Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1586669 > unrolled thread

[PATCH v2 0/4] w1: add DS2438 support, documentation and small fixes

Back to article view | Back to linux.kernel

Contents

  [PATCH v2 0/4] w1: add DS2438 support, documentation and small fixes Mariusz Bialonczyk <manio@skyboo.net> - 2017-02-23 07:40 +0100
    [PATCH v2 4/4] w1: w1_ds2760.h: fix defines indentation Mariusz Bialonczyk <manio@skyboo.net> - 2017-02-23 07:40 +0100
    [PATCH v2 1/4] w1: add missing DS2413 documentation Mariusz Bialonczyk <manio@skyboo.net> - 2017-02-23 07:40 +0100
    [PATCH v2 2/4] w1: add support for DS2438 Smart Battery Monitor Mariusz Bialonczyk <manio@skyboo.net> - 2017-02-23 07:40 +0100
    Re: [PATCH v2 0/4] w1: add DS2438 support, documentation and small fixes Evgeniy Polyakov <zbr@ioremap.net> - 2017-02-23 20:00 +0100

#1586669 — [PATCH v2 0/4] w1: add DS2438 support, documentation and small fixes

This is my second version of my w1 patchset.
It mainly adds support for the DS2438. There is also a documentation
for it and also a missing one for DS2413.

Changes since v1:
Cleaned up according to Evgeniy Polyakov suggestions:
1/ changed to have lock/unlock_mutex calls in a single function
   (it was splitted accross more functions)
2/ fix defines indentations
3/ added additional patch which fixes the same defines indentation problem
   in w1_ds2760.h

Mariusz Bialonczyk (4):
  w1: add missing DS2413 documentation
  w1: add support for DS2438 Smart Battery Monitor
  w1: add documentation for w1_ds2438
  w1: w1_ds2760.h: fix defines indentation

 Documentation/w1/slaves/00-INDEX  |   4 +
 Documentation/w1/slaves/w1_ds2413 |  50 +++++
 Documentation/w1/slaves/w1_ds2438 |  63 ++++++
 drivers/w1/slaves/Kconfig         |   6 +
 drivers/w1/slaves/Makefile        |   1 +
 drivers/w1/slaves/w1_ds2438.c     | 390 ++++++++++++++++++++++++++++++++++++++
 drivers/w1/slaves/w1_ds2760.h     |  10 +-
 drivers/w1/w1_family.h            |   1 +
 8 files changed, 521 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/w1/slaves/w1_ds2413
 create mode 100644 Documentation/w1/slaves/w1_ds2438
 create mode 100644 drivers/w1/slaves/w1_ds2438.c

-- 
2.11.0

[toc] | [next] | [standalone]

#1586672 — [PATCH v2 4/4] w1: w1_ds2760.h: fix defines indentation

Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
---
 drivers/w1/slaves/w1_ds2760.h | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/w1/slaves/w1_ds2760.h b/drivers/w1/slaves/w1_ds2760.h
index 58e774141568..24168c94eeae 100644
--- a/drivers/w1/slaves/w1_ds2760.h
+++ b/drivers/w1/slaves/w1_ds2760.h
@@ -24,11 +24,13 @@
 #define DS2760_DATA_SIZE		0x40
 
 #define DS2760_PROTECTION_REG		0x00
+
 #define DS2760_STATUS_REG		0x01
-	#define DS2760_STATUS_IE	(1 << 2)
-	#define DS2760_STATUS_SWEN	(1 << 3)
-	#define DS2760_STATUS_RNAOP	(1 << 4)
-	#define DS2760_STATUS_PMOD	(1 << 5)
+#define DS2760_STATUS_IE		(1 << 2)
+#define DS2760_STATUS_SWEN		(1 << 3)
+#define DS2760_STATUS_RNAOP		(1 << 4)
+#define DS2760_STATUS_PMOD		(1 << 5)
+
 #define DS2760_EEPROM_REG		0x07
 #define DS2760_SPECIAL_FEATURE_REG	0x08
 #define DS2760_VOLTAGE_MSB		0x0c
-- 
2.11.0

