Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1666954 > unrolled thread

[PATCH 4.4 00/46] 4.4.73-stable review

Back to article view | Back to linux.kernel

Contents

  [PATCH 4.4 00/46] 4.4.73-stable review Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:00 +0200
    [PATCH 4.4 21/46] ethtool: do not vzalloc(0) on registers dump Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:00 +0200
    [PATCH 4.4 27/46] drm/nouveau/fence/g84-: protect against concurrent access to semaphore buffers Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:00 +0200
    [PATCH 4.4 33/46] drm/nouveau: Dont enabling polling twice on runtime resume Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:00 +0200
    [PATCH 4.4 09/46] ipv6: Inhibit IPv4-mapped src address on the wire. Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:00 +0200
    [PATCH 4.4 32/46] parisc, parport_gsc: Fixes for printk continuation lines Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:00 +0200
    [PATCH 4.4 45/46] s390/kvm: do not rely on the ILC on kvm host protection fauls Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:00 +0200
    [PATCH 4.4 17/46] PM / runtime: Avoid false-positive warnings from might_sleep_if() Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:00 +0200
    [PATCH 4.4 37/46] r8152: re-schedule napi for tx Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:00 +0200
    [PATCH 4.4 22/46] fscache: Fix dead object requeue Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:00 +0200
    [PATCH 4.4 28/46] net/mlx4_core: Avoid command timeouts during VF driver device shutdown Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:00 +0200
    [PATCH 4.4 44/46] xtensa: dont use linux IRQ #0 Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:30 +0200
    [PATCH 4.4 41/46] romfs: use different way to generate fsid for BLOCK or MTD Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:30 +0200
    [PATCH 4.4 46/46] sparc64: make string buffers large enough Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:30 +0200
    [PATCH 4.4 38/46] r8152: fix rtl8152_post_reset function Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:30 +0200
    [PATCH 4.4 42/46] proc: add a schedule point in proc_pid_readdir() Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:30 +0200
    [PATCH 4.4 39/46] r8152: avoid start_xmit to schedule napi when napi is disabled Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:30 +0200
    [PATCH 4.4 31/46] net: adaptec: starfire: add checks for dma mapping errors Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 24/46] FS-Cache: Initialise stores_lock in netfs cookie Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 30/46] pinctrl: berlin-bg4ct: fix the value for "sd1a" of pin SCRD0_CRD_PRES Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 11/46] NET: mkiss: Fix panic Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 04/46] staging: rtl8192e: rtl92e_fill_tx_desc fix write to mapped out memory. Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 07/46] net: xilinx_emaclite: fix receive buffer overflow Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 08/46] ipv6: Handle IPv4-mapped src to in6addr_any dst. Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 18/46] jump label: pass kbuild_cflags when checking for asm goto support Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 29/46] gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 12/46] net: hns: Fix the device being used for dma mapping during TX Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 35/46] ravb: unmap descriptors when freeing rings Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 03/46] ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 23/46] fscache: Clear outstanding writes when disabling a cookie Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 15/46] i2c: piix4: Fix request_region size Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 10/46] NET: Fix /proc/net/arp for AX.25 Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 25/46] ipv6: fix flow labels when the traffic class is non-0 Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 36/46] nfs: Fix "Dont increment lock sequence ID after NFS4ERR_MOVED" Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 34/46] drm/ast: Fixed system hanged if disable P2A Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 26/46] drm/nouveau: prevent userspace from deleting client object Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 05/46] Call echo service immediately after socket reconnect Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 40/46] sctp: sctp_addr_id2transport should verify the addr before looking up assoc Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    [PATCH 4.4 20/46] log2: make order_base_2() behave correctly on const input value zero Greg Kroah-Hartman <gregkh@linuxfoundation.org> - 2017-06-15 20:40 +0200
    Re: [PATCH 4.4 00/46] 4.4.73-stable review Shuah Khan <shuahkh@osg.samsung.com> - 2017-06-16 00:30 +0200
    Re: [PATCH 4.4 00/46] 4.4.73-stable review Guenter Roeck <linux@roeck-us.net> - 2017-06-16 02:40 +0200

Page 2 of 3 — ← Prev page 1 [2] 3  Next page →

#1667103 — [PATCH 4.4 11/46] NET: mkiss: Fix panic

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ralf Baechle <ralf@linux-mips.org>


[ Upstream commit 7ba1b689038726d34e3244c1ac9e2e18c2ea4787 ]

If a USB-to-serial adapter is unplugged, the driver re-initializes, with
dev->hard_header_len and dev->addr_len set to zero, instead of the correct
values.  If then a packet is sent through the half-dead interface, the
kernel will panic due to running out of headroom in the skb when pushing
for the AX.25 headers resulting in this panic:

[<c0595468>] (skb_panic) from [<c0401f70>] (skb_push+0x4c/0x50)
[<c0401f70>] (skb_push) from [<bf0bdad4>] (ax25_hard_header+0x34/0xf4 [ax25])
[<bf0bdad4>] (ax25_hard_header [ax25]) from [<bf0d05d4>] (ax_header+0x38/0x40 [mkiss])
[<bf0d05d4>] (ax_header [mkiss]) from [<c041b584>] (neigh_compat_output+0x8c/0xd8)
[<c041b584>] (neigh_compat_output) from [<c043e7a8>] (ip_finish_output+0x2a0/0x914)
[<c043e7a8>] (ip_finish_output) from [<c043f948>] (ip_output+0xd8/0xf0)
[<c043f948>] (ip_output) from [<c043f04c>] (ip_local_out_sk+0x44/0x48)

This patch makes mkiss behave like the 6pack driver. 6pack does not
panic.  In 6pack.c sp_setup() (same function name here) the values for
dev->hard_header_len and dev->addr_len are set to the same values as in
my mkiss patch.

[ralf@linux-mips.org: Massages original submission to conform to the usual
standards for patch submissions.]

Signed-off-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hamradio/mkiss.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -648,8 +648,8 @@ static void ax_setup(struct net_device *
 {
 	/* Finish setting up the DEVICE info. */
 	dev->mtu             = AX_MTU;
-	dev->hard_header_len = 0;
-	dev->addr_len        = 0;
+	dev->hard_header_len = AX25_MAX_HEADER_LEN;
+	dev->addr_len        = AX25_ADDR_LEN;
 	dev->type            = ARPHRD_AX25;
 	dev->tx_queue_len    = 10;
 	dev->header_ops      = &ax25_header_ops;

[toc] | [prev] | [next] | [standalone]

#1667104 — [PATCH 4.4 04/46] staging: rtl8192e: rtl92e_fill_tx_desc fix write to mapped out memory.

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <tvboxspy@gmail.com>

commit baabd567f87be05330faa5140f72a91960e7405a upstream.

The driver attempts to alter memory that is mapped to PCI device.

