Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1663293 > unrolled thread

[PATCH v3] mmc: dw_mmc-k3: add sd support for hi3660

Started byliwei <liwei213@huawei.com>
First post2017-06-12 09:50 +0200
Last post2017-06-13 08:00 +0200
Articles 3 — 3 participants

Back to article view | Back to linux.kernel

Contents

  [PATCH v3] mmc: dw_mmc-k3: add sd support for hi3660 liwei <liwei213@huawei.com> - 2017-06-12 09:50 +0200
    Re: [PATCH v3] mmc: dw_mmc-k3: add sd support for hi3660 Jaehoon Chung <jh80.chung@samsung.com> - 2017-06-13 00:30 +0200
    答复: [PATCH v3] mmc: dw_mmc-k3: add sd support for hi3660 "liwei (CM)" <liwei213@huawei.com> - 2017-06-13 08:00 +0200

#1663293 — [PATCH v3] mmc: dw_mmc-k3: add sd support for hi3660

Fromliwei <liwei213@huawei.com>
Date2017-06-12 09:50 +0200
Subject[PATCH v3] mmc: dw_mmc-k3: add sd support for hi3660
Message-ID<tRsgN-7H6-5@gated-at.bofh.it>
Add sd card support for hi3660 soc

Major changes in v3:
 - solve review comments from Heiner Kallweit.
   *use the GENMASK and FIELD_PREP macros replace the bit shift operation.
   *use usleep_range() replace udelay() and mdelay().

Signed-off-by: Li Wei <liwei213@huawei.com>
Signed-off-by: Chen Jun <chenjun14@huawei.com>
---
 drivers/mmc/host/dw_mmc-k3.c | 314 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 314 insertions(+)

diff --git a/drivers/mmc/host/dw_mmc-k3.c b/drivers/mmc/host/dw_mmc-k3.c
index e38fb0020bb1..a6e13bd83b9f 100644
--- a/drivers/mmc/host/dw_mmc-k3.c
+++ b/drivers/mmc/host/dw_mmc-k3.c
@@ -8,6 +8,8 @@
  * (at your option) any later version.
  */
 
+#include <linux/bitops.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mmc/host.h>
@@ -28,7 +30,40 @@
 #define AO_SCTRL_SEL18		BIT(10)
 #define AO_SCTRL_CTRL3		0x40C
 
+#define DWMMC_SD_ID   1
+#define DWMMC_SDIO_ID 2
+
+#define SOC_SCTRL_SCPERCTRL5    (0x314)
+#define SDCARD_IO_SEL18         BIT(2)
+
+#define GENCLK_DIV (7)
+
+#define GPIO_CLK_ENABLE                   BIT(16)
+#define GPIO_CLK_DIV_MASK                 GENMASK(11, 8)
+#define GPIO_USE_SAMPLE_DLY_MASK          GENMASK(13, 13)
+#define UHS_REG_EXT_SAMPLE_PHASE_MASK     GENMASK(20, 16)
+#define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK  GENMASK(25, 21)
+#define UHS_REG_EXT_SAMPLE_DLY_MASK       GENMASK(30, 26)
+
+#define SDMMC_UHS_REG_EXT	0x108
+#define SDMMC_ENABLE_SHIFT	0x110
+
+#define TIMING_MODE     3
+#define TIMING_CFG_NUM 10
+
+#define PULL_DOWN BIT(1)
+#define PULL_UP   BIT(0)
+
+#define NUM_PHASES (40)
+
+#define ENABLE_SHIFT_MIN_SMPL (4)
+#define ENABLE_SHIFT_MAX_SMPL (12)
+#define USE_DLY_MIN_SMPL (11)
+#define USE_DLY_MAX_SMPL (14)
+
 struct k3_priv {
+	u8 ctrl_id;
+	u32 cur_speed;
 	struct regmap	*reg;
 };
 
@@ -38,6 +73,41 @@ static unsigned long dw_mci_hi6220_caps[] = {
 	0
 };
 
+struct hs_timing {
+	int drv_phase;
+	int sam_dly;
+	int sam_phase_max;
+	int sam_phase_min;
+};
+
+struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = {
+	{ /* reserved */ },
+	{ /* SD */
+		{7, 0, 15, 15,},  /* 0: LEGACY 400k */
+		{6, 0,  4,  4,},  /* 1: MMC_HS */
+		{6, 0,  3,  3,},  /* 2: SD_HS */
+		{6, 0, 15, 15,},  /* 3: SDR12 */
+		{6, 0,  2,  2,},  /* 4: SDR25 */
+		{4, 0, 11,  0,},  /* 5: SDR50 */
+		{6, 4, 15,  0,},  /* 6: SDR104 */
+		{0},              /* 7: DDR50 */
+		{0},              /* 8: DDR52 */
+		{0},              /* 9: HS200 */
+	},
+	{ /* SDIO */
+		{7, 0, 15, 15,},  /* 0: LEGACY 400k */
+		{0},              /* 1: MMC_HS */
+		{6, 0, 15, 15,},  /* 2: SD_HS */
+		{6, 0, 15, 15,},  /* 3: SDR12 */
+		{6, 0,  0,  0,},  /* 4: SDR25 */
+		{4, 0, 12,  0,},  /* 5: SDR50 */
+		{5, 4, 15,  0,},  /* 6: SDR104 */
+		{0},              /* 7: DDR50 */
+		{0},              /* 8: DDR52 */
+		{0},              /* 9: HS200 */
+	}
+};
+
 static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
 {
 	int ret;
@@ -66,6 +136,10 @@ static int dw_mci_hi6220_parse_dt(struct dw_mci *host)
 	if (IS_ERR(priv->reg))
 		priv->reg = NULL;
 
