Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1660817 > unrolled thread

[PATCH v6 00/12] rk808: Add RK805 support

Back to article view | Back to linux.kernel

Contents

  [PATCH v6 00/12] rk808: Add RK805 support Jianhong Chen <chenjh@rock-chips.com> - 2017-06-08 09:20 +0200
    [PATCH v6 01/12] mfd: rk808: fix up the chip id get failed Jianhong Chen <chenjh@rock-chips.com> - 2017-06-08 09:20 +0200
    [PATCH v6 03/12] regulator: rk808: Add regulator driver for RK805 Jianhong Chen <chenjh@rock-chips.com> - 2017-06-08 09:20 +0200
      Re: [PATCH v6 03/12] regulator: rk808: Add regulator driver for RK805 Mark Brown <broonie@kernel.org> - 2017-06-08 13:20 +0200
    [PATCH v6 04/12] mfd: rk808: Add RK805 support Jianhong Chen <chenjh@rock-chips.com> - 2017-06-08 09:20 +0200
    [PATCH v6 05/12] clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 Jianhong Chen <chenjh@rock-chips.com> - 2017-06-08 09:30 +0200
    [PATCH v6 11/12] mfd: rk808: Add RK805 power key support Jianhong Chen <chenjh@rock-chips.com> - 2017-06-08 09:40 +0200
    [PATCH v6 06/12] rtc: Kconfig: Name RK805 in Kconfig for RTC_DRV_RK808 Jianhong Chen <chenjh@rock-chips.com> - 2017-06-08 09:40 +0200
    [PATCH v6 12/12] gpio: dt-bindings: add bindings for Rockchip RK805 PMIC Jianhong Chen <chenjh@rock-chips.com> - 2017-06-08 09:40 +0200
      Re: [PATCH v6 12/12] gpio: dt-bindings: add bindings for Rockchip  RK805 PMIC Linus Walleij <linus.walleij@linaro.org> - 2017-06-09 13:40 +0200
      Re: [PATCH v6 12/12] gpio: dt-bindings: add bindings for Rockchip  RK805 PMIC Rob Herring <robh@kernel.org> - 2017-06-12 18:00 +0200
    [PATCH v6 10/12] mfd: rk808: Add RK805 gpio support Jianhong Chen <chenjh@rock-chips.com> - 2017-06-08 09:40 +0200
    [PATCH v6 08/12] gpio: Add GPIO driver for the RK805 PMIC Jianhong Chen <chenjh@rock-chips.com> - 2017-06-08 09:40 +0200
      Re: [PATCH v6 08/12] gpio: Add GPIO driver for the RK805 PMIC Linus Walleij <linus.walleij@linaro.org> - 2017-06-09 13:40 +0200
        Re: [PATCH v6 08/12] gpio: Add GPIO driver for the RK805 PMIC Heiko Stuebner <heiko@sntech.de> - 2017-06-09 14:20 +0200
          Re: [PATCH v6 08/12] gpio: Add GPIO driver for the RK805 PMIC Jianhong Chen <chenjh@rock-chips.com> - 2017-06-14 14:10 +0200
    [PATCH v6 09/12] Input: Add power key driver for Rockchip RK805 PMIC Jianhong Chen <chenjh@rock-chips.com> - 2017-06-08 09:40 +0200
    [PATCH v6 07/12] mfd: dt-bindings: Add RK805 device tree bindings document Jianhong Chen <chenjh@rock-chips.com> - 2017-06-08 09:40 +0200
      Re: [PATCH v6 07/12] mfd: dt-bindings: Add RK805 device tree  bindings document Rob Herring <robh@kernel.org> - 2017-06-08 21:30 +0200

#1660817 — [PATCH v6 00/12] rk808: Add RK805 support

From: chenjh <chenjh@rock-chips.com>

change in v6:
patch1~7 no changed in V6.
add patch 8~12 for gpio and powerkey func for rk805.

change in v5:
PATCH V5 1/7: NO change in V5
PATCH V5 2/7: fix the rk805 reg addr in numerical order
PATCH V5 3/7: NO change in V5
PATCH V5 4/7: fix up the rk805_device_shutdown func
PATCH V5 5/7: NO change in V5
PATCH V5 6/7: NO change in V5
PATCH V5 7/7: fix up the description of the rk805

change in v4:
PATCH V4 1/7: NO change in V4
PATCH V4 2/7: rename the commit message
PATCH V4 3/7: NO change in V4
PATCH V4 4/7: Split this patch up into subsystems patch 5/7 6/7
PATCH V4 5/7: new added
PATCH V4 6/7: new added
PATCH V4 7/7: NO change in V4


change in V3:
PATCH V3 1/5: NO change in V3
PATCH V3 2/5: add rk805 RTC INT MASK define
PATCH V3 3/5: RK805 set suspend enable and disable is different from rk808
              use rk805_regs_ops and rk805_switch_ops
PATCH V3 4/5: fix up the shutdown func
              use pm_shutdown_prepare_fn to prepare shutdown
              and pm_pwroff_fn pull down gpio to shut down rk805
              it will update in the future(after rk808 support gpio func)
PATCH V3 5/5: NO change in V3

change in V2:
PATCH V2 1/5: NO change in V2
PATCH V2 2/5: add rk805 BUCK ILMAX define
PATCH V2 3/5: NO change in V2
PATCH V2 4/5: setting RK805 BUCK ILMAX in pre init
PATCH V2 5/5: Add RK805 device tree bindings document

Elaine Zhang (7):
  mfd: rk808: fix up the chip id get failed
  mfd: rk808: add rk805 regs addr and ID
  regulator: rk808: Add regulator driver for RK805
  mfd: rk808: Add RK805 support
  clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808
  rtc: Kconfig: Name RK805 in Kconfig for RTC_DRV_RK808
  mfd: dt-bindings: Add RK805 device tree bindings document

chenjh (5):
  gpio: Add GPIO driver for the RK805 PMIC
  Input: Add power key driver for Rockchip RK805 PMIC
  mfd: rk808: Add RK805 gpio support
  mfd: rk808: Add RK805 power key support
  gpio: dt-bindings: add bindings for Rockchip RK805 PMIC

 .../devicetree/bindings/gpio/gpio-rk805.txt        |  37 ++++
 Documentation/devicetree/bindings/mfd/rk808.txt    |  22 +-
 drivers/clk/Kconfig                                |   4 +-
 drivers/gpio/Kconfig                               |   6 +
 drivers/gpio/Makefile                              |   1 +
 drivers/gpio/gpio-rk805.c                          | 234 +++++++++++++++++++++
 drivers/input/misc/Kconfig                         |   6 +
 drivers/input/misc/Makefile                        |   1 +
 drivers/input/misc/rk805-pwrkey.c                  | 111 ++++++++++
 drivers/mfd/Kconfig                                |   4 +-
 drivers/mfd/rk808.c                                | 147 ++++++++++++-
 drivers/regulator/Kconfig                          |   4 +-
 drivers/regulator/rk808-regulator.c                | 130 ++++++++++++
 drivers/rtc/Kconfig                                |   4 +-
 include/linux/mfd/rk808.h                          | 121 +++++++++++
 15 files changed, 817 insertions(+), 15 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-rk805.txt
 create mode 100644 drivers/gpio/gpio-rk805.c
 create mode 100644 drivers/input/misc/rk805-pwrkey.c

-- 
1.9.1

[toc] | [next] | [standalone]

