Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1677284 > unrolled thread
| Started by | Christopher Bostic <cbostic@linux.vnet.ibm.com> |
|---|---|
| First post | 2017-06-29 02:30 +0200 |
| Last post | 2017-06-29 02:30 +0200 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH v3 2/2] drivers/watchdog: ASPEED reference dev tree properties for config Christopher Bostic <cbostic@linux.vnet.ibm.com> - 2017-06-29 02:30 +0200
| From | Christopher Bostic <cbostic@linux.vnet.ibm.com> |
|---|---|
| Date | 2017-06-29 02:30 +0200 |
| Subject | [PATCH v3 2/2] drivers/watchdog: ASPEED reference dev tree properties for config |
| Message-ID | <tXvvk-rh-7@gated-at.bofh.it> |
Reference the system device tree when configuring the watchdog
engines. If optional property 'aspeed,no-sys-reset' is specified
then override the default config and do not set sys reset mode.
If optional property 'aspeed,no-soc-reset' is specified then
override the default and do not set soc reset mode.
Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
---
v3 - Invert the logic for system reset dev tree property to
preserve backwards compatibility. If not specified the
default is to configure for system reset
- Add check for 'aspeed,no-soc-reset' property and only if
not present is SOC reset to be configured. This preserves
backwards compatibility.
v2 - Change of_get_property() to of_property_read_bool()
- Remove redundant check for NULL struct device_node pointer
- Optional property names now start with prefix 'aspeed,'
---
drivers/watchdog/aspeed_wdt.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
index 1c65258..ace74f8 100644
--- a/drivers/watchdog/aspeed_wdt.c
+++ b/drivers/watchdog/aspeed_wdt.c
@@ -140,6 +140,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
{
struct aspeed_wdt *wdt;
struct resource *res;
+ struct device_node *np;
int ret;
wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
@@ -166,12 +167,21 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
/*
* Control reset on a per-device basis to ensure the
- * host is not affected by a BMC reboot, so only reset
- * the SOC and not the full chip
+ * host is not affected by a BMC reboot
*/
- wdt->ctrl = WDT_CTRL_RESET_MODE_SOC |
- WDT_CTRL_1MHZ_CLK |
- WDT_CTRL_RESET_SYSTEM;
+ wdt->ctrl = WDT_CTRL_1MHZ_CLK;
+
+ np = pdev->dev.of_node;
+ if (!(of_property_read_bool(np, "aspeed,no-soc-reset")))
+ wdt->ctrl |= WDT_CTRL_RESET_MODE_SOC;
+
+ if (!(of_property_read_bool(np, "aspeed,no-sys-reset")))
+ wdt->ctrl |= WDT_CTRL_RESET_SYSTEM;
+
+ if (of_property_read_bool(np, "aspeed,external-signal"))
+ wdt->ctrl |= WDT_CTRL_WDT_EXT;
+
+ writel(wdt->ctrl, wdt->base + WDT_CTRL);
if (readl(wdt->base + WDT_CTRL) & WDT_CTRL_ENABLE) {
aspeed_wdt_start(&wdt->wdd);
--
1.8.2.2
Back to top | Article view | linux.kernel
csiph-web