Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1679217 > unrolled thread
| Started by | Eduardo Valentin <edubezval@gmail.com> |
|---|---|
| First post | 2017-07-01 02:00 +0200 |
| Last post | 2017-07-01 02:00 +0200 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH 1/4] arm64: tegra: Add BPMP thermal sensor to Tegra186 Eduardo Valentin <edubezval@gmail.com> - 2017-07-01 02:00 +0200
| From | Eduardo Valentin <edubezval@gmail.com> |
|---|---|
| Date | 2017-07-01 02:00 +0200 |
| Subject | Re: [PATCH 1/4] arm64: tegra: Add BPMP thermal sensor to Tegra186 |
| Message-ID | <tYdZn-3AK-3@gated-at.bofh.it> |
On Fri, Jun 16, 2017 at 02:28:22PM +0300, Mikko Perttunen wrote:
> This adds the thermal sensor device provided by the BPMP, and the
> relevant thermal sensors to the Tegra186 device tree.
>
> Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
> ---
> arch/arm64/boot/dts/nvidia/tegra186.dtsi | 48 ++++++++++++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> index 5e62e68ac053..5c19ea74da24 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
> @@ -4,6 +4,7 @@
> #include <dt-bindings/mailbox/tegra186-hsp.h>
> #include <dt-bindings/power/tegra186-powergate.h>
> #include <dt-bindings/reset/tegra186-reset.h>
> +#include <dt-bindings/thermal/tegra186-bpmp-thermal.h>
>
> / {
> compatible = "nvidia,tegra186";
> @@ -444,6 +445,53 @@
> #size-cells = <0>;
> status = "disabled";
> };
> +
> + bpmp_thermal: thermal {
> + compatible = "nvidia,tegra186-bpmp-thermal";
> + #thermal-sensor-cells = <1>;
> + };
> + };
> +
> + thermal-zones {
> + a57 {
> + polling-delay = <0>;
> + polling-delay-passive = <1000>;
> +
> + thermal-sensors =
> + <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_CPU>;
> + };
> +
> + denver {
> + polling-delay = <0>;
> + polling-delay-passive = <1000>;
> +
> + thermal-sensors =
> + <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AUX>;
> + };
> +
> + gpu {
> + polling-delay = <0>;
> + polling-delay-passive = <1000>;
> +
> + thermal-sensors =
> + <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_GPU>;
> + };
> +
> + pll {
> + polling-delay = <0>;
> + polling-delay-passive = <1000>;
> +
> + thermal-sensors =
> + <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_PLLX>;
> + };
> +
> + always_on {
> + polling-delay = <0>;
> + polling-delay-passive = <1000>;
> +
> + thermal-sensors =
> + <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AO>;
> + };
All the above zones are lacking mandatory fields. Please refer to the
thermal binding documentation.
> };
>
> timer {
> --
> 2.13.1
>
Back to top | Article view | linux.kernel
csiph-web