Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1674584 > unrolled thread

[PATCH 0/2] rtc: add support for STM32H7 RTC

Back to article view | Back to linux.kernel

Contents

  [PATCH 0/2] rtc: add support for STM32H7 RTC Amelie Delaunay <amelie.delaunay@st.com> - 2017-06-26 12:00 +0200
    [PATCH 2/2] rtc: stm32: add STM32H7 RTC support Amelie Delaunay <amelie.delaunay@st.com> - 2017-06-26 12:00 +0200
    [PATCH 1/2] dt-bindings: rtc: stm32: add support for STM32H7 Amelie Delaunay <amelie.delaunay@st.com> - 2017-06-26 12:00 +0200
      Re: [PATCH 1/2] dt-bindings: rtc: stm32: add support for STM32H7 Rob Herring <robh@kernel.org> - 2017-06-28 20:10 +0200

#1674584 — [PATCH 0/2] rtc: add support for STM32H7 RTC

Add support for STM32H7 Real Time Clock variant.
Difference is regarding clocks: there is a 'pclk' clock on STM32H7
for register access.

Amelie Delaunay (2):
  dt-bindings: rtc: stm32: add support for STM32H7
  rtc: stm32: add STM32H7 RTC support

 .../devicetree/bindings/rtc/st,stm32-rtc.txt       | 32 ++++++--
 drivers/rtc/rtc-stm32.c                            | 85 +++++++++++++++++-----
 2 files changed, 95 insertions(+), 22 deletions(-)

-- 
1.9.1

[toc] | [next] | [standalone]

#1674591 — [PATCH 2/2] rtc: stm32: add STM32H7 RTC support

This patch adds support for STM32H7 RTC. On STM32H7, the RTC bus interface
clock (APB clock) needs to be enabled.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
 drivers/rtc/rtc-stm32.c | 85 +++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 68 insertions(+), 17 deletions(-)

diff --git a/drivers/rtc/rtc-stm32.c b/drivers/rtc/rtc-stm32.c
index bd57eb1..22f988b 100644
--- a/drivers/rtc/rtc-stm32.c
+++ b/drivers/rtc/rtc-stm32.c
@@ -94,11 +94,17 @@
 /* STM32_PWR_CR bit field */
 #define PWR_CR_DBP			BIT(8)
 
+struct stm32_rtc_data {
+	bool has_pclk;
+};
+
 struct stm32_rtc {
 	struct rtc_device *rtc_dev;
 	void __iomem *base;
 	struct regmap *dbp;
-	struct clk *ck_rtc;
+	struct stm32_rtc_data *data;
+	struct clk *pclk;
+	struct clk *rtc_ck;
 	int irq_alarm;
 };
 
@@ -122,9 +128,9 @@ static int stm32_rtc_enter_init_mode(struct stm32_rtc *rtc)
 		writel_relaxed(isr, rtc->base + STM32_RTC_ISR);
 
 		/*
-		 * It takes around 2 ck_rtc clock cycles to enter in
+		 * It takes around 2 rtc_ck clock cycles to enter in
 		 * initialization phase mode (and have INITF flag set). As
-		 * slowest ck_rtc frequency may be 32kHz and highest should be
+		 * slowest rtc_ck frequency may be 32kHz and highest should be
 		 * 1MHz, we poll every 10 us with a timeout of 100ms.
 		 */
 		return readl_relaxed_poll_timeout_atomic(
@@ -153,7 +159,7 @@ static int stm32_rtc_wait_sync(struct stm32_rtc *rtc)
 
 	/*
 	 * Wait for RSF to be set to ensure the calendar registers are
-	 * synchronised, it takes around 2 ck_rtc clock cycles
+	 * synchronised, it takes around 2 rtc_ck clock cycles
 	 */
 	return readl_relaxed_poll_timeout_atomic(rtc->base + STM32_RTC_ISR,
 						 isr,
@@ -456,7 +462,7 @@ static int stm32_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 	/*
 	 * Poll Alarm write flag to be sure that Alarm update is allowed: it
-	 * takes around 2 ck_rtc clock cycles
+	 * takes around 2 rtc_ck clock cycles
 	 */
 	ret = readl_relaxed_poll_timeout_atomic(rtc->base + STM32_RTC_ISR,
 						isr,
@@ -490,8 +496,17 @@ static int stm32_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	.alarm_irq_enable = stm32_rtc_alarm_irq_enable,
 };
 