+	priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
+	if (priv->ctrl_id < 0)
+		priv->ctrl_id = 0;
+
 	host->priv = priv;
 	return 0;
 }
@@ -144,7 +218,242 @@ static const struct dw_mci_drv_data hi6220_data = {
 	.execute_tuning		= dw_mci_hi6220_execute_tuning,
 };
 
+static void dw_mci_hs_set_timing(struct dw_mci *host, int timing, int sam_phase)
+{
+	int drv_phase;
+	int sam_dly;
+	int ctrl_id;
+	int use_sam_dly = 0;
+	int enable_shift = 0;
+	int reg_value;
+	struct k3_priv *priv;
+
+	priv = host->priv;
+	ctrl_id = priv->ctrl_id;
+
+	drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase;
+	sam_dly   = hs_timing_cfg[ctrl_id][timing].sam_dly;
+	if (sam_phase == -1)
+		sam_phase = (hs_timing_cfg[ctrl_id][timing].sam_phase_max +
+			     hs_timing_cfg[ctrl_id][timing].sam_phase_min) / 2;
+
+	if (timing == MMC_TIMING_UHS_SDR50 ||
+	    timing == MMC_TIMING_UHS_SDR104) {
+		if (sam_phase >= ENABLE_SHIFT_MIN_SMPL &&
+		    sam_phase <= ENABLE_SHIFT_MAX_SMPL)
+			enable_shift = 1;
+	}
+	if (timing == MMC_TIMING_UHS_SDR104) {
+		if (sam_phase >= USE_DLY_MIN_SMPL &&
+		    sam_phase <= USE_DLY_MAX_SMPL)
+			use_sam_dly = 1;
+	}
+
+	mci_writel(host, GPIO, 0x0);
+	usleep_range(5, 10);
+
+	reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, sam_phase) |\
+				FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK ,sam_dly) |\
+				FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK,drv_phase);		
+	mci_writel(host, UHS_REG_EXT, reg_value);
+
+	mci_writel(host, ENABLE_SHIFT, enable_shift);
+
+	reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) |\
+				FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK,use_sam_dly);
+	mci_writel(host, GPIO, (unsigned int)reg_value | GPIO_CLK_ENABLE);
+
+	/* We should delay 1ms wait for timing setting finished. */
+	usleep_range(1000, 2000);
+}
+
+int dw_mci_hi3660_init(struct dw_mci *host)
+{
+	/* set threshold to 512 bytes */
+	mci_writel(host, CDTHRCTL, 0x02000001);
+
+	dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1);
+	host->bus_hz /= (GENCLK_DIV + 1);
+
+	return 0;
+}
+
+static int dw_mci_set_sel18(struct dw_mci *host, bool set)
+{
+	int ret;
+	unsigned int val;
+	struct k3_priv *priv;
+
+	priv = host->priv;
+
+	val = set ? SDCARD_IO_SEL18 : 0;
+	ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5,
+				 SDCARD_IO_SEL18, val);
+	if (ret) {
+		dev_err(host->dev, "sel18 %u error\n", val);
+		return ret;
+	}
+
+	return 0;
+}
+
+void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+	int ret;
+	unsigned long wanted;
+	unsigned long actual;
+	struct k3_priv *priv = host->priv;
+
+	if (!ios->clock || ios->clock == priv->cur_speed)
+		return;
+
+	wanted = ios->clock * (GENCLK_DIV + 1);
+	ret = clk_set_rate(host->ciu_clk, wanted);
+	if (ret) {
+		dev_err(host->dev, "failed to set rate %luHz\n", wanted);
+		return;
+	}
+	actual = clk_get_rate(host->ciu_clk);
+
+	dw_mci_hs_set_timing(host, ios->timing, -1);
+	host->bus_hz = actual / (GENCLK_DIV + 1);
+	host->current_speed = 0;
+	priv->cur_speed = host->bus_hz;
+}
+
+static int dw_mci_get_best_clksmpl(unsigned int sample_flag)
+{
+	int i;
+	int interval;
+	unsigned int v;
+	unsigned int len;
+	unsigned int range_start = 0;
+	unsigned int range_length = 0;
+	unsigned int middle_range = 0;
+
+	if (!sample_flag)
+		return -EIO;
+
+	if (~sample_flag == 0)
+		return 0;
+
+	i = ffs(sample_flag) - 1;
+
+	/*A clock cycle is divided into 32 phases, 
+	*each of which is represented by a bit, finding the optimal phase.
+	*/
+	while (i < 32) {
+		v = ror32(sample_flag, i);
+		len = ffs(~v) - 1;
+
+		if (len > range_length) {
+			range_length = len;
+			range_start = i;
+		}
+
+		interval = ffs(v >> len) - 1;
+		if (interval < 0)
+			break;
+
+		i += len + interval;
+	}
+
+	middle_range = range_start + range_length / 2;
+	if (middle_range >= 32)
+		middle_range %= 32;
+
+	return middle_range;
+}
+
+static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
+{
+	int i = 0;
+	struct dw_mci *host = slot->host;
+	struct mmc_host *mmc = slot->mmc;
+	int sam_phase = 0;
+	u32 tuning_sample_flag = 0;
+	int best_clksmpl = 0;
+
+	for (i = 0; i < NUM_PHASES; ++i, ++sam_phase) {
+		sam_phase %= 32;
+
+		mci_writel(host, TMOUT, ~0);
+		dw_mci_hs_set_timing(host, mmc->ios.timing, sam_phase);
+
+		if (!mmc_send_tuning(mmc, opcode, NULL))
+			tuning_sample_flag |= (1 << sam_phase);
+		else
+			tuning_sample_flag &= ~(1 << sam_phase);
+	}
+
+	best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag);
+	if (best_clksmpl < 0) {
+		dev_err(host->dev, "All phases bad!\n");
+		return -EIO;
+	}
+
+	dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl);
+
+	dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n",
+		 best_clksmpl, tuning_sample_flag);
+	return 0;
+}
+
+static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc,
+					struct mmc_ios *ios)
+{
+	int ret;
+	int min_uv = 0;
+	int max_uv = 0;
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct k3_priv *priv;
+	struct dw_mci *host;
+
+	host = slot->host;
+	priv = host->priv;
+
+	if (!priv || !priv->reg)
+		return 0;
+
+	if (priv->ctrl_id == DWMMC_SDIO_ID)
+		return 0;
+
+	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
+		ret = dw_mci_set_sel18(host, 0);
+		if (ret)
+			return ret;
+		min_uv = 2950000;
+		max_uv = 2950000;
+	} else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
+		ret = dw_mci_set_sel18(host, 1);
+		if (ret)
+			return ret;
+		min_uv = 1800000;
+		max_uv = 1800000;
+	}
+
+	if (IS_ERR_OR_NULL(mmc->supply.vqmmc))
+		return 0;
+
+	ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
+	if (ret) {
+		dev_dbg(host->dev, "Regulator set error %d: %d - %d\n",
+			ret, min_uv, max_uv);
+		return ret;
+	}
+	return 0;
+}
+
+static const struct dw_mci_drv_data hi3660_data = {
+	.init = dw_mci_hi3660_init,
+	.set_ios = dw_mci_hi3660_set_ios,
+	.parse_dt = dw_mci_hi6220_parse_dt,
+	.execute_tuning = dw_mci_hi3660_execute_tuning,
+	.switch_voltage  = dw_mci_hi3660_switch_voltage,
+};
+
 static const struct of_device_id dw_mci_k3_match[] = {
+	{ .compatible = "hisilicon,hi3660-dw-mshc", .data = &hi3660_data, },
 	{ .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
 	{ .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, },
 	{},
@@ -155,6 +464,11 @@ static int dw_mci_k3_probe(struct platform_device *pdev)
 {
 	const struct dw_mci_drv_data *drv_data;
 	const struct of_device_id *match;
+	struct reset_control	*rst;
+
+	rst = devm_reset_control_get(&pdev->dev, NULL);
+	if (!IS_ERR(rst))
+		reset_control_reset(rst);
 