#1660820 — [PATCH v6 01/12] mfd: rk808: fix up the chip id get failed

From: Elaine Zhang <zhangqing@rock-chips.com>

the rk8xx chip id is:
((MSB << 8) | LSB) & 0xfff0

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
 drivers/mfd/rk808.c       | 21 +++++++++++++++------
 include/linux/mfd/rk808.h |  1 +
 2 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index fd087cb..3334a2a 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -325,7 +325,7 @@ static int rk808_probe(struct i2c_client *client,
 	void (*pm_pwroff_fn)(void);
 	int nr_pre_init_regs;
 	int nr_cells;
-	int pm_off = 0;
+	int pm_off = 0, msb, lsb;
 	int ret;
 	int i;
 
@@ -333,14 +333,23 @@ static int rk808_probe(struct i2c_client *client,
 	if (!rk808)
 		return -ENOMEM;
 
-	rk808->variant = i2c_smbus_read_word_data(client, RK808_ID_MSB);
-	if (rk808->variant < 0) {
-		dev_err(&client->dev, "Failed to read the chip id at 0x%02x\n",
+	/* read Chip variant */
+	msb = i2c_smbus_read_byte_data(client, RK808_ID_MSB);
+	if (msb < 0) {
+		dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
 			RK808_ID_MSB);
-		return rk808->variant;
+		return msb;
 	}
 
-	dev_dbg(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
+	lsb = i2c_smbus_read_byte_data(client, RK808_ID_LSB);
+	if (lsb < 0) {
+		dev_err(&client->dev, "failed to read the chip id at 0x%x\n",
+			RK808_ID_LSB);
+		return lsb;
+	}
+
+	rk808->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
+	dev_info(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
 
 	switch (rk808->variant) {
 	case RK808_ID:
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 83701ef..54feb14 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -298,6 +298,7 @@ enum rk818_reg {
 #define VOUT_LO_INT	BIT(0)
 #define CLK32KOUT2_EN	BIT(0)
 
+#define RK8XX_ID_MSK			0xfff0
 enum {
 	BUCK_ILMIN_50MA,
 	BUCK_ILMIN_100MA,
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1660822 — [PATCH v6 03/12] regulator: rk808: Add regulator driver for RK805

From: Elaine Zhang <zhangqing@rock-chips.com>

Add support for the rk805 regulator. The regulator module consists
of 4 DCDCs, 3 LDOs.

The output voltages are configurable and are meant to supply power
to the main processor and other components.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
 drivers/regulator/Kconfig           |   4 +-
 drivers/regulator/rk808-regulator.c | 130 ++++++++++++++++++++++++++++++++++++
 2 files changed, 132 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index be06eb2..285e280 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -650,11 +650,11 @@ config REGULATOR_RC5T583
 	  outputs which can be controlled by i2c communication.
 
 config REGULATOR_RK808
-	tristate "Rockchip RK808/RK818 Power regulators"
+	tristate "Rockchip RK805/RK808/RK818 Power regulators"
 	depends on MFD_RK808
 	help
 	  Select this option to enable the power regulator of ROCKCHIP
-	  PMIC RK808 and RK818.
+	  PMIC RK805,RK808 and RK818.
 	  This driver supports the control of different power rails of device
 	  through regulator interface. The device supports multiple DCDC/LDO
 	  outputs which can be controlled by i2c communication.
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index fb44d52..128c81e 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -65,6 +65,27 @@
 /* max steps for increase voltage of Buck1/2, equal 100mv*/
 #define MAX_STEPS_ONE_TIME 8
 
+#define RK805_DESC(_id, _match, _supply, _min, _max, _step, _vreg,      \
+	_vmask, _ereg, _emask, _etime)                                  \
+	[_id] = {                                                       \
+		.name           = (_match),                             \
+		.supply_name    = (_supply),                            \
+		.of_match       = of_match_ptr(_match),                 \
+		.regulators_node = of_match_ptr("regulators"),          \
+		.type           = REGULATOR_VOLTAGE,                    \
+		.id             = (_id),                                \
+		.n_voltages     = (((_max) - (_min)) / (_step) + 1),    \
+		.owner          = THIS_MODULE,                          \
+		.min_uV         = (_min) * 1000,                        \
+		.uV_step        = (_step) * 1000,                       \
+		.vsel_reg       = (_vreg),                              \
+		.vsel_mask      = (_vmask),                             \
+		.enable_reg     = (_ereg),                              \
+		.enable_mask    = (_emask),                             \
+		.enable_time    = (_etime),                             \
+		.ops            = &rk805_reg_ops,                       \
+	}
+
 #define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg,	\
 	_vmask, _ereg, _emask, _etime)					\
 	[_id] = {							\
@@ -298,6 +319,28 @@ static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
 				  sel);
 }
 
+static int rk805_set_suspend_enable(struct regulator_dev *rdev)
+{
+	unsigned int reg;
+
+	reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
+
+	return regmap_update_bits(rdev->regmap, reg,
+				  rdev->desc->enable_mask,
+				  rdev->desc->enable_mask);
+}
+
+static int rk805_set_suspend_disable(struct regulator_dev *rdev)
+{
+	unsigned int reg;
+
+	reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
+
+	return regmap_update_bits(rdev->regmap, reg,
+				  rdev->desc->enable_mask,
+				  0);
+}
+
 static int rk808_set_suspend_enable(struct regulator_dev *rdev)
 {
 	unsigned int reg;
@@ -320,6 +363,27 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
 				  rdev->desc->enable_mask);
 }
 
+static struct regulator_ops rk805_reg_ops = {
+		.list_voltage           = regulator_list_voltage_linear,
+		.map_voltage            = regulator_map_voltage_linear,
+		.get_voltage_sel        = regulator_get_voltage_sel_regmap,
+		.set_voltage_sel        = regulator_set_voltage_sel_regmap,
+		.enable                 = regulator_enable_regmap,
+		.disable                = regulator_disable_regmap,
+		.is_enabled             = regulator_is_enabled_regmap,
+		.set_suspend_voltage    = rk808_set_suspend_voltage,
+		.set_suspend_enable     = rk805_set_suspend_enable,
+		.set_suspend_disable    = rk805_set_suspend_disable,
+};
+
+static struct regulator_ops rk805_switch_ops = {
+		.enable                 = regulator_enable_regmap,
+		.disable                = regulator_disable_regmap,
+		.is_enabled             = regulator_is_enabled_regmap,
+		.set_suspend_enable     = rk805_set_suspend_enable,
+		.set_suspend_disable    = rk805_set_suspend_disable,
+};
+
 static struct regulator_ops rk808_buck1_2_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
@@ -369,6 +433,68 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev)
 	.set_suspend_disable	= rk808_set_suspend_disable,
 };
 
