Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1655517 > unrolled thread
| Started by | Ben Hutchings <ben@decadent.org.uk> |
|---|---|
| First post | 2017-06-01 18:50 +0200 |
| Last post | 2017-06-01 18:50 +0200 |
| Articles | 1 — 1 participant |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[PATCH 3.2 023/101] USB: serial: ftdi_sio: fix extreme low-latency setting Ben Hutchings <ben@decadent.org.uk> - 2017-06-01 18:50 +0200
| From | Ben Hutchings <ben@decadent.org.uk> |
|---|---|
| Date | 2017-06-01 18:50 +0200 |
| Subject | [PATCH 3.2 023/101] USB: serial: ftdi_sio: fix extreme low-latency setting |
| Message-ID | <tNBso-53m-85@gated-at.bofh.it> |
3.2.89-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <johan@kernel.org>
commit c6dce2626606ef16434802989466636bc28c1419 upstream.
Since commit 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY
flag") the FTDI driver has been using a receive latency-timer value of
1 ms instead of the device default of 16 ms.
The latency timer is used to periodically empty a non-full receive
buffer, but a status header is always sent when the timer expires
including when the buffer is empty. This means that a two-byte bulk
message is received every millisecond also for an otherwise idle port as
long as it is open.
Let's restore the pre-2009 behaviour which reduces the rate of the
status messages to 1/16th (e.g. interrupt frequency drops from 1 kHz to
62.5 Hz) by not setting ASYNC_LOW_LATENCY by default.
Anyone willing to pay the price for the minimum-latency behaviour should
set the flag explicitly instead using the TIOCSSERIAL ioctl or a tool
such as setserial (e.g. setserial /dev/ttyUSB0 low_latency).
Note that since commit 0cbd81a9f6ba ("USB: ftdi_sio: remove
tty->low_latency") the ASYNC_LOW_LATENCY flag has no other effects but
to set a minimal latency timer.
Reported-by: Antoine Aubert <a.aubert@overkiz.com>
Fixes: 557aaa7ffab6 ("ft232: support the ASYNC_LOW_LATENCY flag")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/usb/serial/ftdi_sio.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1864,8 +1864,6 @@ static int ftdi_sio_port_probe(struct us
mutex_init(&priv->cfg_lock);
memset(&priv->icount, 0x00, sizeof(priv->icount));
- priv->flags = ASYNC_LOW_LATENCY;
-
if (quirk && quirk->port_probe)
quirk->port_probe(priv);
Back to top | Article view | linux.kernel
csiph-web