 	match = of_match_node(dw_mci_k3_match, pdev->dev.of_node);
 	drv_data = match->data;
-- 
2.11.0

[toc] | [next] | [standalone]

#1664277

FromJaehoon Chung <jh80.chung@samsung.com>
Date2017-06-13 00:30 +0200
Message-ID<tRG0p-86G-13@gated-at.bofh.it>
In reply to#1663293
Hi,

On 06/12/2017 11:27 PM, Jaehoon Chung wrote:
> Hi Li,
> 
> On 2017년 06월 12일 16:46, liwei wrote:
>> Add sd card support for hi3660 soc
>>
>> Major changes in v3:
>>  - solve review comments from Heiner Kallweit.
>>    *use the GENMASK and FIELD_PREP macros replace the bit shift operation.
>>    *use usleep_range() replace udelay() and mdelay().
> 
> I had added the some comments about your previous patch.
> Refer to below...
> 
> https://patchwork.kernel.org/patch/9747495/

Before sending patch, run checkpatch...I will not apply this patch.

Best Regards,
Jaehoon Chung

> 
>>
>> Signed-off-by: Li Wei <liwei213@huawei.com>
>> Signed-off-by: Chen Jun <chenjun14@huawei.com>
>> ---
> 
> Locate changelog at here.
> 
> Best Regards,
> Jaehoon Chung
> 
>>  drivers/mmc/host/dw_mmc-k3.c | 314 +++++++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 314 insertions(+)
>>
>> diff --git a/drivers/mmc/host/dw_mmc-k3.c b/drivers/mmc/host/dw_mmc-k3.c
>> index e38fb0020bb1..a6e13bd83b9f 100644
>> --- a/drivers/mmc/host/dw_mmc-k3.c
>> +++ b/drivers/mmc/host/dw_mmc-k3.c
>> @@ -8,6 +8,8 @@
>>   * (at your option) any later version.
>>   */
>>  
>> +#include <linux/bitops.h>
>> +#include <linux/bitfield.h>
>>  #include <linux/clk.h>
>>  #include <linux/mfd/syscon.h>
>>  #include <linux/mmc/host.h>
>> @@ -28,7 +30,40 @@
>>  #define AO_SCTRL_SEL18		BIT(10)
>>  #define AO_SCTRL_CTRL3		0x40C
>>  
>> +#define DWMMC_SD_ID   1
>> +#define DWMMC_SDIO_ID 2
>> +
>> +#define SOC_SCTRL_SCPERCTRL5    (0x314)
>> +#define SDCARD_IO_SEL18         BIT(2)
>> +
>> +#define GENCLK_DIV (7)
>> +
>> +#define GPIO_CLK_ENABLE                   BIT(16)
>> +#define GPIO_CLK_DIV_MASK                 GENMASK(11, 8)
>> +#define GPIO_USE_SAMPLE_DLY_MASK          GENMASK(13, 13)
>> +#define UHS_REG_EXT_SAMPLE_PHASE_MASK     GENMASK(20, 16)
>> +#define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK  GENMASK(25, 21)
>> +#define UHS_REG_EXT_SAMPLE_DLY_MASK       GENMASK(30, 26)
>> +
>> +#define SDMMC_UHS_REG_EXT	0x108
>> +#define SDMMC_ENABLE_SHIFT	0x110
>> +
>> +#define TIMING_MODE     3
>> +#define TIMING_CFG_NUM 10
>> +
>> +#define PULL_DOWN BIT(1)
>> +#define PULL_UP   BIT(0)
>> +
>> +#define NUM_PHASES (40)
>> +
>> +#define ENABLE_SHIFT_MIN_SMPL (4)
>> +#define ENABLE_SHIFT_MAX_SMPL (12)
>> +#define USE_DLY_MIN_SMPL (11)
>> +#define USE_DLY_MAX_SMPL (14)
>> +
>>  struct k3_priv {
>> +	u8 ctrl_id;
>> +	u32 cur_speed;
>>  	struct regmap	*reg;
>>  };
>>  
>> @@ -38,6 +73,41 @@ static unsigned long dw_mci_hi6220_caps[] = {
>>  	0
>>  };
>>  
>> +struct hs_timing {
>> +	int drv_phase;
>> +	int sam_dly;
>> +	int sam_phase_max;
>> +	int sam_phase_min;
>> +};
>> +
>> +struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = {
>> +	{ /* reserved */ },
>> +	{ /* SD */
>> +		{7, 0, 15, 15,},  /* 0: LEGACY 400k */
>> +		{6, 0,  4,  4,},  /* 1: MMC_HS */
>> +		{6, 0,  3,  3,},  /* 2: SD_HS */
>> +		{6, 0, 15, 15,},  /* 3: SDR12 */
>> +		{6, 0,  2,  2,},  /* 4: SDR25 */
>> +		{4, 0, 11,  0,},  /* 5: SDR50 */
>> +		{6, 4, 15,  0,},  /* 6: SDR104 */
>> +		{0},              /* 7: DDR50 */
>> +		{0},              /* 8: DDR52 */
>> +		{0},              /* 9: HS200 */
>> +	},
>> +	{ /* SDIO */
>> +		{7, 0, 15, 15,},  /* 0: LEGACY 400k */
>> +		{0},              /* 1: MMC_HS */
>> +		{6, 0, 15, 15,},  /* 2: SD_HS */
>> +		{6, 0, 15, 15,},  /* 3: SDR12 */
>> +		{6, 0,  0,  0,},  /* 4: SDR25 */
>> +		{4, 0, 12,  0,},  /* 5: SDR50 */
>> +		{5, 4, 15,  0,},  /* 6: SDR104 */
>> +		{0},              /* 7: DDR50 */
>> +		{0},              /* 8: DDR52 */