+static const struct regulator_desc rk805_reg[] = {
+	{
+		.name = "DCDC_REG1",
+		.supply_name = "vcc1",
+		.of_match = of_match_ptr("DCDC_REG1"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK805_ID_DCDC1,
+		.ops = &rk805_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = 712500,
+		.uV_step = 12500,
+		.n_voltages = 64,
+		.vsel_reg = RK805_BUCK1_ON_VSEL_REG,
+		.vsel_mask = RK818_BUCK_VSEL_MASK,
+		.enable_reg = RK805_DCDC_EN_REG,
+		.enable_mask = BIT(0),
+		.owner = THIS_MODULE,
+	}, {
+		.name = "DCDC_REG2",
+		.supply_name = "vcc2",
+		.of_match = of_match_ptr("DCDC_REG2"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK805_ID_DCDC2,
+		.ops = &rk805_reg_ops,
+		.type = REGULATOR_VOLTAGE,
+		.min_uV = 712500,
+		.uV_step = 12500,
+		.n_voltages = 64,
+		.vsel_reg = RK805_BUCK2_ON_VSEL_REG,
+		.vsel_mask = RK818_BUCK_VSEL_MASK,
+		.enable_reg = RK805_DCDC_EN_REG,
+		.enable_mask = BIT(1),
+		.owner = THIS_MODULE,
+	}, {
+		.name = "DCDC_REG3",
+		.supply_name = "vcc3",
+		.of_match = of_match_ptr("DCDC_REG3"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = RK805_ID_DCDC3,
+		.ops = &rk805_switch_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 1,
+		.enable_reg = RK805_DCDC_EN_REG,
+		.enable_mask = BIT(2),
+		.owner = THIS_MODULE,
+	},
+
+	RK805_DESC(RK805_ID_DCDC4, "DCDC_REG4", "vcc4", 800, 3400, 100,
+		RK805_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK,
+		RK805_DCDC_EN_REG, BIT(3), 0),
+
+	RK805_DESC(RK805_ID_LDO1, "LDO_REG1", "vcc5", 800, 3400, 100,
+		RK805_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
+		BIT(0), 400),
+	RK805_DESC(RK805_ID_LDO2, "LDO_REG2", "vcc5", 800, 3400, 100,
+		RK805_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
+		BIT(1), 400),
+	RK805_DESC(RK805_ID_LDO3, "LDO_REG3", "vcc6", 800, 3400, 100,
+		RK805_LDO3_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG,
+		BIT(2), 400),
+};
+
 static const struct regulator_desc rk808_reg[] = {
 	{
 		.name = "DCDC_REG1",
@@ -625,6 +751,10 @@ static int rk808_regulator_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, pdata);
 
 	switch (rk808->variant) {
+	case RK805_ID:
+		regulators = rk805_reg;
+		nregulators = RK805_NUM_REGULATORS;
+		break;
 	case RK808_ID:
 		regulators = rk808_reg;
 		nregulators = RK808_NUM_REGULATORS;
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1661061 — Re: [PATCH v6 03/12] regulator: rk808: Add regulator driver for RK805

[Multipart message — attachments visible in raw view] — view raw

On Thu, Jun 08, 2017 at 03:12:30PM +0800, Jianhong Chen wrote:
> From: Elaine Zhang <zhangqing@rock-chips.com>
> 
> Add support for the rk805 regulator. The regulator module consists
> of 4 DCDCs, 3 LDOs.

Acked-by: Mark Brown <broonie@kernel.org>

[toc] | [prev] | [next] | [standalone]

#1660824 — [PATCH v6 04/12] mfd: rk808: Add RK805 support

From: Elaine Zhang <zhangqing@rock-chips.com>

The RK805 chip is a Power Management IC (PMIC) for multimedia and handheld
devices. It contains the following components:

    - Regulators
    - RTC
    - Clocking

Both RK808 and RK805 chips are using a similar register map,
so we can reuse the RTC and Clocking functionality.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
 drivers/mfd/Kconfig |   4 +-
 drivers/mfd/rk808.c | 108 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 110 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 55ecdfb..b410a34 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -892,13 +892,13 @@ config MFD_RC5T583
 	  different functionality of the device.
 
 config MFD_RK808
-	tristate "Rockchip RK808/RK818 Power Management Chip"
+	tristate "Rockchip RK805/RK808/RK818 Power Management Chip"
 	depends on I2C && OF
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	help
-	  If you say yes here you get support for the RK808 and RK818
+	  If you say yes here you get support for the RK805, RK808 and RK818
 	  Power Management chips.
 	  This driver provides common support for accessing the device
 	  through I2C interface. The device supports multiple sub-devices
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 3334a2a..7276555 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -70,6 +70,14 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 	.volatile_reg = rk808_is_volatile_reg,
 };
 
+static const struct regmap_config rk805_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = RK805_OFF_SOURCE_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = rk808_is_volatile_reg,
+};
+
 static const struct regmap_config rk808_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -86,6 +94,16 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 	}
 };
 
+static const struct mfd_cell rk805s[] = {
+	{ .name = "rk808-clkout", },
+	{ .name = "rk808-regulator", },
+	{
+		.name = "rk808-rtc",
+		.num_resources = ARRAY_SIZE(rtc_resources),
+		.resources = &rtc_resources[0],
+	},
+};
+
 static const struct mfd_cell rk808s[] = {
 	{ .name = "rk808-clkout", },
 	{ .name = "rk808-regulator", },
@@ -106,6 +124,20 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 	},
 };
 
+static const struct rk808_reg_data rk805_pre_init_reg[] = {
+	{RK805_BUCK1_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
+				 RK805_BUCK1_2_ILMAX_4000MA},
+	{RK805_BUCK2_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
+				 RK805_BUCK1_2_ILMAX_4000MA},
+	{RK805_BUCK3_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
+				 RK805_BUCK3_ILMAX_3000MA},
+	{RK805_BUCK4_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
+				 RK805_BUCK4_ILMAX_3500MA},
+	{RK805_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_400MA},
+	{RK805_GPIO_IO_POL_REG, SLP_SD_MSK, SLEEP_FUN},
+	{RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
+};
+
 static const struct rk808_reg_data rk808_pre_init_reg[] = {
 	{ RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_150MA },
 	{ RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK,  BUCK_ILMIN_200MA },
@@ -135,6 +167,41 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 						    VB_LO_SEL_3500MV },
 };
 
+static const struct regmap_irq rk805_irqs[] = {
+	[RK805_IRQ_PWRON_RISE] = {
+		.mask = RK805_IRQ_PWRON_RISE_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_VB_LOW] = {
+		.mask = RK805_IRQ_VB_LOW_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_PWRON] = {
+		.mask = RK805_IRQ_PWRON_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_PWRON_LP] = {
+		.mask = RK805_IRQ_PWRON_LP_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_HOTDIE] = {
+		.mask = RK805_IRQ_HOTDIE_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_RTC_ALARM] = {
+		.mask = RK805_IRQ_RTC_ALARM_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_RTC_PERIOD] = {
+		.mask = RK805_IRQ_RTC_PERIOD_MSK,
+		.reg_offset = 0,
+	},
+	[RK805_IRQ_PWRON_FALL] = {
+		.mask = RK805_IRQ_PWRON_FALL_MSK,
+		.reg_offset = 0,
+	},
+};
+
 static const struct regmap_irq rk808_irqs[] = {
 	/* INT_STS */
 	[RK808_IRQ_VOUT_LO] = {
@@ -247,6 +314,17 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 	},
 };
 
+static struct regmap_irq_chip rk805_irq_chip = {
+	.name = "rk805",
+	.irqs = rk805_irqs,
+	.num_irqs = ARRAY_SIZE(rk805_irqs),
+	.num_regs = 1,
+	.status_base = RK805_INT_STS_REG,
+	.mask_base = RK805_INT_STS_MSK_REG,
+	.ack_base = RK805_INT_STS_REG,
+	.init_ack_masked = true,
+};
+
 static const struct regmap_irq_chip rk808_irq_chip = {
 	.name = "rk808",
 	.irqs = rk808_irqs,
@@ -272,6 +350,25 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 };
 
 static struct i2c_client *rk808_i2c_client;
+
+static void rk805_device_shutdown(void)
+{
+	int ret;
+	struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+
+	if (!rk808) {
+		dev_warn(&rk808_i2c_client->dev,
+			 "have no rk805, so do nothing here\n");
+		return;
+	}
+
+	ret = regmap_update_bits(rk808->regmap,
+				 RK805_DEV_CTRL_REG,
+				 DEV_OFF, DEV_OFF);
+	if (ret)
+		dev_err(&rk808_i2c_client->dev, "power off error!\n");
+}
+
 static void rk808_device_shutdown(void)
 {
 	int ret;
@@ -309,6 +406,7 @@ static void rk818_device_shutdown(void)
 }
 
 static const struct of_device_id rk808_of_match[] = {
+	{ .compatible = "rockchip,rk805" },
 	{ .compatible = "rockchip,rk808" },
 	{ .compatible = "rockchip,rk818" },
 	{ },
@@ -352,6 +450,15 @@ static int rk808_probe(struct i2c_client *client,
 	dev_info(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
 
 	switch (rk808->variant) {
+	case RK805_ID:
+		rk808->regmap_cfg = &rk805_regmap_config;
+		rk808->regmap_irq_chip = &rk805_irq_chip;
+		pre_init_reg = rk805_pre_init_reg;
+		nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
+		cells = rk805s;
+		nr_cells = ARRAY_SIZE(rk805s);
+		pm_pwroff_fn = rk805_device_shutdown;
+		break;
 	case RK808_ID:
 		rk808->regmap_cfg = &rk808_regmap_config;
 		rk808->regmap_irq_chip = &rk808_irq_chip;
@@ -444,6 +551,7 @@ static int rk808_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id rk808_ids[] = {
+	{ "rk805" },
 	{ "rk808" },
 	{ "rk818" },
 	{ },
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1660829 — [PATCH v6 05/12] clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808

