Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1641391 > unrolled thread

[PATCH v4] DTS: ARM: OMAP5: uevm: add µSD card detect

Back to article view | Back to linux.kernel

Contents

  [PATCH v4] DTS: ARM: OMAP5: uevm: add µSD card detect "H. Nikolaus Schaller" <hns@goldelico.com> - 2017-05-15 10:40 +0200
    Re: [PATCH v4] DTS: ARM: OMAP5: uevm: add µSD card detect Tony Lindgren <tony@atomide.com> - 2017-05-16 18:50 +0200

#1641391 — [PATCH v4] DTS: ARM: OMAP5: uevm: add µSD card detect

If we have Linux installed in eMMC we can boot without
µSD card, but inserting one is not recognised.

The reason is that the card detect gpio (gpio5_152)
is not configured and attached to the mmc1 interface
driver and the mmc driver does not poll by default.

Hence we add pinmux and gpio setup for the SDCARD_NCD
signal.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 arch/arm/boot/dts/omap5-uevm.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index d58b034513da..1a6e28c3d847 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -142,6 +142,13 @@
 	};
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+
+	cd-gpios = <&gpio5 24 GPIO_ACTIVE_LOW>;	/* gpio5_152 */
+};
+
 &omap5_pmx_core {
 	evm_keys_pins: pinmux_evm_keys_gpio_pins {
 		pinctrl-single,pins = <
@@ -161,6 +168,12 @@
 			OMAP5_IOPAD(0x0a8, PIN_INPUT_PULLUP | MUX_MODE6)	/* gpio3_76 */
 		>;
 	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6)	/* gpio5_152 */
+		>;
+	};
 };
 
 &tpd12s015 {
-- 
2.12.2

[toc] | [next] | [standalone]

#1642672

* H. Nikolaus Schaller <hns@goldelico.com> [170515 01:35]:
> If we have Linux installed in eMMC we can boot without
> µSD card, but inserting one is not recognised.
> 
> The reason is that the card detect gpio (gpio5_152)
> is not configured and attached to the mmc1 interface
> driver and the mmc driver does not poll by default.
> 
> Hence we add pinmux and gpio setup for the SDCARD_NCD
> signal.

Applying into omap-for-v4.13/dt thanks.

Tony

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web