h>
+#include <linux/iopoll.h>
 
 #include "remoteproc_internal.h"
 #include "qcom_common.h"
@@ -64,6 +65,8 @@
 #define QDSP6SS_RESET_REG		0x014
 #define QDSP6SS_GFMUX_CTL_REG		0x020
 #define QDSP6SS_PWR_CTL_REG		0x030
+#define QDSP6SS_MEM_PWR_CTL		0x0B0
+#define QDSP6SS_STRAP_ACC		0x110
 
 /* AXI Halt Register Offsets */
 #define AXI_HALTREQ_REG			0x0
@@ -92,6 +95,14 @@
 #define QDSS_BHS_ON			BIT(21)
 #define QDSS_LDO_BYP			BIT(22)
 
+/* QDSP6v56 parameters */
+#define QDSP6v56_LDO_BYP		BIT(25)
+#define QDSP6v56_BHS_ON		BIT(24)
+#define QDSP6v56_CLAMP_WL		BIT(21)
+#define QDSP6v56_CLAMP_QMC_MEM		BIT(22)
+#define HALT_CHECK_MAX_LOOPS		200
+#define QDSP6SS_XO_CBCR		0x0038
+#define QDSP6SS_ACC_OVERRIDE_VAL		0x20
 struct reg_info {
 	struct regulator *reg;
 	int uV;
@@ -421,33 +432,97 @@ static int q6v5proc_reset(struct q6v5 *qproc)
 {
 	u32 val;
 	int ret;
+	int i;
 
-	/* Assert resets, stop core */
-	val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
-	val |= (Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE);
-	writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
 
-	/* Enable power block headswitch, and wait for it to stabilize */
-	val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
-	val |= QDSS_BHS_ON | QDSS_LDO_BYP;
-	writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
-	udelay(1);
-
-	/*
-	 * Turn on memories. L2 banks should be done individually
-	 * to minimize inrush current.
-	 */
-	val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
-	val |= Q6SS_SLP_RET_N | Q6SS_L2TAG_SLP_NRET_N |
-		Q6SS_ETB_SLP_NRET_N | Q6SS_L2DATA_STBY_N;
-	writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
-	val |= Q6SS_L2DATA_SLP_NRET_N_2;
-	writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
-	val |= Q6SS_L2DATA_SLP_NRET_N_1;
-	writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
-	val |= Q6SS_L2DATA_SLP_NRET_N_0;
-	writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+	if (qproc->version == MSS_MSM8996) {
+		/* Override the ACC value if required */
+		writel(QDSP6SS_ACC_OVERRIDE_VAL,
+			qproc->reg_base + QDSP6SS_STRAP_ACC);
+
+		/* Assert resets, stop core */
+		val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
+		val |= Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE;
+		writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
 
