Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1671733 > unrolled thread

[PATCH v5.1 2/2] ARM: dts: meson6: use stable UART bindings

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v5.1 2/2] ARM: dts: meson6: use stable UART bindings Neil Armstrong <narmstrong@baylibre.com> - 2017-06-21 16:50 +0200

#1671733 — [PATCH v5.1 2/2] ARM: dts: meson6: use stable UART bindings

The UART bindings needs specifying a SoC family, use the meson6 family
for the UART nodes like the other nodes.
Switch to the stable UART bindings for meson6 by adding a XTAL node and
using the proper compatible strings.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm/boot/dts/meson.dtsi  |  8 ++++----
 arch/arm/boot/dts/meson6.dtsi | 28 ++++++++++++++++++++++++++++
 2 files changed, 32 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 15204e4..1ce9aa0 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -86,14 +86,14 @@
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -117,7 +117,7 @@
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -182,7 +182,7 @@
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
index 8557b61..ef281d2 100644
--- a/arch/arm/boot/dts/meson6.dtsi
+++ b/arch/arm/boot/dts/meson6.dtsi
@@ -70,9 +70,37 @@
 		};
 	};
 
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
 	clk81: clk@0 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <200000000>;
 	};
 }; /* end of / */
+
+
+&uart_AO {
+	clocks = <&xtal>, <&clk81>, <&clk81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+	clocks = <&xtal>, <&clk81>, <&clk81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	clocks = <&xtal>, <&clk81>, <&clk81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	clocks = <&xtal>, <&clk81>, <&clk81>;
+	clock-names = "xtal", "pclk", "baud";
+};
-- 
1.9.1

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web