Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1589593 > unrolled thread
| Started by | Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|---|---|
| First post | 2017-02-28 17:20 +0100 |
| Last post | 2017-02-28 17:30 +0100 |
| Articles | 3 — 1 participant |
Back to article view | Back to linux.kernel
[PATCH v3 0/2] media: dt-bindings: extend the vpif bindings Bartosz Golaszewski <bgolaszewski@baylibre.com> - 2017-02-28 17:20 +0100
[PATCH v3 2/2] media: dt-bindings: vpif: extend the example with an output port Bartosz Golaszewski <bgolaszewski@baylibre.com> - 2017-02-28 17:20 +0100
[PATCH v3 1/2] media: dt-bindings: vpif: fix whitespace errors Bartosz Golaszewski <bgolaszewski@baylibre.com> - 2017-02-28 17:30 +0100
| From | Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|---|---|
| Date | 2017-02-28 17:20 +0100 |
| Subject | [PATCH v3 0/2] media: dt-bindings: extend the vpif bindings |
| Message-ID | <tfSFj-6Rj-9@gated-at.bofh.it> |
This series adds pdata quirks and other changes required to make vpif work on the da850-evm board. v1 -> v2: - added patch 3/3 - specified the purpose of port@0 and port@1 nodes v2 -> v3: - removed patch 3/3 - it may take some more time to determine the correct solution for enable-gpios, so I decided to respin the series without it and send it later as a follow-up - added Rob Herring's acks Bartosz Golaszewski (2): media: dt-bindings: vpif: fix whitespace errors media: dt-bindings: vpif: extend the example with an output port .../devicetree/bindings/media/ti,da850-vpif.txt | 50 ++++++++++++++++------ 1 file changed, 37 insertions(+), 13 deletions(-) -- 2.9.3
[toc] | [next] | [standalone]
| From | Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|---|---|
| Date | 2017-02-28 17:20 +0100 |
| Subject | [PATCH v3 2/2] media: dt-bindings: vpif: extend the example with an output port |
| Message-ID | <tfSFk-6Rj-25@gated-at.bofh.it> |
| In reply to | #1589593 |
This makes the example more or less correspond with the da850-evm
hardware setup.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/media/ti,da850-vpif.txt | 40 +++++++++++++++++-----
1 file changed, 32 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
index 9c7510b..df7182a 100644
--- a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
+++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
@@ -16,8 +16,10 @@ Required properties:
Video Capture:
VPIF has a 16-bit parallel bus input, supporting 2 8-bit channels or a
-single 16-bit channel. It should contain at least one port child node
-with child 'endpoint' node. Please refer to the bindings defined in
+single 16-bit channel. It should contain one or two port child nodes
+with child 'endpoint' node. If there are two ports then port@0 must
+describe the input and port@1 output channels. Please refer to the
+bindings defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
Example using 2 8-bit input channels, one of which is connected to an
@@ -28,19 +30,26 @@ I2C-connected TVP5147 decoder:
reg = <0x217000 0x1000>;
interrupts = <92>;
- port {
- vpif_ch0: endpoint@0 {
+ port@0 {
+ vpif_input_ch0: endpoint@0 {
reg = <0>;
bus-width = <8>;
- remote-endpoint = <&composite>;
+ remote-endpoint = <&composite_in>;
};
- vpif_ch1: endpoint@1 {
+ vpif_input_ch1: endpoint@1 {
reg = <1>;
bus-width = <8>;
data-shift = <8>;
};
};
+
+ port@1 {
+ vpif_output_ch0: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&composite_out>;
+ };
+ };
};
[ ... ]
@@ -53,13 +62,28 @@ I2C-connected TVP5147 decoder:
status = "okay";
port {
- composite: endpoint {
+ composite_in: endpoint {
hsync-active = <1>;
vsync-active = <1>;
pclk-sample = <0>;
/* VPIF channel 0 (lower 8-bits) */
- remote-endpoint = <&vpif_ch0>;
+ remote-endpoint = <&vpif_input_ch0>;
+ bus-width = <8>;
+ };
+ };
+ };
+
+ adv7343@2a {
+ compatible = "adi,adv7343";
+ reg = <0x2a>;
+
+ port {
+ composite_out: endpoint {
+ adi,dac-enable = <1 1 1>;
+ adi,sd-dac-enable = <1>;
+
+ remote-endpoint = <&vpif_output_ch0>;
bus-width = <8>;
};
};
--
2.9.3
[toc] | [prev] | [next] | [standalone]
| From | Bartosz Golaszewski <bgolaszewski@baylibre.com> |
|---|---|
| Date | 2017-02-28 17:30 +0100 |
| Subject | [PATCH v3 1/2] media: dt-bindings: vpif: fix whitespace errors |
| Message-ID | <tfSOZ-6Wr-9@gated-at.bofh.it> |
| In reply to | #1589593 |
The examples have been copied from the DT with whitespace errors. Fix
them.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/media/ti,da850-vpif.txt | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
index 6d25d7f..9c7510b 100644
--- a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
+++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
@@ -30,15 +30,15 @@ I2C-connected TVP5147 decoder:
port {
vpif_ch0: endpoint@0 {
- reg = <0>;
- bus-width = <8>;
- remote-endpoint = <&composite>;
+ reg = <0>;
+ bus-width = <8>;
+ remote-endpoint = <&composite>;
};
vpif_ch1: endpoint@1 {
- reg = <1>;
- bus-width = <8>;
- data-shift = <8>;
+ reg = <1>;
+ bus-width = <8>;
+ data-shift = <8>;
};
};
};
--
2.9.3
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web