[toc] | [prev] | [next] | [standalone]

#1586673 — [PATCH v2 1/4] w1: add missing DS2413 documentation

Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
---
 Documentation/w1/slaves/00-INDEX  |  2 ++
 Documentation/w1/slaves/w1_ds2413 | 50 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 52 insertions(+)
 create mode 100644 Documentation/w1/slaves/w1_ds2413

diff --git a/Documentation/w1/slaves/00-INDEX b/Documentation/w1/slaves/00-INDEX
index 6e18c70c3474..cbcca1d3a680 100644
--- a/Documentation/w1/slaves/00-INDEX
+++ b/Documentation/w1/slaves/00-INDEX
@@ -2,6 +2,8 @@
 	- This file
 w1_therm
 	- The Maxim/Dallas Semiconductor ds18*20 temperature sensor.
+w1_ds2413
+	- The Maxim/Dallas Semiconductor ds2413 dual channel addressable switch.
 w1_ds2423
 	- The Maxim/Dallas Semiconductor ds2423 counter device.
 w1_ds28e04
diff --git a/Documentation/w1/slaves/w1_ds2413 b/Documentation/w1/slaves/w1_ds2413
new file mode 100644
index 000000000000..936263a8ccb4
--- /dev/null
+++ b/Documentation/w1/slaves/w1_ds2413
@@ -0,0 +1,50 @@
+Kernel driver w1_ds2413
+=======================
+
+Supported chips:
+  * Maxim DS2413 1-Wire Dual Channel Addressable Switch
+
+supported family codes:
+        W1_FAMILY_DS2413        0x3A
+
+Author: Mariusz Bialonczyk <manio@skyboo.net>
+
+Description
+-----------
+
+The DS2413 chip has two open-drain outputs (PIO A and PIO B).
+Support is provided through the sysfs files "output" and "state".
+
+Reading state
+-------------
+The "state" file provides one-byte value which is in the same format as for
+the chip PIO_ACCESS_READ command (refer the datasheet for details):
+
+Bit 0:   PIOA Pin State
+Bit 1:   PIOA Output Latch State
+Bit 2:   PIOB Pin State
+Bit 3:   PIOB Output Latch State
+Bit 4-7: Complement of Bit 3 to Bit 0 (verified by the kernel module)
+
+This file is readonly.
+
+Writing output
+--------------
+You can set the PIO pins using the "output" file.
+It is writable, you can write one-byte value to this sysfs file.
+Similarly the byte format is the same as for the PIO_ACCESS_WRITE command:
+
+Bit 0:   PIOA
+Bit 1:   PIOB
+Bit 2-7: No matter (driver will set it to "1"s)
+
+
+The chip has some kind of basic protection against transmission errors.
+When reading the state, there is a four complement bits.
+The driver is checking this complement, and when it is wrong then it is
+returning I/O error.
+
+When writing output, the master must repeat the PIO Output Data byte in
+its inverted form and it is waiting for a confirmation.
+If the write is unsuccessful for three times, the write also returns
+I/O error.
-- 
2.11.0

[toc] | [prev] | [next] | [standalone]

#1586674 — [PATCH v2 2/4] w1: add support for DS2438 Smart Battery Monitor

Detailed information about support and provided sysfs files
in my next commit which creates a documentation file:
Documentation/w1/slaves/w1_ds2438

Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
---
 drivers/w1/slaves/Kconfig     |   6 +
 drivers/w1/slaves/Makefile    |   1 +
 drivers/w1/slaves/w1_ds2438.c | 390 ++++++++++++++++++++++++++++++++++++++++++
 drivers/w1/w1_family.h        |   1 +
 4 files changed, 398 insertions(+)
 create mode 100644 drivers/w1/slaves/w1_ds2438.c

diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index cfe74d09932e..9b4a79782276 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -78,6 +78,12 @@ config W1_SLAVE_DS2433_CRC
 	  Each block has 30 bytes of data and a two byte CRC16.
 	  Full block writes are only allowed if the CRC is valid.
 
