Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1591159 > unrolled thread

Re: [PATCH 2/7] net: stmmac: Balance PTP reference clock enable/disable

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH 2/7] net: stmmac: Balance PTP reference clock  enable/disable Joao Pinto <Joao.Pinto@synopsys.com> - 2017-03-02 16:00 +0100

#1591159 — Re: [PATCH 2/7] net: stmmac: Balance PTP reference clock enable/disable

Às 5:24 PM de 2/23/2017, Thierry Reding escreveu:
> From: Thierry Reding <treding@nvidia.com>
> 
> clk_prepare_enable() and clk_disable_unprepare() for this clock aren't
> properly balanced, which can trigger a WARN_ON() in the common clock
> framework.
> 
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
>  drivers/net/ethernet/stmicro/stmmac/stmmac_main.c     | 4 ++++
>  drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 -
>  2 files changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 3cbe09682afe..6b7a5ce19589 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -1711,6 +1711,10 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
>  	stmmac_mmc_setup(priv);
>  
>  	if (init_ptp) {
> +		ret = clk_prepare_enable(priv->plat->clk_ptp_ref);
> +		if (ret < 0)
> +			netdev_warn(priv->dev, "failed to enable PTP reference clock: %d\n", ret);
> +
>  		ret = stmmac_init_ptp(priv);
>  		if (ret == -EOPNOTSUPP)
>  			netdev_warn(priv->dev, "PTP not supported by HW\n");
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> index 5b18355c0d2b..d285d6cfbd0d 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> @@ -365,7 +365,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
>  		plat->clk_ptp_ref = NULL;
>  		dev_warn(&pdev->dev, "PTP uses main clock\n");
>  	} else {
> -		clk_prepare_enable(plat->clk_ptp_ref);
>  		plat->clk_ptp_rate = clk_get_rate(plat->clk_ptp_ref);
>  		dev_dbg(&pdev->dev, "PTP rate %d\n", plat->clk_ptp_rate);
>  	}
> 

Reviewed-By: Joao Pinto <jpinto@synopsys.com>

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web