Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1590462 > unrolled thread

[RESEND PATCH v6 0/6] i2c: designware: add I2C SLAVE support

Started byLuis Oliveira <Luis.Oliveira@synopsys.com>
First post2017-03-01 17:20 +0100
Last post2017-03-02 17:00 +0100
Articles 10 — 2 participants

Back to article view | Back to linux.kernel

Contents

  [RESEND PATCH v6 0/6] i2c: designware: add I2C SLAVE support Luis Oliveira <Luis.Oliveira@synopsys.com> - 2017-03-01 17:20 +0100
    [RESEND PATCH v6 1/6] i2c: designware: Cleaning and comment style fixes. Luis Oliveira <Luis.Oliveira@synopsys.com> - 2017-03-01 17:20 +0100
    [RESEND PATCH v6 4/6] i2c: designware: introducing I2C_SLAVE definitions Luis Oliveira <Luis.Oliveira@synopsys.com> - 2017-03-01 17:20 +0100
      Re: [RESEND PATCH v6 4/6] i2c: designware: introducing I2C_SLAVE  definitions Jarkko Nikula <jarkko.nikula@linux.intel.com> - 2017-03-02 15:00 +0100
    [RESEND PATCH v6 6/6] i2c: designware: enable SLAVE in platform module Luis Oliveira <Luis.Oliveira@synopsys.com> - 2017-03-01 17:20 +0100
    [RESEND PATCH v6 2/6] i2c: designware: refactoring of the i2c-designware Luis Oliveira <Luis.Oliveira@synopsys.com> - 2017-03-01 17:20 +0100
      Re: [RESEND PATCH v6 2/6] i2c: designware: refactoring of the  i2c-designware Jarkko Nikula <jarkko.nikula@linux.intel.com> - 2017-03-02 15:00 +0100
    [RESEND PATCH v6 5/6] i2c: designware: add SLAVE mode functions Luis Oliveira <Luis.Oliveira@synopsys.com> - 2017-03-01 17:20 +0100
      Re: [RESEND PATCH v6 5/6] i2c: designware: add SLAVE mode functions Jarkko Nikula <jarkko.nikula@linux.intel.com> - 2017-03-02 16:00 +0100
        Re: [RESEND PATCH v6 5/6] i2c: designware: add SLAVE mode functions Luis Oliveira <Luis.Oliveira@synopsys.com> - 2017-03-02 17:00 +0100

#1590462 — [RESEND PATCH v6 0/6] i2c: designware: add I2C SLAVE support

FromLuis Oliveira <Luis.Oliveira@synopsys.com>
Date2017-03-01 17:20 +0100
Subject[RESEND PATCH v6 0/6] i2c: designware: add I2C SLAVE support
Message-ID<tgf8S-5xo-3@gated-at.bofh.it>
The purpose of this patchset is to enable Linux to be a I2C slave by 
enabling the slave functionality in the designware I2C controller and at
the same time it does some cleaning of the existing code.

The patch 1 is for cleaning and commentary fix.
The patch 2 refactors the original i2c-designware-core and extracts all
master functions to a i2c-designware-master source file as suggested by
Andy Shevchenko when I first submited the update. The patch 3 then
separates the MASTER flow from the common flow.
The patch 4 introduces the SLAVE necessary definitions to the 
i2c-designware library and adds a how-to-use example to the designware.txt
in device tree bindings.
The patch 5 adds the necessary functions to give the ability to be a SLAVE
to the controller and for that changes also had to be made in the 
Makefile and Kconfig.
The patch 6 enables the SLAVE mode to be detected by the platform module.

The functionality was tested using the hardware independent slave-eeprom
driver based on top of i2c/for-next. The tree I used can be found here:

https://git.kernel.org/cgit/linux/kernel/git/wsa/linux.git/log/?h=i2c/for-next

Luis Oliveira (6):
  i2c: designware: Cleaning and comment style fixes.
  i2c: designware: refactoring of the i2c-designware
  i2c: designware: MASTER mode as separated driver
  i2c: designware: introducing I2C_SLAVE definitions
  i2c: designware: add SLAVE mode functions
  i2c: designware: enable SLAVE in platform module

 .../devicetree/bindings/i2c/i2c-designware.txt     |  16 +-
 drivers/i2c/busses/Kconfig                         |  15 +-
 drivers/i2c/busses/Makefile                        |   2 +
 drivers/i2c/busses/i2c-designware-common.c         | 281 ++++++++++++
 drivers/i2c/busses/i2c-designware-core.h           | 180 +++++++-
 ...c-designware-core.c => i2c-designware-master.c} | 469 +++------------------
 drivers/i2c/busses/i2c-designware-platdrv.c        | 116 +++--
 drivers/i2c/busses/i2c-designware-slave.c          | 403 ++++++++++++++++++
 8 files changed, 1031 insertions(+), 451 deletions(-)
 create mode 100644 drivers/i2c/busses/i2c-designware-common.c
 rename drivers/i2c/busses/{i2c-designware-core.c => i2c-designware-master.c} (59%)
 create mode 100644 drivers/i2c/busses/i2c-designware-slave.c

-- 
2.11.0

[toc] | [next] | [standalone]

#1590468 — [RESEND PATCH v6 1/6] i2c: designware: Cleaning and comment style fixes.

FromLuis Oliveira <Luis.Oliveira@synopsys.com>
Date2017-03-01 17:20 +0100
Subject[RESEND PATCH v6 1/6] i2c: designware: Cleaning and comment style fixes.
Message-ID<tgf8T-5xo-29@gated-at.bofh.it>
In reply to#1590462
The purpose of this commit is to fix some comments and styling in the
existing code due to the need of reuse this code. What is being made
here is:

- Sorted the headers files
- Corrected some comments style (capital letters, lowcase i2c)
- Reverse tree in the variables declaration
- Add/remove empty lines and tabs where needed
- Fix of misspelled word "endianness" and "transferred"
- Replaced the return variable "r" with the more standard "ret"

The value of this, besides the rules of coding style, is because I
will use this code after and it will make my future patch a lot bigger and
complicated to review. The work here won't bring any additional work to
backported fixes because is just style and reordering.

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
- Added the replacement of "r" for "ret" return variables, before it
  was done in the 7th patch
 
 drivers/i2c/busses/i2c-designware-core.c    | 80 ++++++++++++++---------------
 drivers/i2c/busses/i2c-designware-core.h    |  2 +-
 drivers/i2c/busses/i2c-designware-platdrv.c | 42 +++++++--------
 3 files changed, 63 insertions(+), 61 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 7a3faa551cf8..46937865ef8f 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -21,17 +21,17 @@
  * ----------------------------------------------------------------------------
  *
  */
+#include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <linux/delay.h>
 #include <linux/module.h>
-#include "i2c-designware-core.h"
+#include <linux/pm_runtime.h>
 
+#include "i2c-designware-core.h"
 /*
  * Registers offset
  */
@@ -98,7 +98,7 @@
 
 #define DW_IC_ERR_TX_ABRT	0x1
 
-#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
+#define DW_IC_TAR_10BITADDR_MASTER		BIT(12)
 
 #define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH	(BIT(2) | BIT(3))
 #define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK	GENMASK(3, 2)
@@ -113,10 +113,10 @@
 #define TIMEOUT			20 /* ms */
 
 /*
- * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
+ * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
  *
- * only expected abort codes are listed here
- * refer to the datasheet for the full list
+ * Only expected abort codes are listed here,
+ * refer to the datasheet for the full list.
  */
 #define ABRT_7B_ADDR_NOACK	0
 #define ABRT_10ADDR1_NOACK	1
@@ -318,7 +318,7 @@ static void i2c_dw_release_lock(struct dw_i2c_dev *dev)
 }
 
