Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1681719 > unrolled thread
| Started by | Patrick Venture <venture@google.com> |
|---|---|
| First post | 2017-07-05 21:10 +0200 |
| Last post | 2017-07-05 21:50 +0200 |
| Articles | 3 — 2 participants |
Back to article view | Back to linux.kernel
[PATCH v2] drivers/misc: (aspeed-lpc-snoop): Add ast2400 to compat Patrick Venture <venture@google.com> - 2017-07-05 21:10 +0200
Re: [PATCH v2] drivers/misc: (aspeed-lpc-snoop): Add ast2400 to compat Patrick Venture <venture@google.com> - 2017-07-05 21:50 +0200
Re: [PATCH v2] drivers/misc: (aspeed-lpc-snoop): Add ast2400 to compat Arnd Bergmann <arnd@arndb.de> - 2017-07-05 21:50 +0200
| From | Patrick Venture <venture@google.com> |
|---|---|
| Date | 2017-07-05 21:10 +0200 |
| Subject | [PATCH v2] drivers/misc: (aspeed-lpc-snoop): Add ast2400 to compat |
| Message-ID | <tZXQv-1WT-35@gated-at.bofh.it> |
This driver can be used on the aspeed ast2400 with minor
modifications.
Tested: ast2400 on quanta-q71l
Signed-off-by: Patrick Venture <venture@google.com>
---
v2: added aspeed-g5 area because ast2400 doesn't use those bits.
also updated commit message.
---
drivers/misc/aspeed-lpc-snoop.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/aspeed-lpc-snoop.c b/drivers/misc/aspeed-lpc-snoop.c
index 593905565b74..83f9a9e5a7cf 100644
--- a/drivers/misc/aspeed-lpc-snoop.c
+++ b/drivers/misc/aspeed-lpc-snoop.c
@@ -155,8 +155,9 @@ static int aspeed_lpc_enable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
regmap_update_bits(lpc_snoop->regmap, HICR5, hicr5_en, hicr5_en);
regmap_update_bits(lpc_snoop->regmap, SNPWADR, snpwadr_mask,
lpc_port << snpwadr_shift);
+#ifdef CONFIG_MACH_ASPEED_G5
regmap_update_bits(lpc_snoop->regmap, HICRB, hicrb_en, hicrb_en);
-
+#endif
return rc;
}
@@ -241,6 +242,7 @@ static int aspeed_lpc_snoop_remove(struct platform_device *pdev)
static const struct of_device_id aspeed_lpc_snoop_match[] = {
{ .compatible = "aspeed,ast2500-lpc-snoop" },
+ { .compatible = "aspeed,ast2400-lpc-snoop" },
{ },
};
--
2.13.2.725.g09c95d1e9-goog
[toc] | [next] | [standalone]
| From | Patrick Venture <venture@google.com> |
|---|---|
| Date | 2017-07-05 21:50 +0200 |
| Message-ID | <tZYtb-2gN-7@gated-at.bofh.it> |
| In reply to | #1681719 |
On Wed, Jul 5, 2017 at 12:43 PM, Arnd Bergmann <arnd@arndb.de> wrote: > On Wed, Jul 5, 2017 at 9:04 PM, Patrick Venture <venture@google.com> wrote: >> This driver can be used on the aspeed ast2400 with minor >> modifications. >> >> Tested: ast2400 on quanta-q71l >> >> Signed-off-by: Patrick Venture <venture@google.com> >> --- >> v2: added aspeed-g5 area because ast2400 doesn't use those bits. >> also updated commit message. >> --- >> drivers/misc/aspeed-lpc-snoop.c | 4 +++- >> 1 file changed, 3 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/misc/aspeed-lpc-snoop.c b/drivers/misc/aspeed-lpc-snoop.c >> index 593905565b74..83f9a9e5a7cf 100644 >> --- a/drivers/misc/aspeed-lpc-snoop.c >> +++ b/drivers/misc/aspeed-lpc-snoop.c >> @@ -155,8 +155,9 @@ static int aspeed_lpc_enable_snoop(struct aspeed_lpc_snoop *lpc_snoop, >> regmap_update_bits(lpc_snoop->regmap, HICR5, hicr5_en, hicr5_en); >> regmap_update_bits(lpc_snoop->regmap, SNPWADR, snpwadr_mask, >> lpc_port << snpwadr_shift); >> +#ifdef CONFIG_MACH_ASPEED_G5 >> regmap_update_bits(lpc_snoop->regmap, HICRB, hicrb_en, hicrb_en); >> - >> +#endif >> return rc; >> } > > Hi Patrick, > > Sorry for bringing up yet another point on a fairly trivial patch, but > in general, > I'd recommend making this a runtime check rather than compile-time. > > At the moment, your version is safe because CONFIG_MACH_ASPEED_G5 > and CONFIG_MACH_ASPEED_G4 are mutually exclusive and there is > always one of them set, but once we get support for G6, G7 etc, > the driver might silently break when it behaves differently depending > on a configuration option that may or may not be set on a particular > kernel build. > > You can use the .data field in the of_device_id to add a trigger for the > behavior change. > > Arnd No problem whatsoever. You're quite right. I forgot about future aspeed platforms. I'm going to dig around a few drivers and see what the right way is to handle this at run-time. Presumably something like: #ifdef CONFIG_MACH_ASPEED_G4 .data = G4, #else .data = G5, #endif Since we're holding that maybe the future should default to this behaviour. Is it linux standard to do something like #(error) in the #else so that it fails if they didn't update this driver instead of defaulting to the G5 setting? Thanks, Patrick
[toc] | [prev] | [next] | [standalone]
| From | Arnd Bergmann <arnd@arndb.de> |
|---|---|
| Date | 2017-07-05 21:50 +0200 |
| Message-ID | <tZYtb-2gN-5@gated-at.bofh.it> |
| In reply to | #1681719 |
On Wed, Jul 5, 2017 at 9:04 PM, Patrick Venture <venture@google.com> wrote:
> This driver can be used on the aspeed ast2400 with minor
> modifications.
>
> Tested: ast2400 on quanta-q71l
>
> Signed-off-by: Patrick Venture <venture@google.com>
> ---
> v2: added aspeed-g5 area because ast2400 doesn't use those bits.
> also updated commit message.
> ---
> drivers/misc/aspeed-lpc-snoop.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/misc/aspeed-lpc-snoop.c b/drivers/misc/aspeed-lpc-snoop.c
> index 593905565b74..83f9a9e5a7cf 100644
> --- a/drivers/misc/aspeed-lpc-snoop.c
> +++ b/drivers/misc/aspeed-lpc-snoop.c
> @@ -155,8 +155,9 @@ static int aspeed_lpc_enable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
> regmap_update_bits(lpc_snoop->regmap, HICR5, hicr5_en, hicr5_en);
> regmap_update_bits(lpc_snoop->regmap, SNPWADR, snpwadr_mask,
> lpc_port << snpwadr_shift);
> +#ifdef CONFIG_MACH_ASPEED_G5
> regmap_update_bits(lpc_snoop->regmap, HICRB, hicrb_en, hicrb_en);
> -
> +#endif
> return rc;
> }
Hi Patrick,
Sorry for bringing up yet another point on a fairly trivial patch, but
in general,
I'd recommend making this a runtime check rather than compile-time.
At the moment, your version is safe because CONFIG_MACH_ASPEED_G5
and CONFIG_MACH_ASPEED_G4 are mutually exclusive and there is
always one of them set, but once we get support for G6, G7 etc,
the driver might silently break when it behaves differently depending
on a configuration option that may or may not be set on a particular
kernel build.
You can use the .data field in the of_device_id to add a trigger for the
behavior change.
Arnd
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web