This is because tx_fwinfo_8190pci points to skb->data

Move the pci_map_single to when completed buffer is ready to be mapped with
psdec is empty to drop on mapping error.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
@@ -1185,8 +1185,7 @@ void  rtl92e_fill_tx_desc(struct net_dev
 			  struct cb_desc *cb_desc, struct sk_buff *skb)
 {
 	struct r8192_priv *priv = rtllib_priv(dev);
-	dma_addr_t mapping = pci_map_single(priv->pdev, skb->data, skb->len,
-			 PCI_DMA_TODEVICE);
+	dma_addr_t mapping;
 	struct tx_fwinfo_8190pci *pTxFwInfo = NULL;
 
 	pTxFwInfo = (struct tx_fwinfo_8190pci *)skb->data;
@@ -1197,8 +1196,6 @@ void  rtl92e_fill_tx_desc(struct net_dev
 	pTxFwInfo->Short = _rtl92e_query_is_short(pTxFwInfo->TxHT,
 						  pTxFwInfo->TxRate, cb_desc);
 
-	if (pci_dma_mapping_error(priv->pdev, mapping))
-		netdev_err(dev, "%s(): DMA Mapping error\n", __func__);
 	if (cb_desc->bAMPDUEnable) {
 		pTxFwInfo->AllowAggregation = 1;
 		pTxFwInfo->RxMF = cb_desc->ampdu_factor;
@@ -1233,6 +1230,14 @@ void  rtl92e_fill_tx_desc(struct net_dev
 	}
 
 	memset((u8 *)pdesc, 0, 12);
+
+	mapping = pci_map_single(priv->pdev, skb->data, skb->len,
+				 PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(priv->pdev, mapping)) {
+		netdev_err(dev, "%s(): DMA Mapping error\n", __func__);
+		return;
+	}
+
 	pdesc->LINIP = 0;
 	pdesc->CmdInit = 1;
 	pdesc->Offset = sizeof(struct tx_fwinfo_8190pci) + 8;

[toc] | [prev] | [next] | [standalone]

#1667105 — [PATCH 4.4 07/46] net: xilinx_emaclite: fix receive buffer overflow

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anssi Hannula <anssi.hannula@bitwise.fi>


[ Upstream commit cd224553641848dd17800fe559e4ff5d208553e8 ]

xilinx_emaclite looks at the received data to try to determine the
Ethernet packet length but does not properly clamp it if
proto_type == ETH_P_IP or 1500 < proto_type <= 1518, causing a buffer
overflow and a panic via skb_panic() as the length exceeds the allocated
skb size.

Fix those cases.

Also add an additional unconditional check with WARN_ON() at the end.

Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -379,7 +379,7 @@ static int xemaclite_send_data(struct ne
  *
  * Return:	Total number of bytes received
  */
-static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
+static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data, int maxlen)
 {
 	void __iomem *addr;
 	u16 length, proto_type;
@@ -419,7 +419,7 @@ static u16 xemaclite_recv_data(struct ne
 
 	/* Check if received ethernet frame is a raw ethernet frame
 	 * or an IP packet or an ARP packet */
-	if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
+	if (proto_type > ETH_DATA_LEN) {
 
 		if (proto_type == ETH_P_IP) {
 			length = ((ntohl(xemaclite_readl(addr +
@@ -427,6 +427,7 @@ static u16 xemaclite_recv_data(struct ne
 					XEL_RXBUFF_OFFSET)) >>
 					XEL_HEADER_SHIFT) &
 					XEL_RPLR_LENGTH_MASK);
+			length = min_t(u16, length, ETH_DATA_LEN);
 			length += ETH_HLEN + ETH_FCS_LEN;
 
 		} else if (proto_type == ETH_P_ARP)
@@ -439,6 +440,9 @@ static u16 xemaclite_recv_data(struct ne
 		/* Use the length in the frame, plus the header and trailer */
 		length = proto_type + ETH_HLEN + ETH_FCS_LEN;
 
+	if (WARN_ON(length > maxlen))
+		length = maxlen;
+
 	/* Read from the EmacLite device */
 	xemaclite_aligned_read((u32 __force *) (addr + XEL_RXBUFF_OFFSET),
 				data, length);
@@ -613,7 +617,7 @@ static void xemaclite_rx_handler(struct
 
 	skb_reserve(skb, 2);
 
-	len = xemaclite_recv_data(lp, (u8 *) skb->data);
+	len = xemaclite_recv_data(lp, (u8 *) skb->data, len);
 
 	if (!len) {
 		dev->stats.rx_errors++;

[toc] | [prev] | [next] | [standalone]

#1667106 — [PATCH 4.4 08/46] ipv6: Handle IPv4-mapped src to in6addr_any dst.

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Jonathan T. Leighton" <jtleight@udel.edu>


[ Upstream commit 052d2369d1b479cdbbe020fdd6d057d3c342db74 ]

This patch adds a check on the type of the source address for the case
where the destination address is in6addr_any. If the source is an
IPv4-mapped IPv6 source address, the destination is changed to
::ffff:127.0.0.1, and otherwise the destination is changed to ::1. This
is done in three locations to handle UDP calls to either connect() or
sendmsg() and TCP calls to connect(). Note that udpv6_sendmsg() delays
handling an in6addr_any destination until very late, so the patch only
needs to handle the case where the source is an IPv4-mapped IPv6
address.

Signed-off-by: Jonathan T. Leighton <jtleight@udel.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/datagram.c |   14 +++++++++-----
 net/ipv6/tcp_ipv6.c |   11 ++++++++---
 net/ipv6/udp.c      |    4 ++++
 3 files changed, 21 insertions(+), 8 deletions(-)

--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -76,18 +76,22 @@ static int __ip6_datagram_connect(struct
 		}
 	}
 
-	addr_type = ipv6_addr_type(&usin->sin6_addr);
-
-	if (addr_type == IPV6_ADDR_ANY) {
+	if (ipv6_addr_any(&usin->sin6_addr)) {
 		/*
 		 *	connect to self
 		 */
-		usin->sin6_addr.s6_addr[15] = 0x01;
+		if (ipv6_addr_v4mapped(&sk->sk_v6_rcv_saddr))
+			ipv6_addr_set_v4mapped(htonl(INADDR_LOOPBACK),
+					       &usin->sin6_addr);
+		else
+			usin->sin6_addr = in6addr_loopback;
 	}
 
+	addr_type = ipv6_addr_type(&usin->sin6_addr);
+
 	daddr = &usin->sin6_addr;
 
-	if (addr_type == IPV6_ADDR_MAPPED) {
+	if (addr_type & IPV6_ADDR_MAPPED) {
 		struct sockaddr_in sin;
 
 		if (__ipv6_only_sock(sk)) {
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -149,8 +149,13 @@ static int tcp_v6_connect(struct sock *s
 	 *	connect() to INADDR_ANY means loopback (BSD'ism).
 	 */
 
-	if (ipv6_addr_any(&usin->sin6_addr))
-		usin->sin6_addr.s6_addr[15] = 0x1;
+	if (ipv6_addr_any(&usin->sin6_addr)) {
+		if (ipv6_addr_v4mapped(&sk->sk_v6_rcv_saddr))
+			ipv6_addr_set_v4mapped(htonl(INADDR_LOOPBACK),
+					       &usin->sin6_addr);
+		else
+			usin->sin6_addr = in6addr_loopback;
+	}
 
 	addr_type = ipv6_addr_type(&usin->sin6_addr);
 
@@ -189,7 +194,7 @@ static int tcp_v6_connect(struct sock *s
 	 *	TCP over IPv4
 	 */
 