 /**
- * i2c_dw_init() - initialize the designware i2c master hardware
+ * i2c_dw_init() - Initialize the designware I2C master hardware
  * @dev: device private data
  *
  * This functions configures and enables the I2C master.
@@ -338,14 +338,14 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 
 	reg = dw_readl(dev, DW_IC_COMP_TYPE);
 	if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
-		/* Configure register endianess access */
+		/* Configure register endianness access */
 		dev->accessor_flags |= ACCESS_SWAP;
 	} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
 		/* Configure register access mode 16bit */
 		dev->accessor_flags |= ACCESS_16BIT;
 	} else if (reg != DW_IC_COMP_TYPE_VALUE) {
-		dev_err(dev->dev, "Unknown Synopsys component type: "
-			"0x%08x\n", reg);
+		dev_err(dev->dev,
+			"Unknown Synopsys component type: 0x%08x\n", reg);
 		i2c_dw_release_lock(dev);
 		return -ENODEV;
 	}
@@ -355,7 +355,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	/* Disable the adapter */
 	__i2c_dw_enable_and_wait(dev, false);
 
-	/* set standard and fast speed deviders for high/low periods */
+	/* Set standard and fast speed deviders for high/low periods */
 
 	sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
 	scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
@@ -444,7 +444,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL);
 	dw_writel(dev, 0, DW_IC_RX_TL);
 
-	/* configure the i2c master */
+	/* Configure the I2C master */
 	dw_writel(dev, dev->master_cfg , DW_IC_CON);
 
 	i2c_dw_release_lock(dev);
@@ -480,7 +480,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 	/* Disable the adapter */
 	__i2c_dw_enable_and_wait(dev, false);
 
-	/* if the slave address is ten bit address, enable 10BITADDR */
+	/* If the slave address is ten bit address, enable 10BITADDR */
 	ic_con = dw_readl(dev, DW_IC_CON);
 	if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
 		ic_con |= DW_IC_CON_10BITADDR_MASTER;
@@ -503,7 +503,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 	 */
 	dw_writel(dev, msgs[dev->msg_write_idx].addr | ic_tar, DW_IC_TAR);
 
-	/* enforce disabled interrupts (due to HW issues) */
+	/* Enforce disabled interrupts (due to HW issues) */
 	i2c_dw_disable_int(dev);
 
 	/* Enable the adapter */
@@ -537,9 +537,9 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 		u32 flags = msgs[dev->msg_write_idx].flags;
 
 		/*
-		 * if target address has changed, we need to
-		 * reprogram the target address in the i2c
-		 * adapter when we are done with this transfer
+		 * If target address has changed, we need to
+		 * reprogram the target address in the I2C
+		 * adapter when we are done with this transfer.
 		 */
 		if (msgs[dev->msg_write_idx].addr != addr) {
 			dev_err(dev->dev,
@@ -599,7 +599,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 
 			if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
 
-				/* avoid rx buffer overrun */
+				/* Avoid rx buffer overrun */
 				if (dev->rx_outstanding >= dev->rx_fifo_depth)
 					break;
 
@@ -728,7 +728,7 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
 }
 
 /*
- * Prepare controller for a transaction and call i2c_dw_xfer_msg
+ * Prepare controller for a transaction and call i2c_dw_xfer_msg.
  */
 static int
 i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
@@ -759,10 +759,10 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	if (ret < 0)
 		goto done;
 
-	/* start the transfers */
+	/* Start the transfers */
 	i2c_dw_xfer_init(dev);
 
-	/* wait for tx to complete */
+	/* Wait for tx to complete */
 	if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
 		dev_err(dev->dev, "controller timed out\n");
 		/* i2c_dw_init implicitly disables the adapter */
@@ -786,7 +786,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 		goto done;
 	}
 
-	/* no error */
+	/* No error */
 	if (likely(!dev->cmd_err && !dev->status)) {
 		ret = num;
 		goto done;
@@ -821,8 +821,8 @@ static u32 i2c_dw_func(struct i2c_adapter *adap)
 }
 
 static const struct i2c_algorithm i2c_dw_algo = {
-	.master_xfer	= i2c_dw_xfer,
-	.functionality	= i2c_dw_func,
+	.master_xfer = i2c_dw_xfer,
+	.functionality = i2c_dw_func,
 };
 
 static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
@@ -903,7 +903,7 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 
 		/*
 		 * Anytime TX_ABRT is set, the contents of the tx/rx
-		 * buffers are flushed.  Make sure to skip them.
+		 * buffers are flushed. Make sure to skip them.
 		 */
 		dw_writel(dev, 0, DW_IC_INTR_MASK);
 		goto tx_aborted;
@@ -925,7 +925,7 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 	if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
 		complete(&dev->cmd_complete);
 	else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) {
-		/* workaround to trigger pending interrupt */
+		/* Workaround to trigger pending interrupt */
 		stat = dw_readl(dev, DW_IC_INTR_MASK);
 		i2c_dw_disable_int(dev);
 		dw_writel(dev, stat, DW_IC_INTR_MASK);
@@ -960,13 +960,13 @@ EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);
 int i2c_dw_probe(struct dw_i2c_dev *dev)
 {
 	struct i2c_adapter *adap = &dev->adapter;
-	int r;
-
+	int ret;
+	
 	init_completion(&dev->cmd_complete);
 
-	r = i2c_dw_init(dev);
-	if (r)
-		return r;
+	ret = i2c_dw_init(dev);
+	if (ret)
+		return ret;
 
 	snprintf(adap->name, sizeof(adap->name),
 		 "Synopsys DesignWare I2C adapter");
@@ -976,13 +976,13 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
 	i2c_set_adapdata(adap, dev);
 
 	i2c_dw_disable_int(dev);
-	r = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr,
+	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr,
 			     IRQF_SHARED | IRQF_COND_SUSPEND,
 			     dev_name(dev->dev), dev);
-	if (r) {
+	if (ret) {
 		dev_err(dev->dev, "failure requesting irq %i: %d\n",
-			dev->irq, r);
-		return r;
+			dev->irq, ret);
+		return ret;
 	}
 
 	/*
@@ -992,12 +992,12 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
 	 * registered I2C slaves that do I2C transfers in their probe.
 	 */
 	pm_runtime_get_noresume(dev->dev);
-	r = i2c_add_numbered_adapter(adap);
-	if (r)
-		dev_err(dev->dev, "failure adding adapter: %d\n", r);
+	ret = i2c_add_numbered_adapter(adap);
+	if (ret)
+		dev_err(dev->dev, "failure adding adapter: %d\n", ret);
 	pm_runtime_put_noidle(dev->dev);
 
-	return r;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(i2c_dw_probe);
 
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index c1db3a5a340f..1a010730be43 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -48,7 +48,7 @@
  * @cmd_complete: tx completion indicator
  * @clk: input reference clock
  * @cmd_err: run time hadware error code
- * @msgs: points to an array of messages currently being transfered
+ * @msgs: points to an array of messages currently being transferred
  * @msgs_num: the number of elements in msgs
  * @msg_write_idx: the element index of the current tx message in the msgs
  *	array
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 6ce431323125..381f0c1058b4 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -21,26 +21,28 @@
  * ----------------------------------------------------------------------------
  *
  */
-#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/dmi.h>
-#include <linux/i2c.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
 #include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/of.h>
+#include <linux/platform_data/i2c-designware.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
-#include <linux/io.h>
+#include <linux/reset.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/acpi.h>
-#include <linux/platform_data/i2c-designware.h>
+
 #include "i2c-designware-core.h"
 
 static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
@@ -176,11 +178,11 @@ static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev, int id)
 static int dw_i2c_plat_probe(struct platform_device *pdev)
 {
 	struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct dw_i2c_dev *dev;
 	struct i2c_adapter *adap;
-	struct resource *mem;
-	int irq, r;
+	struct dw_i2c_dev *dev;
 	u32 acpi_speed, ht = 0;
+	struct resource *mem;
+	int irq, ret;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
@@ -238,9 +240,9 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	r = i2c_dw_eval_lock_support(dev);
-	if (r)
-		return r;
+	ret = i2c_dw_eval_lock_support(dev);
+	if (ret)
+		return ret;
 
 	dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
 
@@ -285,11 +287,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 		pm_runtime_enable(&pdev->dev);
 	}
 
-	r = i2c_dw_probe(dev);
-	if (r && !dev->pm_runtime_disabled)
+	ret = i2c_dw_probe(dev);
+	if (ret && !dev->pm_runtime_disabled)
 		pm_runtime_disable(&pdev->dev);
 
-	return r;
+	return ret;
 }
 
 static int dw_i2c_plat_remove(struct platform_device *pdev)
@@ -371,7 +373,7 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
 #define DW_I2C_DEV_PMOPS NULL
 #endif
 
-/* work with hotplug and coldplug */
+/* Work with hotplug and coldplug */
 MODULE_ALIAS("platform:i2c_designware");
 
 static struct platform_driver dw_i2c_driver = {
-- 
2.11.0

[toc] | [prev] | [next] | [standalone]

#1590472 — [RESEND PATCH v6 4/6] i2c: designware: introducing I2C_SLAVE definitions

FromLuis Oliveira <Luis.Oliveira@synopsys.com>
Date2017-03-01 17:20 +0100
Subject[RESEND PATCH v6 4/6] i2c: designware: introducing I2C_SLAVE definitions
Message-ID<tgf8S-5xo-27@gated-at.bofh.it>
In reply to#1590462
- Definitions were added to core library
- A example was added to designware-core.txt Documentation that shows
  how the slave can be setup using DTS

SLAVE related definitions were added to the core of the controller.