+config W1_SLAVE_DS2438
+	tristate "DS2438 Smart Battery Monitor 0x26 family support"
+	help
+	  Say Y here if you want to use a 1-wire
+	  DS2438 Smart Battery Monitor device support
+
 config W1_SLAVE_DS2760
 	tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
 	help
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index 1e9989afe7bf..7ad7a2cf1e12 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_W1_SLAVE_DS2406)	+= w1_ds2406.o
 obj-$(CONFIG_W1_SLAVE_DS2423)	+= w1_ds2423.o
 obj-$(CONFIG_W1_SLAVE_DS2431)	+= w1_ds2431.o
 obj-$(CONFIG_W1_SLAVE_DS2433)	+= w1_ds2433.o
+obj-$(CONFIG_W1_SLAVE_DS2438)	+= w1_ds2438.o
 obj-$(CONFIG_W1_SLAVE_DS2760)	+= w1_ds2760.o
 obj-$(CONFIG_W1_SLAVE_DS2780)	+= w1_ds2780.o
 obj-$(CONFIG_W1_SLAVE_DS2781)	+= w1_ds2781.o
diff --git a/drivers/w1/slaves/w1_ds2438.c b/drivers/w1/slaves/w1_ds2438.c
new file mode 100644
index 000000000000..5ededb4965e1
--- /dev/null
+++ b/drivers/w1/slaves/w1_ds2438.c
@@ -0,0 +1,390 @@
+/*
+ * 1-Wire implementation for the ds2438 chip
+ *
+ * Copyright (c) 2017 Mariusz Bialonczyk <manio@skyboo.net>
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+
+#include "../w1.h"
+#include "../w1_family.h"
+
+#define W1_DS2438_RETRIES		3
+
+/* Memory commands */
+#define W1_DS2438_READ_SCRATCH		0xBE
+#define W1_DS2438_WRITE_SCRATCH		0x4E
+#define W1_DS2438_COPY_SCRATCH		0x48
+#define W1_DS2438_RECALL_MEMORY		0xB8
+/* Register commands */
+#define W1_DS2438_CONVERT_TEMP		0x44
+#define W1_DS2438_CONVERT_VOLTAGE	0xB4
+
+#define DS2438_PAGE_SIZE		8
+#define DS2438_ADC_INPUT_VAD		0
+#define DS2438_ADC_INPUT_VDD		1
+#define DS2438_MAX_CONVERSION_TIME	10		/* ms */
+
+/* Page #0 definitions */
+#define DS2438_STATUS_REG		0x00		/* Status/Configuration Register */
+#define DS2438_STATUS_IAD		(1 << 0)	/* Current A/D Control Bit */
+#define DS2438_STATUS_CA		(1 << 1)	/* Current Accumulator Configuration */
+#define DS2438_STATUS_EE		(1 << 2)	/* Current Accumulator Shadow Selector bit */
+#define DS2438_STATUS_AD		(1 << 3)	/* Voltage A/D Input Select Bit */
+#define DS2438_STATUS_TB		(1 << 4)	/* Temperature Busy Flag */
+#define DS2438_STATUS_NVB		(1 << 5)	/* Nonvolatile Memory Busy Flag */
+#define DS2438_STATUS_ADB		(1 << 6)	/* A/D Converter Busy Flag */
+
+#define DS2438_TEMP_LSB			0x01
+#define DS2438_TEMP_MSB			0x02
+#define DS2438_VOLTAGE_LSB		0x03
+#define DS2438_VOLTAGE_MSB		0x04
+#define DS2438_CURRENT_LSB		0x05
+#define DS2438_CURRENT_MSB		0x06
+#define DS2438_THRESHOLD		0x07
+
+int w1_ds2438_get_page(struct w1_slave *sl, int pageno, u8 *buf)
+{
+	unsigned int retries = W1_DS2438_RETRIES;
+	u8 w1_buf[2];
+	u8 crc;
+	size_t count;
+
+	while (retries--) {
+		crc = 0;
+
+		if (w1_reset_select_slave(sl))
+			continue;
+		w1_buf[0] = W1_DS2438_RECALL_MEMORY;
+		w1_buf[1] = 0x00;