From: Elaine Zhang <zhangqing@rock-chips.com>

The RK808 and RK805 PMICs are using a similar register map.
We can reuse the clk driver for the RK805 PMIC. So let's add
the RK805 in the Kconfig description.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
 drivers/clk/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 9356ab4..7ca8f02 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -39,10 +39,10 @@ config COMMON_CLK_MAX77686
 	  clock.
 
 config COMMON_CLK_RK808
-	tristate "Clock driver for RK808/RK818"
+	tristate "Clock driver for RK805/RK808/RK818"
 	depends on MFD_RK808
 	---help---
-	  This driver supports RK808 and RK818 crystal oscillator clock. These
+	  This driver supports RK805, RK808 and RK818 crystal oscillator clock. These
 	  multi-function devices have two fixed-rate oscillators,
 	  clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
 	  by control register.
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1660837 — [PATCH v6 11/12] mfd: rk808: Add RK805 power key support

From: chenjh <chenjh@rock-chips.com>

Signed-off-by: chenjh <chenjh@rock-chips.com>
---
 drivers/mfd/rk808.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index f7cdcf5..d1e8d35 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -94,6 +94,19 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 	}
 };
 
+static struct resource rk805_key_resources[] = {
+	{
+		.start  = RK805_IRQ_PWRON_FALL,
+		.end    = RK805_IRQ_PWRON_FALL,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = RK805_IRQ_PWRON_RISE,
+		.end    = RK805_IRQ_PWRON_RISE,
+		.flags  = IORESOURCE_IRQ,
+	}
+};
+
 static const struct mfd_cell rk805s[] = {
 	{ .name = "rk808-clkout", },
 	{ .name = "rk808-regulator", },
@@ -103,6 +116,10 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 		.num_resources = ARRAY_SIZE(rtc_resources),
 		.resources = &rtc_resources[0],
 	},
+	{	.name = "rk805-pwrkey",
+		.num_resources = ARRAY_SIZE(rk805_key_resources),
+		.resources = &rk805_key_resources[0],
+	},
 };
 
 static const struct mfd_cell rk808s[] = {
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1660839 — [PATCH v6 06/12] rtc: Kconfig: Name RK805 in Kconfig for RTC_DRV_RK808

From: Elaine Zhang <zhangqing@rock-chips.com>

The RK808 and RK805 PMICs are using a similar register map.
We can reuse the rtc driver for the RK805 PMIC. So let's add
the RK805 in the Kconfig description.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
 drivers/rtc/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 5dc673d..47d6a8d 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -352,11 +352,11 @@ config RTC_DRV_MAX77686
 	  will be called rtc-max77686.
 
 config RTC_DRV_RK808
-	tristate "Rockchip RK808/RK818 RTC"
+	tristate "Rockchip RK805/RK808/RK818 RTC"
 	depends on MFD_RK808
 	help
 	  If you say yes here you will get support for the
-	  RTC of RK808 and RK818 PMIC.
+	  RTC of RK805, RK808 and RK818 PMIC.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called rk808-rtc.
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1660843 — [PATCH v6 12/12] gpio: dt-bindings: add bindings for Rockchip RK805 PMIC

From: chenjh <chenjh@rock-chips.com>

Add device tree bindings documentation for Rockchip's RK805 PMIC

Signed-off-by: chenjh <chenjh@rock-chips.com>
---
 .../devicetree/bindings/gpio/gpio-rk805.txt        | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-rk805.txt

diff --git a/Documentation/devicetree/bindings/gpio/gpio-rk805.txt b/Documentation/devicetree/bindings/gpio/gpio-rk805.txt
new file mode 100644
index 0000000..98b75fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-rk805.txt
@@ -0,0 +1,37 @@
+RK805 GPIO controller
+
+This driver follows the usual GPIO bindings found in
+Documentation/devicetree/bindings/gpio/gpio.txt
+
+Required properties:
+- #gpio-cells: Should be two. The first cell is the pin number and the
+  second is the GPIO flags.
+- gpio-controller: Marks the device node as a GPIO controller.
+
+These properties must be added in the RK805 PMIC node, documented in
+Documentation/devicetree/bindings/mfd/rk808.txt
+
+Example:
+
+rk805: pmic@18 {
+	compatible = "rockchip,rk808";
+	clock-output-names = "xin32k", "rk808-clkout2";
+	interrupt-parent = <&gpio0>;
+	interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+	reg = <0x1a>;
+	rockchip,system-power-controller;
+	wakeup-source;
+	#clock-cells = <1>;
+	...
+	gpio-controller;
+	#gpio-cells = <2>;
+};
+
+
+Example of a peripheral using the PMIC GPIOs:
+
+wireless-bluetooth {
+		compatible = "bluetooth-platdata";
+		...
+		gpios = <&rk805 0 GPIO_ACTIVE_HIGH>, <&rk805 1 GPIO_ACTIVE_HIGH>;
+};
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1662324 — Re: [PATCH v6 12/12] gpio: dt-bindings: add bindings for Rockchip RK805 PMIC

On Thu, Jun 8, 2017 at 9:33 AM, Jianhong Chen <chenjh@rock-chips.com> wrote:

> From: chenjh <chenjh@rock-chips.com>
>
> Add device tree bindings documentation for Rockchip's RK805 PMIC
>
> Signed-off-by: chenjh <chenjh@rock-chips.com>

This looks good.
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Just waiting for the DT maintainer to look at this.

Yours,
Linus Walleij

[toc] | [prev] | [next] | [standalone]

#1663803 — Re: [PATCH v6 12/12] gpio: dt-bindings: add bindings for Rockchip RK805 PMIC

On Thu, Jun 08, 2017 at 03:33:13PM +0800, Jianhong Chen wrote:
> From: chenjh <chenjh@rock-chips.com>
> 
> Add device tree bindings documentation for Rockchip's RK805 PMIC
> 
> Signed-off-by: chenjh <chenjh@rock-chips.com>
> ---
>  .../devicetree/bindings/gpio/gpio-rk805.txt        | 37 ++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/gpio-rk805.txt
> 
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-rk805.txt b/Documentation/devicetree/bindings/gpio/gpio-rk805.txt
> new file mode 100644
> index 0000000..98b75fa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/gpio-rk805.txt
> @@ -0,0 +1,37 @@
> +RK805 GPIO controller
> +
> +This driver follows the usual GPIO bindings found in
> +Documentation/devicetree/bindings/gpio/gpio.txt
> +
> +Required properties:
> +- #gpio-cells: Should be two. The first cell is the pin number and the
> +  second is the GPIO flags.
> +- gpio-controller: Marks the device node as a GPIO controller.
> +
> +These properties must be added in the RK805 PMIC node, documented in
> +Documentation/devicetree/bindings/mfd/rk808.txt
> +
> +Example:
> +
> +rk805: pmic@18 {
> +	compatible = "rockchip,rk808";
> +	clock-output-names = "xin32k", "rk808-clkout2";
> +	interrupt-parent = <&gpio0>;
> +	interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> +	reg = <0x1a>;
> +	rockchip,system-power-controller;
> +	wakeup-source;
> +	#clock-cells = <1>;
> +	...
> +	gpio-controller;
> +	#gpio-cells = <2>;
> +};
> +
> +
> +Example of a peripheral using the PMIC GPIOs:
> +
> +wireless-bluetooth {
> +		compatible = "bluetooth-platdata";

Not a valid example compatible. While you don't really have to have a 
valid one, it should be something that's not a "what not to do" and 
would never be accepted.