-	if (addr_type == IPV6_ADDR_MAPPED) {
+	if (addr_type & IPV6_ADDR_MAPPED) {
 		u32 exthdrlen = icsk->icsk_ext_hdr_len;
 		struct sockaddr_in sin;
 
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1136,6 +1136,10 @@ int udpv6_sendmsg(struct sock *sk, struc
 			if (addr_len < SIN6_LEN_RFC2133)
 				return -EINVAL;
 			daddr = &sin6->sin6_addr;
+			if (ipv6_addr_any(daddr) &&
+			    ipv6_addr_v4mapped(&np->saddr))
+				ipv6_addr_set_v4mapped(htonl(INADDR_LOOPBACK),
+						       daddr);
 			break;
 		case AF_INET:
 			goto do_udp_sendmsg;

[toc] | [prev] | [next] | [standalone]

#1667107 — [PATCH 4.4 18/46] jump label: pass kbuild_cflags when checking for asm goto support

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Lin <dtwlin@google.com>


[ Upstream commit 35f860f9ba6aac56cc38e8b18916d833a83f1157 ]

Some versions of ARM GCC compiler such as Android toolchain throws in a
'-fpic' flag by default.  This causes the gcc-goto check script to fail
although some config would have '-fno-pic' flag in the KBUILD_CFLAGS.

This patch passes the KBUILD_CFLAGS to the check script so that the
script does not rely on the default config from different compilers.

Link: http://lkml.kernel.org/r/20170120234329.78868-1-dtwlin@google.com
Signed-off-by: David Lin <dtwlin@google.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Makefile
+++ b/Makefile
@@ -789,7 +789,7 @@ KBUILD_CFLAGS   += $(call cc-option,-Wer
 KBUILD_ARFLAGS := $(call ar-option,D)
 
 # check for 'asm goto'
-ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y)
 	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
 	KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
 endif

[toc] | [prev] | [next] | [standalone]

#1667108 — [PATCH 4.4 29/46] gianfar: synchronize DMA API usage by free_skb_rx_queue w/ gfar_new_page

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arseny Solokha <asolokha@kb.kras.ru>


[ Upstream commit 4af0e5bb95ee3ba5ea4bd7dbb94e1648a5279cc9 ]

In spite of switching to paged allocation of Rx buffers, the driver still
called dma_unmap_single() in the Rx queues tear-down path.

The DMA region unmapping code in free_skb_rx_queue() basically predates
the introduction of paged allocation to the driver. While being refactored,
it apparently hasn't reflected the change in the DMA API usage by its
counterpart gfar_new_page().

As a result, setting an interface to the DOWN state now yields the following:

  # ip link set eth2 down
  fsl-gianfar ffe24000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001ecd0000] [size=40]
  ------------[ cut here ]------------
  WARNING: CPU: 1 PID: 189 at lib/dma-debug.c:1123 check_unmap+0x8e0/0xa28
  CPU: 1 PID: 189 Comm: ip Tainted: G           O    4.9.5 #1
  task: dee73400 task.stack: dede2000
  NIP: c02101e8 LR: c02101e8 CTR: c0260d74
  REGS: dede3bb0 TRAP: 0700   Tainted: G           O     (4.9.5)
  MSR: 00021000 <CE,ME>  CR: 28002222  XER: 00000000

  GPR00: c02101e8 dede3c60 dee73400 000000b6 dfbd033c dfbd36c4 1f622000 dede2000
  GPR08: 00000007 c05b1634 1f622000 00000000 22002484 100a9904 00000000 00000000
  GPR16: 00000000 db4c849c 00000002 db4c8480 00000001 df142240 db4c84bc 00000000
  GPR24: c0706148 c0700000 00029000 c07552e8 c07323b4 dede3cb8 c07605e0 db535540
  NIP [c02101e8] check_unmap+0x8e0/0xa28
  LR [c02101e8] check_unmap+0x8e0/0xa28
  Call Trace:
  [dede3c60] [c02101e8] check_unmap+0x8e0/0xa28 (unreliable)
  [dede3cb0] [c02103b8] debug_dma_unmap_page+0x88/0x9c
  [dede3d30] [c02dffbc] free_skb_resources+0x2c4/0x404
  [dede3d80] [c02e39b4] gfar_close+0x24/0xc8
  [dede3da0] [c0361550] __dev_close_many+0xa0/0xf8
  [dede3dd0] [c03616f0] __dev_close+0x2c/0x4c
  [dede3df0] [c036b1b8] __dev_change_flags+0xa0/0x174
  [dede3e10] [c036b2ac] dev_change_flags+0x20/0x60
  [dede3e30] [c03e130c] devinet_ioctl+0x540/0x824
  [dede3e90] [c0347dcc] sock_ioctl+0x134/0x298
  [dede3eb0] [c0111814] do_vfs_ioctl+0xac/0x854
  [dede3f20] [c0111ffc] SyS_ioctl+0x40/0x74
  [dede3f40] [c000f290] ret_from_syscall+0x0/0x3c
  --- interrupt: c01 at 0xff45da0
      LR = 0xff45cd0
  Instruction dump:
  811d001c 7c66482e 813d0020 9061000c 807f000c 5463103a 7cc6182e 3c60c052
  386309ac 90c10008 4cc63182 4826b845 <0fe00000> 4bfffa60 3c80c052 388402c4
  ---[ end trace 695ae6d7ac1d0c47 ]---
  Mapped at:
   [<c02e22a8>] gfar_alloc_rx_buffs+0x178/0x248
   [<c02e3ef0>] startup_gfar+0x368/0x570
   [<c036aeb4>] __dev_open+0xdc/0x150
   [<c036b1b8>] __dev_change_flags+0xa0/0x174
   [<c036b2ac>] dev_change_flags+0x20/0x60

Even though the issue was discovered in 4.9 kernel, the code in question
is identical in the current net and net-next trees.

Fixes: 75354148ce69 ("gianfar: Add paged allocation and Rx S/G")
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/gianfar.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1999,8 +1999,8 @@ static void free_skb_rx_queue(struct gfa
 		if (!rxb->page)
 			continue;
 
-		dma_unmap_single(rx_queue->dev, rxb->dma,
-				 PAGE_SIZE, DMA_FROM_DEVICE);
+		dma_unmap_page(rx_queue->dev, rxb->dma,
+			       PAGE_SIZE, DMA_FROM_DEVICE);
 		__free_page(rxb->page);
 
 		rxb->page = NULL;

[toc] | [prev] | [next] | [standalone]

#1667109 — [PATCH 4.4 12/46] net: hns: Fix the device being used for dma mapping during TX

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kejian Yan <yankejian@huawei.com>


[ Upstream commit b85ea006b6bebb692628f11882af41c3e12e1e09 ]

This patch fixes the device being used to DMA map skb->data.
Erroneous device assignment causes the crash when SMMU is enabled.
This happens during TX since buffer gets DMA mapped with device
correspondign to net_device and gets unmapped using the device
related to DSAF.