>> +		{0},              /* 9: HS200 */
>> +	}
>> +};
>> +
>>  static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
>>  {
>>  	int ret;
>> @@ -66,6 +136,10 @@ static int dw_mci_hi6220_parse_dt(struct dw_mci *host)
>>  	if (IS_ERR(priv->reg))
>>  		priv->reg = NULL;
>>  
>> +	priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
>> +	if (priv->ctrl_id < 0)
>> +		priv->ctrl_id = 0;
>> +
>>  	host->priv = priv;
>>  	return 0;
>>  }
>> @@ -144,7 +218,242 @@ static const struct dw_mci_drv_data hi6220_data = {
>>  	.execute_tuning		= dw_mci_hi6220_execute_tuning,
>>  };
>>  
>> +static void dw_mci_hs_set_timing(struct dw_mci *host, int timing, int sam_phase)
>> +{
>> +	int drv_phase;
>> +	int sam_dly;
>> +	int ctrl_id;
>> +	int use_sam_dly = 0;
>> +	int enable_shift = 0;
>> +	int reg_value;
>> +	struct k3_priv *priv;
>> +
>> +	priv = host->priv;
>> +	ctrl_id = priv->ctrl_id;
>> +
>> +	drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase;
>> +	sam_dly   = hs_timing_cfg[ctrl_id][timing].sam_dly;
>> +	if (sam_phase == -1)
>> +		sam_phase = (hs_timing_cfg[ctrl_id][timing].sam_phase_max +
>> +			     hs_timing_cfg[ctrl_id][timing].sam_phase_min) / 2;
>> +
>> +	if (timing == MMC_TIMING_UHS_SDR50 ||
>> +	    timing == MMC_TIMING_UHS_SDR104) {
>> +		if (sam_phase >= ENABLE_SHIFT_MIN_SMPL &&
>> +		    sam_phase <= ENABLE_SHIFT_MAX_SMPL)
>> +			enable_shift = 1;
>> +	}
>> +	if (timing == MMC_TIMING_UHS_SDR104) {
>> +		if (sam_phase >= USE_DLY_MIN_SMPL &&
>> +		    sam_phase <= USE_DLY_MAX_SMPL)
>> +			use_sam_dly = 1;
>> +	}
>> +
>> +	mci_writel(host, GPIO, 0x0);
>> +	usleep_range(5, 10);
>> +
>> +	reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, sam_phase) |\
>> +				FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK ,sam_dly) |\
>> +				FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK,drv_phase);		
>> +	mci_writel(host, UHS_REG_EXT, reg_value);
>> +
>> +	mci_writel(host, ENABLE_SHIFT, enable_shift);
>> +
>> +	reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) |\
>> +				FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK,use_sam_dly);
>> +	mci_writel(host, GPIO, (unsigned int)reg_value | GPIO_CLK_ENABLE);
>> +
>> +	/* We should delay 1ms wait for timing setting finished. */
>> +	usleep_range(1000, 2000);
>> +}
>> +
>> +int dw_mci_hi3660_init(struct dw_mci *host)
>> +{
>> +	/* set threshold to 512 bytes */
>> +	mci_writel(host, CDTHRCTL, 0x02000001);
>> +
>> +	dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1);
>> +	host->bus_hz /= (GENCLK_DIV + 1);
>> +
>> +	return 0;
>> +}
>> +
>> +static int dw_mci_set_sel18(struct dw_mci *host, bool set)
>> +{
>> +	int ret;
>> +	unsigned int val;
>> +	struct k3_priv *priv;
>> +
>> +	priv = host->priv;
>> +
>> +	val = set ? SDCARD_IO_SEL18 : 0;
>> +	ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5,
>> +				 SDCARD_IO_SEL18, val);
>> +	if (ret) {
>> +		dev_err(host->dev, "sel18 %u error\n", val);
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios)
>> +{
>> +	int ret;
>> +	unsigned long wanted;
>> +	unsigned long actual;
>> +	struct k3_priv *priv = host->priv;
>> +
>> +	if (!ios->clock || ios->clock == priv->cur_speed)
>> +		return;
>> +
>> +	wanted = ios->clock * (GENCLK_DIV + 1);
>> +	ret = clk_set_rate(host->ciu_clk, wanted);
>> +	if (ret) {
>> +		dev_err(host->dev, "failed to set rate %luHz\n", wanted);
>> +		return;
>> +	}
>> +	actual = clk_get_rate(host->ciu_clk);
>> +
>> +	dw_mci_hs_set_timing(host, ios->timing, -1);
>> +	host->bus_hz = actual / (GENCLK_DIV + 1);
>> +	host->current_speed = 0;
>> +	priv->cur_speed = host->bus_hz;
>> +}
>> +
>> +static int dw_mci_get_best_clksmpl(unsigned int sample_flag)
>> +{
>> +	int i;
>> +	int interval;
>> +	unsigned int v;
>> +	unsigned int len;
>> +	unsigned int range_start = 0;
>> +	unsigned int range_length = 0;