+static const struct stm32_rtc_data stm32_rtc_data = {
+	.has_pclk = false,
+};
+
+static const struct stm32_rtc_data stm32h7_rtc_data = {
+	.has_pclk = true,
+};
+
 static const struct of_device_id stm32_rtc_of_match[] = {
-	{ .compatible = "st,stm32-rtc" },
+	{ .compatible = "st,stm32-rtc", .data = &stm32_rtc_data },
+	{ .compatible = "st,stm32h7-rtc", .data = &stm32h7_rtc_data },
 	{}
 };
 MODULE_DEVICE_TABLE(of, stm32_rtc_of_match);
@@ -503,7 +518,7 @@ static int stm32_rtc_init(struct platform_device *pdev,
 	unsigned int rate;
 	int ret = 0;
 
-	rate = clk_get_rate(rtc->ck_rtc);
+	rate = clk_get_rate(rtc->rtc_ck);
 
 	/* Find prediv_a and prediv_s to obtain the 1Hz calendar clock */
 	pred_a_max = STM32_RTC_PRER_PRED_A >> STM32_RTC_PRER_PRED_A_SHIFT;
@@ -524,7 +539,7 @@ static int stm32_rtc_init(struct platform_device *pdev,
 		pred_a = pred_a_max;
 		pred_s = (rate / (pred_a + 1)) - 1;
 
-		dev_warn(&pdev->dev, "ck_rtc is %s\n",
+		dev_warn(&pdev->dev, "rtc_ck is %s\n",
 			 (rate < ((pred_a + 1) * (pred_s + 1))) ?
 			 "fast" : "slow");
 	}
@@ -561,6 +576,7 @@ static int stm32_rtc_probe(struct platform_device *pdev)
 {
 	struct stm32_rtc *rtc;
 	struct resource *res;
+	const struct of_device_id *match;
 	int ret;
 
 	rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
@@ -579,15 +595,37 @@ static int stm32_rtc_probe(struct platform_device *pdev)
 		return PTR_ERR(rtc->dbp);
 	}
 
-	rtc->ck_rtc = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(rtc->ck_rtc)) {
-		dev_err(&pdev->dev, "no ck_rtc clock");
-		return PTR_ERR(rtc->ck_rtc);
+	match = of_match_device(stm32_rtc_of_match, &pdev->dev);
+	if (match && match->data)
+		rtc->data = (struct stm32_rtc_data *)match->data;
+	else
+		return -EINVAL;
+
+	if (!rtc->data->has_pclk) {
+		rtc->pclk = NULL;
+		rtc->rtc_ck = devm_clk_get(&pdev->dev, NULL);
+	} else {
+		rtc->pclk = devm_clk_get(&pdev->dev, "pclk");
+		if (rtc->data->has_pclk && IS_ERR(rtc->pclk)) {
+			dev_err(&pdev->dev, "no pclk clock");
+			return PTR_ERR(rtc->rtc_ck);
+		}
+		rtc->rtc_ck = devm_clk_get(&pdev->dev, "rtc_ck");
+	}
+	if (IS_ERR(rtc->rtc_ck)) {
+		dev_err(&pdev->dev, "no rtc_ck clock");
+		return PTR_ERR(rtc->rtc_ck);
 	}
 
-	ret = clk_prepare_enable(rtc->ck_rtc);
+	if (rtc->data->has_pclk) {
+		ret = clk_prepare_enable(rtc->pclk);
+		if (ret)
+			return ret;
+	}
+
+	ret = clk_prepare_enable(rtc->rtc_ck);
 	if (ret)
-		return ret;
+		goto err;
 
 	regmap_update_bits(rtc->dbp, PWR_CR, PWR_CR_DBP, PWR_CR_DBP);
 
@@ -595,7 +633,7 @@ static int stm32_rtc_probe(struct platform_device *pdev)
 	 * After a system reset, RTC_ISR.INITS flag can be read to check if
 	 * the calendar has been initalized or not. INITS flag is reset by a
 	 * power-on reset (no vbat, no power-supply). It is not reset if
-	 * ck_rtc parent clock has changed (so RTC prescalers need to be
+	 * rtc_ck parent clock has changed (so RTC prescalers need to be
 	 * changed). That's why we cannot rely on this flag to know if RTC
 	 * init has to be done.
 	 */
@@ -646,7 +684,9 @@ static int stm32_rtc_probe(struct platform_device *pdev)
 
 	return 0;
 err:
-	clk_disable_unprepare(rtc->ck_rtc);
+	if (rtc->data->has_pclk)
+		clk_disable_unprepare(rtc->pclk);
+	clk_disable_unprepare(rtc->rtc_ck);
 
 	regmap_update_bits(rtc->dbp, PWR_CR, PWR_CR_DBP, 0);
 