Rob

[toc] | [prev] | [next] | [standalone]

#1660844 — [PATCH v6 10/12] mfd: rk808: Add RK805 gpio support

From: chenjh <chenjh@rock-chips.com>

Signed-off-by: chenjh <chenjh@rock-chips.com>
---
 drivers/mfd/rk808.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 7276555..f7cdcf5 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -97,6 +97,7 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
 static const struct mfd_cell rk805s[] = {
 	{ .name = "rk808-clkout", },
 	{ .name = "rk808-regulator", },
+	{ .name = "rk805-gpio", },
 	{
 		.name = "rk808-rtc",
 		.num_resources = ARRAY_SIZE(rtc_resources),
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1660846 — [PATCH v6 08/12] gpio: Add GPIO driver for the RK805 PMIC

From: chenjh <chenjh@rock-chips.com>

RK805 has two configurable GPIOs that can be used for several
purposes. These are output only.

This driver is generic for other Rockchip PMICs to be added.

Signed-off-by: chenjh <chenjh@rock-chips.com>
---
 drivers/gpio/Kconfig      |   6 ++
 drivers/gpio/Makefile     |   1 +
 drivers/gpio/gpio-rk805.c | 234 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 241 insertions(+)
 create mode 100644 drivers/gpio/gpio-rk805.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 0504307..c8cca89 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -974,6 +974,12 @@ config GPIO_RC5T583
 	  This driver provides the support for driving/reading the gpio pins
 	  of RC5T583 device through standard gpio library.
 
+config GPIO_RK805
+	bool "Rockchip RK805 GPIO"
+	depends on MFD_RK808
+	help
+	  Select this option to enable GPIO driver for the RK805 PMIC.
+
 config GPIO_STMPE
 	bool "STMPE GPIOs"
 	depends on MFD_STMPE
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index becb96c..55ba941 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -99,6 +99,7 @@ obj-$(CONFIG_GPIO_PXA)		+= gpio-pxa.o
 obj-$(CONFIG_GPIO_RC5T583)	+= gpio-rc5t583.o
 obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
 obj-$(CONFIG_GPIO_RCAR)		+= gpio-rcar.o
+obj-$(CONFIG_GPIO_RK805)	+= gpio-rk805.o
 obj-$(CONFIG_ARCH_SA1100)	+= gpio-sa1100.o
 obj-$(CONFIG_GPIO_SCH)		+= gpio-sch.o
 obj-$(CONFIG_GPIO_SCH311X)	+= gpio-sch311x.o
diff --git a/drivers/gpio/gpio-rk805.c b/drivers/gpio/gpio-rk805.c
new file mode 100644
index 0000000..bc17c92
--- /dev/null
+++ b/drivers/gpio/gpio-rk805.c
@@ -0,0 +1,234 @@
+/*
+ * GPIO driver for Rockchip RK805 PMIC
+ *
+ * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Author: Chen Jianhong <chenjh@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on the TPS65218 driver
+ */
+
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/mfd/rk808.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* rk805 */
+#define RK805_OUT_REG		0x52
+#define RK805_OUT1_VAL_MSK	BIT(0)
+#define RK805_OUT2_VAL_MSK	BIT(1)
+
+#define OUTPUT_MODE		BIT(0)
+#define INPUT_MODE		BIT(1)
+
+/*
+ * @mode: supported modes for this gpio, i.e. OUTPUT_MODE, OUTPUT_MODE...
+ * @reg: gpio status setting register
+ * @func_mask: functions select mask value
+ * @dir_mask: input or output mask value
+ * @val_mask: gpio set value
+ */
+struct gpio_pin {
+	u8 mode;
+	u8 reg;
+	u8 func_mask;
+	u8 dir_msk;
+	u8 val_msk;
+};
+
+struct rk805_gpio {
+	struct device *dev;
+	struct gpio_chip chip;
+	struct gpio_pin *pins;
+	struct rk808 *rk808;
+};
+
+static int rk805_gpio_direction_input(struct gpio_chip *chip,
+				      unsigned offset)
+{
+	int ret;
+	struct rk805_gpio *gpio = gpiochip_get_data(chip);
+
+	if (!(gpio->pins[offset].mode & INPUT_MODE)) {
+		dev_err(gpio->dev, "gpio%d not support input mode\n", offset);
+		return -EINVAL;
+	}
+
+	if (gpio->pins[offset].dir_msk) {
+		ret = regmap_update_bits(gpio->rk808->regmap,
+					 gpio->pins[offset].reg,
+					 gpio->pins[offset].dir_msk, 0);
+		if (ret) {
+			dev_err(gpio->dev, "set gpio%d input failed\n", offset);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int rk805_gpio_direction_output(struct gpio_chip *chip,
+				       unsigned offset, int value)
+{
+	int ret;
+	struct rk805_gpio *gpio = gpiochip_get_data(chip);
+
+	if (!(gpio->pins[offset].mode & OUTPUT_MODE)) {
+		dev_err(gpio->dev, "gpio%d not support output mode\n", offset);
+		return -EINVAL;
+	}
+
+	if (gpio->pins[offset].dir_msk) {
+		ret = regmap_update_bits(gpio->rk808->regmap,
+					 gpio->pins[offset].reg,
+					 gpio->pins[offset].dir_msk,
+					 gpio->pins[offset].dir_msk);
+		if (ret) {
+			dev_err(gpio->dev, "set gpio%d out failed\n", offset);
+			return ret;
+		}
+	}
+
+	ret = regmap_update_bits(gpio->rk808->regmap,
+				 gpio->pins[offset].reg,
+				 gpio->pins[offset].val_msk,
+				 value ? gpio->pins[offset].val_msk : 0);
+	if (ret) {
+		dev_err(gpio->dev, "set gpio%d value failed\n", offset);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int rk805_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	int ret, val;
+	struct rk805_gpio *gpio = gpiochip_get_data(chip);
+
+	ret = regmap_read(gpio->rk808->regmap, gpio->pins[offset].reg, &val);
+	if (ret) {
+		dev_err(gpio->dev, "gpio%d not support output mode\n", offset);
+		return ret;
+	}
+
+	return (val & gpio->pins[offset].val_msk) ? 1 : 0;
+}
+
+static void rk805_gpio_set(struct gpio_chip *chip, unsigned offset,
+			   int value)
+{
+	struct rk805_gpio *gpio = gpiochip_get_data(chip);
+
+	if (!(gpio->pins[offset].mode & OUTPUT_MODE)) {
+		dev_err(gpio->dev, "gpio%d not support output mode\n", offset);
+		return;
+	}
+
+	regmap_update_bits(gpio->rk808->regmap,
+			   gpio->pins[offset].reg,
+			   gpio->pins[offset].val_msk,
+			   value ? gpio->pins[offset].val_msk : 0);
+}
+
+static int rk805_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	int ret;
+	struct rk805_gpio *gpio = gpiochip_get_data(chip);
+
+	/* switch to gpio mode */
+	if (gpio->pins[offset].func_mask) {
+		ret = regmap_update_bits(gpio->rk808->regmap,
+					 gpio->pins[offset].reg,
+					 gpio->pins[offset].func_mask,
+					 gpio->pins[offset].func_mask);
+		if (ret) {
+			dev_err(gpio->dev, "set gpio%d func failed\n", offset);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct gpio_chip rk805_chip = {
+	.label			= "rk805-gpio",
+	.owner			= THIS_MODULE,
+	.direction_input	= rk805_gpio_direction_input,
+	.direction_output	= rk805_gpio_direction_output,
+	.get			= rk805_gpio_get,
+	.set			= rk805_gpio_set,
+	.request		= rk805_gpio_request,
+	.base			= -1,
+	.ngpio			= 2,
+	.can_sleep		= true,
+};
+
+static struct gpio_pin rk805_gpio_pins[] = {
+	{
+		.mode = OUTPUT_MODE,
+		.reg = RK805_OUT_REG,
+		.val_msk = RK805_OUT1_VAL_MSK,
+	},
+	{
+		.mode = OUTPUT_MODE,
+		.reg = RK805_OUT_REG,
+		.val_msk = RK805_OUT2_VAL_MSK,
+	},
+};
+
+static int rk805_gpio_probe(struct platform_device *pdev)
+{
+	struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
+	struct i2c_client *client = rk808->i2c;
+	struct rk805_gpio *gpio;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	switch (rk808->variant) {
+	case RK805_ID:
+		gpio->chip = rk805_chip;
+		gpio->pins = rk805_gpio_pins;
+		break;
+	default:
+		dev_err(&pdev->dev, "unsupported RK8XX ID %lu\n",
+			rk808->variant);
+		return -EINVAL;
+	}
+
+	gpio->chip.parent = &client->dev;
+	gpio->rk808 = rk808;
+	gpio->dev = &pdev->dev;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
+	return 0;
+}
+
+static struct platform_driver rk805_gpio_driver = {
+	.probe = rk805_gpio_probe,
+	.driver = {
+		.name = "rk805-gpio",
+	},
+};
+module_platform_driver(rk805_gpio_driver);
+
+MODULE_AUTHOR("Chen Jianghong <chenjh@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip RK805 PMIC GPIO driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1662321 — Re: [PATCH v6 08/12] gpio: Add GPIO driver for the RK805 PMIC

