Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1671433 > unrolled thread

Re: [RFC v2 07/12] powerpc: Macro the mask used for checking DSI exception

Started by"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
First post2017-06-21 09:30 +0200
Last post2017-06-21 11:20 +0200
Articles 2 — 2 participants

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [RFC v2 07/12] powerpc: Macro the mask used for checking DSI exception "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> - 2017-06-21 09:30 +0200
    Re: [RFC v2 07/12] powerpc: Macro the mask used for checking DSI  exception Ram Pai <linuxram@us.ibm.com> - 2017-06-21 11:20 +0200

#1671433 — Re: [RFC v2 07/12] powerpc: Macro the mask used for checking DSI exception

From"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date2017-06-21 09:30 +0200
SubjectRe: [RFC v2 07/12] powerpc: Macro the mask used for checking DSI exception
Message-ID<tUIfn-34h-1@gated-at.bofh.it>
Ram Pai <linuxram@us.ibm.com> writes:

> Replace the magic number used to check for DSI exception
> with a meaningful value.
>
> Signed-off-by: Ram Pai <linuxram@us.ibm.com>
> ---
>  arch/powerpc/include/asm/reg.h       | 9 ++++++++-
>  arch/powerpc/kernel/exceptions-64s.S | 2 +-
>  2 files changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
> index 7e50e47..2dcb8a1 100644
> --- a/arch/powerpc/include/asm/reg.h
> +++ b/arch/powerpc/include/asm/reg.h
> @@ -272,16 +272,23 @@
>  #define SPRN_DAR	0x013	/* Data Address Register */
>  #define SPRN_DBCR	0x136	/* e300 Data Breakpoint Control Reg */
>  #define SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
> +#define   DSISR_BIT32		0x80000000	/* not defined */
>  #define   DSISR_NOHPTE		0x40000000	/* no translation found */
> +#define   DSISR_PAGEATTR_CONFLT	0x20000000	/* page attribute conflict */
> +#define   DSISR_BIT35		0x10000000	/* not defined */
>  #define   DSISR_PROTFAULT	0x08000000	/* protection fault */
>  #define   DSISR_BADACCESS	0x04000000	/* bad access to CI or G */
>  #define   DSISR_ISSTORE		0x02000000	/* access was a store */
>  #define   DSISR_DABRMATCH	0x00400000	/* hit data breakpoint */
> -#define   DSISR_NOSEGMENT	0x00200000	/* SLB miss */
>  #define   DSISR_KEYFAULT	0x00200000	/* Key fault */
> +#define   DSISR_BIT43		0x00100000	/* not defined */
>  #define   DSISR_UNSUPP_MMU	0x00080000	/* Unsupported MMU config */
>  #define   DSISR_SET_RC		0x00040000	/* Failed setting of R/C bits */
>  #define   DSISR_PGDIRFAULT      0x00020000      /* Fault on page directory */
> +#define   DSISR_PAGE_FAULT_MASK (DSISR_BIT32 | \
> +				DSISR_PAGEATTR_CONFLT | \
> +				DSISR_BADACCESS |       \
> +				DSISR_BIT43)
>  #define SPRN_TBRL	0x10C	/* Time Base Read Lower Register (user, R/O) */
>  #define SPRN_TBRU	0x10D	/* Time Base Read Upper Register (user, R/O) */
>  #define SPRN_CIR	0x11B	/* Chip Information Register (hyper, R/0) */
> diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
> index ae418b8..3fd0528 100644
> --- a/arch/powerpc/kernel/exceptions-64s.S
> +++ b/arch/powerpc/kernel/exceptions-64s.S
> @@ -1411,7 +1411,7 @@ USE_TEXT_SECTION()
>  	.balign	IFETCH_ALIGN_BYTES
>  do_hash_page:
>  #ifdef CONFIG_PPC_STD_MMU_64
> -	andis.	r0,r4,0xa410		/* weird error? */
> +	andis.	r0,r4,DSISR_PAGE_FAULT_MASK@h
>  	bne-	handle_page_fault	/* if not, try to insert a HPTE */
>  	andis.  r0,r4,DSISR_DABRMATCH@h
>  	bne-    handle_dabr_fault


Thanks for doing this. I always wondered what that 0xa410 indicates. Now
tha it is documented, I am wondering are those the only DSISR values
that we want to check early ? You also added few bit positions that is
expected to carry value 0 ? But then excluded BIT35. Any reason ?