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
---
V5->V6
- Included an example of use in the device tree binding document
(with the RESEND)
- Removed the i2c-designware.txt binding leading 0 to add the Rob 
  Herring ack.
 
 .../devicetree/bindings/i2c/i2c-designware.txt     | 16 +++++++++-
 drivers/i2c/busses/i2c-designware-core.h           | 35 ++++++++++++++++++++--
 2 files changed, 48 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index fee26dc3e858..fbb0a6d8b964 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -20,7 +20,7 @@ Optional properties :
  - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds.
    This value which is by default 300ns is used to compute the tHIGH period.
 
-Example :
+Examples :
 
 	i2c@f0000 {
 		#address-cells = <1>;
@@ -43,3 +43,17 @@ Example :
 		i2c-sda-falling-time-ns = <300>;
 		i2c-scl-falling-time-ns = <300>;
 	};
+
+	i2c@1120000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x2000 0x100>;
+		clock-frequency = <400000>;
+		clocks = <&i2cclk>;
+		interrupts = <0>;
+
+		eeprom@64 {
+			compatible = "linux,slave-24c02";
+			reg = <0x40000064>;
+		};
+	};
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 35d7264d9e3a..b620d76ffc8d 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -1,5 +1,5 @@
 /*
- * Synopsys DesignWare I2C adapter driver (master only).
+ * Synopsys DesignWare I2C adapter driver.
  *
  * Based on the TI DAVINCI I2C adapter driver.
  *
@@ -36,15 +36,20 @@
 #define DW_IC_CON_SPEED_FAST		0x4
 #define DW_IC_CON_SPEED_HIGH		0x6
 #define DW_IC_CON_SPEED_MASK		0x6
+#define DW_IC_CON_10BITADDR_SLAVE		0x8
 #define DW_IC_CON_10BITADDR_MASTER	0x10
 #define DW_IC_CON_RESTART_EN		0x20
 #define DW_IC_CON_SLAVE_DISABLE		0x40
+#define DW_IC_CON_STOP_DET_IFADDRESSED		0x80
+#define DW_IC_CON_TX_EMPTY_CTRL		0x100
+#define DW_IC_CON_RX_FIFO_FULL_HLD_CTRL		0x200
 
 /*
  * Registers offset
  */
 #define DW_IC_CON		0x0
 #define DW_IC_TAR		0x4
+#define DW_IC_SAR		0x8
 #define DW_IC_DATA_CMD		0x10
 #define DW_IC_SS_SCL_HCNT	0x14
 #define DW_IC_SS_SCL_LCNT	0x18
@@ -75,6 +80,7 @@
 #define DW_IC_SDA_HOLD		0x7c
 #define DW_IC_TX_ABRT_SOURCE	0x80
 #define DW_IC_ENABLE_STATUS	0x9c
+#define DW_IC_CLR_RESTART_DET	0xa8
 #define DW_IC_COMP_PARAM_1	0xf4
 #define DW_IC_COMP_VERSION	0xf8
 #define DW_IC_SDA_HOLD_MIN_VERS	0x3131312A
@@ -93,15 +99,22 @@
 #define DW_IC_INTR_STOP_DET	0x200
 #define DW_IC_INTR_START_DET	0x400
 #define DW_IC_INTR_GEN_CALL	0x800
+#define DW_IC_INTR_RESTART_DET	0x1000
 
 #define DW_IC_INTR_DEFAULT_MASK		(DW_IC_INTR_RX_FULL | \
 					 DW_IC_INTR_TX_ABRT | \
 					 DW_IC_INTR_STOP_DET)
 #define DW_IC_INTR_MASTER_MASK		(DW_IC_INTR_DEFAULT_MASK | \
 					 DW_IC_INTR_TX_EMPTY)
+#define DW_IC_INTR_SLAVE_MASK		(DW_IC_INTR_DEFAULT_MASK | \
+					 DW_IC_INTR_RX_DONE | \
+					 DW_IC_INTR_RX_UNDER | \
+					 DW_IC_INTR_RD_REQ)
+
 #define DW_IC_STATUS_ACTIVITY		0x1
 #define DW_IC_STATUS_TFE		BIT(2)
 #define DW_IC_STATUS_MASTER_ACTIVITY	BIT(5)
+#define DW_IC_STATUS_SLAVE_ACTIVITY	BIT(6)
 
 #define DW_IC_SDA_HOLD_RX_SHIFT		16
 #define DW_IC_SDA_HOLD_RX_MASK		GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT)
@@ -123,6 +136,12 @@
 #define TIMEOUT			20 /* ms */
 
 /*
+ * operation modes
+ */
+#define DW_IC_MASTER		0
+#define DW_IC_SLAVE		1
+
+/*
  * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
  *
  * only expected abort codes are listed here
@@ -139,6 +158,9 @@
 #define ABRT_10B_RD_NORSTRT	10
 #define ABRT_MASTER_DIS		11
 #define ARB_LOST		12
+#define ABRT_SLAVE_FLUSH_TXFIFO	13
+#define ABRT_SLAVE_ARBLOST	14
+#define ABRT_SLAVE_RD_INTX	15
 
 #define DW_IC_TX_ABRT_7B_ADDR_NOACK	(1UL << ABRT_7B_ADDR_NOACK)
 #define DW_IC_TX_ABRT_10ADDR1_NOACK	(1UL << ABRT_10ADDR1_NOACK)
@@ -151,6 +173,9 @@
 #define DW_IC_TX_ABRT_10B_RD_NORSTRT	(1UL << ABRT_10B_RD_NORSTRT)
 #define DW_IC_TX_ABRT_MASTER_DIS	(1UL << ABRT_MASTER_DIS)
 #define DW_IC_TX_ARB_LOST		(1UL << ARB_LOST)
+#define DW_IC_RX_ABRT_SLAVE_RD_INTX	(1UL << ABRT_SLAVE_RD_INTX)
+#define DW_IC_RX_ABRT_SLAVE_ARBLOST	(1UL << ABRT_SLAVE_ARBLOST)
+#define DW_IC_RX_ABRT_SLAVE_FLUSH_TXFIFO	(1UL << ABRT_SLAVE_FLUSH_TXFIFO)
 
 #define DW_IC_TX_ABRT_NOACK		(DW_IC_TX_ABRT_7B_ADDR_NOACK | \
 					 DW_IC_TX_ABRT_10ADDR1_NOACK | \
@@ -196,7 +221,11 @@
  * @acquire_lock: function to acquire a hardware lock on the bus
  * @release_lock: function to release a hardware lock on the bus
  * @pm_runtime_disabled: true if pm runtime is disabled
- *
+ * @dynamic_tar_update_enabled: true if dynamic TAR update is enabled
+ * @disable: function to disable the controller
+ * @disable_int: function to disable all interrupts
+ * @init: function to initialize the I2C hardware
+ * @mode: operation mode - I2C slave or I2C master
  * HCNT and LCNT parameters can be used if the platform knows more accurate
  * values than the one computed based only on the input clock frequency.
  * Leave them to be %0 if not used.
@@ -206,6 +235,7 @@ struct dw_i2c_dev {
 	void __iomem		*base;
 	struct completion	cmd_complete;
 	struct clk		*clk;
+	struct i2c_client		*slave;
 	u32			(*get_clk_rate_khz) (struct dw_i2c_dev *dev);
 	struct dw_pci_controller *controller;
 	int			cmd_err;
@@ -225,6 +255,7 @@ struct dw_i2c_dev {
 	struct i2c_adapter	adapter;
 	u32			functionality;
 	u32			master_cfg;
+	u32			slave_cfg;
 	unsigned int		tx_fifo_depth;
 	unsigned int		rx_fifo_depth;
 	int			rx_outstanding;
-- 
2.11.0