+		/* BHS require xo cbcr to be enabled */
+		val = readl(qproc->reg_base + QDSP6SS_XO_CBCR);
+		val |= 0x1;
+		writel(val, qproc->reg_base + QDSP6SS_XO_CBCR);
+
+		/* Read CLKOFF bit to go low indicating CLK is enabled */
+		ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_XO_CBCR,
+				val, !(val & BIT(31)), 1, HALT_CHECK_MAX_LOOPS);
+		if (ret) {
+			dev_err(qproc->dev,
+				"xo cbcr enabling timed out (rc:%d)\n", ret);
+			return ret;
+		}
+		/* Enable power block headswitch and wait for it to stabilize */
+		val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+		val |= QDSP6v56_BHS_ON;
+		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+		val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+		udelay(1);
+
+		/* Put LDO in bypass mode */
+		val |= QDSP6v56_LDO_BYP;
+		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+
+		/* Deassert QDSP6 compiler memory clamp */
+		val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+		val &= ~QDSP6v56_CLAMP_QMC_MEM;
+		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+
+		/* Deassert memory peripheral sleep and L2 memory standby */
+		val |= Q6SS_L2DATA_STBY_N | Q6SS_SLP_RET_N;
+		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+
+		/* Turn on L1, L2, ETB and JU memories 1 at a time */
+		val = readl(qproc->reg_base + QDSP6SS_MEM_PWR_CTL);
+		for (i = 19; i >= 0; i--) {
+			val |= BIT(i);
+			writel(val, qproc->reg_base +
+						QDSP6SS_MEM_PWR_CTL);
+			/*
+			 * Read back value to ensure the write is done then
+			 * wait for 1us for both memory peripheral and data
+			 * array to turn on.
+			 */
+			val |= readl(qproc->reg_base + QDSP6SS_MEM_PWR_CTL);
+			udelay(1);
+		}
+		/* Remove word line clamp */
+		val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+		val &= ~QDSP6v56_CLAMP_WL;
+		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+	} else {
+		/* Assert resets, stop core */
+		val = readl(qproc->reg_base + QDSP6SS_RESET_REG);
+		val |= Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE;
+		writel(val, qproc->reg_base + QDSP6SS_RESET_REG);
+
+		/* Enable power block headswitch and wait for it to stabilize */
+		val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+		val |= QDSS_BHS_ON | QDSS_LDO_BYP;
+		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+		val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+		udelay(1);
+		/*
+		 * Turn on memories. L2 banks should be done individually
+		 * to minimize inrush current.
+		 */
+		val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+		val |= Q6SS_SLP_RET_N | Q6SS_L2TAG_SLP_NRET_N |
+			Q6SS_ETB_SLP_NRET_N | Q6SS_L2DATA_STBY_N;
+		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+		val |= Q6SS_L2DATA_SLP_NRET_N_2;
+		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+		val |= Q6SS_L2DATA_SLP_NRET_N_1;
+		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+		val |= Q6SS_L2DATA_SLP_NRET_N_0;
+		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+	}
 	/* Remove IO clamp */
 	val &= ~Q6SS_CLAMP_IO;
 	writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
@@ -823,6 +898,7 @@ static int q6v5_stop(struct rproc *rproc)
 {
 	struct q6v5 *qproc = (struct q6v5 *)rproc->priv;
 	int ret;
+	u32 val;
 
 	qproc->running = false;
 
@@ -840,6 +916,15 @@ static int q6v5_stop(struct rproc *rproc)
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
 
+	if (qproc->version == MSS_MSM8996) {
+		/*
+		 * To avoid high MX current during LPASS/MSS restart.
+		 */
+		val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+		val |= Q6SS_CLAMP_IO | QDSP6v56_CLAMP_WL |
+			QDSP6v56_CLAMP_QMC_MEM;
+		writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+	}
 	reset_control_assert(qproc->mss_restart);
 	q6v5_clk_disable(qproc->dev, qproc->active_clks,
 			 qproc->active_clk_count);
@@ -1186,6 +1271,33 @@ static int q6v5_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct rproc_hexagon_res msm8996_mss = {
+	.hexagon_mba_image = "mba.mbn",
+	.proxy_supply = (struct qcom_mss_reg_res[]) {
+			{}
+	},
+	.active_supply = (struct qcom_mss_reg_res[]) {
+			{},
+			{}
+	},
+	.proxy_clk_names = (char*[]){
+			"xo",
+			"pnoc",
+			"qdss",
+			NULL
+	},
+	.active_clk_names = (char*[]){
+			"iface",
+			"bus",
+			"mem",
+			"gpll0_mss_clk",
+			"snoc_axi_clk",
+			"mnoc_axi_clk",
+			NULL
+	},
+	.version = MSS_MSM8996,
+};
+
 static const struct rproc_hexagon_res msm8916_mss = {
 	.hexagon_mba_image = "mba.mbn",
 	.proxy_supply = (struct qcom_mss_reg_res[]) {
@@ -1258,6 +1370,7 @@ static int q6v5_remove(struct platform_device *pdev)
 	{ .compatible = "qcom,q6v5-pil", .data = &msm8916_mss},
 	{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
 	{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
+	{ .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, q6v5_of_match);
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web