+		w1_write_block(sl->master, w1_buf, 2);
+
+		if (w1_reset_select_slave(sl))
+			continue;
+		w1_buf[0] = W1_DS2438_READ_SCRATCH;
+		w1_buf[1] = 0x00;
+		w1_write_block(sl->master, w1_buf, 2);
+
+		count = w1_read_block(sl->master, buf, DS2438_PAGE_SIZE + 1);
+		if (count == DS2438_PAGE_SIZE + 1) {
+			crc = w1_calc_crc8(buf, DS2438_PAGE_SIZE);
+
+			/* check for correct CRC */
+			if ((u8)buf[DS2438_PAGE_SIZE] == crc)
+				return 0;
+		}
+	}
+	return -1;
+}
+
+int w1_ds2438_get_temperature(struct w1_slave *sl, int16_t *temperature)
+{
+	unsigned int retries = W1_DS2438_RETRIES;
+	u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
+	unsigned int tm = DS2438_MAX_CONVERSION_TIME;
+	unsigned long sleep_rem;
+	int ret;
+
+	mutex_lock(&sl->master->bus_mutex);
+
+	while (retries--) {
+		if (w1_reset_select_slave(sl))
+			continue;
+		w1_write_8(sl->master, W1_DS2438_CONVERT_TEMP);
+
+		mutex_unlock(&sl->master->bus_mutex);
+		sleep_rem = msleep_interruptible(tm);
+		if (sleep_rem != 0) {
+			ret = -1;
+			goto post_unlock;
+		}
+
+		if (mutex_lock_interruptible(&sl->master->bus_mutex) != 0) {
+			ret = -1;
+			goto post_unlock;
+		}
+
+		break;
+	}
+
+	if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) {
+		*temperature = (((int16_t) w1_buf[DS2438_TEMP_MSB]) << 8) | ((uint16_t) w1_buf[DS2438_TEMP_LSB]);
+		ret = 0;
+	} else
+		ret = -1;
+
+	mutex_unlock(&sl->master->bus_mutex);
+
+post_unlock:
+	return ret;
+}
+
+int w1_ds2438_change_config_bit(struct w1_slave *sl, u8 mask, u8 value)
+{
+	unsigned int retries = W1_DS2438_RETRIES;
+	u8 w1_buf[3];
+	u8 status;
+	int perform_write = 0;
+
+	while (retries--) {
+		if (w1_reset_select_slave(sl))
+			continue;
+		w1_buf[0] = W1_DS2438_RECALL_MEMORY;
+		w1_buf[1] = 0x00;
+		w1_write_block(sl->master, w1_buf, 2);
+
+		if (w1_reset_select_slave(sl))
+			continue;
+		w1_buf[0] = W1_DS2438_READ_SCRATCH;
+		w1_buf[1] = 0x00;
+		w1_write_block(sl->master, w1_buf, 2);
+
+		/* reading one byte of result */
+		status = w1_read_8(sl->master);
+
+		/* if bit0=1, set a value to a mask for easy compare */
+		if (value)
+			value = mask;
+
+		if ((status & mask) == value)
+			return 0;	/* already set as requested */
+		else {
+			/* changing bit */
+			status ^= mask;
+			perform_write = 1;
+		}
+		break;
+	}
+
+	if (perform_write) {
+		retries = W1_DS2438_RETRIES;
+		while (retries--) {
+			if (w1_reset_select_slave(sl))
+				continue;
+			w1_buf[0] = W1_DS2438_WRITE_SCRATCH;
+			w1_buf[1] = 0x00;
+			w1_buf[2] = status;
+			w1_write_block(sl->master, w1_buf, 3);
+
+			if (w1_reset_select_slave(sl))
+				continue;
+			w1_buf[0] = W1_DS2438_COPY_SCRATCH;
+			w1_buf[1] = 0x00;
+			w1_write_block(sl->master, w1_buf, 2);
+
+			return 0;
+		}
+	}
+	return -1;
+}
+
+uint16_t w1_ds2438_get_voltage(struct w1_slave *sl, int adc_input, uint16_t *voltage)