[toc] | [prev] | [next] | [standalone]

#1591104 — Re: [RESEND PATCH v6 4/6] i2c: designware: introducing I2C_SLAVE definitions

FromJarkko Nikula <jarkko.nikula@linux.intel.com>
Date2017-03-02 15:00 +0100
SubjectRe: [RESEND PATCH v6 4/6] i2c: designware: introducing I2C_SLAVE definitions
Message-ID<tgzqX-2ZE-43@gated-at.bofh.it>
In reply to#1590472
On 03/01/17 17:59, Luis Oliveira wrote:
> - Definitions were added to core library
> - A example was added to designware-core.txt Documentation that shows
>   how the slave can be setup using DTS
>
> SLAVE related definitions were added to the core of the controller.
>
> Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> V5->V6
> - Included an example of use in the device tree binding document
> (with the RESEND)
> - Removed the i2c-designware.txt binding leading 0 to add the Rob
>   Herring ack.
>
>  .../devicetree/bindings/i2c/i2c-designware.txt     | 16 +++++++++-
>  drivers/i2c/busses/i2c-designware-core.h           | 35 ++++++++++++++++++++--
>  2 files changed, 48 insertions(+), 3 deletions(-)
>
...
> diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
> index 35d7264d9e3a..b620d76ffc8d 100644
> --- a/drivers/i2c/busses/i2c-designware-core.h
> +++ b/drivers/i2c/busses/i2c-designware-core.h
> @@ -1,5 +1,5 @@
...
> @@ -196,7 +221,11 @@
>   * @acquire_lock: function to acquire a hardware lock on the bus
>   * @release_lock: function to release a hardware lock on the bus
>   * @pm_runtime_disabled: true if pm runtime is disabled
> - *
> + * @dynamic_tar_update_enabled: true if dynamic TAR update is enabled
> + * @disable: function to disable the controller
> + * @disable_int: function to disable all interrupts
> + * @init: function to initialize the I2C hardware
> + * @mode: operation mode - I2C slave or I2C master
>   * HCNT and LCNT parameters can be used if the platform knows more accurate
>   * values than the one computed based only on the input clock frequency.
>   * Leave them to be %0 if not used.
> @@ -206,6 +235,7 @@ struct dw_i2c_dev {
>  	void __iomem		*base;
>  	struct completion	cmd_complete;
>  	struct clk		*clk;
> +	struct i2c_client		*slave;
>  	u32			(*get_clk_rate_khz) (struct dw_i2c_dev *dev);
>  	struct dw_pci_controller *controller;
>  	int			cmd_err;
> @@ -225,6 +255,7 @@ struct dw_i2c_dev {
>  	struct i2c_adapter	adapter;
>  	u32			functionality;
>  	u32			master_cfg;
> +	u32			slave_cfg;
>  	unsigned int		tx_fifo_depth;
>  	unsigned int		rx_fifo_depth;
>  	int			rx_outstanding;

You should add comments for "slave" and "slave_cfg" since they are added 
here and move comments for other members variables to patches 3/6 and 
5/6 where they are added.

-- 
Jarkko

[toc] | [prev] | [next] | [standalone]

#1590473 — [RESEND PATCH v6 6/6] i2c: designware: enable SLAVE in platform module

FromLuis Oliveira <Luis.Oliveira@synopsys.com>
Date2017-03-01 17:20 +0100
Subject[RESEND PATCH v6 6/6] i2c: designware: enable SLAVE in platform module
Message-ID<tgf8T-5xo-35@gated-at.bofh.it>
In reply to#1590462
- Slave mode selected in platform module if the support is detected in
  the DT.

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
---
V5->V6
- No changes

 drivers/i2c/busses/Kconfig                  |  1 +
 drivers/i2c/busses/i2c-designware-platdrv.c | 41 +++++++++++++++++++++++++----
 2 files changed, 37 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index b3d37ac9f5f6..13bd932c81f7 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -484,6 +484,7 @@ config I2C_DESIGNWARE_SLAVE
 	select I2C_SLAVE
 	select I2C_SLAVE_EEPROM
 	depends on I2C_DESIGNWARE_PLATFORM
+	default y
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C slave adapter.
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 671bdc0fdb24..5fcd9dbfc64c 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -1,5 +1,5 @@
 /*
- * Synopsys DesignWare I2C adapter driver (master only).
+ * Synopsys DesignWare I2C adapter driver.
  *
  * Based on the TI DAVINCI I2C adapter driver.
  *
@@ -142,9 +142,13 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
 
 static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
 {
+	dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
+
 	dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
 			  DW_IC_CON_RESTART_EN;
 
+	dev->mode = DW_IC_MASTER;
+
 	switch (dev->clk_freq) {
 	case 100000:
 		dev->master_cfg |= DW_IC_CON_SPEED_STD;
@@ -157,6 +161,28 @@ static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
 	}
 }
 
+static void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
+{
+	dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY;
+
+	dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
+			 DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED |
+			 DW_IC_CON_SPEED_FAST;
+
+	dev->mode = DW_IC_SLAVE;
+
+	switch (dev->clk_freq) {
+	case 100000:
+		dev->slave_cfg |= DW_IC_CON_SPEED_STD;
+		break;
+	case 3400000:
+		dev->slave_cfg |= DW_IC_CON_SPEED_HIGH;
+		break;
+	default:
+		dev->slave_cfg |= DW_IC_CON_SPEED_FAST;
+	}
+}
+
 static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare)
 {
 	if (IS_ERR(i_dev->clk))
@@ -261,9 +287,10 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
-
-	i2c_dw_configure_master(dev);
+	if (i2c_detect_slave_mode(&pdev->dev))
+		i2c_dw_configure_slave(dev);
+	else
+		i2c_dw_configure_master(dev);
 
 	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (!i2c_dw_plat_prepare_clk(dev, true)) {
@@ -292,7 +319,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 		pm_runtime_enable(&pdev->dev);
 	}
 
-	ret = i2c_dw_probe(dev);
+	if (dev->mode == DW_IC_SLAVE)
+		ret = i2c_dw_probe_slave(dev);
+	else
+		ret = i2c_dw_probe(dev);
+
 	if (ret && !dev->pm_runtime_disabled)
 		pm_runtime_disable(&pdev->dev);
 
-- 
2.11.0

[toc] | [prev] | [next] | [standalone]

#1590479 — [RESEND PATCH v6 2/6] i2c: designware: refactoring of the i2c-designware

FromLuis Oliveira <Luis.Oliveira@synopsys.com>
Date2017-03-01 17:20 +0100
Subject[RESEND PATCH v6 2/6] i2c: designware: refactoring of the i2c-designware
Message-ID<tgf8U-5xo-67@gated-at.bofh.it>
In reply to#1590462
- Factor out all _master() part of code from i2c-designware-core
  and i2c-designware-platdrv to separate functions.
- Standardize all code related with MASTER mode.
- I have to take off DW_IC_INTR_TX_EMPTY from DW_IC_INTR_DEFAULT_MASK
  because it is master specific.

The purpose of this is to prepare the controller to have is I2C MASTER
flow in a separate driver. To do this first all the
functions/definitions related to the MASTER flow were identified.

