Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1673322 > unrolled thread

[PATCH NET v2 2/2] net: hns: Use phy_driver to setup Phy loopback

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH NET v2 2/2] net: hns: Use phy_driver to setup Phy loopback Lin Yun Sheng <linyunsheng@huawei.com> - 2017-06-23 09:30 +0200

#1673322 — [PATCH NET v2 2/2] net: hns: Use phy_driver to setup Phy loopback

Use function set_loopback in phy_driver to setup phy loopback
when doing ethtool self test.

Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 68 +++++-------------------
 1 file changed, 14 insertions(+), 54 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
index e95795b..1cd5161 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
@@ -259,67 +259,27 @@ static int hns_nic_set_link_ksettings(struct net_device *net_dev,
 
 static int hns_nic_config_phy_loopback(struct phy_device *phy_dev, u8 en)
 {
-#define COPPER_CONTROL_REG 0
-#define PHY_POWER_DOWN BIT(11)
-#define PHY_LOOP_BACK BIT(14)
-	u16 val = 0;
+	int err;
 
 	if (phy_dev->is_c45) /* c45 branch adding for XGE PHY */
 		return -ENOTSUPP;
 
 	if (en) {
-		/* speed : 1000M */
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 2);
-		phy_write(phy_dev, 21, 0x1046);
-
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
-		/* Force Master */
-		phy_write(phy_dev, 9, 0x1F00);
-
-		/* Soft-reset */
-		phy_write(phy_dev, 0, 0x9140);
-		/* If autoneg disabled,two soft-reset operations */
-		phy_write(phy_dev, 0, 0x9140);
-
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 0xFA);
-
-		/* Default is 0x0400 */
-		phy_write(phy_dev, 1, 0x418);
-
-		/* Force 1000M Link, Default is 0x0200 */
-		phy_write(phy_dev, 7, 0x20C);
-
-		/* Powerup Fiber */
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 1);
-		val = phy_read(phy_dev, COPPER_CONTROL_REG);
-		val &= ~PHY_POWER_DOWN;
-		phy_write(phy_dev, COPPER_CONTROL_REG, val);
-
-		/* Enable Phy Loopback */
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
-		val = phy_read(phy_dev, COPPER_CONTROL_REG);
-		val |= PHY_LOOP_BACK;
-		val &= ~PHY_POWER_DOWN;
-		phy_write(phy_dev, COPPER_CONTROL_REG, val);
+		err = phy_resume(phy_dev);
+		if (err)
+			goto out;
+
+		err = phy_loopback(phy_dev, true);
 	} else {
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 0xFA);
-		phy_write(phy_dev, 1, 0x400);
-		phy_write(phy_dev, 7, 0x200);
-
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 1);
-		val = phy_read(phy_dev, COPPER_CONTROL_REG);
-		val |= PHY_POWER_DOWN;
-		phy_write(phy_dev, COPPER_CONTROL_REG, val);
-
-		phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
-		phy_write(phy_dev, 9, 0xF00);
-
-		val = phy_read(phy_dev, COPPER_CONTROL_REG);
-		val &= ~PHY_LOOP_BACK;
-		val |= PHY_POWER_DOWN;
-		phy_write(phy_dev, COPPER_CONTROL_REG, val);
+		err = phy_loopback(phy_dev, false);
+		if (err)
+			goto out;
+
+		err = phy_suspend(phy_dev);
 	}
-	return 0;
+
+out:
+	return err;
 }
 
 static int __lb_setup(struct net_device *ndev,
-- 
1.9.1

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web