>> +	unsigned int middle_range = 0;
>> +
>> +	if (!sample_flag)
>> +		return -EIO;
>> +
>> +	if (~sample_flag == 0)
>> +		return 0;
>> +
>> +	i = ffs(sample_flag) - 1;
>> +
>> +	/*A clock cycle is divided into 32 phases, 
>> +	*each of which is represented by a bit, finding the optimal phase.
>> +	*/
>> +	while (i < 32) {
>> +		v = ror32(sample_flag, i);
>> +		len = ffs(~v) - 1;
>> +
>> +		if (len > range_length) {
>> +			range_length = len;
>> +			range_start = i;
>> +		}
>> +
>> +		interval = ffs(v >> len) - 1;
>> +		if (interval < 0)
>> +			break;
>> +
>> +		i += len + interval;
>> +	}
>> +
>> +	middle_range = range_start + range_length / 2;
>> +	if (middle_range >= 32)
>> +		middle_range %= 32;
>> +
>> +	return middle_range;
>> +}
>> +
>> +static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
>> +{
>> +	int i = 0;
>> +	struct dw_mci *host = slot->host;
>> +	struct mmc_host *mmc = slot->mmc;
>> +	int sam_phase = 0;
>> +	u32 tuning_sample_flag = 0;
>> +	int best_clksmpl = 0;
>> +
>> +	for (i = 0; i < NUM_PHASES; ++i, ++sam_phase) {
>> +		sam_phase %= 32;
>> +
>> +		mci_writel(host, TMOUT, ~0);
>> +		dw_mci_hs_set_timing(host, mmc->ios.timing, sam_phase);
>> +
>> +		if (!mmc_send_tuning(mmc, opcode, NULL))
>> +			tuning_sample_flag |= (1 << sam_phase);
>> +		else
>> +			tuning_sample_flag &= ~(1 << sam_phase);
>> +	}
>> +
>> +	best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag);
>> +	if (best_clksmpl < 0) {
>> +		dev_err(host->dev, "All phases bad!\n");
>> +		return -EIO;
>> +	}
>> +
>> +	dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl);
>> +
>> +	dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n",
>> +		 best_clksmpl, tuning_sample_flag);
>> +	return 0;
>> +}
>> +
>> +static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc,
>> +					struct mmc_ios *ios)
>> +{
>> +	int ret;
>> +	int min_uv = 0;
>> +	int max_uv = 0;
>> +	struct dw_mci_slot *slot = mmc_priv(mmc);
>> +	struct k3_priv *priv;
>> +	struct dw_mci *host;
>> +
>> +	host = slot->host;
>> +	priv = host->priv;
>> +
>> +	if (!priv || !priv->reg)
>> +		return 0;
>> +
>> +	if (priv->ctrl_id == DWMMC_SDIO_ID)
>> +		return 0;
>> +
>> +	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
>> +		ret = dw_mci_set_sel18(host, 0);
>> +		if (ret)
>> +			return ret;
>> +		min_uv = 2950000;
>> +		max_uv = 2950000;
>> +	} else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
>> +		ret = dw_mci_set_sel18(host, 1);
>> +		if (ret)
>> +			return ret;
>> +		min_uv = 1800000;
>> +		max_uv = 1800000;
>> +	}
>> +
>> +	if (IS_ERR_OR_NULL(mmc->supply.vqmmc))
>> +		return 0;
>> +
>> +	ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
>> +	if (ret) {
>> +		dev_dbg(host->dev, "Regulator set error %d: %d - %d\n",
>> +			ret, min_uv, max_uv);
>> +		return ret;
>> +	}
>> +	return 0;
>> +}
>> +
>> +static const struct dw_mci_drv_data hi3660_data = {
>> +	.init = dw_mci_hi3660_init,
>> +	.set_ios = dw_mci_hi3660_set_ios,
>> +	.parse_dt = dw_mci_hi6220_parse_dt,
>> +	.execute_tuning = dw_mci_hi3660_execute_tuning,
>> +	.switch_voltage  = dw_mci_hi3660_switch_voltage,
>> +};
>> +
>>  static const struct of_device_id dw_mci_k3_match[] = {
>> +	{ .compatible = "hisilicon,hi3660-dw-mshc", .data = &hi3660_data, },
>>  	{ .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
>>  	{ .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, },
>>  	{},
>> @@ -155,6 +464,11 @@ static int dw_mci_k3_probe(struct platform_device *pdev)
>>  {
>>  	const struct dw_mci_drv_data *drv_data;
>>  	const struct of_device_id *match;
>> +	struct reset_control	*rst;
>> +
>> +	rst = devm_reset_control_get(&pdev->dev, NULL);
>> +	if (!IS_ERR(rst))
>> +		reset_control_reset(rst);
>>  
>>  	match = of_match_node(dw_mci_k3_match, pdev->dev.of_node);
>>  	drv_data = match->data;
>>
> 
> 
>