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
V5->v6
- Removed the __func__ of dev_dbg prints
- Fix i2c_dw_configure_master() to accept dw_i2c_dev *

 drivers/i2c/busses/i2c-designware-core.c    | 56 +++++++++++++++++------------
 drivers/i2c/busses/i2c-designware-platdrv.c | 31 +++++++++-------
 2 files changed, 52 insertions(+), 35 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 46937865ef8f..8b1b61f06a3f 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -87,10 +87,10 @@
 #define DW_IC_INTR_GEN_CALL	0x800
 
 #define DW_IC_INTR_DEFAULT_MASK		(DW_IC_INTR_RX_FULL | \
-					 DW_IC_INTR_TX_EMPTY | \
 					 DW_IC_INTR_TX_ABRT | \
 					 DW_IC_INTR_STOP_DET)
-
+#define DW_IC_INTR_MASTER_MASK		(DW_IC_INTR_DEFAULT_MASK | \
+					 DW_IC_INTR_TX_EMPTY)
 #define DW_IC_STATUS_ACTIVITY	0x1
 
 #define DW_IC_SDA_HOLD_RX_SHIFT		16
@@ -202,6 +202,16 @@ static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
 	}
 }
 
+static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev)
+{
+	/* Configure Tx/Rx FIFO threshold levels */
+	dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL);
+	dw_writel(dev, 0, DW_IC_RX_TL);
+
+	/* Configure the I2C master */
+	dw_writel(dev, dev->master_cfg, DW_IC_CON);
+}
+
 static u32
 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
 {
@@ -440,13 +450,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 			"Hardware too old to adjust SDA hold time.\n");
 	}
 
-	/* Configure Tx/Rx FIFO threshold levels */
-	dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL);
-	dw_writel(dev, 0, DW_IC_RX_TL);
-
-	/* Configure the I2C master */
-	dw_writel(dev, dev->master_cfg , DW_IC_CON);
-
+	i2c_dw_configure_fifo_master(dev);
 	i2c_dw_release_lock(dev);
 
 	return 0;
@@ -511,7 +515,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 
 	/* Clear and enable interrupts */
 	dw_readl(dev, DW_IC_CLR_INTR);
-	dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK);
+	dw_writel(dev, DW_IC_INTR_MASTER_MASK, DW_IC_INTR_MASK);
 }
 
 /*
@@ -531,7 +535,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 	u8 *buf = dev->tx_buf;
 	bool need_restart = false;
 
-	intr_mask = DW_IC_INTR_DEFAULT_MASK;
+	intr_mask = DW_IC_INTR_MASTER_MASK;
 
 	for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) {
 		u32 flags = msgs[dev->msg_write_idx].flags;
@@ -881,22 +885,14 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
 }
 
 /*
- * Interrupt service routine. This gets called whenever an I2C interrupt
+ * Interrupt service routine. This gets called whenever an I2C master interrupt
  * occurs.
  */
-static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
+static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
 {
-	struct dw_i2c_dev *dev = dev_id;
-	u32 stat, enabled;
-
-	enabled = dw_readl(dev, DW_IC_ENABLE);
-	stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
-	dev_dbg(dev->dev, "%s: enabled=%#x stat=%#x\n", __func__, enabled, stat);
-	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
-		return IRQ_NONE;
+	u32 stat;
 
 	stat = i2c_dw_read_clear_intrbits(dev);
-
 	if (stat & DW_IC_INTR_TX_ABRT) {
 		dev->cmd_err |= DW_IC_ERR_TX_ABRT;
 		dev->status = STATUS_IDLE;
@@ -931,6 +927,22 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 		dw_writel(dev, stat, DW_IC_INTR_MASK);
 	}
 
+	return 0;
+}
+
+static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
+{
+	struct dw_i2c_dev *dev = dev_id;
+	u32 stat, enabled;
+
+	enabled = dw_readl(dev, DW_IC_ENABLE);
+	stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
+	dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
+	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
+		return IRQ_NONE;
+
+	i2c_dw_irq_handler_master(dev);
+
 	return IRQ_HANDLED;
 }
 
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 381f0c1058b4..206dea03b0d0 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -140,6 +140,23 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
 }
 #endif
 
+static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
+{
+	dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+			  DW_IC_CON_RESTART_EN;
+
+	switch (dev->clk_freq) {
+	case 100000:
+		dev->master_cfg |= DW_IC_CON_SPEED_STD;
+		break;
+	case 3400000:
+		dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
+		break;
+	default:
+		dev->master_cfg |= DW_IC_CON_SPEED_FAST;
+	}
+}
+
 static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare)
 {
 	if (IS_ERR(i_dev->clk))
@@ -246,19 +263,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 	dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
 
-	dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
-			  DW_IC_CON_RESTART_EN;
-
-	switch (dev->clk_freq) {
-	case 100000:
-		dev->master_cfg |= DW_IC_CON_SPEED_STD;
-		break;
-	case 3400000:
-		dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
-		break;
-	default:
-		dev->master_cfg |= DW_IC_CON_SPEED_FAST;
-	}
+	i2c_dw_configure_master(dev);
 
 	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (!i2c_dw_plat_prepare_clk(dev, true)) {
-- 
2.11.0

[toc] | [prev] | [next] | [standalone]

#1591101 — Re: [RESEND PATCH v6 2/6] i2c: designware: refactoring of the i2c-designware

FromJarkko Nikula <jarkko.nikula@linux.intel.com>
Date2017-03-02 15:00 +0100
SubjectRe: [RESEND PATCH v6 2/6] i2c: designware: refactoring of the i2c-designware
Message-ID<tgzqX-2ZE-39@gated-at.bofh.it>
In reply to#1590479
On 03/01/17 17:59, Luis Oliveira wrote:
> - Factor out all _master() part of code from i2c-designware-core
>   and i2c-designware-platdrv to separate functions.
> - Standardize all code related with MASTER mode.
> - I have to take off DW_IC_INTR_TX_EMPTY from DW_IC_INTR_DEFAULT_MASK
>   because it is master specific.
>
> The purpose of this is to prepare the controller to have is I2C MASTER
> flow in a separate driver. To do this first all the
> functions/definitions related to the MASTER flow were identified.
>
> Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> V5->v6
> - Removed the __func__ of dev_dbg prints
> - Fix i2c_dw_configure_master() to accept dw_i2c_dev *
>
>  drivers/i2c/busses/i2c-designware-core.c    | 56 +++++++++++++++++------------
>  drivers/i2c/busses/i2c-designware-platdrv.c | 31 +++++++++-------
>  2 files changed, 52 insertions(+), 35 deletions(-)
>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

[toc] | [prev] | [next] | [standalone]

#1590482 — [RESEND PATCH v6 5/6] i2c: designware: add SLAVE mode functions

FromLuis Oliveira <Luis.Oliveira@synopsys.com>
Date2017-03-01 17:20 +0100
Subject[RESEND PATCH v6 5/6] i2c: designware: add SLAVE mode functions
Message-ID<tgf8T-5xo-57@gated-at.bofh.it>
In reply to#1590462
- Changes in Kconfig to enable I2C_DESIGNWARE_SLAVE support
- Slave functions added to core library file
- Slave abort sources added to common source file
- New driver: i2c-designware-slave added
- Changes in the Makefile to compile the I2C_DESIGNWARE_SLAVE module
  when supported by the architecture.

All the SLAVE flow is added but it is not enabled via platform
driver.

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
---
V5->V6
- Enable Slave mode using a different option (kbuild reported an error)
- Identation fixes needed
- Changed debug prints to dev_vdbg
- Fixed slave enumeration

 drivers/i2c/busses/Kconfig                 |  14 +-
 drivers/i2c/busses/Makefile                |   1 +
 drivers/i2c/busses/i2c-designware-common.c |   7 +
 drivers/i2c/busses/i2c-designware-core.h   |   3 +
 drivers/i2c/busses/i2c-designware-slave.c  | 403 +++++++++++++++++++++++++++++
 5 files changed, 427 insertions(+), 1 deletion(-)
 create mode 100644 drivers/i2c/busses/i2c-designware-slave.c

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index c64221d143ff..b3d37ac9f5f6 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -474,11 +474,23 @@ config I2C_DESIGNWARE_PLATFORM
 	depends on (ACPI && COMMON_CLK) || !ACPI
 	help
 	  If you say yes to this option, support will be included for the
-	  Synopsys DesignWare I2C adapter. Only master mode is supported.
+	  Synopsys DesignWare I2C adapter.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-designware-platform.
 
