Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1660333 > unrolled thread

[PATCH 3.10 129/250] USB: serial: ftdi_sio: fix line-status over-reporting

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH 3.10 129/250] USB: serial: ftdi_sio: fix line-status over-reporting Willy Tarreau <w@1wt.eu> - 2017-06-08 01:10 +0200

#1660333 — [PATCH 3.10 129/250] USB: serial: ftdi_sio: fix line-status over-reporting

From: Johan Hovold <johan@kernel.org>

commit a6bb1e17a39818b01b55d8e6238b4b5f06d55038 upstream.

FTDI devices use a receive latency timer to periodically empty the
receive buffer and report modem and line status (also when the buffer is
empty).

When a break or error condition is detected the corresponding status
flags will be set on a packet with nonzero data payload and the flags
are not updated until the break is over or further characters are
received.

In order to avoid over-reporting break and error conditions, these flags
must therefore only be processed for packets with payload.

This specifically fixes the case where after an overrun, the error
condition is continuously reported and NULL-characters inserted until
further data is received.

Reported-by: Michael Walle <michael@walle.cc>
Fixes: 72fda3ca6fc1 ("USB: serial: ftd_sio: implement sysrq handling on
break")
Fixes: 166ceb690750 ("USB: ftdi_sio: clean up line-status handling")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
 drivers/usb/serial/ftdi_sio.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 960d0e4..ce884f7 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2089,6 +2089,20 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 		priv->prev_status = status;
 	}
 
+	/* save if the transmitter is empty or not */
+	if (packet[1] & FTDI_RS_TEMT)
+		priv->transmit_empty = 1;
+	else
+		priv->transmit_empty = 0;
+
+	len -= 2;
+	if (!len)
+		return 0;	/* status only */
+
+	/*
+	 * Break and error status must only be processed for packets with
+	 * data payload to avoid over-reporting.
+	 */
 	flag = TTY_NORMAL;
 	if (packet[1] & FTDI_RS_ERR_MASK) {
 		/* Break takes precedence over parity, which takes precedence
@@ -2111,15 +2125,6 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 		}
 	}
 
-	/* save if the transmitter is empty or not */
-	if (packet[1] & FTDI_RS_TEMT)
-		priv->transmit_empty = 1;
-	else
-		priv->transmit_empty = 0;
-
-	len -= 2;
-	if (!len)
-		return 0;	/* status only */
 	port->icount.rx += len;
 	ch = packet + 2;
 
-- 
2.8.0.rc2.1.gbe9624a

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web