+{
+	unsigned int retries = W1_DS2438_RETRIES;
+	u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
+	unsigned int tm = DS2438_MAX_CONVERSION_TIME;
+	unsigned long sleep_rem;
+	int ret;
+
+	mutex_lock(&sl->master->bus_mutex);
+
+	if (w1_ds2438_change_config_bit(sl, DS2438_STATUS_AD, adc_input)) {
+		ret = -1;
+		goto pre_unlock;
+	}
+
+	while (retries--) {
+		if (w1_reset_select_slave(sl))
+			continue;
+		w1_write_8(sl->master, W1_DS2438_CONVERT_VOLTAGE);
+
+		mutex_unlock(&sl->master->bus_mutex);
+		sleep_rem = msleep_interruptible(tm);
+		if (sleep_rem != 0) {
+			ret = -1;
+			goto post_unlock;
+		}
+
+		if (mutex_lock_interruptible(&sl->master->bus_mutex) != 0) {
+			ret = -1;
+			goto post_unlock;
+		}
+
+		break;
+	}
+
+	if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) {
+		*voltage = (((uint16_t) w1_buf[DS2438_VOLTAGE_MSB]) << 8) | ((uint16_t) w1_buf[DS2438_VOLTAGE_LSB]);
+		ret = 0;
+	} else
+		ret = -1;
+
+pre_unlock:
+	mutex_unlock(&sl->master->bus_mutex);
+
+post_unlock:
+	return ret;
+}
+
+static ssize_t iad_write(struct file *filp, struct kobject *kobj,
+			 struct bin_attribute *bin_attr, char *buf,
+			 loff_t off, size_t count)
+{
+	struct w1_slave *sl = kobj_to_w1_slave(kobj);
+	int ret;
+
+	if (count != 1 || off != 0)
+		return -EFAULT;
+
+	mutex_lock(&sl->master->bus_mutex);
+
+	if (w1_ds2438_change_config_bit(sl, DS2438_STATUS_IAD, *buf & 0x01) == 0)
+		ret = 1;
+	else
+		ret = -EIO;
+
+	mutex_unlock(&sl->master->bus_mutex);
+
+	return ret;
+}
+
+static ssize_t page0_read(struct file *filp, struct kobject *kobj,
+			  struct bin_attribute *bin_attr, char *buf,
+			  loff_t off, size_t count)
+{
+	struct w1_slave *sl = kobj_to_w1_slave(kobj);
+	int ret;
+	u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/];
+
+	if (off != 0)
+		return 0;
+	if (!buf)
+		return -EINVAL;
+
+	mutex_lock(&sl->master->bus_mutex);
+
+	if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) {
+		memcpy(buf, &w1_buf, DS2438_PAGE_SIZE);
+		ret = DS2438_PAGE_SIZE;
+	} else
+		ret = -EIO;
+
+	mutex_unlock(&sl->master->bus_mutex);
+
+	return ret;
+}
+
+static ssize_t temperature_read(struct file *filp, struct kobject *kobj,
+				struct bin_attribute *bin_attr, char *buf,
+				loff_t off, size_t count)
+{
+	struct w1_slave *sl = kobj_to_w1_slave(kobj);
+	int ret;
+	ssize_t c = PAGE_SIZE;
+	int16_t temp;
+
+	if (off != 0)
+		return 0;
+	if (!buf)
+		return -EINVAL;
+
+	if (w1_ds2438_get_temperature(sl, &temp) == 0) {
+		c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", temp);
+		ret = PAGE_SIZE - c;
+	} else
+		ret = -EIO;
+
+	return ret;
+}
+
+static ssize_t vad_read(struct file *filp, struct kobject *kobj,
+			struct bin_attribute *bin_attr, char *buf,
+			loff_t off, size_t count)
+{
+	struct w1_slave *sl = kobj_to_w1_slave(kobj);