Heiko, can you please look at this patch.

On Thu, Jun 8, 2017 at 9:30 AM, Jianhong Chen <chenjh@rock-chips.com> wrote:

> From: chenjh <chenjh@rock-chips.com>

Full name please.

> RK805 has two configurable GPIOs that can be used for several
> purposes. These are output only.
>
> This driver is generic for other Rockchip PMICs to be added.
>
> Signed-off-by: chenjh <chenjh@rock-chips.com>

Dito.

Your commit message says they are output-only, yet you implement
.direction_input(). So what is is going to be?

> +#include <linux/i2c.h>
> +#include <linux/gpio.h>

Only use:
#include <linux/gpio/driver.h>

> +/*
> + * @mode: supported modes for this gpio, i.e. OUTPUT_MODE, OUTPUT_MODE...

Are you saying this should be an enum or a set of flags?

> +static int rk805_gpio_get(struct gpio_chip *chip, unsigned offset)
> +{
> +       int ret, val;
> +       struct rk805_gpio *gpio = gpiochip_get_data(chip);
> +
> +       ret = regmap_read(gpio->rk808->regmap, gpio->pins[offset].reg, &val);
> +       if (ret) {
> +               dev_err(gpio->dev, "gpio%d not support output mode\n", offset);
> +               return ret;
> +       }
> +
> +       return (val & gpio->pins[offset].val_msk) ? 1 : 0;

Do this:

return !!(val & gpio->pins[offset].val_msk)

> +static int rk805_gpio_request(struct gpio_chip *chip, unsigned offset)
> +{
> +       int ret;
> +       struct rk805_gpio *gpio = gpiochip_get_data(chip);
> +
> +       /* switch to gpio mode */
> +       if (gpio->pins[offset].func_mask) {
> +               ret = regmap_update_bits(gpio->rk808->regmap,
> +                                        gpio->pins[offset].reg,
> +                                        gpio->pins[offset].func_mask,
> +                                        gpio->pins[offset].func_mask);
> +               if (ret) {
> +                       dev_err(gpio->dev, "set gpio%d func failed\n", offset);
> +                       return ret;
> +               }
> +       }
> +
> +       return 0;
> +}

This is pin control. Why don't you implement a proper pin control
driver for this chip?

If you don't, this will just come back and haunt you.

Why not merge the driver into drivers/pinctrl/* and name it
pinctrl-rk805.c to begin with?

> +static const struct gpio_chip rk805_chip = {
> +       .label                  = "rk805-gpio",
> +       .owner                  = THIS_MODULE,
> +       .direction_input        = rk805_gpio_direction_input,
> +       .direction_output       = rk805_gpio_direction_output,

Please implement .get_direction()

> +       .get                    = rk805_gpio_get,
> +       .set                    = rk805_gpio_set,
> +       .request                = rk805_gpio_request,
> +       .base                   = -1,
> +       .ngpio                  = 2,
> +       .can_sleep              = true,

Consider assigning the .names[] array some pin names.

Yours,
Linus Walleij

[toc] | [prev] | [next] | [standalone]

#1662368 — Re: [PATCH v6 08/12] gpio: Add GPIO driver for the RK805 PMIC

Hi,

Am Freitag, 9. Juni 2017, 13:37:26 CEST schrieb Linus Walleij:
> Heiko, can you please look at this patch.
> 
> On Thu, Jun 8, 2017 at 9:30 AM, Jianhong Chen <chenjh@rock-chips.com> wrote:
> 
> > From: chenjh <chenjh@rock-chips.com>
> 
> Full name please.

git config --global user.name "John Doe"

might do the trick and make this permanent for all your commits :-)


> > RK805 has two configurable GPIOs that can be used for several
> > purposes. These are output only.
> >
> > This driver is generic for other Rockchip PMICs to be added.
> >
> > Signed-off-by: chenjh <chenjh@rock-chips.com>
> 
> Dito.
> 
> Your commit message says they are output-only, yet you implement
> .direction_input(). So what is is going to be?

So far, I've only seen the rk808 and rk818. Both do not have any
configurable pins.

The rk805 which is a sort of variant of the above, does have the two
pins defined below, but in the manual I could also only find them as
output-only and having no other function than being output-pins.

So I don't really know if all the input- or "gpio-mode"- handling is only
an oversight (copy'n'paste) or if there are yet other rk808 variants around
that can actually be configured as inputs or even non-gpio modes?

I hope Jianhong will be able to answer that.