-aneesh

[toc] | [next] | [standalone]

#1671525 — Re: [RFC v2 07/12] powerpc: Macro the mask used for checking DSI exception

FromRam Pai <linuxram@us.ibm.com>
Date2017-06-21 11:20 +0200
SubjectRe: [RFC v2 07/12] powerpc: Macro the mask used for checking DSI exception
Message-ID<tUJXQ-4eI-9@gated-at.bofh.it>
In reply to#1671433
On Wed, Jun 21, 2017 at 12:55:42PM +0530, Aneesh Kumar K.V wrote:
> Ram Pai <linuxram@us.ibm.com> writes:
> 
> > Replace the magic number used to check for DSI exception
> > with a meaningful value.
> >
> > Signed-off-by: Ram Pai <linuxram@us.ibm.com>
> > ---
> >  arch/powerpc/include/asm/reg.h       | 9 ++++++++-
> >  arch/powerpc/kernel/exceptions-64s.S | 2 +-
> >  2 files changed, 9 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
> > index 7e50e47..2dcb8a1 100644
> > --- a/arch/powerpc/include/asm/reg.h
> > +++ b/arch/powerpc/include/asm/reg.h
> > @@ -272,16 +272,23 @@
> >  #define SPRN_DAR	0x013	/* Data Address Register */
> >  #define SPRN_DBCR	0x136	/* e300 Data Breakpoint Control Reg */
> >  #define SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
> > +#define   DSISR_BIT32		0x80000000	/* not defined */
> >  #define   DSISR_NOHPTE		0x40000000	/* no translation found */
> > +#define   DSISR_PAGEATTR_CONFLT	0x20000000	/* page attribute conflict */
> > +#define   DSISR_BIT35		0x10000000	/* not defined */
> >  #define   DSISR_PROTFAULT	0x08000000	/* protection fault */
> >  #define   DSISR_BADACCESS	0x04000000	/* bad access to CI or G */
> >  #define   DSISR_ISSTORE		0x02000000	/* access was a store */
> >  #define   DSISR_DABRMATCH	0x00400000	/* hit data breakpoint */
> > -#define   DSISR_NOSEGMENT	0x00200000	/* SLB miss */
> >  #define   DSISR_KEYFAULT	0x00200000	/* Key fault */
> > +#define   DSISR_BIT43		0x00100000	/* not defined */
> >  #define   DSISR_UNSUPP_MMU	0x00080000	/* Unsupported MMU config */
> >  #define   DSISR_SET_RC		0x00040000	/* Failed setting of R/C bits */
> >  #define   DSISR_PGDIRFAULT      0x00020000      /* Fault on page directory */
> > +#define   DSISR_PAGE_FAULT_MASK (DSISR_BIT32 | \
> > +				DSISR_PAGEATTR_CONFLT | \
> > +				DSISR_BADACCESS |       \
> > +				DSISR_BIT43)
> >  #define SPRN_TBRL	0x10C	/* Time Base Read Lower Register (user, R/O) */
> >  #define SPRN_TBRU	0x10D	/* Time Base Read Upper Register (user, R/O) */
> >  #define SPRN_CIR	0x11B	/* Chip Information Register (hyper, R/0) */
> > diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
> > index ae418b8..3fd0528 100644
> > --- a/arch/powerpc/kernel/exceptions-64s.S
> > +++ b/arch/powerpc/kernel/exceptions-64s.S
> > @@ -1411,7 +1411,7 @@ USE_TEXT_SECTION()
> >  	.balign	IFETCH_ALIGN_BYTES
> >  do_hash_page:
> >  #ifdef CONFIG_PPC_STD_MMU_64
> > -	andis.	r0,r4,0xa410		/* weird error? */
> > +	andis.	r0,r4,DSISR_PAGE_FAULT_MASK@h
> >  	bne-	handle_page_fault	/* if not, try to insert a HPTE */
> >  	andis.  r0,r4,DSISR_DABRMATCH@h
> >  	bne-    handle_dabr_fault
> 
> 
> Thanks for doing this. I always wondered what that 0xa410 indicates. Now
> tha it is documented, I am wondering are those the only DSISR values
> that we want to check early ? You also added few bit positions that is
> expected to carry value 0 ? But then excluded BIT35. Any reason ?

I did not look deeply into why the exact number 0xa410 was used in the
past.  I built the macro DSISR_PAGE_FAULT_MASK using whatever bits make
up 0xa410.  BIT35 if added to the DSISR_PAGE_FAULT_MASK would make it
0xb410. So I did not consider it.

However the macro for BIT35 is already defined in this patch, if that is what you were
looking for.
+#define   DSISR_BIT35              0x10000000      /* not defined */

RP

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web