+config I2C_DESIGNWARE_SLAVE
+	bool "Synopsys DesignWare Slave"
+	select I2C_SLAVE
+	select I2C_SLAVE_EEPROM
+	depends on I2C_DESIGNWARE_PLATFORM
+	help
+	  If you say yes to this option, support will be included for the
+	  Synopsys DesignWare I2C slave adapter.
+
+	  This is not a standalone module, this module compiles together with
+	  i2c-designware-core.
+
 config I2C_DESIGNWARE_PCI
 	tristate "Synopsys DesignWare PCI"
 	depends on PCI
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index b7abbe167686..477104e2a58f 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
 obj-$(CONFIG_I2C_DAVINCI)	+= i2c-davinci.o
 obj-$(CONFIG_I2C_DESIGNWARE_CORE)	+= i2c-designware-core.o
 i2c-designware-core-objs := i2c-designware-common.o i2c-designware-master.o
+i2c-designware-core-$(CONFIG_I2C_DESIGNWARE_SLAVE) += i2c-designware-slave.o
 obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM)	+= i2c-designware-platform.o
 i2c-designware-platform-objs := i2c-designware-platdrv.o
 i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
index 6357c7c78f6d..24641635aa20 100644
--- a/drivers/i2c/busses/i2c-designware-common.c
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -56,6 +56,13 @@ static char *abort_sources[] = {
 		"trying to use disabled adapter",
 	[ARB_LOST] =
 		"lost arbitration",
+	[ABRT_SLAVE_FLUSH_TXFIFO] =
+		"read command so flush old data in the TX FIFO",
+	[ABRT_SLAVE_ARBLOST] =
+		"slave lost the bus while transmitting data to a remote master",
+	[ABRT_SLAVE_RD_INTX] =
+		"slave request for data to be transmitted and there is a 1 in "
+		"bit 8 of IC_DATA_CMD",
 };
 
 u32 dw_readl(struct dw_i2c_dev *dev, int offset)
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index b620d76ffc8d..6c70945cccea 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -277,6 +277,7 @@ struct dw_i2c_dev {
 	void			(*disable)(struct dw_i2c_dev *dev);
 	void			(*disable_int)(struct dw_i2c_dev *dev);
 	int			(*init)(struct dw_i2c_dev *dev);
+	bool			mode;
 };
 
 #define ACCESS_SWAP		0x00000001
@@ -298,9 +299,11 @@ u32 i2c_dw_func(struct i2c_adapter *adap);
 void i2c_dw_disable(struct dw_i2c_dev *dev);
 void i2c_dw_disable_int(struct dw_i2c_dev *dev);
 int i2c_dw_init(struct dw_i2c_dev *dev);
+int i2c_dw_init_slave(struct dw_i2c_dev *dev);
 
 extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
 extern int i2c_dw_probe(struct dw_i2c_dev *dev);
+extern int i2c_dw_probe_slave(struct dw_i2c_dev *dev);
 