Signed-off-by: Kejian Yan <yankejian@huawei.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_enet.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -105,8 +105,8 @@ int hns_nic_net_xmit_hw(struct net_devic
 			struct hns_nic_ring_data *ring_data)
 {
 	struct hns_nic_priv *priv = netdev_priv(ndev);
-	struct device *dev = priv->dev;
 	struct hnae_ring *ring = ring_data->ring;
+	struct device *dev = ring_to_dev(ring);
 	struct netdev_queue *dev_queue;
 	struct skb_frag_struct *frag;
 	int buf_num;

[toc] | [prev] | [next] | [standalone]

#1667111 — [PATCH 4.4 35/46] ravb: unmap descriptors when freeing rings

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>


[ Upstream commit a47b70ea86bdeb3091341f5ae3ef580f1a1ad822 ]

"swiotlb buffer is full" errors occur after repeated initialisation of a
device - f.e. suspend/resume or ip link set up/down. This is because memory
mapped using dma_map_single() in ravb_ring_format() and ravb_start_xmit()
is not released.  Resolve this problem by unmapping descriptors when
freeing rings.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
[simon: reworked]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/renesas/ravb_main.c |  112 +++++++++++++++++--------------
 1 file changed, 64 insertions(+), 48 deletions(-)

--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -171,6 +171,49 @@ static struct mdiobb_ops bb_ops = {
 	.get_mdio_data = ravb_get_mdio_data,
 };
 
+/* Free TX skb function for AVB-IP */
+static int ravb_tx_free(struct net_device *ndev, int q, bool free_txed_only)
+{
+	struct ravb_private *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &priv->stats[q];
+	struct ravb_tx_desc *desc;
+	int free_num = 0;
+	int entry;
+	u32 size;
+
+	for (; priv->cur_tx[q] - priv->dirty_tx[q] > 0; priv->dirty_tx[q]++) {
+		bool txed;
+
+		entry = priv->dirty_tx[q] % (priv->num_tx_ring[q] *
+					     NUM_TX_DESC);
+		desc = &priv->tx_ring[q][entry];
+		txed = desc->die_dt == DT_FEMPTY;
+		if (free_txed_only && !txed)
+			break;
+		/* Descriptor type must be checked before all other reads */
+		dma_rmb();
+		size = le16_to_cpu(desc->ds_tagl) & TX_DS;
+		/* Free the original skb. */
+		if (priv->tx_skb[q][entry / NUM_TX_DESC]) {
+			dma_unmap_single(ndev->dev.parent, le32_to_cpu(desc->dptr),
+					 size, DMA_TO_DEVICE);
+			/* Last packet descriptor? */
+			if (entry % NUM_TX_DESC == NUM_TX_DESC - 1) {
+				entry /= NUM_TX_DESC;
+				dev_kfree_skb_any(priv->tx_skb[q][entry]);
+				priv->tx_skb[q][entry] = NULL;
+				if (txed)
+					stats->tx_packets++;
+			}
+			free_num++;
+		}
+		if (txed)
+			stats->tx_bytes += size;
+		desc->die_dt = DT_EEMPTY;
+	}
+	return free_num;
+}
+
 /* Free skb's and DMA buffers for Ethernet AVB */
 static void ravb_ring_free(struct net_device *ndev, int q)
 {
@@ -186,19 +229,21 @@ static void ravb_ring_free(struct net_de
 	kfree(priv->rx_skb[q]);
 	priv->rx_skb[q] = NULL;
 
-	/* Free TX skb ringbuffer */
-	if (priv->tx_skb[q]) {
-		for (i = 0; i < priv->num_tx_ring[q]; i++)
-			dev_kfree_skb(priv->tx_skb[q][i]);
-	}
-	kfree(priv->tx_skb[q]);
-	priv->tx_skb[q] = NULL;
-
 	/* Free aligned TX buffers */
 	kfree(priv->tx_align[q]);
 	priv->tx_align[q] = NULL;
 
 	if (priv->rx_ring[q]) {
+		for (i = 0; i < priv->num_rx_ring[q]; i++) {
+			struct ravb_ex_rx_desc *desc = &priv->rx_ring[q][i];
+
+			if (!dma_mapping_error(ndev->dev.parent,
+					       le32_to_cpu(desc->dptr)))
+				dma_unmap_single(ndev->dev.parent,
+						 le32_to_cpu(desc->dptr),
+						 PKT_BUF_SZ,
+						 DMA_FROM_DEVICE);
+		}
 		ring_size = sizeof(struct ravb_ex_rx_desc) *
 			    (priv->num_rx_ring[q] + 1);
 		dma_free_coherent(ndev->dev.parent, ring_size, priv->rx_ring[q],
@@ -207,12 +252,20 @@ static void ravb_ring_free(struct net_de
 	}
 
 	if (priv->tx_ring[q]) {
+		ravb_tx_free(ndev, q, false);
+
 		ring_size = sizeof(struct ravb_tx_desc) *
 			    (priv->num_tx_ring[q] * NUM_TX_DESC + 1);
 		dma_free_coherent(ndev->dev.parent, ring_size, priv->tx_ring[q],
 				  priv->tx_desc_dma[q]);
 		priv->tx_ring[q] = NULL;
 	}
+
+	/* Free TX skb ringbuffer.
+	 * SKBs are freed by ravb_tx_free() call above.
+	 */
+	kfree(priv->tx_skb[q]);
+	priv->tx_skb[q] = NULL;
 }
 
 /* Format skb and descriptor buffer for Ethernet AVB */
@@ -420,44 +473,6 @@ static int ravb_dmac_init(struct net_dev
 	return 0;
 }
 
-/* Free TX skb function for AVB-IP */
-static int ravb_tx_free(struct net_device *ndev, int q)
-{
-	struct ravb_private *priv = netdev_priv(ndev);
-	struct net_device_stats *stats = &priv->stats[q];
-	struct ravb_tx_desc *desc;
-	int free_num = 0;
-	int entry;
-	u32 size;
-
-	for (; priv->cur_tx[q] - priv->dirty_tx[q] > 0; priv->dirty_tx[q]++) {
-		entry = priv->dirty_tx[q] % (priv->num_tx_ring[q] *
-					     NUM_TX_DESC);
-		desc = &priv->tx_ring[q][entry];
-		if (desc->die_dt != DT_FEMPTY)
-			break;
-		/* Descriptor type must be checked before all other reads */
-		dma_rmb();
-		size = le16_to_cpu(desc->ds_tagl) & TX_DS;
-		/* Free the original skb. */
-		if (priv->tx_skb[q][entry / NUM_TX_DESC]) {
-			dma_unmap_single(ndev->dev.parent, le32_to_cpu(desc->dptr),
-					 size, DMA_TO_DEVICE);
-			/* Last packet descriptor? */
-			if (entry % NUM_TX_DESC == NUM_TX_DESC - 1) {
-				entry /= NUM_TX_DESC;
-				dev_kfree_skb_any(priv->tx_skb[q][entry]);
-				priv->tx_skb[q][entry] = NULL;
-				stats->tx_packets++;
-			}
-			free_num++;
-		}
-		stats->tx_bytes += size;
-		desc->die_dt = DT_EEMPTY;
-	}
-	return free_num;
-}
-
 static void ravb_get_tx_tstamp(struct net_device *ndev)
 {
 	struct ravb_private *priv = netdev_priv(ndev);
@@ -797,7 +812,7 @@ static int ravb_poll(struct napi_struct
 			spin_lock_irqsave(&priv->lock, flags);
 			/* Clear TX interrupt */
 			ravb_write(ndev, ~mask, TIS);
-			ravb_tx_free(ndev, q);
+			ravb_tx_free(ndev, q, true);
 			netif_wake_subqueue(ndev, q);
 			mmiowb();
 			spin_unlock_irqrestore(&priv->lock, flags);
@@ -1393,7 +1408,8 @@ static netdev_tx_t ravb_start_xmit(struc
 
 	priv->cur_tx[q] += NUM_TX_DESC;
 	if (priv->cur_tx[q] - priv->dirty_tx[q] >
-	    (priv->num_tx_ring[q] - 1) * NUM_TX_DESC && !ravb_tx_free(ndev, q))
+	    (priv->num_tx_ring[q] - 1) * NUM_TX_DESC &&
+	    !ravb_tx_free(ndev, q, true))
 		netif_stop_subqueue(ndev, q);
 
 exit:

[toc] | [prev] | [next] | [standalone]

#1667112 — [PATCH 4.4 03/46] ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Estevam <fabio.estevam@nxp.com>

commit 46350b71a09ccf3573649e03db55d4b61d5da231 upstream.