Heiko

> 
> > +#include <linux/i2c.h>
> > +#include <linux/gpio.h>
> 
> Only use:
> #include <linux/gpio/driver.h>
> 
> > +/*
> > + * @mode: supported modes for this gpio, i.e. OUTPUT_MODE, OUTPUT_MODE...
> 
> Are you saying this should be an enum or a set of flags?
> 
> > +static int rk805_gpio_get(struct gpio_chip *chip, unsigned offset)
> > +{
> > +       int ret, val;
> > +       struct rk805_gpio *gpio = gpiochip_get_data(chip);
> > +
> > +       ret = regmap_read(gpio->rk808->regmap, gpio->pins[offset].reg, &val);
> > +       if (ret) {
> > +               dev_err(gpio->dev, "gpio%d not support output mode\n", offset);
> > +               return ret;
> > +       }
> > +
> > +       return (val & gpio->pins[offset].val_msk) ? 1 : 0;
> 
> Do this:
> 
> return !!(val & gpio->pins[offset].val_msk)
> 
> > +static int rk805_gpio_request(struct gpio_chip *chip, unsigned offset)
> > +{
> > +       int ret;
> > +       struct rk805_gpio *gpio = gpiochip_get_data(chip);
> > +
> > +       /* switch to gpio mode */
> > +       if (gpio->pins[offset].func_mask) {
> > +               ret = regmap_update_bits(gpio->rk808->regmap,
> > +                                        gpio->pins[offset].reg,
> > +                                        gpio->pins[offset].func_mask,
> > +                                        gpio->pins[offset].func_mask);
> > +               if (ret) {
> > +                       dev_err(gpio->dev, "set gpio%d func failed\n", offset);
> > +                       return ret;
> > +               }
> > +       }
> > +
> > +       return 0;
> > +}
> 
> This is pin control. Why don't you implement a proper pin control
> driver for this chip?
> 
> If you don't, this will just come back and haunt you.
> 
> Why not merge the driver into drivers/pinctrl/* and name it
> pinctrl-rk805.c to begin with?
> 
> > +static const struct gpio_chip rk805_chip = {
> > +       .label                  = "rk805-gpio",
> > +       .owner                  = THIS_MODULE,
> > +       .direction_input        = rk805_gpio_direction_input,
> > +       .direction_output       = rk805_gpio_direction_output,
> 
> Please implement .get_direction()
> 
> > +       .get                    = rk805_gpio_get,
> > +       .set                    = rk805_gpio_set,
> > +       .request                = rk805_gpio_request,
> > +       .base                   = -1,
> > +       .ngpio                  = 2,
> > +       .can_sleep              = true,
> 
> Consider assigning the .names[] array some pin names.
> 
> Yours,
> Linus Walleij
> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
> 
> 

[toc] | [prev] | [next] | [standalone]

#1665737 — Re: [PATCH v6 08/12] gpio: Add GPIO driver for the RK805 PMIC

在 2017/6/9 20:17, Heiko Stuebner 写道:
> Hi,
>
> Am Freitag, 9. Juni 2017, 13:37:26 CEST schrieb Linus Walleij:
>> Heiko, can you please look at this patch.
>>
>> On Thu, Jun 8, 2017 at 9:30 AM, Jianhong Chen <chenjh@rock-chips.com> wrote:
>>
>>> From: chenjh <chenjh@rock-chips.com>
>> Full name please.
> git config --global user.name "John Doe"
>
> might do the and make this permanent for all your commits :-)
>
>>> RK805 has two configurable GPIOs that can be used for several
>>> purposes. These are output only.
>>>
>>> This driver is generic for other Rockchip PMICs to be added.
>>>
>>> Signed-off-by: chenjh <chenjh@rock-chips.com>
>> Dito.
>>
>> Your commit message says they are output-only, yet you implement
>> .direction_input(). So what is is going to be?
> So far, I've only seen the rk808 and rk818. Both do not have any
> configurable pins.
>
> The rk805 which is a sort of variant of the above, does have the two
> pins defined below, but in the manual I could also only find them as
> output-only and having no other function than being output-pins.
>
> So I don't really know if all the input- or "gpio-mode"- handling is only
> an oversight (copy'n'paste) or if there are yet other rk808 variants around
> that can actually be configured as inputs or even non-gpio modes?
>
> I hope Jianhong will be able to answer that.
>
>
> Heiko
This driver is not only for rk805, but also intend for rk816 and furtrue 
PMICs.
The rk816 has one multi function pin(TS/GPIO), when setting as gpio, it 
can be configured as output or input.
Here is simple description from manual: "Thermistor input. Connect a 
thermistor from this pin to ground. The thermistor is usually inside the 
battery pack. (multi-function for GPIO) ".

At beginning, I want to name it "gpio-rk8xx.c", but I found rk808 and 
rk818 don't have gpio function. So I abandon this name and use 
"gpio-rk805.c", but still implement
it as a generic driver for furture PMICs to be added.
>>> +#include <linux/i2c.h>
>>> +#include <linux/gpio.h>
>> Only use:
>> #include <linux/gpio/driver.h>
>>
>>> +/*
>>> + * @mode: supported modes for this gpio, i.e. OUTPUT_MODE, OUTPUT_MODE...
>> Are you saying this should be an enum or a set of flags?
Yes, as explain above,  these "OUTPUT_MODE, INPUTOUT" flags are prepared 
for RK816 or furture PMICs.  Maybe these should be enum are better.
>>> +static int rk805_gpio_get(struct gpio_chip *chip, unsigned offset)
>>> +{
>>> +       int ret, val;
>>> +       struct rk805_gpio *gpio = gpiochip_get_data(chip);
>>> +
>>> +       ret = regmap_read(gpio->rk808->regmap, gpio->pins[offset].reg, &val);
>>> +       if (ret) {
>>> +               dev_err(gpio->dev, "gpio%d not support output mode\n", offset);
>>> +               return ret;
>>> +       }
>>> +
>>> +       return (val & gpio->pins[offset].val_msk) ? 1 : 0;
>> Do this:
>>
>> return !!(val & gpio->pins[offset].val_msk)
>>
>>> +static int rk805_gpio_request(struct gpio_chip *chip, unsigned offset)
>>> +{
>>> +       int ret;
>>> +       struct rk805_gpio *gpio = gpiochip_get_data(chip);
>>> +
>>> +       /* switch to gpio mode */
>>> +       if (gpio->pins[offset].func_mask) {
>>> +               ret = regmap_update_bits(gpio->rk808->regmap,
>>> +                                        gpio->pins[offset].reg,
>>> +                                        gpio->pins[offset].func_mask,
>>> +                                        gpio->pins[offset].func_mask);
>>> +               if (ret) {
>>> +                       dev_err(gpio->dev, "set gpio%d func failed\n", offset);
>>> +                       return ret;
>>> +               }
>>> +       }
>>> +
>>> +       return 0;
>>> +}
>> This is pin control. Why don't you implement a proper pin control
>> driver for this chip?
>>
>> If you don't, this will just come back and haunt you.
>>
>> Why not merge the driver into drivers/pinctrl/* and name it
>> pinctrl-rk805.c to begin with?

Becuase I refered to other PMICs, I see most of their gpio driver is 
merged into drivers/gpio/*,  Only a few are added in drivers/pinctrl/*.
So, it is better to merge the driver into drivers/pinctrl/* ?

>>> +static const struct gpio_chip rk805_chip = {
>>> +       .label                  = "rk805-gpio",
>>> +       .owner                  = THIS_MODULE,
>>> +       .direction_input        = rk805_gpio_direction_input,
>>> +       .direction_output       = rk805_gpio_direction_output,
>> Please implement .get_direction()
>>
>>> +       .get                    = rk805_gpio_get,
>>> +       .set                    = rk805_gpio_set,
>>> +       .request                = rk805_gpio_request,
>>> +       .base                   = -1,
>>> +       .ngpio                  = 2,
>>> +       .can_sleep              = true,
>> Consider assigning the .names[] array some pin names.
>>
>> Yours,
>> Linus Walleij
>>
>> _______________________________________________
>> Linux-rockchip mailing list
>> Linux-rockchip@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>>
>>
>
>

-- 
陈健洪
E-mail：chenjh@rock-chips.com
福州瑞芯微电子股份有限公司
Fuzhou Rockchip Electronics Co.Ltd
福建省福州市铜盘路软件大道89号软件园A区21号楼 (350003)
No. 21 Building, A District, No.89,software Boulevard Fuzhou,Fujian,PRC
TEL：0591-83991906/07-8573

[toc] | [prev] | [next] | [standalone]

#1660857 — [PATCH v6 09/12] Input: Add power key driver for Rockchip RK805 PMIC

From: chenjh <chenjh@rock-chips.com>

This driver provides a input driver for the power
key on the Rockchip RK805 PMIC.

