Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1661500 > unrolled thread

Re: [PATCH v2 7/7] arm64: dts: marvell: use new binding for the system controller on ap806

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH v2 7/7] arm64: dts: marvell: use new binding for the system controller on ap806 Gregory CLEMENT <gregory.clement@free-electrons.com> - 2017-06-08 19:10 +0200

#1661500 — Re: [PATCH v2 7/7] arm64: dts: marvell: use new binding for the system controller on ap806

Hi,
 
 On mer., mai 31 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:

> The new binding for the system controller on ap806 moved the clock into a
> subnode. This preliminary step will allow to add gpio and pinctrl
> subnodes
>
> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>


Applied on mvebu/dt64

Gregory

> ---
>  arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 19 +++++++++++--------
>  1 file changed, 11 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 0c25ec62a2a3..205037e3e7dc 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -193,7 +193,7 @@
>  				#size-cells = <0>;
>  				cell-index = <0>;
>  				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> -				clocks = <&ap_syscon 3>;
> +				clocks = <&ap_clk 3>;
>  				status = "disabled";
>  			};
>  
> @@ -204,7 +204,7 @@
>  				#size-cells = <0>;
>  				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
>  				timeout-ms = <1000>;
> -				clocks = <&ap_syscon 3>;
> +				clocks = <&ap_clk 3>;
>  				status = "disabled";
>  			};
>  
> @@ -214,7 +214,7 @@
>  				reg-shift = <2>;
>  				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>  				reg-io-width = <1>;
> -				clocks = <&ap_syscon 3>;
> +				clocks = <&ap_clk 3>;
>  				status = "disabled";
>  			};
>  
> @@ -224,7 +224,7 @@
>  				reg-shift = <2>;
>  				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
>  				reg-io-width = <1>;
> -				clocks = <&ap_syscon 3>;
> +				clocks = <&ap_clk 3>;
>  				status = "disabled";
>  
>  			};
> @@ -234,17 +234,20 @@
>  				reg = <0x6e0000 0x300>;
>  				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
>  				clock-names = "core";
> -				clocks = <&ap_syscon 4>;
> +				clocks = <&ap_clk 4>;
>  				dma-coherent;
>  				marvell,xenon-phy-slow-mode;
>  				status = "disabled";
>  			};
>  
>  			ap_syscon: system-controller@6f4000 {
> -				compatible = "marvell,ap806-system-controller",
> -					     "syscon";
> -				#clock-cells = <1>;
> +				compatible = "syscon", "simple-mfd";
>  				reg = <0x6f4000 0x1000>;
> +
> +				ap_clk: clock {
> +					compatible = "marvell,ap806-clock";
> +					#clock-cells = <1>;
> +				};
>  			};
>  		};
>  	};
> -- 
> git-series 0.9.1
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web