Table 8 from MX6DL datasheet (IMX6SDLCEC Rev. 5, 06/2015):
http://cache.nxp.com/files/32bit/doc/data_sheet/IMX6SDLCEC.pdf

states the following:

"LDO Output Set Point (VDD_ARM_CAP) = 1.125 V minimum for operation
up to 396 MHz."

So fix the entry by adding the 25mV margin value as done in the other
entries of the table, which results in 1.15V for 396MHz operation.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cc: Stephane Fillod <f8cfe@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/imx6dl.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -30,7 +30,7 @@
 				/* kHz    uV */
 				996000  1250000
 				792000  1175000
-				396000  1075000
+				396000  1150000
 			>;
 			fsl,soc-operating-points = <
 				/* ARM kHz  SOC-PU uV */

[toc] | [prev] | [next] | [standalone]

#1667113 — [PATCH 4.4 23/46] fscache: Clear outstanding writes when disabling a cookie

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Howells <dhowells@redhat.com>


[ Upstream commit 6bdded59c8933940ac7e5b416448276ac89d1144 ]

fscache_disable_cookie() needs to clear the outstanding writes on the
cookie it's disabling because they cannot be completed after.

Without this, fscache_nfs_open_file() gets stuck because it disables the
cookie when the file is opened for writing but can't uncache the pages till
afterwards - otherwise there's a race between the open routine and anyone
who already has it open R/O and is still reading from it.

Looking in /proc/pid/stack of the offending process shows:

[<ffffffffa0142883>] __fscache_wait_on_page_write+0x82/0x9b [fscache]
[<ffffffffa014336e>] __fscache_uncache_all_inode_pages+0x91/0xe1 [fscache]
[<ffffffffa01740fa>] nfs_fscache_open_file+0x59/0x9e [nfs]
[<ffffffffa01ccf41>] nfs4_file_open+0x17f/0x1b8 [nfsv4]
[<ffffffff8117350e>] do_dentry_open+0x16d/0x2b7
[<ffffffff811743ac>] vfs_open+0x5c/0x65
[<ffffffff81184185>] path_openat+0x785/0x8fb
[<ffffffff81184343>] do_filp_open+0x48/0x9e
[<ffffffff81174710>] do_sys_open+0x13b/0x1cb
[<ffffffff811747b9>] SyS_open+0x19/0x1b
[<ffffffff81001c44>] do_syscall_64+0x80/0x17a
[<ffffffff8165c2da>] return_from_SYSCALL_64+0x0/0x7a
[<ffffffffffffffff>] 0xffffffffffffffff

Reported-by: Jianhong Yin <jiyin@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/fscache/cookie.c |    5 +++++
 fs/fscache/object.c |    6 ++++++
 2 files changed, 11 insertions(+)

--- a/fs/fscache/cookie.c
+++ b/fs/fscache/cookie.c
@@ -542,6 +542,7 @@ void __fscache_disable_cookie(struct fsc
 		hlist_for_each_entry(object, &cookie->backing_objects, cookie_link) {
 			if (invalidate)
 				set_bit(FSCACHE_OBJECT_RETIRED, &object->flags);
+			clear_bit(FSCACHE_OBJECT_PENDING_WRITE, &object->flags);
 			fscache_raise_event(object, FSCACHE_OBJECT_EV_KILL);
 		}
 	} else {
@@ -560,6 +561,10 @@ void __fscache_disable_cookie(struct fsc
 		wait_on_atomic_t(&cookie->n_active, fscache_wait_atomic_t,
 				 TASK_UNINTERRUPTIBLE);
 
+	/* Make sure any pending writes are cancelled. */
+	if (cookie->def->type != FSCACHE_COOKIE_TYPE_INDEX)
+		fscache_invalidate_writes(cookie);
+
 	/* Reset the cookie state if it wasn't relinquished */
 	if (!test_bit(FSCACHE_COOKIE_RELINQUISHED, &cookie->flags)) {
 		atomic_inc(&cookie->n_active);
--- a/fs/fscache/object.c
+++ b/fs/fscache/object.c
@@ -650,6 +650,12 @@ static const struct fscache_state *fscac
 	fscache_mark_object_dead(object);
 	object->oob_event_mask = 0;
 
+	if (test_bit(FSCACHE_OBJECT_RETIRED, &object->flags)) {
+		/* Reject any new read/write ops and abort any that are pending. */
+		clear_bit(FSCACHE_OBJECT_PENDING_WRITE, &object->flags);
+		fscache_cancel_all_ops(object);
+	}
+
 	if (list_empty(&object->dependents) &&
 	    object->n_ops == 0 &&
 	    object->n_children == 0)

[toc] | [prev] | [next] | [standalone]

#1667114 — [PATCH 4.4 15/46] i2c: piix4: Fix request_region size

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ricardo Ribalda <ricardo.ribalda@gmail.com>


[ Upstream commit f43128c75202f29ee71aa83e6c320a911137c189 ]

Since '701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC")' we
are using the SMBSLVCNT register at offset 0x8. We need to request it.

Fixes: 701dc207bf55 ("i2c: piix4: Avoid race conditions with IMC")
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-piix4.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -54,7 +54,7 @@
 #define SMBSLVDAT	(0xC + piix4_smba)
 
 /* count for request_region */
-#define SMBIOSIZE	8
+#define SMBIOSIZE	9
 
 /* PCI Address Constants */
 #define SMBBA		0x090

[toc] | [prev] | [next] | [standalone]

#1667115 — [PATCH 4.4 10/46] NET: Fix /proc/net/arp for AX.25

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ralf Baechle <ralf@linux-mips.org>


[ Upstream commit 4872e57c812dd312bf8193b5933fa60585cda42f ]

When sending ARP requests over AX.25 links the hwaddress in the neighbour
cache are not getting initialized.  For such an incomplete arp entry
ax2asc2 will generate an empty string resulting in /proc/net/arp output
like the following:

$ cat /proc/net/arp
IP address       HW type     Flags       HW address            Mask     Device
192.168.122.1    0x1         0x2         52:54:00:00:5d:5f     *        ens3
172.20.1.99      0x3         0x0              *        bpq0