[toc] | [prev] | [next] | [standalone]

#1664454 — 答复: [PATCH v3] mmc: dw_mmc-k3: add sd support for hi3660

From"liwei (CM)" <liwei213@huawei.com>
Date2017-06-13 08:00 +0200
Subject答复: [PATCH v3] mmc: dw_mmc-k3: add sd support for hi3660
Message-ID<tRN1T-41I-1@gated-at.bofh.it>
In reply to#1663293
Hi, Jaehoon
Thank you very much for your advices; I'll follow your advices and fix all the other places but except for the following one:

"You have assumption...always.
mshc0 -> eMMC, 
mshc1 -> SD
mshc2 -> SDIO"

yes, mshc0 -> eMMC, mshc1 -> SD,mshc2 -> SDIO. Can you point it out in detail? 

Thanks!


-----邮件原件-----
发件人: Jaehoon Chung [mailto:jh80.chung@gmail.com] 
发送时间: 2017年6月12日 22:28
收件人: liwei (CM); ulf.hansson@linaro.org; adrian.hunter@intel.com; jh80.chung@samsung.com; shawn.lin@rock-chips.com; wsa+renesas@sang-engineering.com; hkallweit1@gmail.com; linux-mmc@vger.kernel.org; linux-kernel@vger.kernel.org
抄送: guodong.xu@linaro.org
主题: Re: [PATCH v3] mmc: dw_mmc-k3: add sd support for hi3660

Hi Li,

On 2017년 06월 12일 16:46, liwei wrote:
> Add sd card support for hi3660 soc
> 
> Major changes in v3:
>  - solve review comments from Heiner Kallweit.
>    *use the GENMASK and FIELD_PREP macros replace the bit shift operation.
>    *use usleep_range() replace udelay() and mdelay().

I had added the some comments about your previous patch.
Refer to below...

https://patchwork.kernel.org/patch/9747495/

> 
> Signed-off-by: Li Wei <liwei213@huawei.com>
> Signed-off-by: Chen Jun <chenjun14@huawei.com>
> ---

Locate changelog at here.