+	int ret;
+	ssize_t c = PAGE_SIZE;
+	uint16_t voltage;
+
+	if (off != 0)
+		return 0;
+	if (!buf)
+		return -EINVAL;
+
+	if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VAD, &voltage) == 0) {
+		c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", voltage);
+		ret = PAGE_SIZE - c;
+	} else
+		ret = -EIO;
+
+	return ret;
+}
+
+static ssize_t vdd_read(struct file *filp, struct kobject *kobj,
+			struct bin_attribute *bin_attr, char *buf,
+			loff_t off, size_t count)
+{
+	struct w1_slave *sl = kobj_to_w1_slave(kobj);
+	int ret;
+	ssize_t c = PAGE_SIZE;
+	uint16_t voltage;
+
+	if (off != 0)
+		return 0;
+	if (!buf)
+		return -EINVAL;
+
+	if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VDD, &voltage) == 0) {
+		c -= snprintf(buf + PAGE_SIZE - c, c, "%d\n", voltage);
+		ret = PAGE_SIZE - c;
+	} else
+		ret = -EIO;
+
+	return ret;
+}
+
+static BIN_ATTR(iad, S_IRUGO | S_IWUSR | S_IWGRP, NULL, iad_write, 1);
+static BIN_ATTR_RO(page0, DS2438_PAGE_SIZE);
+static BIN_ATTR_RO(temperature, 0/* real length varies */);
+static BIN_ATTR_RO(vad, 0/* real length varies */);
+static BIN_ATTR_RO(vdd, 0/* real length varies */);
+
+static struct bin_attribute *w1_ds2438_bin_attrs[] = {
+	&bin_attr_iad,
+	&bin_attr_page0,
+	&bin_attr_temperature,
+	&bin_attr_vad,
+	&bin_attr_vdd,
+	NULL,
+};
+
+static const struct attribute_group w1_ds2438_group = {
+	.bin_attrs = w1_ds2438_bin_attrs,
+};
+
+static const struct attribute_group *w1_ds2438_groups[] = {
+	&w1_ds2438_group,
+	NULL,
+};
+
+static struct w1_family_ops w1_ds2438_fops = {
+	.groups		= w1_ds2438_groups,
+};
+
+static struct w1_family w1_ds2438_family = {
+	.fid = W1_FAMILY_DS2438,
+	.fops = &w1_ds2438_fops,
+};
+module_w1_family(w1_ds2438_family);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mariusz Bialonczyk <manio@skyboo.net>");
+MODULE_DESCRIPTION("1-wire driver for Maxim/Dallas DS2438 Smart Battery Monitor");
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2438));
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
index 10a7a0767187..627c90a1cb4e 100644
--- a/drivers/w1/w1_family.h
+++ b/drivers/w1/w1_family.h
@@ -35,6 +35,7 @@
 #define W1_COUNTER_DS2423	0x1D
 #define W1_THERM_DS1822  	0x22
 #define W1_EEPROM_DS2433  	0x23
+#define W1_FAMILY_DS2438	0x26
 #define W1_THERM_DS18B20 	0x28
 #define W1_FAMILY_DS2408	0x29
 #define W1_EEPROM_DS2431	0x2D
-- 
2.11.0

[toc] | [prev] | [next] | [standalone]

#1587089

Hi everyone

23.02.2017, 09:38, "Mariusz Bialonczyk" <manio@skyboo.net>:
> This is my second version of my w1 patchset.
> It mainly adds support for the DS2438. There is also a documentation
> for it and also a missing one for DS2413.

Looks good to me, thank you

Greg, please pull it into your tree

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web