The missing field will confuse the procfs parsing of arp(8) resulting in
incorrect output for the device such as the following:

$ arp
Address                  HWtype  HWaddress           Flags Mask            Iface
gateway                  ether   52:54:00:00:5d:5f   C                     ens3
172.20.1.99                      (incomplete)                              ens3

This changes the content of /proc/net/arp to:

$ cat /proc/net/arp
IP address       HW type     Flags       HW address            Mask     Device
172.20.1.99      0x3         0x0         *                     *        bpq0
192.168.122.1    0x1         0x2         52:54:00:00:5d:5f     *        ens3

To do so it change ax2asc to put the string "*" in buf for a NULL address
argument.  Finally the HW address field is left aligned in a 17 character
field (the length of an ethernet HW address in the usual hex notation) for
readability.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/arp.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -1250,7 +1250,7 @@ void __init arp_init(void)
 /*
  *	ax25 -> ASCII conversion
  */
-static char *ax2asc2(ax25_address *a, char *buf)
+static void ax2asc2(ax25_address *a, char *buf)
 {
 	char c, *s;
 	int n;
@@ -1272,10 +1272,10 @@ static char *ax2asc2(ax25_address *a, ch
 	*s++ = n + '0';
 	*s++ = '\0';
 
-	if (*buf == '\0' || *buf == '-')
-		return "*";
-
-	return buf;
+	if (*buf == '\0' || *buf == '-') {
+		buf[0] = '*';
+		buf[1] = '\0';
+	}
 }
 #endif /* CONFIG_AX25 */
 
@@ -1309,7 +1309,7 @@ static void arp_format_neigh_entry(struc
 	}
 #endif
 	sprintf(tbuf, "%pI4", n->primary_key);
-	seq_printf(seq, "%-16s 0x%-10x0x%-10x%s     *        %s\n",
+	seq_printf(seq, "%-16s 0x%-10x0x%-10x%-17s     *        %s\n",
 		   tbuf, hatype, arp_state_to_flags(n), hbuffer, dev->name);
 	read_unlock(&n->lock);
 }

[toc] | [prev] | [next] | [standalone]

#1667116 — [PATCH 4.4 25/46] ipv6: fix flow labels when the traffic class is non-0

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dimitris Michailidis <dmichail@google.com>


[ Upstream commit 90427ef5d2a4b9a24079889bf16afdcdaebc4240 ]

ip6_make_flowlabel() determines the flow label for IPv6 packets. It's
supposed to be passed a flow label, which it returns as is if non-0 and
in some other cases, otherwise it calculates a new value.

The problem is callers often pass a flowi6.flowlabel, which may also
contain traffic class bits. If the traffic class is non-0
ip6_make_flowlabel() mistakes the non-0 it gets as a flow label and
returns the whole thing. Thus it can return a 'flow label' longer than
20b and the low 20b of that is typically 0 resulting in packets with 0
label. Moreover, different packets of a flow may be labeled differently.
For a TCP flow with ECN non-payload and payload packets get different
labels as exemplified by this pair of consecutive packets:

(pure ACK)
Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
    0110 .... = Version: 6
    .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT)
        .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
        .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0)
    .... .... .... 0001 1100 1110 0100 1001 = Flow Label: 0x1ce49
    Payload Length: 32
    Next Header: TCP (6)

(payload)
Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
    0110 .... = Version: 6
    .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0))
        .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
        .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2)
    .... .... .... 0000 0000 0000 0000 0000 = Flow Label: 0x00000
    Payload Length: 688
    Next Header: TCP (6)

This patch allows ip6_make_flowlabel() to be passed more than just a
flow label and has it extract the part it really wants. This was simpler
than modifying the callers. With this patch packets like the above become

Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
    0110 .... = Version: 6
    .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT)
        .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
        .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0)
    .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e
    Payload Length: 32
    Next Header: TCP (6)

Internet Protocol Version 6, Src: 2002:af5:11a3::, Dst: 2002:af5:11a2::
    0110 .... = Version: 6
    .... 0000 0010 .... .... .... .... .... = Traffic Class: 0x02 (DSCP: CS0, ECN: ECT(0))
        .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0)
        .... .... ..10 .... .... .... .... .... = Explicit Congestion Notification: ECN-Capable Transport codepoint '10' (2)
    .... .... .... 1010 1111 1010 0101 1110 = Flow Label: 0xafa5e
    Payload Length: 688
    Next Header: TCP (6)

Signed-off-by: Dimitris Michailidis <dmichail@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ipv6.h |    5 +++++
 1 file changed, 5 insertions(+)

--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -744,6 +744,11 @@ static inline __be32 ip6_make_flowlabel(
 {
 	u32 hash;
 
+	/* @flowlabel may include more than a flow label, eg, the traffic class.
+	 * Here we want only the flow label value.
+	 */
+	flowlabel &= IPV6_FLOWLABEL_MASK;
+
 	if (flowlabel ||
 	    net->ipv6.sysctl.auto_flowlabels == IP6_AUTO_FLOW_LABEL_OFF ||
 	    (!autolabel &&

[toc] | [prev] | [next] | [standalone]

#1667117 — [PATCH 4.4 36/46] nfs: Fix "Dont increment lock sequence ID after NFS4ERR_MOVED"

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>


[ Upstream commit 406dab8450ec76eca88a1af2fc15d18a2b36ca49 ]

Lock sequence IDs are bumped in decode_lock by calling
nfs_increment_seqid(). nfs_increment_sequid() does not use the
seqid_mutating_err() function fixed in commit 059aa7348241 ("Don't
increment lock sequence ID after NFS4ERR_MOVED").

Fixes: 059aa7348241 ("Don't increment lock sequence ID after ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Xuan Qi <xuan.qi@oracle.com>
Cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/nfs4state.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -1072,6 +1072,7 @@ static void nfs_increment_seqid(int stat
 		case -NFS4ERR_BADXDR:
 		case -NFS4ERR_RESOURCE:
 		case -NFS4ERR_NOFILEHANDLE:
+		case -NFS4ERR_MOVED:
 			/* Non-seqid mutating errors */
 			return;
 	};

[toc] | [prev] | [next] | [standalone]

#1667119 — [PATCH 4.4 34/46] drm/ast: Fixed system hanged if disable P2A

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Y.C. Chen" <yc_chen@aspeedtech.com>


[ Upstream commit 6c971c09f38704513c426ba6515f22fb3d6c87d5 ]

The original ast driver will access some BMC configuration through P2A bridge
that can be disabled since AST2300 and after.
It will cause system hanged if P2A bridge is disabled.
Here is the update to fix it.