Best Regards,
Jaehoon Chung

>  drivers/mmc/host/dw_mmc-k3.c | 314 
> +++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 314 insertions(+)
> 
> diff --git a/drivers/mmc/host/dw_mmc-k3.c 
> b/drivers/mmc/host/dw_mmc-k3.c index e38fb0020bb1..a6e13bd83b9f 100644
> --- a/drivers/mmc/host/dw_mmc-k3.c
> +++ b/drivers/mmc/host/dw_mmc-k3.c
> @@ -8,6 +8,8 @@
>   * (at your option) any later version.
>   */
>  
> +#include <linux/bitops.h>
> +#include <linux/bitfield.h>
>  #include <linux/clk.h>
>  #include <linux/mfd/syscon.h>
>  #include <linux/mmc/host.h>
> @@ -28,7 +30,40 @@
>  #define AO_SCTRL_SEL18		BIT(10)
>  #define AO_SCTRL_CTRL3		0x40C
>  
> +#define DWMMC_SD_ID   1
> +#define DWMMC_SDIO_ID 2
> +
> +#define SOC_SCTRL_SCPERCTRL5    (0x314)
> +#define SDCARD_IO_SEL18         BIT(2)
> +
> +#define GENCLK_DIV (7)
> +
> +#define GPIO_CLK_ENABLE                   BIT(16)
> +#define GPIO_CLK_DIV_MASK                 GENMASK(11, 8)
> +#define GPIO_USE_SAMPLE_DLY_MASK          GENMASK(13, 13)
> +#define UHS_REG_EXT_SAMPLE_PHASE_MASK     GENMASK(20, 16)
> +#define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK  GENMASK(25, 21)
> +#define UHS_REG_EXT_SAMPLE_DLY_MASK       GENMASK(30, 26)
> +
> +#define SDMMC_UHS_REG_EXT	0x108
> +#define SDMMC_ENABLE_SHIFT	0x110
> +
> +#define TIMING_MODE     3
> +#define TIMING_CFG_NUM 10
> +
> +#define PULL_DOWN BIT(1)
> +#define PULL_UP   BIT(0)
> +
> +#define NUM_PHASES (40)
> +
> +#define ENABLE_SHIFT_MIN_SMPL (4)
> +#define ENABLE_SHIFT_MAX_SMPL (12)
> +#define USE_DLY_MIN_SMPL (11)
> +#define USE_DLY_MAX_SMPL (14)
> +
>  struct k3_priv {
> +	u8 ctrl_id;
> +	u32 cur_speed;
>  	struct regmap	*reg;
>  };
>  
> @@ -38,6 +73,41 @@ static unsigned long dw_mci_hi6220_caps[] = {
>  	0
>  };
>  
> +struct hs_timing {
> +	int drv_phase;
> +	int sam_dly;
> +	int sam_phase_max;
> +	int sam_phase_min;
> +};
> +
> +struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = {
> +	{ /* reserved */ },
> +	{ /* SD */
> +		{7, 0, 15, 15,},  /* 0: LEGACY 400k */
> +		{6, 0,  4,  4,},  /* 1: MMC_HS */
> +		{6, 0,  3,  3,},  /* 2: SD_HS */
> +		{6, 0, 15, 15,},  /* 3: SDR12 */
> +		{6, 0,  2,  2,},  /* 4: SDR25 */
> +		{4, 0, 11,  0,},  /* 5: SDR50 */
> +		{6, 4, 15,  0,},  /* 6: SDR104 */
> +		{0},              /* 7: DDR50 */
> +		{0},              /* 8: DDR52 */
> +		{0},              /* 9: HS200 */
> +	},
> +	{ /* SDIO */
> +		{7, 0, 15, 15,},  /* 0: LEGACY 400k */
> +		{0},              /* 1: MMC_HS */
> +		{6, 0, 15, 15,},  /* 2: SD_HS */
> +		{6, 0, 15, 15,},  /* 3: SDR12 */
> +		{6, 0,  0,  0,},  /* 4: SDR25 */
> +		{4, 0, 12,  0,},  /* 5: SDR50 */
> +		{5, 4, 15,  0,},  /* 6: SDR104 */
> +		{0},              /* 7: DDR50 */
> +		{0},              /* 8: DDR52 */
> +		{0},              /* 9: HS200 */
> +	}
> +};
> +
>  static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios 
> *ios)  {
>  	int ret;
> @@ -66,6 +136,10 @@ static int dw_mci_hi6220_parse_dt(struct dw_mci *host)
>  	if (IS_ERR(priv->reg))
>  		priv->reg = NULL;
>  
> +	priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
> +	if (priv->ctrl_id < 0)
> +		priv->ctrl_id = 0;
> +
>  	host->priv = priv;
>  	return 0;
>  }
> @@ -144,7 +218,242 @@ static const struct dw_mci_drv_data hi6220_data = {
>  	.execute_tuning		= dw_mci_hi6220_execute_tuning,
>  };
>  
> +static void dw_mci_hs_set_timing(struct dw_mci *host, int timing, int 
> +sam_phase) {
> +	int drv_phase;
> +	int sam_dly;
> +	int ctrl_id;
> +	int use_sam_dly = 0;
> +	int enable_shift = 0;
> +	int reg_value;
> +	struct k3_priv *priv;
> +
> +	priv = host->priv;
> +	ctrl_id = priv->ctrl_id;
> +
> +	drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase;
> +	sam_dly   = hs_timing_cfg[ctrl_id][timing].sam_dly;
> +	if (sam_phase == -1)
> +		sam_phase = (hs_timing_cfg[ctrl_id][timing].sam_phase_max +
> +			     hs_timing_cfg[ctrl_id][timing].sam_phase_min) / 2;
> +
> +	if (timing == MMC_TIMING_UHS_SDR50 ||
> +	    timing == MMC_TIMING_UHS_SDR104) {
> +		if (sam_phase >= ENABLE_SHIFT_MIN_SMPL &&
> +		    sam_phase <= ENABLE_SHIFT_MAX_SMPL)
> +			enable_shift = 1;
> +	}
> +	if (timing == MMC_TIMING_UHS_SDR104) {
> +		if (sam_phase >= USE_DLY_MIN_SMPL &&
> +		    sam_phase <= USE_DLY_MAX_SMPL)
> +			use_sam_dly = 1;
> +	}
> +
> +	mci_writel(host, GPIO, 0x0);
> +	usleep_range(5, 10);
> +
> +	reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, sam_phase) |\
> +				FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK ,sam_dly) |\
> +				FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK,drv_phase);		
> +	mci_writel(host, UHS_REG_EXT, reg_value);
> +
> +	mci_writel(host, ENABLE_SHIFT, enable_shift);
> +
> +	reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) |\
> +				FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK,use_sam_dly);
> +	mci_writel(host, GPIO, (unsigned int)reg_value | GPIO_CLK_ENABLE);
> +
> +	/* We should delay 1ms wait for timing setting finished. */
> +	usleep_range(1000, 2000);
> +}
> +
> +int dw_mci_hi3660_init(struct dw_mci *host) {
> +	/* set threshold to 512 bytes */