@@ -667,7 +707,9 @@ static int stm32_rtc_remove(struct platform_device *pdev)
 	writel_relaxed(cr, rtc->base + STM32_RTC_CR);
 	stm32_rtc_wpr_lock(rtc);
 
-	clk_disable_unprepare(rtc->ck_rtc);
+	clk_disable_unprepare(rtc->rtc_ck);
+	if (rtc->data->has_pclk)
+		clk_disable_unprepare(rtc->pclk);
 
 	/* Enable backup domain write protection */
 	regmap_update_bits(rtc->dbp, PWR_CR, PWR_CR_DBP, 0);
@@ -682,6 +724,9 @@ static int stm32_rtc_suspend(struct device *dev)
 {
 	struct stm32_rtc *rtc = dev_get_drvdata(dev);
 
+	if (rtc->data->has_pclk)
+		clk_disable_unprepare(rtc->pclk);
+
 	if (device_may_wakeup(dev))
 		return enable_irq_wake(rtc->irq_alarm);
 
@@ -693,6 +738,12 @@ static int stm32_rtc_resume(struct device *dev)
 	struct stm32_rtc *rtc = dev_get_drvdata(dev);
 	int ret = 0;
 
+	if (rtc->data->has_pclk) {
+		ret = clk_prepare_enable(rtc->pclk);
+		if (ret)
+			return ret;
+	}
+
 	ret = stm32_rtc_wait_sync(rtc);
 	if (ret < 0)
 		return ret;
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1674592 — [PATCH 1/2] dt-bindings: rtc: stm32: add support for STM32H7

This patch documents support for STM32H7 Real Time Clock.
It introduces a new compatible and rework clock definitions.
On STM32H7 we have a 'pclk' clock for register access, in addition to
the 'rtc_ck' clock.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
---
 .../devicetree/bindings/rtc/st,stm32-rtc.txt       | 32 ++++++++++++++++++----
 1 file changed, 27 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
index e2837b9..0a4c371 100644
--- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt
@@ -1,17 +1,25 @@
 STM32 Real Time Clock
 
 Required properties:
-- compatible: "st,stm32-rtc".
+- compatible: can be either "st,stm32-rtc" or "st,stm32h7-rtc", depending on
+  the device is compatible with stm32(f4/f7) or stm32h7.
 - reg: address range of rtc register set.
-- clocks: reference to the clock entry ck_rtc.
+- clocks: can use up to two clocks, depending on part used:
+  - "rtc_ck": RTC clock source.
+    It is required on stm32(f4/f7) and stm32h7.
+  - "pclk": RTC APB interface clock.
+    It is not present on stm32(f4/f7).
+    It is required on stm32h7.
+- clock-names: must be "rtc_ck" and "pclk".
+    It is required only on stm32h7.
 - interrupt-parent: phandle for the interrupt controller.
 - interrupts: rtc alarm interrupt.
 - st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
   (RTC registers) write protection.
 
-Optional properties (to override default ck_rtc parent clock):
-- assigned-clocks: reference to the ck_rtc clock entry.
-- assigned-clock-parents: phandle of the new parent clock of ck_rtc.
+Optional properties (to override default rtc_ck parent clock):
+- assigned-clocks: reference to the rtc_ck clock entry.
+- assigned-clock-parents: phandle of the new parent clock of rtc_ck.
 
 Example:
 
@@ -25,3 +33,17 @@ Example:
 		interrupts = <17 1>;
 		st,syscfg = <&pwrcfg>;
 	};
+
+	rtc: rtc@58004000 {
+		compatible = "st,stm32h7-rtc";
+		reg = <0x58004000 0x400>;
+		clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>;
+		clock-names = "pclk", "rtc_ck";
+		assigned-clocks = <&rcc RTC_CK>;
+		assigned-clock-parents = <&rcc LSE_CK>;
+		interrupt-parent = <&exti>;
+		interrupts = <17 1>;
+		interrupt-names = "alarm";
+		st,syscfg = <&pwrcfg>;
+		status = "disabled";
+	};
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1677032 — Re: [PATCH 1/2] dt-bindings: rtc: stm32: add support for STM32H7

On Mon, Jun 26, 2017 at 11:51:28AM +0200, Amelie Delaunay wrote:
> This patch documents support for STM32H7 Real Time Clock.
> It introduces a new compatible and rework clock definitions.
> On STM32H7 we have a 'pclk' clock for register access, in addition to
> the 'rtc_ck' clock.
> 
> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
> ---
>  .../devicetree/bindings/rtc/st,stm32-rtc.txt       | 32 ++++++++++++++++++----
>  1 file changed, 27 insertions(+), 5 deletions(-)

Acked-by: Rob Herring <robh@kernel.org>

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web