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/ast/ast_drv.h  |    1 
 drivers/gpu/drm/ast/ast_main.c |  157 +++++++++++++++++++++--------------------
 drivers/gpu/drm/ast/ast_post.c |   18 +++-
 3 files changed, 97 insertions(+), 79 deletions(-)

--- a/drivers/gpu/drm/ast/ast_drv.h
+++ b/drivers/gpu/drm/ast/ast_drv.h
@@ -113,6 +113,7 @@ struct ast_private {
 	struct ttm_bo_kmap_obj cache_kmap;
 	int next_cursor;
 	bool support_wide_screen;
+	bool DisableP2A;
 
 	enum ast_tx_chip tx_chip_type;
 	u8 dp501_maxclk;
--- a/drivers/gpu/drm/ast/ast_main.c
+++ b/drivers/gpu/drm/ast/ast_main.c
@@ -124,6 +124,12 @@ static int ast_detect_chip(struct drm_de
 	} else
 		*need_post = false;
 
+	/* Check P2A Access */
+	ast->DisableP2A = true;
+	data = ast_read32(ast, 0xf004);
+	if (data != 0xFFFFFFFF)
+		ast->DisableP2A = false;
+
 	/* Check if we support wide screen */
 	switch (ast->chip) {
 	case AST1180:
@@ -140,15 +146,17 @@ static int ast_detect_chip(struct drm_de
 			ast->support_wide_screen = true;
 		else {
 			ast->support_wide_screen = false;
-			/* Read SCU7c (silicon revision register) */
-			ast_write32(ast, 0xf004, 0x1e6e0000);
-			ast_write32(ast, 0xf000, 0x1);
-			data = ast_read32(ast, 0x1207c);
-			data &= 0x300;
-			if (ast->chip == AST2300 && data == 0x0) /* ast1300 */
-				ast->support_wide_screen = true;
-			if (ast->chip == AST2400 && data == 0x100) /* ast1400 */
-				ast->support_wide_screen = true;
+			if (ast->DisableP2A == false) {
+				/* Read SCU7c (silicon revision register) */
+				ast_write32(ast, 0xf004, 0x1e6e0000);
+				ast_write32(ast, 0xf000, 0x1);
+				data = ast_read32(ast, 0x1207c);
+				data &= 0x300;
+				if (ast->chip == AST2300 && data == 0x0) /* ast1300 */
+					ast->support_wide_screen = true;
+				if (ast->chip == AST2400 && data == 0x100) /* ast1400 */
+					ast->support_wide_screen = true;
+			}
 		}
 		break;
 	}
@@ -216,80 +224,81 @@ static int ast_get_dram_info(struct drm_
 	uint32_t data, data2;
 	uint32_t denum, num, div, ref_pll;
 
-	ast_write32(ast, 0xf004, 0x1e6e0000);
-	ast_write32(ast, 0xf000, 0x1);
-
-
-	ast_write32(ast, 0x10000, 0xfc600309);
-
-	do {
-		if (pci_channel_offline(dev->pdev))
-			return -EIO;
-	} while (ast_read32(ast, 0x10000) != 0x01);
-	data = ast_read32(ast, 0x10004);
-
-	if (data & 0x40)
+	if (ast->DisableP2A)
+	{
 		ast->dram_bus_width = 16;
+		ast->dram_type = AST_DRAM_1Gx16;
+		ast->mclk = 396;
+	}
 	else
-		ast->dram_bus_width = 32;
+	{
+		ast_write32(ast, 0xf004, 0x1e6e0000);
+		ast_write32(ast, 0xf000, 0x1);
+		data = ast_read32(ast, 0x10004);
+
+		if (data & 0x40)
+			ast->dram_bus_width = 16;
+		else
+			ast->dram_bus_width = 32;
+
+		if (ast->chip == AST2300 || ast->chip == AST2400) {
+			switch (data & 0x03) {
+			case 0:
+				ast->dram_type = AST_DRAM_512Mx16;
+				break;
+			default:
+			case 1:
+				ast->dram_type = AST_DRAM_1Gx16;
+				break;
+			case 2:
+				ast->dram_type = AST_DRAM_2Gx16;
+				break;
+			case 3:
+				ast->dram_type = AST_DRAM_4Gx16;
+				break;
+			}
+		} else {
+			switch (data & 0x0c) {
+			case 0:
+			case 4:
+				ast->dram_type = AST_DRAM_512Mx16;
+				break;
+			case 8:
+				if (data & 0x40)
+					ast->dram_type = AST_DRAM_1Gx16;
+				else
+					ast->dram_type = AST_DRAM_512Mx32;
+				break;
+			case 0xc:
+				ast->dram_type = AST_DRAM_1Gx32;
+				break;
+			}
+		}
 
-	if (ast->chip == AST2300 || ast->chip == AST2400) {
-		switch (data & 0x03) {
-		case 0:
-			ast->dram_type = AST_DRAM_512Mx16;
-			break;
-		default:
-		case 1:
-			ast->dram_type = AST_DRAM_1Gx16;
-			break;
-		case 2:
-			ast->dram_type = AST_DRAM_2Gx16;
-			break;
+		data = ast_read32(ast, 0x10120);
+		data2 = ast_read32(ast, 0x10170);
+		if (data2 & 0x2000)
+			ref_pll = 14318;
+		else
+			ref_pll = 12000;
+
+		denum = data & 0x1f;
+		num = (data & 0x3fe0) >> 5;
+		data = (data & 0xc000) >> 14;
+		switch (data) {
 		case 3:
-			ast->dram_type = AST_DRAM_4Gx16;
-			break;
-		}
-	} else {
-		switch (data & 0x0c) {
-		case 0:
-		case 4:
-			ast->dram_type = AST_DRAM_512Mx16;
+			div = 0x4;
 			break;
-		case 8:
-			if (data & 0x40)
-				ast->dram_type = AST_DRAM_1Gx16;
-			else
-				ast->dram_type = AST_DRAM_512Mx32;
+		case 2:
+		case 1:
+			div = 0x2;
 			break;
-		case 0xc:
-			ast->dram_type = AST_DRAM_1Gx32;
+		default:
+			div = 0x1;
 			break;
 		}
+		ast->mclk = ref_pll * (num + 2) / (denum + 2) * (div * 1000);
 	}
-
-	data = ast_read32(ast, 0x10120);
-	data2 = ast_read32(ast, 0x10170);
-	if (data2 & 0x2000)
-		ref_pll = 14318;
-	else
-		ref_pll = 12000;
-
-	denum = data & 0x1f;
-	num = (data & 0x3fe0) >> 5;
-	data = (data & 0xc000) >> 14;
-	switch (data) {
-	case 3:
-		div = 0x4;
-		break;
-	case 2:
-	case 1:
-		div = 0x2;
-		break;
-	default:
-		div = 0x1;
-		break;
-	}
-	ast->mclk = ref_pll * (num + 2) / (denum + 2) * (div * 1000);
 	return 0;
 }
 
--- a/drivers/gpu/drm/ast/ast_post.c
+++ b/drivers/gpu/drm/ast/ast_post.c
@@ -375,12 +375,20 @@ void ast_post_gpu(struct drm_device *dev
 	ast_enable_mmio(dev);
 	ast_set_def_ext_reg(dev);
 
-	if (ast->chip == AST2300 || ast->chip == AST2400)
-		ast_init_dram_2300(dev);
-	else
-		ast_init_dram_reg(dev);
+	if (ast->DisableP2A == false)
+	{
+		if (ast->chip == AST2300 || ast->chip == AST2400)
+			ast_init_dram_2300(dev);
+		else
+			ast_init_dram_reg(dev);
 
-	ast_init_3rdtx(dev);
+		ast_init_3rdtx(dev);
+	}
+	else
+	{
+		if (ast->tx_chip_type != AST_TX_NONE)
+			ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xcf, 0x80);	/* Enable DVO */
+	}
 }
 
