Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1667758 > unrolled thread
| Started by | YT Shen <yt.shen@mediatek.com> |
|---|---|
| First post | 2017-06-16 15:50 +0200 |
| Last post | 2017-06-16 16:40 +0200 |
| Articles | 3 — 2 participants |
Back to article view | Back to linux.kernel
[PATCH v3 0/2] Add basic support for Mediatek MT2712 SoC YT Shen <yt.shen@mediatek.com> - 2017-06-16 15:50 +0200
[PATCH v3 2/2] arm64: dts: Add Mediatek SoC MT2712 and evaluation board dts and Makefile YT Shen <yt.shen@mediatek.com> - 2017-06-16 15:50 +0200
Re: [PATCH v3 2/2] arm64: dts: Add Mediatek SoC MT2712 and evaluation board dts and Makefile Matthias Brugger <matthias.bgg@gmail.com> - 2017-06-16 16:40 +0200
| From | YT Shen <yt.shen@mediatek.com> |
|---|---|
| Date | 2017-06-16 15:50 +0200 |
| Subject | [PATCH v3 0/2] Add basic support for Mediatek MT2712 SoC |
| Message-ID | <tSZNn-Hp-5@gated-at.bofh.it> |
MT2712 is a SoC based on 64bit ARMv8 architecture.
MT2712 share many HW IP with MT8173. This patchset was tested on MT2712
evaluation board, and boot to shell ok.
This series contains document bindings, device tree including interrupt
and uart.
Changes compared to v2:
- remove alias from serial1 to serial5
- remove initrd-start and initrd-end
- change GIC_CPU_MASK_SIMPLE(6) to GIC_CPU_MASK_RAW(0x13)
- change gic-400 reg range
Changes compared to v1:
- change subject prefix for bindings
- change device tree license to SPDX tag.
- change bootargs parameter to DT usage.
- change intpol-controller to interrupt-controller
YT Shen (2):
dt-bindings: arm: Add bindings for Mediatek MT2712 SoC Platform
arm64: dts: Add Mediatek SoC MT2712 and evaluation board dts and
Makefile
Documentation/devicetree/bindings/arm/mediatek.txt | 4 +
.../interrupt-controller/mediatek,sysirq.txt | 1 +
.../devicetree/bindings/serial/mtk-uart.txt | 1 +
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 32 ++++
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 166 +++++++++++++++++++++
6 files changed, 205 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt2712-evb.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt2712e.dtsi
--
1.9.1
[toc] | [next] | [standalone]
| From | YT Shen <yt.shen@mediatek.com> |
|---|---|
| Date | 2017-06-16 15:50 +0200 |
| Subject | [PATCH v3 2/2] arm64: dts: Add Mediatek SoC MT2712 and evaluation board dts and Makefile |
| Message-ID | <tSZNn-Hp-9@gated-at.bofh.it> |
| In reply to | #1667758 |
This adds basic chip support for Mediatek 2712
Signed-off-by: YT Shen <yt.shen@mediatek.com>
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 32 ++++++
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 166 ++++++++++++++++++++++++++++
3 files changed, 199 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt2712-evb.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt2712e.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 9fbfd32..fcc0604 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
new file mode 100644
index 0000000..8c804df
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: YT Shen <yt.shen@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include "mt2712e.dtsi"
+
+/ {
+ model = "MediaTek MT2712 evaluation board";
+ compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
new file mode 100644
index 0000000..65cdd4a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -0,0 +1,166 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: YT Shen <yt.shen@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "mediatek,mt2712";
+ interrupt-parent = <&sysirq>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu2>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ reg = <0x000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ reg = <0x001>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a72";
+ reg = <0x200>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ uart_clk: dummy26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ uart5: serial@1000f000 {
+ compatible = "mediatek,mt2712-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x1000f000 0 0x400>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ sysirq: interrupt-controller@10220a80 {
+ compatible = "mediatek,mt2712-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10220a80 0 0x40>;
+ };
+
+ gic: interrupt-controller@10510000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x10510000 0 0x10000>,
+ <0 0x10520000 0 0x20000>,
+ <0 0x10540000 0 0x20000>,
+ <0 0x10560000 0 0x20000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt2712-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x400>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt2712-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt2712-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x400>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart3: serial@11005000 {
+ compatible = "mediatek,mt2712-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11005000 0 0x400>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart4: serial@11019000 {
+ compatible = "mediatek,mt2712-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11019000 0 0x400>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+ };
+};
+
--
1.9.1
[toc] | [prev] | [next] | [standalone]
| From | Matthias Brugger <matthias.bgg@gmail.com> |
|---|---|
| Date | 2017-06-16 16:40 +0200 |
| Subject | Re: [PATCH v3 2/2] arm64: dts: Add Mediatek SoC MT2712 and evaluation board dts and Makefile |
| Message-ID | <tT0zL-1hl-1@gated-at.bofh.it> |
| In reply to | #1667759 |
On 16/06/17 15:45, YT Shen wrote:
> This adds basic chip support for Mediatek 2712
>
> Signed-off-by: YT Shen <yt.shen@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 32 ++++++
> arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 166 ++++++++++++++++++++++++++++
> 3 files changed, 199 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt2712e.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 9fbfd32..fcc0604 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -1,3 +1,4 @@
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> new file mode 100644
> index 0000000..8c804df
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
> @@ -0,0 +1,32 @@
> +/*
> + * Copyright (c) 2017 MediaTek Inc.
> + * Author: YT Shen <yt.shen@mediatek.com>
> + *
> + * SPDX-License-Identifier: (GPL-2.0 OR MIT)
> + */
> +
> +/dts-v1/;
> +#include "mt2712e.dtsi"
> +
> +/ {
> + model = "MediaTek MT2712 evaluation board";
> + compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0x80000000>;
> + };
> +
> + chosen {
> + stdout-path = "serial0:921600n8";
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> new file mode 100644
> index 0000000..65cdd4a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
> @@ -0,0 +1,166 @@
[...]
> +
> + uart_clk: dummy26m {
> + compatible = "fixed-clock";
> + clock-frequency = <26000000>;
> + #clock-cells = <0>;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13
> + (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14
> + (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11
> + (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10
> + (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> +
> + uart5: serial@1000f000 {
> + compatible = "mediatek,mt2712-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x1000f000 0 0x400>;
> + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&uart_clk>;
uart has two clocks, baud and bus clock. Please refer to the bindings
descrption for more information, that's what they are for.
Please define the two dummy clocks with the correct frequency and use them.
Regards,
Matthias
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web