 #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
 extern int i2c_dw_eval_lock_support(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
new file mode 100644
index 000000000000..06e50243b5a1
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -0,0 +1,403 @@
+/*
+ * Synopsys DesignWare I2C adapter driver (slave only).
+ *
+ * Based on the Synopsys DesignWare I2C adapter driver (master).
+ *
+ * Copyright (C) 2016 Synopsys Inc.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include "i2c-designware-core.h"
+
+static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev)
+{
+	/* Configure Tx/Rx FIFO threshold levels. */
+	dw_writel(dev, 0, DW_IC_TX_TL);
+	dw_writel(dev, 0, DW_IC_RX_TL);
+
+	/* Configure the I2C slave. */
+	dw_writel(dev, dev->slave_cfg, DW_IC_CON);
+	dw_writel(dev, DW_IC_INTR_SLAVE_MASK, DW_IC_INTR_MASK);
+}
+
+/**
+ * i2c_dw_init_slave() - Initialize the designware i2c slave hardware
+ * @dev: device private data
+ *
+ * This functions configures and enables the I2C.
+ * This function is called during I2C init function, and in case of timeout at
+ * run time.
+ */
+int i2c_dw_init_slave(struct dw_i2c_dev *dev)
+{
+	u32 sda_falling_time, scl_falling_time;
+	u32 reg, comp_param1;
+	u32 hcnt, lcnt;
+	int ret;
+
+	ret = i2c_dw_acquire_lock(dev);
+	if (ret)
+		return ret;
+
+	reg = dw_readl(dev, DW_IC_COMP_TYPE);
+	if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
+		/* Configure register endianness access. */
+		dev->accessor_flags |= ACCESS_SWAP;
+	} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
+		/* Configure register access mode 16bit. */
+		dev->accessor_flags |= ACCESS_16BIT;
+	} else if (reg != DW_IC_COMP_TYPE_VALUE) {
+		dev_err(dev->dev,
+			"Unknown Synopsys component type: 0x%08x\n", reg);
+		i2c_dw_release_lock(dev);
+		return -ENODEV;
+	}
+
+	comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
+
+	/* Disable the adapter. */
+	__i2c_dw_enable_and_wait(dev, false);
+
+	/* Set standard and fast speed deviders for high/low periods. */
+	sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
+	scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
+
+	/* Set SCL timing parameters for standard-mode. */
+	if (dev->ss_hcnt && dev->ss_lcnt) {
+		hcnt = dev->ss_hcnt;
+		lcnt = dev->ss_lcnt;
+	} else {
+		hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
+					4000,	/* tHD;STA = tHIGH = 4.0 us */
+					sda_falling_time,
+					0,	/* 0: DW default, 1: Ideal */
+					0);	/* No offset */
+		lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
+					4700,	/* tLOW = 4.7 us */
+					scl_falling_time,
+					0);	/* No offset */
+	}
+	dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
+	dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
+	dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+	/* Set SCL timing parameters for fast-mode or fast-mode plus. */
+	if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) {
+		hcnt = dev->fp_hcnt;
+		lcnt = dev->fp_lcnt;
+	} else if (dev->fs_hcnt && dev->fs_lcnt) {
+		hcnt = dev->fs_hcnt;
+		lcnt = dev->fs_lcnt;
+	} else {
+		hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
+					600,	/* tHD;STA = tHIGH = 0.6 us */
+					sda_falling_time,
+					0,	/* 0: DW default, 1: Ideal */
+					0);	/* No offset */
+		lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
+					1300,	/* tLOW = 1.3 us */
+					scl_falling_time,
+					0);	/* No offset */
+	}
+	dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
+	dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
+	dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+	if ((dev->slave_cfg & DW_IC_CON_SPEED_MASK) ==
+		DW_IC_CON_SPEED_HIGH) {
+		if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
+			!= DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) {
+			dev_err(dev->dev, "High Speed not supported!\n");
+			dev->slave_cfg &= ~DW_IC_CON_SPEED_MASK;
+			dev->slave_cfg |= DW_IC_CON_SPEED_FAST;
+		} else if (dev->hs_hcnt && dev->hs_lcnt) {
+			hcnt = dev->hs_hcnt;
+			lcnt = dev->hs_lcnt;
+			dw_writel(dev, hcnt, DW_IC_HS_SCL_HCNT);
+			dw_writel(dev, lcnt, DW_IC_HS_SCL_LCNT);
+			dev_dbg(dev->dev, "HighSpeed-mode HCNT:LCNT = %d:%d\n",
+				hcnt, lcnt);
+		}
+	}
+
+	/* Configure SDA Hold Time if required. */
+	reg = dw_readl(dev, DW_IC_COMP_VERSION);
+	if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
+		if (!dev->sda_hold_time) {
+			/* Keep previous hold time setting if no one set it. */
+			dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
+		}
+		/*
+		 * Workaround for avoiding TX arbitration lost in case I2C
+		 * slave pulls SDA down "too quickly" after falling egde of
+		 * SCL by enabling non-zero SDA RX hold. Specification says it
+		 * extends incoming SDA low to high transition while SCL is
+		 * high but it apprears to help also above issue.
+		 */
+		if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
+			dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
+		dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
+	} else {
+		dev_warn(dev->dev,
+			"Hardware too old to adjust SDA hold time.\n");
+	}
+
+	i2c_dw_configure_fifo_slave(dev);
+	i2c_dw_release_lock(dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i2c_dw_init_slave);
+
+int i2c_dw_reg_slave(struct i2c_client *slave)
+{
+	struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter);
+
+	if (dev->slave)
+		return -EBUSY;
+	if (slave->flags & I2C_CLIENT_TEN)
+		return -EAFNOSUPPORT;
+	/*
+	 * Set slave address in the IC_SAR register,
+	 * the address to which the DW_apb_i2c responds.
+	 */
+	__i2c_dw_enable(dev, false);
+	dw_writel(dev, slave->addr, DW_IC_SAR);
+	dev->slave = slave;
+
+	__i2c_dw_enable(dev, true);
+
+	dev->cmd_err = 0;
+	dev->msg_write_idx = 0;
+	dev->msg_read_idx = 0;
+	dev->msg_err = 0;
+	dev->status = STATUS_IDLE;
+	dev->abort_source = 0;
+	dev->rx_outstanding = 0;
+
+	return 0;
+}
+
+static int i2c_dw_unreg_slave(struct i2c_client *slave)
+{
+	struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter);
+
+	dev->disable_int(dev);
+	dev->disable(dev);
+	dev->slave = NULL;
+
+	return 0;
+}
+
+static u32 i2c_dw_read_clear_intrbits_slave(struct dw_i2c_dev *dev)
+{
+	u32 stat;
+
+	/*
+	 * The IC_INTR_STAT register just indicates "enabled" interrupts.
+	 * Ths unmasked raw version of interrupt status bits are available
+	 * in the IC_RAW_INTR_STAT register.
+	 *
+	 * That is,
+	 *   stat = dw_readl(IC_INTR_STAT);
+	 * equals to,
+	 *   stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK);
+	 *
+	 * The raw version might be useful for debugging purposes.
+	 */
+	stat = dw_readl(dev, DW_IC_INTR_STAT);
+
+	/*
+	 * Do not use the IC_CLR_INTR register to clear interrupts, or
+	 * you'll miss some interrupts, triggered during the period from
+	 * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR).
+	 *
+	 * Instead, use the separately-prepared IC_CLR_* registers.
+	 */
+	if (stat & DW_IC_INTR_TX_ABRT)
+		dw_readl(dev, DW_IC_CLR_TX_ABRT);
+	if (stat & DW_IC_INTR_RX_UNDER)
+		dw_readl(dev, DW_IC_CLR_RX_UNDER);
+	if (stat & DW_IC_INTR_RX_OVER)
+		dw_readl(dev, DW_IC_CLR_RX_OVER);
+	if (stat & DW_IC_INTR_TX_OVER)
+		dw_readl(dev, DW_IC_CLR_TX_OVER);
+	if (stat & DW_IC_INTR_RX_DONE)
+		dw_readl(dev, DW_IC_CLR_RX_DONE);
+	if (stat & DW_IC_INTR_ACTIVITY)
+		dw_readl(dev, DW_IC_CLR_ACTIVITY);
+	if (stat & DW_IC_INTR_STOP_DET)
+		dw_readl(dev, DW_IC_CLR_STOP_DET);
+	if (stat & DW_IC_INTR_START_DET)
+		dw_readl(dev, DW_IC_CLR_START_DET);
+	if (stat & DW_IC_INTR_GEN_CALL)
+		dw_readl(dev, DW_IC_CLR_GEN_CALL);
+
+	return stat;
+}
+
+/*
+ * Interrupt service routine. This gets called whenever an I2C slave interrupt
+ * occurs.
+ */
+
+static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
+{
+	u32 raw_stat, stat, enabled;
+	u8 val, slave_activity;
+
+	stat = dw_readl(dev, DW_IC_INTR_STAT);
+	enabled = dw_readl(dev, DW_IC_ENABLE);
+	raw_stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
+	slave_activity = ((dw_readl(dev, DW_IC_STATUS) &
+		DW_IC_STATUS_SLAVE_ACTIVITY) >> 6);
+
+	if (!enabled || !(raw_stat & ~DW_IC_INTR_ACTIVITY))
+		return 0;
+
+	dev_dbg(dev->dev,
+		"%#x SLAVE_ACTV=%#x : RAW_INTR_STAT=%#x : INTR_STAT=%#x\n",
+		enabled, slave_activity, raw_stat, stat);
+
+	if (stat & DW_IC_INTR_RESTART_DET)
+		dw_readl(dev, DW_IC_CLR_RESTART_DET);
+	if (stat & DW_IC_INTR_START_DET)
+		dw_readl(dev, DW_IC_CLR_START_DET);
+	if (stat & DW_IC_INTR_ACTIVITY)
+		dw_readl(dev, DW_IC_CLR_ACTIVITY);
+	if (stat & DW_IC_INTR_RX_OVER)
+		dw_readl(dev, DW_IC_CLR_RX_OVER);
+	if ((stat & DW_IC_INTR_RX_FULL) && (stat & DW_IC_INTR_STOP_DET))
+		i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_REQUESTED, &val);
+
+	if (slave_activity) {
+		if (stat & DW_IC_INTR_RD_REQ) {
+			if (stat & DW_IC_INTR_RX_FULL) {
+				val = dw_readl(dev, DW_IC_DATA_CMD);
+				if (!i2c_slave_event(dev->slave,
+				I2C_SLAVE_WRITE_RECEIVED, &val)) {
+					dev_vdbg(dev->dev, "Byte %X acked!",
+					val);
+					}
+				dw_readl(dev, DW_IC_CLR_RD_REQ);
+				stat = i2c_dw_read_clear_intrbits_slave(dev);
+			} else {
+				dw_readl(dev, DW_IC_CLR_RD_REQ);
+				dw_readl(dev, DW_IC_CLR_RX_UNDER);
+				stat = i2c_dw_read_clear_intrbits_slave(dev);
+			}
+			if (!i2c_slave_event(dev->slave,
+					I2C_SLAVE_READ_REQUESTED, &val))
+				dw_writel(dev, val, DW_IC_DATA_CMD);
+		}
+	}
+
+	if (stat & DW_IC_INTR_RX_DONE) {
+		if (!i2c_slave_event(dev->slave, I2C_SLAVE_READ_PROCESSED,
+			&val))
+			dw_readl(dev, DW_IC_CLR_RX_DONE);
+
+		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
+		stat = i2c_dw_read_clear_intrbits_slave(dev);
+		return 1;
+	}
+
+	if (stat & DW_IC_INTR_RX_FULL) {
+		val = dw_readl(dev, DW_IC_DATA_CMD);
+		if (!i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_RECEIVED,
+			&val))
+			dev_vdbg(dev->dev, "Byte %X acked!", val);
+	} else {
+		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
+		stat = i2c_dw_read_clear_intrbits_slave(dev);
+	}
+
+	if (stat & DW_IC_INTR_TX_OVER)
+		dw_readl(dev, DW_IC_CLR_TX_OVER);
+
+	return 1;
+}
+
+static irqreturn_t i2c_dw_isr_slave(int this_irq, void *dev_id)
+{
+	struct dw_i2c_dev *dev = dev_id;
+	int ret;
+
+	i2c_dw_read_clear_intrbits_slave(dev);
+	ret = i2c_dw_irq_handler_slave(dev);
+
+	if (ret > 0)
+		complete(&dev->cmd_complete);
+
+	return IRQ_RETVAL(ret);
+}
+
+static struct i2c_algorithm i2c_dw_algo = {
+	.functionality = i2c_dw_func,
+	.reg_slave = i2c_dw_reg_slave,
+	.unreg_slave = i2c_dw_unreg_slave,
+};
+
+int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
+{
+	struct i2c_adapter *adap = &dev->adapter;
+	int ret;
+
+	init_completion(&dev->cmd_complete);
+
+	dev->init = i2c_dw_init_slave;
+	dev->disable = i2c_dw_disable;
+	dev->disable_int = i2c_dw_disable_int;
+
+	ret = dev->init(dev);
+	if (ret)
+		return ret;
+
+	snprintf(adap->name, sizeof(adap->name),
+		"Synopsys DesignWare I2C Slave adapter");
+	adap->retries = 3;
+	adap->algo = &i2c_dw_algo;
+	adap->dev.parent = dev->dev;
+	i2c_set_adapdata(adap, dev);
+
+	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr_slave,
+			     IRQF_SHARED, dev_name(dev->dev), dev);
+	if (ret) {
+		dev_err(dev->dev, "failure requesting irq %i: %d\n",
+			dev->irq, ret);
+		return ret;
+	}
+
+	ret = i2c_add_numbered_adapter(adap);
+	if (ret)
+		dev_err(dev->dev, "failure adding adapter: %d\n", ret);
+	pm_runtime_put_noidle(dev->dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_dw_probe_slave);
+
+MODULE_AUTHOR("Luis Oliveira <lolivei@synopsys.com>");
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus slave adapter");
+MODULE_LICENSE("GPL v2");
-- 
2.11.0