Signed-off-by: chenjh <chenjh@rock-chips.com>
---
 drivers/input/misc/Kconfig        |   6 +++
 drivers/input/misc/Makefile       |   1 +
 drivers/input/misc/rk805-pwrkey.c | 111 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 118 insertions(+)
 create mode 100644 drivers/input/misc/rk805-pwrkey.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 5b6c522..72dc4f5 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -571,6 +571,12 @@ config INPUT_PWM_BEEPER
 	  To compile this driver as a module, choose M here: the module will be
 	  called pwm-beeper.
 
+config INPUT_RK805_PWRKEY
+	tristate "Rockchip RK805 PMIC power key support"
+	depends on MFD_RK808
+	help
+	  Select this option to enable power key driver for RK805.
+
 config INPUT_GPIO_ROTARY_ENCODER
 	tristate "Rotary encoders connected to GPIO pins"
 	depends on GPIOLIB || COMPILE_TEST
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index b10523f..c27052a 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -63,6 +63,7 @@ obj-$(CONFIG_INPUT_REGULATOR_HAPTIC)	+= regulator-haptic.o
 obj-$(CONFIG_INPUT_RETU_PWRBUTTON)	+= retu-pwrbutton.o
 obj-$(CONFIG_INPUT_AXP20X_PEK)		+= axp20x-pek.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
+obj-$(CONFIG_INPUT_RK805_PWRKEY)	+= rk805-pwrkey.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_SIRFSOC_ONKEY)	+= sirfsoc-onkey.o
 obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY)	+= soc_button_array.o
diff --git a/drivers/input/misc/rk805-pwrkey.c b/drivers/input/misc/rk805-pwrkey.c
new file mode 100644
index 0000000..188eed5
--- /dev/null
+++ b/drivers/input/misc/rk805-pwrkey.c
@@ -0,0 +1,111 @@
+/*
+ * Rockchip RK805 PMIC Power Key driver
+ *
+ * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Author: Chen Jianhong <chenjh@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+static irqreturn_t pwrkey_fall_irq(int irq, void *_pwr)
+{
+	struct input_dev *pwr = _pwr;
+
+	input_report_key(pwr, KEY_POWER, 1);
+	input_sync(pwr);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pwrkey_rise_irq(int irq, void *_pwr)
+{
+	struct input_dev *pwr = _pwr;
+
+	input_report_key(pwr, KEY_POWER, 0);
+	input_sync(pwr);
+
+	return IRQ_HANDLED;
+}
+
+static int rk805_pwrkey_probe(struct platform_device *pdev)
+{
+	struct input_dev *pwr;
+	int fall_irq, rise_irq;
+	int err;
+
+	pwr = devm_input_allocate_device(&pdev->dev);
+	if (!pwr) {
+		dev_err(&pdev->dev, "Can't allocate power button\n");
+		return -ENOMEM;
+	}
+
+	pwr->name = "rk805 pwrkey";
+	pwr->phys = "rk805_pwrkey/input0";
+	pwr->dev.parent = &pdev->dev;
+	input_set_capability(pwr, EV_KEY, KEY_POWER);
+
+	fall_irq = platform_get_irq(pdev, 0);
+	if (fall_irq < 0) {
+		dev_err(&pdev->dev, "Can't get fall irq: %d\n", fall_irq);
+		return fall_irq;
+	}
+
+	rise_irq = platform_get_irq(pdev, 1);
+	if (rise_irq < 0) {
+		dev_err(&pdev->dev, "Can't get rise irq: %d\n", rise_irq);
+		return rise_irq;
+	}
+
+	err = devm_request_threaded_irq(&pwr->dev, fall_irq, NULL,
+					pwrkey_fall_irq,
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					"rk805_pwrkey_fall", pwr);
+	if (err < 0) {
+		dev_err(&pdev->dev, "Can't register fall irq: %d\n", err);
+		return err;
+	}
+
+	err = devm_request_threaded_irq(&pwr->dev, rise_irq, NULL,
+					pwrkey_rise_irq,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"rk805_pwrkey_rise", pwr);
+	if (err < 0) {
+		dev_err(&pdev->dev, "Can't register rise irq: %d\n", err);
+		return err;
+	}
+
+	err = input_register_device(pwr);
+	if (err) {
+		dev_err(&pdev->dev, "Can't register power button: %d\n", err);
+		return err;
+	}
+
+	platform_set_drvdata(pdev, pwr);
+	device_init_wakeup(&pdev->dev, true);
+
+	return 0;
+}
+
+static struct platform_driver rk805_pwrkey_driver = {
+	.probe	= rk805_pwrkey_probe,
+	.driver	= {
+		.name = "rk805-pwrkey",
+	},
+};
+module_platform_driver(rk805_pwrkey_driver);
+
+MODULE_AUTHOR("Chen Jianghong <chenjh@rock-chips.com>");
+MODULE_DESCRIPTION("RK805 PMIC Power Key driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1660861 — [PATCH v6 07/12] mfd: dt-bindings: Add RK805 device tree bindings document

From: Elaine Zhang <zhangqing@rock-chips.com>

Add device tree bindings documentation for Rockchip's RK805 PMIC.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
---
 Documentation/devicetree/bindings/mfd/rk808.txt | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 9636ae8..91b6522 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -1,11 +1,14 @@
 RK8XX Power Management Integrated Circuit
 
 The rk8xx family current members:
+rk805
 rk808
 rk818
 
 Required properties:
-- compatible: "rockchip,rk808", "rockchip,rk818"
+- compatible: "rockchip,rk805"
+- compatible: "rockchip,rk808"
+- compatible: "rockchip,rk818"
 - reg: I2C slave address
 - interrupt-parent: The parent interrupt controller.
 - interrupts: the interrupt outputs of the controller.
@@ -18,6 +21,14 @@ Optional properties:
 - rockchip,system-power-controller: Telling whether or not this pmic is controlling
   the system power.
 
+Optional RK805 properties:
+- vcc1-supply:  The input supply for DCDC_REG1
+- vcc2-supply:  The input supply for DCDC_REG2
+- vcc3-supply:  The input supply for DCDC_REG3
+- vcc4-supply:  The input supply for DCDC_REG4
+- vcc5-supply:  The input supply for LDO_REG1 and LDO_REG2
+- vcc6-supply:  The input supply for LDO_REG3
+
 Optional RK808 properties:
 - vcc1-supply:  The input supply for DCDC_REG1
 - vcc2-supply:  The input supply for DCDC_REG2
@@ -56,6 +67,15 @@ by a child node of the 'regulators' node.
 		/* standard regulator bindings here */
 	};
 
+Following regulators of the RK805 PMIC regulators are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK805 datasheet.
+
+	- DCDC_REGn
+		- valid values for n are 1 to 4.
+	- LDO_REGn
+		- valid values for n are 1 to 3
+
 Following regulators of the RK808 PMIC block are supported. Note that
 the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
 number as described in RK808 datasheet.
-- 
1.9.1

[toc] | [prev] | [next] | [standalone]

#1661609 — Re: [PATCH v6 07/12] mfd: dt-bindings: Add RK805 device tree bindings document

On Thu, Jun 08, 2017 at 03:28:49PM +0800, Jianhong Chen wrote:
> From: Elaine Zhang <zhangqing@rock-chips.com>
> 
> Add device tree bindings documentation for Rockchip's RK805 PMIC.
> 
> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
> ---
>  Documentation/devicetree/bindings/mfd/rk808.txt | 22 +++++++++++++++++++++-
>  1 file changed, 21 insertions(+), 1 deletion(-)

I acked v5. Please add acks when posting new versions.

Rob

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web