 /* AST 2300 DRAM settings */

[toc] | [prev] | [next] | [standalone]

#1667125 — [PATCH 4.4 26/46] drm/nouveau: prevent userspace from deleting client object

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Skeggs <bskeggs@redhat.com>


[ Upstream commit c966b6279f610a24ac1d42dcbe30e10fa61220b2 ]

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/nouveau/nouveau_usif.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/nouveau_usif.c
+++ b/drivers/gpu/drm/nouveau/nouveau_usif.c
@@ -313,7 +313,8 @@ usif_ioctl(struct drm_file *filp, void _
 	if (nvif_unpack(argv->v0, 0, 0, true)) {
 		/* block access to objects not created via this interface */
 		owner = argv->v0.owner;
-		if (argv->v0.object == 0ULL)
+		if (argv->v0.object == 0ULL &&
+		    argv->v0.type != NVIF_IOCTL_V0_DEL)
 			argv->v0.owner = NVDRM_OBJECT_ANY; /* except client */
 		else
 			argv->v0.owner = NVDRM_OBJECT_USIF;

[toc] | [prev] | [next] | [standalone]

#1667126 — [PATCH 4.4 05/46] Call echo service immediately after socket reconnect

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sachin Prabhu <sprabhu@redhat.com>

commit b8c600120fc87d53642476f48c8055b38d6e14c7 upstream.

Commit 4fcd1813e640 ("Fix reconnect to not defer smb3 session reconnect
long after socket reconnect") changes the behaviour of the SMB2 echo
service and causes it to renegotiate after a socket reconnect. However
under default settings, the echo service could take up to 120 seconds to
be scheduled.

The patch forces the echo service to be called immediately resulting a
negotiate call being made immediately on reconnect.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/connect.c |   24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -412,6 +412,9 @@ cifs_reconnect(struct TCP_Server_Info *s
 		}
 	} while (server->tcpStatus == CifsNeedReconnect);
 
+	if (server->tcpStatus == CifsNeedNegotiate)
+		mod_delayed_work(cifsiod_wq, &server->echo, 0);
+
 	return rc;
 }
 
@@ -421,18 +424,27 @@ cifs_echo_request(struct work_struct *wo
 	int rc;
 	struct TCP_Server_Info *server = container_of(work,
 					struct TCP_Server_Info, echo.work);
+	unsigned long echo_interval;
+
+	/*
+	 * If we need to renegotiate, set echo interval to zero to
+	 * immediately call echo service where we can renegotiate.
+	 */
+	if (server->tcpStatus == CifsNeedNegotiate)
+		echo_interval = 0;
+	else
+		echo_interval = SMB_ECHO_INTERVAL;
 
 	/*
-	 * We cannot send an echo if it is disabled or until the
-	 * NEGOTIATE_PROTOCOL request is done, which is indicated by
-	 * server->ops->need_neg() == true. Also, no need to ping if
-	 * we got a response recently.
+	 * We cannot send an echo if it is disabled.
+	 * Also, no need to ping if we got a response recently.
 	 */
 
 	if (server->tcpStatus == CifsNeedReconnect ||
-	    server->tcpStatus == CifsExiting || server->tcpStatus == CifsNew ||
+	    server->tcpStatus == CifsExiting ||
+	    server->tcpStatus == CifsNew ||
 	    (server->ops->can_echo && !server->ops->can_echo(server)) ||
-	    time_before(jiffies, server->lstrp + SMB_ECHO_INTERVAL - HZ))
+	    time_before(jiffies, server->lstrp + echo_interval - HZ))
 		goto requeue_echo;
 
 	rc = server->ops->echo ? server->ops->echo(server) : -ENOSYS;

[toc] | [prev] | [next] | [standalone]

#1667128 — [PATCH 4.4 40/46] sctp: sctp_addr_id2transport should verify the addr before looking up assoc

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xin Long <lucien.xin@gmail.com>


[ Upstream commit 6f29a130613191d3c6335169febe002cba00edf5 ]

sctp_addr_id2transport is a function for sockopt to look up assoc by
address. As the address is from userspace, it can be a v4-mapped v6
address. But in sctp protocol stack, it always handles a v4-mapped
v6 address as a v4 address. So it's necessary to convert it to a v4
address before looking up assoc by address.

This patch is to fix it by calling sctp_verify_addr in which it can do
this conversion before calling sctp_endpoint_lookup_assoc, just like
what sctp_sendmsg and __sctp_connect do for the address from users.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/socket.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -235,8 +235,12 @@ static struct sctp_transport *sctp_addr_
 					      sctp_assoc_t id)
 {
 	struct sctp_association *addr_asoc = NULL, *id_asoc = NULL;
-	struct sctp_transport *transport;
+	struct sctp_af *af = sctp_get_af_specific(addr->ss_family);
 	union sctp_addr *laddr = (union sctp_addr *)addr;
+	struct sctp_transport *transport;
+
+	if (sctp_verify_addr(sk, laddr, af->sockaddr_len))
+		return NULL;
 
 	addr_asoc = sctp_endpoint_lookup_assoc(sctp_sk(sk)->ep,
 					       laddr,

[toc] | [prev] | [next] | [standalone]

#1667129 — [PATCH 4.4 20/46] log2: make order_base_2() behave correctly on const input value zero

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

commit 29905b52fad0854351f57bab867647e4982285bf upstream.

The function order_base_2() is defined (according to the comment block)
as returning zero on input zero, but subsequently passes the input into
roundup_pow_of_two(), which is explicitly undefined for input zero.

This has gone unnoticed until now, but optimization passes in GCC 7 may
produce constant folded function instances where a constant value of
zero is passed into order_base_2(), resulting in link errors against the
deliberately undefined '____ilog2_NaN'.

So update order_base_2() to adhere to its own documented interface.

[ See

     http://marc.info/?l=linux-kernel&m=147672952517795&w=2

  and follow-up discussion for more background. The gcc "optimization
  pass" is really just broken, but now the GCC trunk problem seems to
  have escaped out of just specially built daily images, so we need to
  work around it in mainline.    - Linus ]

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/log2.h |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/include/linux/log2.h
+++ b/include/linux/log2.h
@@ -194,6 +194,17 @@ unsigned long __rounddown_pow_of_two(uns
  *  ... and so on.
  */
 
-#define order_base_2(n) ilog2(roundup_pow_of_two(n))
+static inline __attribute_const__
+int __order_base_2(unsigned long n)
+{
+	return n > 1 ? ilog2(n - 1) + 1 : 0;
+}
 
+#define order_base_2(n)				\
+(						\
+	__builtin_constant_p(n) ? (		\
+		((n) == 0 || (n) == 1) ? 0 :	\
+		ilog2((n) - 1) + 1) :		\
+	__order_base_2(n)			\
+)
 #endif /* _LINUX_LOG2_H */

[toc] | [prev] | [next] | [standalone]

#1667310

On 06/15/2017 11:52 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.73 release.
> There are 46 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat Jun 17 17:51:59 UTC 2017.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.73-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

[toc] | [prev] | [next] | [standalone]

Page 2 of 3 — ← Prev page 1 [2] 3  Next page →

Back to top | Article view | linux.kernel

csiph-web