[toc] | [prev] | [next] | [standalone]

#1591161 — Re: [RESEND PATCH v6 5/6] i2c: designware: add SLAVE mode functions

FromJarkko Nikula <jarkko.nikula@linux.intel.com>
Date2017-03-02 16:00 +0100
SubjectRe: [RESEND PATCH v6 5/6] i2c: designware: add SLAVE mode functions
Message-ID<tgAn1-3FV-39@gated-at.bofh.it>
In reply to#1590482
On 03/01/17 17:59, Luis Oliveira wrote:
> - Changes in Kconfig to enable I2C_DESIGNWARE_SLAVE support
> - Slave functions added to core library file
> - Slave abort sources added to common source file
> - New driver: i2c-designware-slave added
> - Changes in the Makefile to compile the I2C_DESIGNWARE_SLAVE module
>   when supported by the architecture.
>
> All the SLAVE flow is added but it is not enabled via platform
> driver.
>
> Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
> ---
> V5->V6
> - Enable Slave mode using a different option (kbuild reported an error)
> - Identation fixes needed
> - Changed debug prints to dev_vdbg
> - Fixed slave enumeration
>
>  drivers/i2c/busses/Kconfig                 |  14 +-
>  drivers/i2c/busses/Makefile                |   1 +
>  drivers/i2c/busses/i2c-designware-common.c |   7 +
>  drivers/i2c/busses/i2c-designware-core.h   |   3 +
>  drivers/i2c/busses/i2c-designware-slave.c  | 403 +++++++++++++++++++++++++++++
>  5 files changed, 427 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/i2c/busses/i2c-designware-slave.c
>
...
> diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
> index 6357c7c78f6d..24641635aa20 100644
> --- a/drivers/i2c/busses/i2c-designware-common.c
> +++ b/drivers/i2c/busses/i2c-designware-common.c
> @@ -56,6 +56,13 @@ static char *abort_sources[] = {
>  		"trying to use disabled adapter",
>  	[ARB_LOST] =
>  		"lost arbitration",
> +	[ABRT_SLAVE_FLUSH_TXFIFO] =
> +		"read command so flush old data in the TX FIFO",
> +	[ABRT_SLAVE_ARBLOST] =
> +		"slave lost the bus while transmitting data to a remote master",
> +	[ABRT_SLAVE_RD_INTX] =
> +		"slave request for data to be transmitted and there is a 1 in "
> +		"bit 8 of IC_DATA_CMD",
>  };

I know ABRT_SLAVE_RD_INTX case is from the specification but I would 
prefer here one-line error text so it will be easier to grep from sources.

I would like it to be also be more understandable. I don't know did I 
understood it correctly but does it occur when attempting to read 
controller while transmitting or something like that?

> diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
> index b620d76ffc8d..6c70945cccea 100644
> --- a/drivers/i2c/busses/i2c-designware-core.h
> +++ b/drivers/i2c/busses/i2c-designware-core.h
> @@ -277,6 +277,7 @@ struct dw_i2c_dev {
>  	void			(*disable)(struct dw_i2c_dev *dev);
>  	void			(*disable_int)(struct dw_i2c_dev *dev);
>  	int			(*init)(struct dw_i2c_dev *dev);
> +	bool			mode;
>  };
>

As I mentioned add here comment for "mode" not in patch 4/6.

-- 
Jarkko

[toc] | [prev] | [next] | [standalone]

#1591220 — Re: [RESEND PATCH v6 5/6] i2c: designware: add SLAVE mode functions

FromLuis Oliveira <Luis.Oliveira@synopsys.com>
Date2017-03-02 17:00 +0100
SubjectRe: [RESEND PATCH v6 5/6] i2c: designware: add SLAVE mode functions
Message-ID<tgBj4-4tT-11@gated-at.bofh.it>
In reply to#1591161
On 02-Mar-17 14:33, Jarkko Nikula wrote:
> On 03/01/17 17:59, Luis Oliveira wrote:
>> - Changes in Kconfig to enable I2C_DESIGNWARE_SLAVE support
>> - Slave functions added to core library file
>> - Slave abort sources added to common source file
>> - New driver: i2c-designware-slave added
>> - Changes in the Makefile to compile the I2C_DESIGNWARE_SLAVE module
>>   when supported by the architecture.
>>
>> All the SLAVE flow is added but it is not enabled via platform
>> driver.
>>
>> Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
>> ---
>> V5->V6
>> - Enable Slave mode using a different option (kbuild reported an error)
>> - Identation fixes needed
>> - Changed debug prints to dev_vdbg
>> - Fixed slave enumeration
>>
>>  drivers/i2c/busses/Kconfig                 |  14 +-
>>  drivers/i2c/busses/Makefile                |   1 +
>>  drivers/i2c/busses/i2c-designware-common.c |   7 +
>>  drivers/i2c/busses/i2c-designware-core.h   |   3 +
>>  drivers/i2c/busses/i2c-designware-slave.c  | 403 +++++++++++++++++++++++++++++
>>  5 files changed, 427 insertions(+), 1 deletion(-)
>>  create mode 100644 drivers/i2c/busses/i2c-designware-slave.c
>>
> ...
>> diff --git a/drivers/i2c/busses/i2c-designware-common.c
>> b/drivers/i2c/busses/i2c-designware-common.c
>> index 6357c7c78f6d..24641635aa20 100644
>> --- a/drivers/i2c/busses/i2c-designware-common.c
>> +++ b/drivers/i2c/busses/i2c-designware-common.c
>> @@ -56,6 +56,13 @@ static char *abort_sources[] = {
>>          "trying to use disabled adapter",
>>      [ARB_LOST] =
>>          "lost arbitration",
>> +    [ABRT_SLAVE_FLUSH_TXFIFO] =
>> +        "read command so flush old data in the TX FIFO",
>> +    [ABRT_SLAVE_ARBLOST] =
>> +        "slave lost the bus while transmitting data to a remote master",
>> +    [ABRT_SLAVE_RD_INTX] =
>> +        "slave request for data to be transmitted and there is a 1 in "
>> +        "bit 8 of IC_DATA_CMD",
>>  };
> 
> I know ABRT_SLAVE_RD_INTX case is from the specification but I would prefer here
> one-line error text so it will be easier to grep from sources.
> 
> I would like it to be also be more understandable. I don't know did I understood
> it correctly but does it occur when attempting to read controller while
> transmitting or something like that?

It happens in the "slave-transmitter" mode, when the processor side responds to
a request for data to be transmitted and at the same time someone writes 1 to
the bit 8 of the IC_DATA_CMD. This bit in "slave-transmitter" mode has to be "0"
to indicate the data is to be transmitted.

In "slave-receiver" mode it has no purpose since writes to this register are not
required.

> 
>> diff --git a/drivers/i2c/busses/i2c-designware-core.h
>> b/drivers/i2c/busses/i2c-designware-core.h
>> index b620d76ffc8d..6c70945cccea 100644
>> --- a/drivers/i2c/busses/i2c-designware-core.h
>> +++ b/drivers/i2c/busses/i2c-designware-core.h
>> @@ -277,6 +277,7 @@ struct dw_i2c_dev {
>>      void            (*disable)(struct dw_i2c_dev *dev);
>>      void            (*disable_int)(struct dw_i2c_dev *dev);
>>      int            (*init)(struct dw_i2c_dev *dev);
>> +    bool            mode;
>>  };
>>
> 
> As I mentioned add here comment for "mode" not in patch 4/6.
> 
Ok, I will.
Thanks.

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web