> +	mci_writel(host, CDTHRCTL, 0x02000001);
> +
> +	dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1);
> +	host->bus_hz /= (GENCLK_DIV + 1);
> +
> +	return 0;
> +}
> +
> +static int dw_mci_set_sel18(struct dw_mci *host, bool set) {
> +	int ret;
> +	unsigned int val;
> +	struct k3_priv *priv;
> +
> +	priv = host->priv;
> +
> +	val = set ? SDCARD_IO_SEL18 : 0;
> +	ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5,
> +				 SDCARD_IO_SEL18, val);
> +	if (ret) {
> +		dev_err(host->dev, "sel18 %u error\n", val);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios) 
> +{
> +	int ret;
> +	unsigned long wanted;
> +	unsigned long actual;
> +	struct k3_priv *priv = host->priv;
> +
> +	if (!ios->clock || ios->clock == priv->cur_speed)
> +		return;
> +
> +	wanted = ios->clock * (GENCLK_DIV + 1);
> +	ret = clk_set_rate(host->ciu_clk, wanted);
> +	if (ret) {
> +		dev_err(host->dev, "failed to set rate %luHz\n", wanted);
> +		return;
> +	}
> +	actual = clk_get_rate(host->ciu_clk);
> +
> +	dw_mci_hs_set_timing(host, ios->timing, -1);
> +	host->bus_hz = actual / (GENCLK_DIV + 1);
> +	host->current_speed = 0;
> +	priv->cur_speed = host->bus_hz;
> +}
> +
> +static int dw_mci_get_best_clksmpl(unsigned int sample_flag) {
> +	int i;
> +	int interval;
> +	unsigned int v;
> +	unsigned int len;
> +	unsigned int range_start = 0;
> +	unsigned int range_length = 0;
> +	unsigned int middle_range = 0;
> +
> +	if (!sample_flag)
> +		return -EIO;
> +
> +	if (~sample_flag == 0)
> +		return 0;
> +
> +	i = ffs(sample_flag) - 1;
> +
> +	/*A clock cycle is divided into 32 phases, 
> +	*each of which is represented by a bit, finding the optimal phase.
> +	*/
> +	while (i < 32) {
> +		v = ror32(sample_flag, i);
> +		len = ffs(~v) - 1;
> +
> +		if (len > range_length) {
> +			range_length = len;
> +			range_start = i;
> +		}
> +
> +		interval = ffs(v >> len) - 1;
> +		if (interval < 0)
> +			break;
> +
> +		i += len + interval;
> +	}
> +
> +	middle_range = range_start + range_length / 2;
> +	if (middle_range >= 32)
> +		middle_range %= 32;
> +
> +	return middle_range;
> +}
> +
> +static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot, u32 
> +opcode) {
> +	int i = 0;
> +	struct dw_mci *host = slot->host;
> +	struct mmc_host *mmc = slot->mmc;
> +	int sam_phase = 0;
> +	u32 tuning_sample_flag = 0;
> +	int best_clksmpl = 0;
> +
> +	for (i = 0; i < NUM_PHASES; ++i, ++sam_phase) {
> +		sam_phase %= 32;
> +
> +		mci_writel(host, TMOUT, ~0);
> +		dw_mci_hs_set_timing(host, mmc->ios.timing, sam_phase);
> +
> +		if (!mmc_send_tuning(mmc, opcode, NULL))
> +			tuning_sample_flag |= (1 << sam_phase);
> +		else
> +			tuning_sample_flag &= ~(1 << sam_phase);
> +	}
> +
> +	best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag);
> +	if (best_clksmpl < 0) {
> +		dev_err(host->dev, "All phases bad!\n");
> +		return -EIO;
> +	}
> +
> +	dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl);
> +
> +	dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n",
> +		 best_clksmpl, tuning_sample_flag);
> +	return 0;
> +}
> +
> +static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc,
> +					struct mmc_ios *ios)
> +{
> +	int ret;
> +	int min_uv = 0;
> +	int max_uv = 0;
> +	struct dw_mci_slot *slot = mmc_priv(mmc);
> +	struct k3_priv *priv;
> +	struct dw_mci *host;
> +
> +	host = slot->host;
> +	priv = host->priv;
> +
> +	if (!priv || !priv->reg)
> +		return 0;
> +
> +	if (priv->ctrl_id == DWMMC_SDIO_ID)
> +		return 0;
> +
> +	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
> +		ret = dw_mci_set_sel18(host, 0);
> +		if (ret)
> +			return ret;
> +		min_uv = 2950000;
> +		max_uv = 2950000;
> +	} else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
> +		ret = dw_mci_set_sel18(host, 1);
> +		if (ret)
> +			return ret;
> +		min_uv = 1800000;
> +		max_uv = 1800000;
> +	}
> +
> +	if (IS_ERR_OR_NULL(mmc->supply.vqmmc))
> +		return 0;
> +
> +	ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
> +	if (ret) {
> +		dev_dbg(host->dev, "Regulator set error %d: %d - %d\n",
> +			ret, min_uv, max_uv);
> +		return ret;
> +	}
> +	return 0;
> +}
> +
> +static const struct dw_mci_drv_data hi3660_data = {
> +	.init = dw_mci_hi3660_init,
> +	.set_ios = dw_mci_hi3660_set_ios,
> +	.parse_dt = dw_mci_hi6220_parse_dt,
> +	.execute_tuning = dw_mci_hi3660_execute_tuning,
> +	.switch_voltage  = dw_mci_hi3660_switch_voltage, };
> +
>  static const struct of_device_id dw_mci_k3_match[] = {
> +	{ .compatible = "hisilicon,hi3660-dw-mshc", .data = &hi3660_data, },
>  	{ .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
>  	{ .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, },
>  	{},
> @@ -155,6 +464,11 @@ static int dw_mci_k3_probe(struct platform_device 
> *pdev)  {
>  	const struct dw_mci_drv_data *drv_data;
>  	const struct of_device_id *match;
> +	struct reset_control	*rst;
> +
> +	rst = devm_reset_control_get(&pdev->dev, NULL);
> +	if (!IS_ERR(rst))
> +		reset_control_reset(rst);
>  
>  	match = of_match_node(dw_mci_k3_match, pdev->dev.of_node);
>  	drv_data = match->data;
>

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web